Combined Steam and Carbon Dioxide Reforming of Methane on Ni/MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: Effect of CeO<Subscript>2</Subscript> Promoter to Catalytic Performance

Abstract  

The catalytic performance during combined steam and carbon dioxide reforming of methane (SCR) was investigated on Ni/MgAl₂O₄ catalyst promoted with CeO₂. The SCR catalyst was prepared by co-impregnation method using nickel and cerium metal precursors on hydrotalcite-like MgAl₂O₄ support. In terms of catalytic activity and stability, CeO₂-promoted Ni/MgAl₂O₄ catalyst is superior to Ni–CeO₂/Al₂O₃ or Ni/MgAl₂O₄ catalysts because of high resistance to coke formation and suppressed aggregation of nickel particles. The role of CeO₂ on Ni/MgAl₂O₄ catalyst was elucidated by carrying out the various characterization methods in the viewpoint of the aggregation of nickel particles and metal-support interactions. The observed superior catalytic performance on CeO₂-promoted Ni/MgAl₂O₄ catalyst at the weight ratio of MgO/Al₂O₃ of 3/7 seems to be closely related to high dispersion and low aggregation of active metals due to their strong interaction with the MgAl₂O₄ support and the adjacent contact of Ni and CeO₂ species. The CeO₂ promoter also plays an important role to suppress particle aggregation by forming an appropriate interaction of NiO–CeO₂ as well as Ni–MgAl₂O₄ with the concomitant enhancement of mobile oxygen content.     

Performance of Ni catalyst supported on La-hexaaluminate in CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

CO₂ reforming of CH₄ was performed using Ni catalyst supported on La-hexaaluminate which has been an well-known material for high-temperature combustion. La-hexaaluminate was synthesized by sol-gel method at various conditions where different amount of Ni (5–20 wt%) was loaded. Ni/La-hexaaluminate experienced 72 h reaction and its catalytic activity was compared with that of Ni/Al₂O₃, Ni/La-hexaaluminate shows higher reforming activity and resistance to coke deposition compared to the Ni/Al₂O₃ model catalyst. Coke deposition increases proportionally to Ni content. Consequently, Ni(5)/La-hexaaluminate(700) is the most efficient catalyst among various Ni/La-hexaaluminate catalysts regarding the cost of Ni in Ni(X)/La-hexaaluminate catalysts. BET surface area, XRD, EA, TGA and TPO were performed for surface characterization. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Ni-Co bimetallic catalyst for CH<Subscript>4</Subscript> reforming with CO<Subscript>2</Subscript>

A co-precipitation method was employed to prepare Ni/Al₂O₃-ZrO₂, Co/Al₂ O₃-ZrO₂ and Ni-Co/Al₂O₃-ZrO₂ catalysts. Their properties were characterized by N₂ adsorption (BET), thermogravimetric analysis (TGA), temperature-programmed reduction (TPR), temperature-programmed desorption (CO₂-TPD), and temperature-programmed surface reaction (CH₄-TPSR and CO₂-TPSR). Ni-Co/Al₂O₃-ZrO₂ bimetallic catalyst has good performance in the reduction of active components Ni, Co and CO₂ adsorption. Compared with mono-metallic catalyst, bimetallic catalyst could provide more active sites and CO₂ adsorption sites (C + CO₂ = 2CO) for the methane-reforming reaction, and a more appropriate force formed between active components and composite support (SMSI) for the catalytic reaction. According to the CH₄-CO₂-TPSR, there were 80.9% and 81.5% higher CH₄ and CO₂ conversion over Ni-Co/Al₂O₃-ZrO₂ catalyst, and its better resistance to carbon deposition, less than 0.5% of coke after 4 h reaction, was found by TGA. The high activity and excellent anti-coking of the Ni-Co/Al₂O₃-ZrO₂ catalyst were closely related to the synergy between Ni and Co active metal, the strong metal-support interaction and the use of composite support.     

