Sol-gel–mediated synthesis of TiO2 nanocrystals: Structural,optical, and electrochemical properties

Nanoparticles of titanium dioxide were prepared using the sol-gel method without any impurity. Rietveld refinement of XRD data confirmed the anatase phase of synthesized nanoparticles with space group I4_1/amd (141). XRD pattern revealed the crystalline nature of synthesized nanopowder. The average crystallite size of synthesized nanoparticles was calculated 7.5 nm. The electrochemical performance of synthesized TiO₂ nanopowder was investigated as working electrode. The electrochemical reaction was found diffusion-controlled as observed from cyclic voltammetry (CV) studies at different scan rates. The diffusion-controlled charge storage mechanism also confirmed by charge transfer resistance and Warburg impedance, as calculated from the EIS analysis. SEM micrograph showed the plate-like structure grown in cluster cloud of particles of synthesized TiO₂ nanocrystals. Absorbance and optical bandgap were obtained using UV-Vis spectra. De-convoluted PL spectra provided the emission pattern from the ultra-violet region to green region due to the presence of interstitial oxygen vacancies. The tune bandgap with EIS measurements of synthesized TiO₂ nanoparticles offers its potential application in energy storage devices and photovoltaic applications.     

Physical properties of V-doped TiO2 nanoparticles synthesized by sonochemical-assisted process

V-doped TiO₂ nanoparticles were synthesized by sonochemical process using titanium isopropoxide as a titanium source, vanadyl acetylacetonate as a dopant source. Sonication was conducted using sonic horn operated at 20 kHz for 20 min until the completely precipitated product was reached. The as-synthesized precipitates with various vanadium dopant (1–5 mol %) were calcined at 500–1000 °C for 4 h. The relevant physical properties of the nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscope (TEM). The anatase phase TiO₂ nanoparticles can be synthesized by sonochemical process. Post calcinations process results in the anatase-to-rutile phase transformation and the enhancement in crystallinity with increasing temperature. The results also indicate good incorporation of V ions in TiO₂ lattices and significant effect of V dopant on alternation of interplanar spacing of TiO₂.     

Preparation,characterization and photocatalytic activity of a novel nanostructure composite film derived from nanopowder TiO2 and sol–gel process using organic dispersant

A novel sol–gel-derived titanium dioxide nanostructure composite has been prepared by spin-coating and investigated for the purpose of producing films. The processing of the composite sol–gel photocatalysts involved utilizing of precalcinated nanopowder titanium dioxide as filler mixed with sol and heat treated. The sol solution was prepared by adding titanium tetra isopropoxide (Ti(OPr)₄ or TTP) to a mixture of ethanol and HCl 35.5% (mole ratio TTP:HCl:EtOH:H₂O = 1:1.1:10:10), then a solution of 2 wt% methylcellulose was added and stirred at room temperature. Precalcinated TiO₂ nanopowder was dispersed in the sol and the prepared mixture was deposited on the microscope glass slide by spin-coating. The inhomogeneity problem in preparation of composite film which causes peeling off and cracking after calcination due to the shrinkage of the films with thermal treatment were overcome by using methylcellulose (MC) as a dispersant. The composite heat treated at approximately 500 °C has the greatest hardness value. Surface morphology of composite deposits by scanning electron microscopy (SEM) showed remarkable increase in the composite surface area. Evaluation of the adhesion and bonding strength between the coating and substrate was carried out by the scratch test technique. The minimum load which caused the complete coating removal, for composite thick film was 200 g/mm² which indicates a strong bond to the substrate. Photocatalytic activity of the composite film was evaluated through the degradation of a textile dye, Light Yellow X6G (C.I. Reactive Yellow 2) as a model pollutant and were compared with those of similar composite thick film without MC, thin film of TiO₂ and TiO₂ nanopowder. The results show that the photocatalytic activity and stability of the composite films are higher than those of nanopowder TiO₂. However, a remarkable increase in the composite surface and good mechanical integrity make this composite film a viable alternative for commercial applications.     

