OMMT与MPP协效阻燃对硅橡胶性能影响

以三聚氰胺磷酸盐（MPP）、有机蒙脱土（OMMT）为协效阻燃剂制备阻燃硅橡胶。通过x射线衍射（XRD）法、垂直燃烧法、热重法（TG）等研究阻燃硅橡胶分散性、燃烧性能和拉伸性能。结果表明,OMMT与MPP具有明显协同阻燃性;当OMMT用量为3质量份、MPP用量为55质量份时,复合材料有焰燃烧时间最短,阻燃效果最好;OMMT用量为3-5质量份时,复合体系的垂直燃烧性能均可达到FV-0级,残碳率最高,且力学性能较好。     

Preparation and investigation of ethylene–vinyl acetate copolymer/silicone rubber/clay nanocomposites

In this article, the combination of silicone rubber (SR) elastomer with synthetic iron montmorillonite (Fe‐MMT) to form a kind of new flame‐retardant system based on an ethylene–vinyl acetate (EVA) copolymer is first reported. Also, the flame retardancy of the EVA/SR/Fe‐MMT hybrid are compared with that of EVA/SR/natural sodium montmorillonite. The structures of the nanocomposites were characterized with X‐ray diffraction and transmission electron microscopy. Cone calorimeter tests and thermogravimetric analysis were used to evaluate the flame‐retardant properties and thermal stability of the composites, respectively. In addition, tensile tests were carried out with a universal testing machine, and the morphology of the fracture surface was observed with environmental scanning electron microscopy. We found that SR/organophilic montmorillonite (Fe‐OMT) was more effective in reducing the primary peak heat release rate of the nanocomposite, and the EVA/SR/Fe‐OMT hybrid had a higher thermal stability in the deacetylated polymer than EVA/SR/sodium organophilic montmorillonite. Moreover, the exfoliated EVA/SR/Fe‐OMT nanocomposite displayed excellent mechanical properties because of a better dispersion of Fe‐OMT in the polymer matrix, and a possible mechanism is discussed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Improving Thermal Stability and Electrical Insulation of Gamma‐Irradiated Silicone Rubber Nanocomposites

Room temperature vulcanized silicone rubber (RTVSR) nanocomposites were prepared by mixing of surface‐modified montmorillonite nanoclay or nano fumed silica, or both of them with RTVSR to improve thermal stability, electrical insulation, and flame retardant. Their tensile strength, elongation, swelling, and solubility properties at different doses of gamma radiation were investigated to study the effect of gamma radiation on the properties of the nanocomposites. The thermal stability, flammability properties, and volume resistivity of the nanocomposites were also investigated. The nanocomposite which containing fumed silica has the best thermal, mechanical properties, electrical insulation and fire retardancy. The thermal characteristics, namely, T_onset, T_10%, T_comp, and T_max, of the nanocomposite sample containing fumed silica were 22, 23, 13, and 11 °C higher than those of the blank, respectively. The tensile strength (TS) increased when the radiation dose was increased up to 100 kGy, but elongation, swelling, and solubility decreased when the radiation dose was increased up to 150 kGy. It can be generally concluded that the nanocomposites containing fumed silica and irradiated to 100 kGy are characterized by having outstanding mechanical, thermal, fire retardant, and electrical insulation properties and hence, they may have wide industrial applications as good thermal and electrical insulating materials. J. VINYL ADDIT. TECHNOL., 26:354–361, 2020. © 2019 Society of Plastics Engineers     

Effects of silicon additive as synergists of Mg(OH)2 on the flammability of ethylene vinyl acetate copolymer

The present work dealt with the effects of nine kinds of silicon additives on flame retardancy of ethylene‐vinyl acetate copolymer (EVA)/magnesium hydroxide [Mg(OH)₂] composites, as well as mechanical properties. The limiting oxygen index (LOI) test, horizontal fire test, vertical fire test, and cone calorimeter test were employed to evaluate flame retardancy of the composites. It was found that different silicon additives had different synergistic effects with Mg(OH)₂ on flame retardancy of the EVA matrix and exerted different influences on mechanical properties of the composites. The incorporation of organic montmorillonite (MMT) clay or silicone rubber not only made the composite reach FH‐1 rating in the horizontal fire test and FV‐1 rating in the vertical fire test, respectively, but also dramatically reduced the peak rate of heat release (Peak RHR) and increased the fire performance index (FPI) and ignition time (IT). The composites filled with precipitated SiO₂ exhibited the longest IT, the highest FPI, and FV‐1 rating. However, only the composites filled with silicone rubber could attain a balance between mechanical properties and flame retardancy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Condensed‐phase flame retardation in nylon 6‐layered silicate nanocomposites: Films,fibers, and fabrics

Flame‐retardant properties of nylon 6/organically modified montmorillonite (OMMT) thin films, fibers, and fabrics were investigated to determine the efficacy of condensed‐phase flame‐retardant mechanism in relation to montmorillonite concentration, sample geometry, and flame test conditions. Horizontal flame spread conducted on thin films revealed no significant difference in burning behavior between nylon 6 and nanocomposites with 5 wt% OMMT. However, with a higher concentration level of 8–10 wt% OMMT, the films burned without any dripping. The flame spread rate was reduced by 30–40% as compared with nylon 6 films. Cone calorimeter study on nanocomposite films showed that the peak heat release rate of nylon 6 was reduced by 65–67% with 8–10 wt% OMMT. Undrawn nanocomposite monofilaments with 10 wt% OMMT burned slowly and steadily in Bunsen flame without dripping. In cone calorimeter, nanocomposite fabrics with 8 wt% OMMT showed reduced heat release rate and mass loss rate compared to nylon 6 fabrics with increase in fabric tightness factor. The mass loss rate was about 40–60% less when compared with nylon 6 fabrics. The fabric char structure remained intact after burning. This demonstrated the interdependence of fabric tightness factor, OMMT concentration, and source of heat flux in forming a protective char and affecting the flammability of fabrics. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Flame‐retardant materials: synergistic effect of halloysite nanotubes on the flammability properties of acrylonitrile–butadiene–styrene composites

