Studies on poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) and its metal complexes

8‐Hydroxy‐4‐azoquinolinephenylmethacrylate (8H4AQPMA) was prepared and polymerized in ethyl methyl ketone (EMK) at 65°C using benzoyl peroxide as free radical initiator. Poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) poly(8H4AQPMA) was characterized by infrared and nuclear magnetic resonance techniques. The molecular weight of the polymer was determined by gel permeation chromatography. Cu(II) and Ni(II) complexes of poly(8H4AQPMA) were prepared. Elemental analysis of polychelates suggests that the metal‐ligand ratio is about 1 : 2. The polychelates were further characterized by infrared spectra, X‐ray diffraction, spectral studies, and magnetic moments. Thermal analyses of the polymer and polychelates were carried out in air. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1516–1522, 2006     

Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Synthesis and metal uptake studies on poly(8‐hydroxy‐5‐azoquinolinephenylacrylate‐formaldehyde) resin and its metal complexes

8‐hydroxy‐5‐azoquinolinephenylacrylate‐formaldehyde (8H5AQPA‐F) macromonomer was prepared from acryloylchloride, with condensation products of 8‐hydroxy‐5‐azoquinolinephenol‐formaldehyde, and polymerized in DMF at 70°C using benzoyl peroxide as free radical initiator. Poly(8H5AQPA‐F) was characterized by infrared and nuclear magnetic resonance spectroscopic techniques. Polychelates were obtained in alkaline solution of polymeric ligand, with the aqueous solution of Cu(II) and Ni(II). Elemental analysis of polychelates suggests that the metal to ligand ratio is about 1:2. The polymer metal complexes were also characterized by IR, XRD, magnetic moments, and thermal analysis. The effects of pH and electrolyte on the metal uptake behavior of the resin were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 797–802, 2007     

Synthesis,characterization, ion‐exchange,and antimicrobial study of poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] resin and its polychelates with lanthanides (III)

The polymeric ligand (resin) was prepared from 2‐hydroxy‐4‐methoxybenzophenone with 1,3‐propane diol in the presence of polyphosphoric acid as a catalyst on constant heating at 160°C for 13 h. The poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] (HMBP‐PD) form 1 : 2 metal/ligand polychelates (metal–polymer complexes) with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), and Dy(III). The polymeric ligand and its polychelates (metal–polymer complexes) were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR‐spectroscopy, NMR, and thermogravimetric analyses. The molecular weight was determined using number average molecular weight (M_n) by a vapor pressure osmometry (VPO) method. Activation energy ( E ) of the resin was calculated from differential scanning calorimetry (DSC). All the polychelates are paramagnetic in nature except La(III). Ion‐exchange studies at different electrolyte concentrations, pH, and rate have been carried out for lanthanides(III) metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Acrylic weak‐base anion exchangers and their behaviors in the retention process of some heavy‐metal cations

Two macroporous acrylonitrile/10% vinyl acetate/10% divinylbenzene copolymers as beads were obtained by the aqueous suspension copolymerization of the three comonomers in the presence of toluene as a diluent, which was used in two different amounts. These copolymers were chemically modified by their reactions with ethylenediamine, diethylenetriamine, and triethylenetetramine in the presence of water when the aminolysis–hydrolysis reaction of the nitrile groups and the hydrolysis reaction of the acetate groups occurred. From these reactions, weak‐base anion exchangers with high ion‐exchange capacities, between 1.6 and 2.2 mequiv/mL and 6.5 and 10.5 mequiv/g, were obtained. For these anion exchangers, the behaviors in the retention processes of the Ni(II), Cd(II), and Pb(II) cations were evaluated with the bath method. All the resins exhibited retention properties, but the retained amounts of the metal cations differed as a function of the resin and cation nature. Thus, the resin from the reaction with triethylenetetramine of the copolymer obtained in the presence of a larger amount of toluene could be considered the most suitable sorbent for the three metal cations, especially for Ni(II). Its maximum retention capacity for this cation was 2.67 mequiv/g of dried resin. From the noncompetitive and competitive retentions was observed the following selectivity order: Ni(II) > Cd(II) > Pb(II). The retention took place by the chelating processes between the functional groups with the ligand role, especially free amine groups, and metal cations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 930–938, 2005     

Synthesis and characterization of cassava starch graft poly(acrylic acid) and poly[(acrylic acid)‐co‐acrylamide] and polymer flocculants for wastewater treatment