Influence of feedstock concentration on tetragonality and particle size of hydrothermally synthesized barium titanate powders

Barium titanate (BaTiO₃) powders were synthesized through hydrothermal process with Ba(OH)₂·8H₂O and TiO₂. By increasing the feedstock concentration (FC) from 0.25 to 1.50 M, BaTiO₃ powders maintain a stable average particle size (~180 nm and ~6.4441 m²/g) with an increasing tetragonality (c/a: 1.0065–1.0075). Johnson-Mehl-Avrami and standard reaction rate equations were adopted to analyze the kinetic process of BaTiO₃ formation. The reaction is governed by first-order and phase-boundary-controlled mechanism for 0.25 M and 1.50 M, respectively. Lower extent of reaction is believed to lead to the better tetragonality for BaTiO₃ powders fabricated with higher FC. On the other hand, the relative stable particle size is correlated with the unvaried nucleation frequency and grain growth rate with various FC. This work can provide a guideline to manipulate the properties of BaTiO₃ powders used in electronic industry.     

Effect of mechanical milling on structural,dielectric and magnetic properties of BaTiO3–Ni0.5Co0.5Fe2O4 multiferroic nanocomposites

The coexistence of ferroelectricity and ferromagnetism has triggered great interest in multiferroic materials. Multiferroic with strong room temperature magnetoelectric (ME) coupling can provide a platform for future technologies. In this paper, we have investigated the effect of mechanical milling on the properties of multiferroic nanocomposites synthesized by mixing barium titanate (BaTiO₃) (BT) and nickel cobalt ferrite (Ni_0.5Co_0.5Fe₂O₄) (NCF). This process has resulted into reliable disposal of a given quantity of NCF nanoparticles in BT grid and composite samples of different particle sizes (<500 nm) have been obtained by varying the duration of ball-milling for 12, 24, and 48 h. The presence of NCF within BT powder has been confirmed by X-ray Diffraction (XRD) and magnetization measurements (MH). Structural analysis was performed by using Reitveld refinement method that shows that the tetragonality of BaTiO₃ structure get reduced in submicron range. Variations in ferroelectric and dielectric properties with reduction in particle size/milling duration have been studied by P-E loop tracer and Impedance analyzer. The dielectric constant value of 400 has been observed for BT-NCF0 that increases to 9.7 K for composite sample ball mill at 48 h whereas remnant polarization increases to 4.2 μC/cm². These composites with high dielectric constant that changes with temperature and particles size find application in energy storage devices, sensor and memory devices.     

Hydrothermal synthesis of BaTiO3 from different Ti-precursors and microstructural and electrical properties of sintered samples with submicrometric grain size

Barium titanate submicrometric particles were synthesized at 180 °C in a closed PTFE-lined stainless steel reactor with continuous stirring. Precursors used for titanium were Degussa P25 TiO₂ or titanium isopropoxide (TIP). Barium hydroxide (Ba(OH)₂) was added in a Ba/Ti = 1.1 molar ratio and KOH was used as mineralizer. The obtained powders were characterized by XRD and Raman spectroscopy. Powders were uniaxially pressed into discs and sintered at 1250 °C. The resulting microstructures were characterized by XRD, SEM, and Raman spectroscopy. Electrical measurements were carried out in order to characterize the ferroelectric behavior. The Ti precursor determined the sample density and grain size distribution and, consequently, the electrical response.     

