共查询到18条相似文献,搜索用时 125 毫秒
1.
介绍了国产CR-244型氯丁橡胶技术性能和加工应用技术。其中的可接枝CR-244将是氯丁胶粘剂行业很有潜力的新产品。 相似文献
2.
介绍了国产CR-244型氯丁橡胶技术性能和加工应用技术。其中可接枝的CR-244将是氯丁胶粘结剂行业很有潜力的新产品,该产品的工业化生产改善了国产CR-244不能与MMA接枝的缺陷。接枝共聚合的胶粘剂技术性能达到GB7126-86标准要求,接枝效果与A90相近。 相似文献
3.
通过选用3种黏度相近的氯化橡胶产品:CR-2水相法氯化橡胶、KL-10国产溶剂法氯化橡胶及GW—10进口溶剂法氯化橡胶,进行对比试验,检测了3种产品的常规性能,分析了红外光谱,并分别进行了配漆试验。结果表明:水相法氯化橡胶的质量指标达到了溶剂型氯化橡胶产品的质量指标,热稳定性优于国产溶剂型氯化橡胶产品,与进口产品性能相当;配制成涂料的各项性能符合船舶漆产品的技术要求,稳定性与溶剂型产品相当。 相似文献
4.
5.
用固相接法制得马来酸酐接枝聚丙烯,接枝率为2%~2.5%(100gPP含马来酸酐的克数),用国产XLY-Ⅱ型毛细管流变仪进行了流变性能研究。 相似文献
6.
7.
8.
CaCO填充HDPE代替ABS的研究 总被引:1,自引:0,他引:1
翟力暝 《现代塑料加工应用》1997,9(1):29-32
通过偶联和接枝技术实现了超细CaCO3与HDPE的接枝偶联,并在加和阻燃剂后,测定了力学性能和阻燃性。结果表明:偶联与接枝技术均能改善性能;两者协同作用时,填充复合体系力学性能改善最显著;无机和有机溴系阻燃剂在适当比例及用时产生协同作用,能极大地提高阻燃性。 相似文献
9.
本文介绍了一些聚硅氧烷的接枝共聚物,它们的合成与普通聚合物类似,接枝共聚技术可用于橡胶,塑料及无机材料的改性,经改性后聚合物溶合了两者的性能,其应用领域进一步扩展。 相似文献
10.
11.
12.
13.
14.
Edith M. M. Souza Wanderley da Costa Leonardo G. A. Silva Hélio Wiebeck 《Journal of Adhesion Science and Technology》2016,30(15):1689-1699
This research is an innovation proposal for magnetic conditioning of the aqueous-based polychloroprene contact adhesive with the purpose of increasing the adherence capacity between the adhesive and the substrate. Today, the aqueous-based polychloroprene contact adhesive presents an adhesion capacity variation between 1.15 and up to 2.75 kgf/cm2. On the other hand, the solvent-based polychloroprene adhesives support average tensions of shearing of 3.8 kgf/cm2. To promote an increase in adhesion to the aqueous-based polychloroprene contact adhesive, we formulated one adhesive using a nano-additive, carbon dioxide as catalyst, and a magnetic conditioning process before the phase of application on the substrates. The results obtained show an average increase of 292% in the shearing tension of the adhesive magnetically conditioned when compared with an adhesive of same formulation without the magnetic conditioning and when compared to the commercial aqueous-based polichloroprene adhesive, the increase reaches 122%. 相似文献
15.
Malcolm J. Welch 《Polymer International》1979,11(2):59-63
Some information about the general and specific aspects of polychloroprene contact adhesive composition is given. Reference is made to application viscosity, the chemical and specific adhesive purpose of ingredients and performance related to composition and the method of stress. Some preliminary results, about the study of methods for determining how adhesive films form from complex mixtures are included. 相似文献
16.
17.
18.
《Journal of Adhesion Science and Technology》2013,27(8):627-638
The adhesion properties of polychloroprene can be improved by addition of such materials as piperylene–styrene co-polymer (PSC), VeoVa-10 polymer, VeoVa-11/methyl methacrylate/2ethylhexyl acrylate co-polymer (VeoVa-11/MMA/2EHA) and poly(vinyl acetate) waste (wPVAc). Here, the relationship between adhesion properties and surface tension of polychloroprene was investigated. Contact angle measurements have been used to study the effects of nature and content of polymeric additives on the adhesion and surface properties of polychloroprene. Low-surface-tension VeoVa-10 polymer has the tendency to migrate to the surface of polychloroprene; thus, adhesion is determined mainly by this additive property. Enrichment of polychloroprene film bottom layer by the additive was observed using high-surface-tension PSC and wPVAc. In this case, the adhesion properties of polychloroprene depend on the interactions at the interface. Adhesion properties of polychloroprene were found to depend not only on compatibility between adhesive components, but also on compatibility between the adherend and the adhesive. 相似文献