Doped Ni Catalysts for Methane Reforming with CO<Subscript>2</Subscript>

Pb, Sb, Bi and Te doped Ni catalysts were prepared and used for methane reforming with CO₂ in order to diminish coke deposition. It was found that small amounts of Pb doped Ni catalysts exhibited excellent coke resistance ability with minor loss of the reforming activity. As the added amount of Pb increased from 0 to 0.015 (mole ratio between Pb/Ni), coke formation rate decreased from 166.7 mg-coke/g-cat h (on Ni/SiO₂) to 0, while the reforming activity decreased slightly from 73.2% to 63.3% (conversion of CO₂) at 800 °C, 60,000 ml(STP)/g-cat·h (CH₄ CO₂=1:1, no dilution gas in feed). Higher amounts of Pb and Sb, Bi, Te made Ni catalyst deactivated for methane reforming with CO₂.     

CO and CO<Subscript>2</Subscript> Methanation Over Ni/SiC and Ni/SiO<Subscript>2</Subscript> Catalysts

Ni/SiC and Ni/SiO₂ catalysts prepared by both wet impregnation (WI) and deposition–precipitation (DP) methods were compared for CO and CO₂ methanation. The prepared catalysts were characterized using N₂ physisorption, temperature-programmed reduction with H₂ (H₂-TPR), H₂ chemisorption, pulsed CO₂ chemisorption, temperature-programmed desorption of CO₂ (CO₂-TPD), transmission electron microscopy, and X-ray diffraction. H₂-TPR analysis revealed that the catalysts prepared by DP exhibit stronger interaction between the nickel oxides and support than those prepared by WI. The former catalysts exhibit higher Ni dispersions than the latter. The catalytic activities for both reactions over Ni/SiC and Ni/SiO₂ catalysts prepared by WI increase on increasing the Ni content from 10 to 20 wt%. The Ni/SiC catalyst prepared by DP shows higher catalytic activity for CO and CO₂ methanation than that of the Ni/SiC catalyst prepared by WI. Furthermore, it exhibits the highest catalytic activity for CO methanation among the tested catalysts. The high Ni dispersion achieved by the DP method and the high thermal conductivity enabled by SiC are beneficial for both CO and CO₂ methanation.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Effect of CeO<Subscript>2</Subscript>-addition sequence on the performance of CeO<Subscript>2</Subscript>-modified Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst in autothermal reforming of iso-octane

Two types of CeO₂-modified Ni/Al₂O₃ catalysts were prepared by a consecutive impregnation method with different sequences in the impregnation of Ni and CeO₂, and their performance in autothermal reforming (ATR) of isooctane was investigated. Catalysts prepared by adding CeO₂ prior to the addition of Ni, Ni/CeO₂-Al₂O₃, produced larger amounts of hydrogen than those obtained using catalysts prepared by adding the two components in an opposite sequence, Ni-CeO₂/Al₂O₃. The results of H₂ chemisorption and temperature-programmed reduction revealed that added CeO₂ increased the dispersion of the Ni species on Al₂O₃ and suppressed the formation of NiAl₂O₄ in the catalyst such that large amounts of Ni species were present as NiO, the active species for the ATR. The elemental and thermogravimetric analyses of deactivated catalysts indicated that Ni/CeO₂-Al₂O₃, which showed a longer lifetime than Ni-CeO₂/Al₂O₃, contained lesser amounts and different types of coke on the surface.     

Reductive amination of ethanol to ethylamines over Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Ni(x)/Al₂O₃ (x=wt%) catalysts with Ni loadings of 5–25 wt% were prepared via a wet impregnation method on an γ-Al₂O₃ support and subsequently applied in the reductive amination of ethanol to ethylamines. Among the various catalysts prepared, Ni(10)/Al₂O₃ exhibited the highest metal dispersion and the smallest Ni particle size, resulting in the highest catalytic performance. To reveal the effects of reaction parameters, a reductive amination process was performed by varying the reaction temperature (T), weight hourly space velocity (WHSV), and NH₃ and H₂ partial pressures in the reactions. In addition, on/off experiments for NH₃ and H₂ were also carried out. In the absence of NH₃ in the reactant stream, the ethanol conversion and selectivities towards the different ethylamine products were significantly reduced, while the selectivity to ethylene was dominant due to the dehydration of ethanol. In contrast, in the absence of H₂, the selectivity to acetonitrile significantly increased due to dehydrogenation of the imine intermediate. Although a small amount of catalyst deactivation was observed in the conversion of ethanol up to 10 h on stream due to the formation of nickel nitride, the Ni(10)/Al₂O₃ catalyst exhibited stable catalytic performance over 90 h under the optimized reaction conditions (i.e., T=190 °C, WHSV=0.9 h^?1, and EtOH/NH₃/H₂ molar ratio=1/1/6).     