Aqueous Colloidal Stability Evaluated by Zeta Potential Measurement and Resultant TiO2 for Superior Photovoltaic Performance

Controlling the morphological structure of titanium dioxide (TiO₂) is crucial for obtaining superior power conversion efficiency for dye‐sensitized solar cells. Although the sol–gel‐based process has been developed for this purpose, there has been limited success in resisting the aggregation of nanostructured TiO₂, which could act as an obstacle for mass production. Herein, we report a simple approach to improve the efficiency of dye‐sensitized solar cells (DSSC) by controlling the degree of aggregation and particle surface charge through zeta potential analysis. We found that different aqueous colloidal conditions, i.e., potential of hydrogen (pH), water/titanium alkoxide (titanium isopropoxide) ratio, and surface charge, obviously led to different particle sizes in the range of 10–500 nm. We have also shown that particles prepared under acidic conditions are more effective for DSSC application regarding the modification of surface charges to improve dye loading and electron injection rate properties. Power conversion efficiency of 6.54%, open‐circuit voltage of 0.73 V, short‐circuit current density of 15.32 mA/cm², and fill factor of 0.73 were obtained using anatase TiO₂ optimized to 10–20 nm in size, as well as by the use of a compact TiO₂ blocking layer.     

Synthesis and characterization of TiO2 nanoparticles

TiO₂ nanoparticles were synthesized by thermal decomposition of a precipitate obtained from a precursor solution of titanium isopropoxide (IV) and isopropyl alcohol. The as-prepared precipitate was heated at various temperatures and the obtained samples were morphologically, texturally and structurally characterized using TGA–DTA, gas adsorption, SEM, XRD and FTIR. The UV–vis radiation absorption and the photocatalytic activity also were verified. The TiO₂ sample heated at 300 °C shows the best results to be applied as blocker in solar skin protector.     

Mechanism of the formation,growth and transformation of BaTi2O5 nanorods synthesized by one-step in molten-salts

In this work, the high-yield synthesis of BaTi₂O₅ (BT2) nanorods with a growth direction at [020] was achieved in the medium of KCl salt through the molten-salt synthesis (MSS) with Ba(NO₃)₂ and anatase TiO₂ as reactants. By optimizing the involved reaction factors including particle sizes, thermal holding durations and crystalline forms of TiO₂, ultra-pure BT2 nanorods with uniform size were obtained after 45 min of heating at 950 °C. Meanwhile, anatase and rutile TiO₂ were respectively mixed and calcined in KCl to study the formation and transformation process of BT2 nanorods in detail. It was found that anatase TiO₂ tends to merge together and convert into rutile TiO₂. In particular, the formed rutile TiO₂ reacts with BaO and BaTiO₃ to spontaneously form BT2 nanorods without any presence of rod-like templates. Besides, BT2 takes priority over K₂Ti₆O₁₃ to generate the corresponding nanorods in the molten salt with high content of K⁺. In addition, the O₂ in air also promotes the formation of nanorods. According to the experimental results, a probable mechanism for the initial formation, subsequent growth and transformation of BT2 nanorods was thus proposed, which helps to facilitate the preparation of BT2-based one-dimensional nanomaterials.     

One-step hydrothermal synthesis of a TiO2-Ti3C2Tx nanocomposite with small sized TiO2 nanoparticles

A TiO₂-Ti₃C₂T_x nanocomposite was prepared using a simple and facile one-step hydrothermal method. The small sized TiO₂ nanoparticles were synthesized and assembled on the surface of Ti₃C₂T_x nanosheets using Ti₃C₂T_x itself as titanium source by in-situ technique. The microstructure of TiO₂-Ti₃C₂T_x nanocomposite was characterized by means of XRD、FESEM、TEM、XPS and Raman, respectively. The effects of ethanol and hydrothermal holding time on the size of TiO₂ nanoparticles were investigated. The results show that adding proper amount of ethanol into pure water results in decrease of the size of TiO₂ nanoparticles. Under ethanol-water mixed solution, increasing the time of hydrothermal treatment results in growth and even aggregation of TiO₂ nanoparticles. The TiO₂ nanoparticles with average particle size of 30 nm were obtained when the hydrothermal treatment was conducted in ethanol-water mixed solution at 200 ℃ for 12 h.     