Starch‐g‐poly(acrylic acid) and poly[(acrylic acid)‐co‐acrylamide] synthesized via chemically crosslinking polymerization were then each mixed with inorganic coagulants of aluminum sulfate hydrate [Al₂(SO₄)₃·18H₂O], calcium hydroxide [Ca(OH)₂], and ferric sulfate [Fe₂(SO₄)₃] in a proper ratio to form complex polymeric flocculants (CPFs). All CPFs exhibited low water absorbency than those of the uncomplexed superabsorbent copolymers. The color reduction by the CPFs was tested with both synthetic wastewater and selected wastewater samples from textile industries. The synthetic wastewater was prepared from a direct dye in a concentration of 50 mg dm^?3 at pH 7. The CPFs of poly[(acrylic acid)‐co‐acrylamide] with calcium hydroxide at a ratio of 1:2 is the most effective CPF for the wastewater color reduction. The CPF concentration of 500 mg dm^?3 could reduce the color of the synthetic wastewater containing the direct dye solution by 95.4% and that of the industrial wastewater by 76%. Starch‐g‐poly(acrylic acid)/Ca(OH)₂ CPF can reduce the synthetic direct dye and the industrial wastewater by 74% and 18%, respectively. Chemical oxygen demand, residual metal ion concentrations, pHs, turbidity of the wastewater were also investigated and the potential use of the complex polymer flocculants for textile wastewater treatment was indicated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2915–2928, 2006     

Synthesis,characterization, and catalytic activity of 4 mol % N,N′‐methylene bisacrylamide crosslinked poly(acrylic acid)–metal complexes

The metal‐ion complexation behavior and catalytic activity of 4 mol % N,N′‐methylene bisacrylamide crosslinked poly(acrylic acid) were investigated. The polymeric ligand was prepared by solution polymerization. The metal‐ion complexation was studied with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal uptake followed the order: Cu(II) > Cr(III) > Mn(II) > Co(II) > Fe(III) > Zn(II) > Ni(II). The polymeric ligand and the metal complexes were characterized by various spectral methods. The catalytic activity of the metal complexes were investigated toward the hydrolysis of p‐nitrophenyl acetate (NPA). The Co(II) complexes exhibited high catalytic activity. The kinetics of catalysis was first order. The hydrolysis was controlled by pH, time, amount of catalyst, and temperature. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 272–279, 2004     

Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Chelation properties of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) resins toward some divalent metal ions

The chelation behavior of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) [poly(2H4ABP) or polymer I ] obtained through the free‐radical polymerization of 2‐hydroxy‐4‐acryloyloxybenzophenone monomer and for crosslinked polymers prepared from the monomer and known amounts of the crosslinker divinylbenzene (DVB) [4 mol % of DVB for polymer II, 8 mol % of DVB for polymer III, and 16 mol 16% of DVB for polymer IV ] toward the divalent metal ions Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺ in aqueous solution was studied by a batch equilibration technique as a function of contact time and pH. The effect of the crosslinker, DVB, was also studied. The metal‐ion uptake of the polymers was determined with atomic absorption spectroscopy, and the highest uptake was achieved at pH 7.0 for polymers I, II, III, and IV. The selectivity and binding capacity of the resins toward the investigated divalent metal ions are discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis,characterization, and catalytic study of polymeric metal complexes derived from divalent transition metal ions with 2,4‐dihydroxy benzophenone and 2,4‐dihydroxy acetophenone

The polymeric metal complexes of poly (3‐hydroxy‐4‐((Z)‐1‐(phenylimino)ethyl)phenyl‐3‐methylbut‐2‐enoate) designated as [poly(3H4‐1PEPMB)] and poly (3‐hydroxy‐4‐((Z)‐phenyl(phenylimino)methyl)phenyl‐3‐methylbut‐2‐enoate designated as [poly(3H4‐PPMPMB)] containing Cu(II), Ni(II), Co(II), Cd(II), Mn(II), Ca(II), and Zn(II) ions were synthesized. The ploymer ligands and metal complexes were charcterized by Fourier transform infrared, nuclear magnetic resonance (NMR), thermogravimetric analysis, differential scanning calorimeter (DSC), and X‐ray diffraction (XRD) techniques. The XRD study of the complexes revealed highly crystalline nature of polychelates. The polymeric complexes were active for the oxidation of aldehyde group. The oxidation activity of Cu (II) complex of poly (3H4‐1PEPMB) was studied for the oxidation of benzaldehyde and its derivaties to corresponding carboxylic acids. The oxidation products were confirmed by GC‐MS analysis. The oxidation of aldehydes was quantitative with 100% selectivity for benzioc acid. Thermal analysis of complexes indicated reasonably good thermal stability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate: Its metal complexes and antimicrobial activity studies

Poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate [poly(TCMMA)] is prepared in dimethyl sulfoxide using 2,2′‐azobisisobutyronitrile as an initiator at 60°C. Poly(TCMMA) is characterized by IR and ¹H‐NMR spectroscopic techniques. Cadmium(II), copper(II), and nickel(II) chelates of poly(TCMMA) were synthesized. An elemental analysis of the polychelates suggests a metal/ligand ratio of 1:2. The polychelates are further characterized by IR and magnetic susceptibility measurements. The thermal properties of the polymer and metal chelates are also discussed. The molecular weights of the poly(TCMMA) are determined by the gel permeation chromatography technique. The antimicrobial activities of the polymer and metal chelates are tested against Staphylococcus aureus COWAN I (bacteria), Escherichia coli ATCC 25922 (bacteria), Listeria monocytogenes SCOTTA (bacteria), Bacillus subtilis LMG (bacteria), Enterobacter aeroginosa CCM 2531 (bacteria), Klebsiela pneumania FMCS (bacteria), Candida albicans CCM 314 (Mayo yeast), and Saccharamyces cerevisiae UGA 102 (Mayo yeast). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3244–3251, 2003     

Synthesis of water‐insoluble functional copolymers containing amide,amine, and carboxylic acid groups and their metal‐ion‐uptake properties

The crosslinked poly[N‐(3‐dimethylamino)propylmethacrylamide] [P(NDAPA)] and poly[N‐(3‐dimethylamino)propylmethacrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] were synthesized by radical polymerization. The resins were completely insoluble in water. The metal‐ion‐uptake properties were studied by a batch equilibrium procedure for the following metal ions: silver(I), copper(II), cadmium(II), zinc(II), lead(II), mercury(II), chromium(III), and aluminum(III). The P(NDAPA‐co‐AA) resin showed a lower metal‐ion affinity than P(NDAPA), except for Hg(II), which was retained at 71% at pH 2. At pH 5, the resin showed a higher affinity for Pb(II) (80%) and Cu(II) (60%), but its affinity was very low for Zn(II) and Cr(III). The polymer ligand–metal‐ion equilibrium was achieved during the first 20 min. By changing the pH, we found it possible to remove between 60 and 70% of Cd(II) and Zn(II) ions with (1M, 4M) HClO₄ and (1M, 4M) HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5232–5239, 2006     

Preparation,characterization, and metal ion retention capacity of Co(II) and Ni(II) from poly(p‐HO‐ and p‐Cl‐phenylmaleimide‐co‐2‐hydroxypropylmethacrylate) using the ultra filtration technique

p‐Chlorophenylmaleimide and p‐hydroxyphenylmaleimide with 2‐hydroxypropyl methacrylate were synthesized by radical polymerization, and the metal ion retention capacity and thermal behavior of the copolymers were evaluated. The copolymers were obtained by solution radical polymerization with a 0.50 : 0.50 feed monomer ratio. The maximum retention capacity (MRC) for the removal of two metal ions, Co(II) and Ni(II) in aqueous phase were determined using the liquid‐phase polymer based retention technique. Inorganic ion interactions with the hydrophilic polymer were determined as a function of pH. The metal ion retention capacity does not depend strongly on the pH. Metal ion retention increased with an increase of pH for a copolymer composition 0.50 : 0.50. At different pH, the MRC of the poly(p‐chlorophenylmaleimide‐co‐2‐hydroxypropylmethacrylate) for Co(II) and Ni(II) ions varied from 44.1 to 48.6 mg/g and from 41.5 mg/g to 46.0 mg/g, respectively; while the MRC of poly(p‐hydroxyphenylmaleimide‐co‐2‐hydroxypropyl methacrylate) for Co(II) and Ni(II) ions varied from 28.4 to 35.6 mg/g and from 27.2 to 30.8 mg/g, respectively. The copolymers and copolymer–metal complexes were characterized by elemental analysis, FT‐IR, ¹H NMR spectroscopy, and thermal behavior. The thermal behavior of the copolymer and polymer–metal complexes were studied using differential scanning calorimetry and thermogravimetry techniques under nitrogen atmosphere. The thermal decomposition temperature and T_g were influenced by the binding‐metal ion on the copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of poly(4‐vinylpyrrolidone)‐g‐poly(N‐hydroxyacrylamide) and study of its metal binding properties