The difference in hydrogenation performance between Ni-in-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Ni-on-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for hydrotreating of crude 2-ethylhexanol

Two mesoporous material Ni/γ-Al₂O₃ catalysts were prepared and characterized by ICP-AES, XRD, and TPR. The differences in reaction activity between Ni-in-Al₂O₃ and Ni-on-Al₂O₃ were investigated for hydrotreating of crude 2-ethylhexanol. The results show that the Ni species (Ni-on-Al₂O₃) exhibit excellent hydrogenation activities at a wide range of H₂ pressure and space velocity, while the Ni species (Ni-in-Al₂O₃) exhibit similar activities with those of Ni-on-Al₂O₃ only at higher H₂ pressure and lower space velocity. Due to the presence of extensively exposed Ni species on the Ni-on-Al₂O₃ catalyst, its hydrogenation performance was increased significantly because of the low interphase mass transfer resistance.     

A Novel Process for Renewable Methane Production: Combining Direct Air Capture by K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Alumina Sorbent with CO<Subscript>2</Subscript> Methanation over Ru/Alumina Catalyst

CO₂ methanation over supported ruthenium catalysts is considered to be a promising process for carbon capture and utilization and power-to-gas technologies. In this work 4% Ru/Al₂O₃ catalyst was synthesized by impregnation of the support with an aqueous solution of Ru(OH)Cl₃, followed by liquid phase reduction using NaBH₄ and gas phase activation using the stoichiometric mixture of CO₂ and H₂ (1:4). Kinetics of CO₂ methanation reaction over the Ru/Al₂O₃ catalyst was studied in a perfectly mixed reactor at temperatures from 200 to 300 °C. The results showed that dependence of the specific activity of the catalyst on temperature followed the Arrhenius law. CO₂ conversion to methane was shown to depend on temperature, water vapor pressure and CO₂:H₂ ratio in the gas mixture. The Ru/Al₂O₃ catalyst was later tested together with the K₂CO₃/Al₂O₃ composite sorbent in the novel direct air capture/methanation process, which combined in one reactor consecutive steps of CO₂ adsorption from the air at room temperature and CO₂ desorption/methanation in H₂ flow at 300 or 350 °C. It was demonstrated that the amount of desorbed CO₂ was practically the same for both temperatures used, while the total conversion of carbon dioxide to methane was 94.2–94.6% at 300 °C and 96.1–96.5% at 350 °C.     

Ni/La<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> catalyst for hydrogen production from steam reforming of acetic acid as a model compound of bio-oil

Hydrogen production from steam reforming of acetic acid was investigated over Ni/La₂O₃-ZrO₂ catalyst. A series of Ni/La₂O₃-ZrO₂ catalysts were synthesized by sol-gel method coupled with wet impregnation, which was characterized by XRD, BET, TEM, EDS, TG, SEM and TPR. Catalytic activity of Ni/La₂O₃-ZrO₂ was evaluated by steam reforming of acetic acid at the temperature range of 550-750 °C. The tetragonal phase La_0.1Zr_0.9O_1.95 is formed through the doping of La₂O₃ into the ZrO₂ lattice and nickel species are highly dispersed on the support with high specific surface area. H₂ yield and CO₂ yield of Ni/La₂O₃-ZrO₂ catalyst with 15%wt Ni reaches 89.27% and 80.41% at 600 °C, respectively, which is attributed to high BET surface area and sufficient Ni active sites in strong interaction with the support. 15%wt Ni supported on La₂O₃-ZrO₂ catalyst maintains relatively stable catalytic activities for a period of 20 h.     

CO<Subscript>2</Subscript> methanation and co-methanation of CO and CO<Subscript>2</Subscript> over Mn-promoted Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