Phase development of barium titanate from chemically modified-amorphous titanium (hydrous) oxide precursor

A synthesis procedure for barium titanate involving a chemically modified titanium precursor has been developed. Using a titanium isopropoxide precursor modified with acetylacetone and barium acetate, coprecipitated gels were obtained by addition to a KOH solution. Direct precipitation of cubic BaTiO₃ from such precursor suspensions was obtained under hydrothermal conditions. The pH value was found to be a critical reaction parameter such that production of phase pure BaTiO₃ required high pH (>13.0), a finding consistent with thermodynamic predictions of the Ba–Ti–H₂O stability system and prior hydrothermal syntheses. It was determined that phase-pure barium titanate can be synthesized at temperatures as low as 50 °C and that higher reaction temperatures accelerate the crystallization process. The particle size of the synthesized powder ranged from 50 to 350 nm for the synthesis conditions explored in the current work.. It was demonstrated that particle size can be controlled by proper selection of the hydrothermal synthesis conditions such as reaction concentration, temperature, and time. The chemically modified synthesis produces barium titanate more rapidly at lower reaction temperatures than previously reported for similar syntheses.     

Visible light induced self-cleaning performance of iron-doped TiO2 nanoparticles for surface applications

This study aimed to enhance the visible light photosensitivity of TiO₂ nanoparticles for self-cleaning applications by doping with Fe³⁺. Nanocrystalline undoped and Fe-doped TiO₂ (Ti_1 − xFe_xO₂, x = .01–.04) were synthesized via sol–gel method. The results demonstrated that Fe-doped TiO₂ nanoparticles exhibited visible light sensitivity and self-cleaning properties. An increased Fe concentration resulted in a red shift in the absorption band edge. Fe_0.03-doped TiO₂ with an average particle size of ∼21 nm, a crystallite size of ∼12 nm, and a band gap of ∼2.86 eV showed the highest photocatalytic activity (60% methylene blue degradation) and super-hydrophilicity (water droplet contact angle 9°) under visible light radiation. These findings highlight the potential of Fe-doped TiO₂ nanoparticles as a promising material for self-cleaning applications.     

Continuous supercritical hydrothermal synthesis of controlled size and highly crystalline anatase TiO2 nanoparticles

The production of size-controlled and highly crystalline anatase titanium dioxide (TiO₂) nanoparticles was carried out under supercritical hydrothermal conditions (400 °C and 30 MPa) in a continuous flow apparatus with a residence time of 1.7 s. An industrially useful titanium sulfate (Ti(SO₄)₂) solution was used as the starting solution. KOH was used to change TiO₂ solubility and pH and thereby control the particle size. The apparatus comprised two micromixers operating at high temperature. The first mixer was configured to prepare a supercritical aqueous KOH solution from supercritical water (SC-H₂O) and KOH. The second mixer combined this KOH solution with aqueous Ti(SO₄)₂. In situ pH control and homogeneous nucleation were achieved in the second mixer. This two-step high-temperature micromixing process produced reasonably small and homogeneous particles. The particles were characterized by transmission electron microscopy (TEM) on the basis of morphology, average size, and size distribution, together with the coefficient of variation (CV). Powder X-ray diffraction (XRD) was used to determine the crystal structure and crystalline size. The weight loss of material was found through thermogravimetric (TG) measurement. The crystal structure of the product was assigned to the anatase single phase. The average particle size could be adjusted in the range 13–30 nm while maintaining a CV of 0.5 by changing the KOH concentration. At low pH, the powder XRD results for crystallite size were in good agreement with the average particle size measured by TEM, confirming that the products were single crystals of TiO₂ nanoparticles. When the reactor temperature was increased from 400 to 500 °C, the weight loss decreased from 4.5 to 2.5%, keeping the average particle size and high crystallinity of the TiO₂ particles unchanged.     