Crosslinked poly(N‐vinylpyrrolidone), preirradiated in air with γ rays, was grafted with ethyl acrylate in dioxane and water. A detailed study of grafting was made under various reaction conditions. The graft copolymer was treated with potassium hydroxamate in ethanol. The resulting polymer contained pendant hydroxamic acid groups ( CO NHOH) and was studied for the formation of complexes with Fe(III), Cu(II), and Ni(II). The effect of pH on the metal ion uptake by the polymer was also studied. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 475–483, 2000     

α‐cyclodextrin assisted self‐assembly of poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide) in aqueous media

Poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide) (PEG‐b‐PNIPAM) block copolymers were synthesized by atom transfer radical polymerization, and the α‐cyclodextrin (α‐CD) induced self‐assembly characteristics of the system were elucidated. Below the lower critical solution temperature (LCST) of PNIPAM, CD threaded onto the PEG segments and induced micellization to form rod‐shaped nanostructures comprising of a PEG/α‐CD condensed phase and a PNIPAM shell. Increasing the temperature of system above the LCST caused the PNIPAM segments to collapse, which resulted in the dethreading of the CD. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Highly photoemissive polymer–transition metal complexes based on poly(2‐hydroxyethyl) methacrylate

The paper presents several new polymer complexes based on poly(2‐hydroxyethyl) methacrylate (P‐HEMA) and transition metals including Y³⁺, Eu³⁺, Tb³⁺ and Dy³⁺. Red‐, green‐, blue‐ and yellow‐emitting polymer complexes with remarkable photoluminescent (PL) properties, high degree of transparency and excellent processability both in bulk and in thin film were prepared and investigated. In the case of the prepared P‐HEMA–Eu³⁺ and P‐HEMA–Tb³⁺ polymer complexes, divinylbenzene was used as a crosslinker resulting a markedly enhanced PL emission, most probably due to the presence of the benzene rings which improve the efficiency of the energy transfer to the cation emissive centres. The prepared polymer complexes were structurally investigated through Fourier transform infrared and X‐ray photoelectron spectroscopies while atomic force microscopy was used to study the morphology of the prepared thin films. Steady‐state fluorescence spectroscopy and absolute PL quantum yield were used for the investigation of the luminescent properties. The impressive PL emission and the convenience of preparation in bulk or thin films could be important arguments for a wide area of applications ranging from photonic conversion materials in optoelectronic devices (light‐emitting diodes, flat‐panel displays) to full‐colour watermarks on special‐purpose papers or PL inks and coatings. © 2019 Society of Chemical Industry     

Metal ion adsorption behavior of poly[3‐(dimethylamine)propyl acrylate] and poly[3‐(dimethylamine)propylacrylate‐co‐acrylic acid] resins

Two resins were synthesized by radical polymerization using N,N′‐methylene‐bis‐acrylamide and ammonium persulfate as the crosslinking reagent and initiator, respectively. The yields were 98%. The resins were characterized by FTIR and UV‐Vis spectroscopy. Sorption behavior of resins toward Hg(II), Cd(II), Zn(II), Pb(II), and Cr(III) ions was studied at different pHs depending on the metal ion. Both resins showed selective sorption to Hg(II) ions at pH 2 from a mixture of all ions.The elution of Hg(II) bound to the resins was also investigated using perchloric acid at different concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1251–1256, 2002; DOI 10.1002/app.10455     

Synthesis of well‐defined comblike hydroxy‐functionalized atactic polystyrene promoted by metallocene/tin/poly(phenyl glycidyl ether)‐co‐formaldehyde

Well‐defined comblike atactic polystyrene functionalized with hydroxyl groups was synthesized via living/controlling radical polymerization promoted by metallocene complexes in the presence of poly(phenyl glycidyl ether)‐co‐formaldehyde as the initiator and Sn as a reducing agent. The effect of the polymerization conditions, such as the ratio of initiator to monomer, temperature, and polymerization time, and the structure of the metallocene complex on the polymerization process were investigated. The resulting polymers were characterized by gel permeation chromatography, multiangle laser light scattering, ¹H‐NMR, and ¹³C‐NMR. The results show that the polymer had a narrow molecular weight distribution in the range 1.1–1.4 and the number‐average molecular weight of the polymer linearly depended on the monomer conversion within the polymerization timescale, which confirmed that living radical polymerization characteristics prevailed in the polymerization process. Both the number of arms and the number of hydroxyl groups in each polymer molecule were about four, which suggested that they arose from the epoxy functional groups of the initiator. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010