A series of Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts were prepared by an incipient wetness impregnation method. The effect of the Mn content on the activity of the Ni/Al₂O₃ catalysts for CO₂ methanation and the comethanation of CO and CO₂ in a fixed-bed reactor was investigated. The catalysts were characterized by N2 physisorption, hydrogen temperature-programmed reduction and desorption, carbon dioxide temperature-programmed desorption, X-ray diffraction and highresolution transmission electron microscopy. The presence of Mn increased the number of CO₂ adsorption sites and inhibited Ni particle agglomeration due to improved Ni dispersion and weakened interactions between the nickel species and the support. The Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts had improved CO₂ methanation activity especially at low temperatures (250 to 400 °C). The Mn content was varied from 0.86% to 2.54% and the best CO₂ conversion was achieved with the 1.71Mn-Ni/Al₂O₃ catalyst. The co-methanation tests on the 1.71Mn-Ni/Al₂O₃ catalyst indicated that adding Mn markedly enhanced the CO₂ methanation activity especially at low temperatures but it had little influence on the CO methanation performance. CO₂ methanation was more sensitive to the reaction temperature and the space velocity than the CO methanation in the co-methanation process.

Open image in new window

     

The deposition of coke from methane on a Ni/MgAl2O4 catalyst

Temperature-programmed reaction techniques and Raman spectroscopy were used to characterize coke species deposited on a 5% Ni/MgAl₂O₄ catalyst for dry reforming of methane. The CH₄ temperature-programmed decomposition profiles showed that the ignited decomposition temperatures of CH₄ increased from 273 to 378 °C when MgAl₂O₄ replaced the catalyst support γ-Al₂O₃. The temperature-programmed oxidation, temperature-programmed hydrogenation and temperature-programmed CO₂ reaction profiles showed that there were three carbon species (i.e. C_α, C_β and C_γ) on the catalyst surface. Raman spectroscopy showed that C_γ was graphite-like carbon species, which was responsible for catalyst deactivation. The C_γ species was the most inactive species toward H₂ and O₂, while it was unexpectedly more active toward CO₂. The unique reactivity of CO₂ with different coke specie could be ascribed to the carbonate, bidentate and formate species formation on MgAl₂O₄ surface. These surface species enhanced the oxidation of C_γ species and thus contributed to the high stability of Ni/MgAl₂O₄ catalyst.     

CO oxidation from syngas (CO and H<Subscript>2</Subscript>) using nanoporous Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

The concept of “waste-to-wealth” is spreading awareness to prevent global warming and recycle the restrictive resources. To contribute towards sustainable development, hydrogen energy is obtained from syngas (CO and H₂) generated from waste gasification, followed by CO oxidation and CO₂ removal. In H₂ generation, it is key to produce more purified H₂ from syngas using heterogeneous catalysts. In this respect, we prepared Pt/Al₂O₃ catalyst with nanoporous structure using precipitation method, and compared its catalytic activity with commercial alumina (Degussa). Based on the results of XRD and TEM, it was found that metal particles did not aggregate on the alumina surface and showed high dispersion. Optimum condition for CO conversion was 1.5 wt% Pt loaded on Al₂O₃ support, and pure hydrogen was obtained after removal of CO₂ gas.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Partial oxidation of methane over Ni/Ce-Zro<Subscript>2</Subscript>/θ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The catalytic behavior of Ni/Ce-ZrO₂/θ-Al₂O₃ has been investigated in the partial oxidation of methane (POM) toward synthesis gas. The catalyst showed high activity and selectivity due to the heat treatment of the support and the promotional effect of Ce-ZrO₂. It is suggested that the support was stabilized through the heat treatment of γ-Al₂O₃ and the precoating of Ce-ZrO₂, on which a protective layer was formed. Moreover, sintering of the catalyst was greatly suppressed for 24 h test. Pulse experiments of CH₄, O₂ and/or CH₄/O₂ with a molar ratio of 2 were systematically performed over fresh, partially reduced and well reduced catalyst. Results indicate that CH₄ can be partially oxidized to CO and H₂ by the reactive oxygen in complex NiO_x species existing over the fresh catalyst. It is demonstrated that POM over Ni/Ce-ZrO₂/θ-Al₂O₃ follows the pyrolysis mechanism, and both the carbonaceous materials from CH₄ decomposition over metallic nickel and the reactive oxygen species present on NiO_x and Ce-ZrO₂ are intermediates for POM.     

NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> Nanoparticles Stabilized by Porous Silica Shells

Abstract  

NiFe₂O₄ nanoparticles stabilized by porous silica shells (NiFe₂O₄@SiO₂) were prepared using a one-pot synthesis and characterized for their physical and chemical stability in severe environments, representative of those encountered in industrial catalytic reactors. The SiO₂ shell is porous, allowing transport of gases to and from the metal core. The shell also stabilizes NiFe₂O₄ at the nanoparticle surface: NiFe₂O₄@SiO₂ annealed at temperatures through 973 K displays evidence of surface Ni, as verified by H₂ TPD analyses. At 1,173 K, hematite forms at the surface of the metallic cores of the NiFe₂O₄@SiO₂ nanoparticles and surface Ni is no longer observed. Without the silica shell, however, even mild reduction (at 773 K) can draw Fe to the surface and eliminate surface Ni sites.     

Oxidative reforming of methane on structured Ni-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts

The catalytic properties of Ni/Al₂O₃ composites supported on ceramic cordierite honeycomb monoliths in oxidative methane reforming are reported. The prereduced catalyst has been tested in a flow reactor using reaction mixtures of the following compositions: in methane oxidation, 2–6% CH₄, 2–9% O₂, Ar; in carbon dioxide and oxidative carbon dioxide reforming of methane, 2–6% CH₄, 6–12% CO₂, and 0–4% O₂, and Ar. Physicochemical studies include the monitoring of the formation and oxidation of carbon, the strength of the Ni-O bond, and the phase composition of the catalyst. The structured Ni-Al₂O₃ catalysts are much more productive in the carbon dioxide reforming of methane than conventional granular catalysts. The catalysts performance is made more stable by regulating the acid-base properties of their surface via the introduction of alkali metal (Na, K) oxides to retard the coking of the surface. Rare-earth metal oxides with a low redox potential (La₂O₃, CeO₂) enhance the activity and stability of Ni-Al₂O₃/cordierite catalysts in the deep and partial oxidation and carbon dioxide reforming of methane. The carbon dioxide reforming of methane on the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst can be intensified by adding oxygen to the gas feed. This reduces the temperature necessary to reach a high methane conversion and does not exert any significant effect on the selectivity with respect to H₂.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> xerogel support on hydrogen production by steam reforming of LNG over Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> catalyst

An Al₂O₃-ZrO₂ xerogel (AZ-SG) was prepared by a sol-gel method for use as a support for a nickel catalyst. The Ni/AZ-SG catalyst was then prepared by an impregnation method, and was applied to hydrogen production by steam reforming of LNG. A nickel catalyst supported on commercial alumina (A-C) was also prepared (Ni/A-C) for comparison. The hydroxyl-rich surface of the AZ-SG support increased the dispersion of nickel species on the support during the calcination step. The formation of a surface nickel aluminate-like phase in the Ni/AZ-SG catalyst greatly enhanced the reducibility of the Ni/AZ-SG catalyst. The ZrO₂ in the AZ-SG support increased the adsorption of steam onto the support and the subsequent spillover of steam from the support to the active nickel sites in the Ni/AZ-SG catalyst. Both the high surface area and the well-developed mesoporosity of the Ni/AZ-SG catalyst improved the gasification of adsorbed surface hydrocarbons in the reaction. In the steam reforming of LNG, the Ni/AZ-SG catalyst showed a better catalytic performance than the Ni/A-C catalyst. Moreover, the Ni/AZ-SG catalyst showed strong resistance toward catalyst deactivation.     

Cu/ZnO/AlOOH catalyst for methanol synthesis through CO<Subscript>2</Subscript> hydrogenation

Catalytic conversion of CO₂ to methanol is gaining attention as a promising route to using carbon dioxide as a new carbon feedstock. AlOOH supported copper-based methanol synthesis catalyst was investigated for direct hydrogenation of CO₂ to methanol. The bare AlOOH catalyst support was found to have increased adsorption capacity of CO₂ compared to conventional Al₂O₃ support by CO₂ temperature-programmed desorption (TPD) and FT-IR analysis. The catalytic activity measurement was carried out in a fixed bed reactor at 523 K, 30 atm and GHSV 6,000 hr^?1 with the feed gas of CO₂/H₂ ratio of 1/3. The surface basicity of the AlOOH supported Cu-based catalysts increased linearly according to the amount of AlOOH. The optimum catalyst composition was found to be Cu : Zn : Al=40 : 30 : 30 at%. A decrease of methanol productivity was observed by further increasing the amount of AlOOH due to the limitation of hydrogenation rate on Cu sites. The AlOOH supported catalyst with optimum catalyst compositions was slightly more active than the conventional Al₂O₃ supported Cu-based catalyst.