Structural and luminescence properties of undoped,Nd3+ and Er3+ doped TiO2 nanoparticles synthesized by flame spray pyrolysis method

Bulk and thin film forms of titanium dioxide (TiO₂) have been studied many times due to its very promising optical properties. In this study, low-cost flame spray pyrolysis (FSP) synthesis of Nd³⁺/Er³⁺doped TiO₂ nanoparticles has been reported for the first time. The produced particles were post-annealed after FSP process at 550 °C in order to obtain crystalline structure. The phase and elemental analysis of the produced materials were performed by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS), respectively. The surface morphology, accurate size and specific surface area of the primary particles were identified using scanning electron microscopy (SEM) and particle size analyser. Luminescent properties of the produced nanoparticles were investigated by steady state and time resolved fluorescence spectra. Doping of TiO₂ nanoparticles with the rare earths of Nd³⁺and Er³⁺resulted in visible and near-infrared light emission when excited at 364 nm. The utilized nanoparticles yielded bi-and tri-exponential decay curves. Additionally, they exhibited typical upconversion luminescence when radiated by 810 nm.     

Synthesis of carbon-doped photocatalytic TiO2 nano-powders by AFD process

Carbon-doped titanium dioxide (TiO₂) nano-powders were synthesized by the aerosol flame deposition (AFD) process using 2-butanol liquid sol containing 20 wt% of titanium isopropoxide (TTIP). They were mesoporous nano-powders with particle size ranging from 20 to 40 nm, the specific surface area of 36 m²/g, and the pore size of 19 nm. They had the anatase structure and showed high photocatalytic activity not only under UV-A light but also under fluorescent light. They reduced the concentration of methylene blue (MB) from 5.0 to 1.5 ppm within 2 h under UV-A light and from 5.0 to 2.0 ppm within 4 h under fluorescent light. And, they killed 99% of Escherichia coli (E. coli) cells within 2 h and bacterial growth of the E. coli was not observed for 12 h under both UV-A and fluorescent lights.     

Synthesis and Characterization of Bowl-Like Single-Crystalline BaTiO3 Nanoparticles

Novel bowl-like single-crystalline BaTiO₃ nanoparticles were synthesized by a simple hydrothermal method using Ba(OH)₂·8H₂O and TiO₂ as precursors. The as-prepared products were characterized by XRD, Raman spectroscopy, SEM and TEM. The results show that the bowl-like BaTiO₃ nanoparticles are single-crystalline and have a size about 100–200 nm in diameter. Local piezoresponse force measurements indicate that the BaTiO₃ nanoparticles have switchable polarization at room temperature. The local effective piezoelectric coefficient d₃₃ ^* d_{33}^{ * } is approximately 28 pm/V.     

Preparation of titania/carbon nanotube composites using supercritical ethanol and their photocatalytic activity for phenol degradation under visible light irradiation

Titanium dioxide (anatase, TiO₂) nanoparticles have been successfully deposited onto multi-walled carbon nanotubes (MWCNTs) via hydrolysis of titanium isopropoxide in supercritical ethanol. The as-prepared composites were characterized by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. It was demonstrated that the MWCNTs were decorated with well-dispersed anatase nanoparticles less than 7 nm in diameter. The size and loading content of the nanoparticles on MWCNTs could be tuned by manipulating the ratio of precursor to MWCNTs, and the formation mechanism of the composites was also discussed. The absorbance spectrum of the resultant TiO₂/MWCNT composites extended to the whole UV-visible region due to the decoration of TiO₂ on MWCNTs. The TiO₂/MWCNT composites were used as photocatalyst for phenol degradation under irradiation of visible light, which showed higher efficiency compared to a mixture of TiO₂ and MWCNTs.     

Effects of TiO2 starting materials on the synthesis of Li2ZnTi3O8 for lithium ion battery anode

Lithium zinc titanate (Li₂ZnTi₃O₈) anode materials have been successfully synthesized using rutile-TiO₂ with different particle sizes as titanium sources via a molten-salt method. Various physical and electrochemical methods are applied to characterize the effects of TiO₂ particle sizes on the structures and physicochemical properties of the Li₂ZnTi₃O₈ materials. When the particle size of TiO₂ is too small (10 nm), it is difficult to homogeneously mix TiO₂ with the other raw materials. Thus, the final product Li₂ZnTi₃O₈ has poor crystallinity, large particle size, small specific surface area, pore volume and average pore diameter, which are disadvantageous to its electrochemical performance. Using TiO₂ with the proper particle size of 100 nm as the titanium source, the Li₂ZnTi₃O₈ (R-100-LZTO) with excellent electrochemical performance can be obtained. At 1 A g⁻¹, 175.8 and 163.6 mA h g⁻¹ are delivered at the 1st and the 200th cycles, respectively. The largest capacities of 163, 133.3 and 122.5 mA h g⁻¹ are delivered at 2.5, 5 and 6 A g⁻¹, respectively. The good high-rate performance of the R-100-LZTO originates from the good crystallinity, small particle size, large specific surface area and average pore diameter, low charge-transfer resistance and high Li⁺ diffusion coefficient.     

Synthesis of TiO<Subscript>2</Subscript> Nanoparticles by Microemulsion/Heat Treated Method and Photodegradation of Methylene Blue

In this work, TiO₂ nanoparticles were prepared by microemulsion (ME)/heat treated method and its photodecomposition property of methylene blue. Microemulsion (ME) consisted of water, cyclohexane and an anionic surfactant such as bis (2-ethylhexyl) sodium sulfosuccinate (AOT). Titanium tetraisopropoxide (TTIP) was dropped into the ME solution and then then TiO₂ nanoparticles were formed by the hydrolysis reaction between TTIP in the organic solvent and the water in the core of ME. The smallest diameter of the particles was 20 nm in the system of cyclohexane with surfactant when the molar ratio of water to surfactant was 2. The effect of the process parameters (water/surfactant ratio, different temperatures) on the final characteristics has been investigated, in terms of structural phase and particle size. The TiO₂ nanoparticles were characterized by means of X-ray diffraction, Transmission and scanning electron microscopy, Fourier-Transformed infrared and differential thermal analysis. TiO₂ nanoparticles prepared in this condition were collected as amorphous powder, and converted to anatase phase at less than 350 °C, which is lower than the ordinal phase transition temperature. The crystallite size and crystallinity increase with an increase of heat treated s temperature. The particles are shown to have a spherical shape and have a uniform size distribution. The size of nanoparticles raises with an increase of water/surfactant ratio. In the photocatalytic decomposition of methylene blue, the photocatalytic activity is mainly determined by the crystallinity of TiO₂. In addition, the TiO₂ heat treated at 350 °C shows the highest activity on the photocatalytic decomposition of methylene blue (k = 1.7 × 10⁻² min⁻¹).     

Optical and structural properties of cost-effective nanostructured calcium titanate blue phosphor

The current study reports nanostructured CaTiO₃ powder produced by two different novel modified sol-gel methods. The chemical reaction between the calcium oxide (CaO) extracted from chicken eggshell (ES) and titanium (IV) isopropoxide (TTIP) leads to the synthesis of calcium titanate nanopowder. Further leaf extract has also been added in one method which shows the significant effect to reduce particle size up to a certain extent. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM) were examined to confirm the nanometric particle size. Further, the crystalline structure and phase involvement were also investigated by Rietveld refinement. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible (UV–Vis), and photoluminescence spectra (PL) characterization were used to study the functional groups, elemental composition, and optical properties of the material. The photoluminescence emission that occurred in the sample was due to the distortion between [TiO₆] – [TiO₆] complex clusters causing a difference in the charge density, which can promote a charge transfer between these clusters. The CIE chromaticity coordinates were determined and it shows that the synthesized sample is a promising candidate for the blue color phosphor application. The present phosphors were highly useful for UV chip excited white LED applications.