Novel well‐dispersed nanocomposites of halloysite nanotubes and acrylonitrile–butadiene–styrene were prepared. The fire retardancy and thermal stability of these new nanocomposites were improved. A synergistic effect was observed between the halloysite nanotubes and an intumescent flame‐retardant system consisting of ammonium polyphosphate, melamine polyphosphate and pentaerythritol in the acrylonitrile–butadiene–styrene composites. The incorporation of the intumescent flame‐retardant material into the halloysite–polymer nanocomposite system also improved the thermal stability and reduced the peak heat release rate by up to 56.2%, and it significantly reduced the emission of CO and CO₂ gases. The morphology and dispersion of the halloysite nanotubes were characterized using scanning and transmission electron microscopy. The thermal stability and flammability properties were investigated using thermogravimetric analysis and cone calorimeter tests. © 2013 Society of Chemical Industry     

Thermal stability,aging properties,and flame resistance of NR‐based nanocomposite

Polymer/clay nanocomposites have some unique properties due to combination of flame resistance and improved mechanical and thermal stability properties which are important to enhance the material quality and performance. The objective of this work was to investigate the effect of organically modified montmorillonite (org‐MMT) on the thermal and flame retardant as well as hardness and mechanical properties of the nanocomposites based on the natural rubber (NR). It was shown that by the addition of 3 wt % of org‐MMT to NR, its aging hardness rise was decreased more than 55% and the ignition time was delayed about 150%. The reduction in heat release rate peak value was equal to 54% compared to the pristine NR. Addition of org‐MMT improved the thermal stability of the NR. Furthermore, nanocomposites which were calendared before curing showed much more thermal stability and fire resistance than those which contained similar amount of organoclay. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Flame‐retarding mechanism of organically modified montmorillonite and phosphorous‐Nitrogen flame retardants for the preparation of a halogen‐free,flame‐retarding thermoplastic poly(ester ether) elastomer

In this study, thermoplastic poly(ester ether) elastomer (TPEE) nanocomposites with phosphorus–nitrogen (P–N) flame retardants and montmorillonite (MMT) were prepared by melt blending. The fire resistance of the nanocomposites was analyzed by limiting oxygen index (LOI) and vertical burning (UL 94) tests. The results show that the addition of the P–N flame retardants increased the LOI of the material from 17.3 to 27%. However, TPEE containing P–N flame retardants only obtained a UL 94 V‐2 ranking; this resulted in a flame dripping phenomenon. On the other hand, TPEE containing the P–N flame retardant and organically modified montmorillonite (o‐MMT) achieved better thermal stability and good flame retardancy; this was ascribed to its partially intercalated structure. The synergistic effect and synergism were investigated by Fourier transform infrared spectroscopy and thermogravimetry. The introduction of o‐MMT decreased the inhibition action of the P–N flame retardant and increased the amount of residues. The catalytic decomposition effect of MMT and the barrier effect of the layer silicates are discussed in this article. The residues after heating in the muffle furnace were analyzed by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and laser Raman spectroscopy. It was shown that the intercalated layer silicate structure facilitated the crosslinking interaction and promoted the formation of additional carbonaceous char residues in the formation of the compact, dense, folded‐structure surface char. The combination of the P–N flame retardant and o‐MMT in TPEE resulted in a better thermal stability and fire resistance because of the synergistic effect of the mixture. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41094.     

阻燃环氧树脂/有机蒙脱土纳米复合材料制备及阻燃性能

研究制备了环氧树脂(EP)/有机蒙脱土(OMMT)、N,N-二(2-羟乙基)氨甲基膦酸二乙酯(BHAPE)阻燃剂阻燃的EP和EP/OMMT等复合材料。XRD证明分散在复合材料中的OMMT为剥离型的,且BHAPE的加入不影响材料中OMMT剥离后的层间距。研究证明,单独使用BHAPE很难使EP通过UL 94 V-0阻燃级,仅添加OMMT的EP固化物,其氧指数和UL94阻燃性能几乎与纯EP固化物的一样。但是同时添加BHAPE和OMMT的EP固化物,当BHAPE和OMMT的添加量分别为25%和5%时,不仅BHAPE/EP/OMMT复合物的CONE阻燃参数都明显降低,而且能通过UL94V-0级。可能是BHAPE和OMMT在凝聚相同时发挥作用,即BHAPE和OMMT协同阻燃作用提高了复合材料的综合阻燃性能。     

EPDM/silicone blend layered silicate nanocomposite by solution intercalation method: Morphology and properties

Ethylene–propylene–diene terpolymer (EPDM)/silicone blend nanocomposites are prepared by solution method for the first time. EPDM and silicone rubber in their 50:50 (by weight) blend is intercalated within the silicate sheets of organically modified montmorillonite. Organic modification to the pristine sodium montmorillonite (Na‐MMT) surfaces is carried out by ion‐exchange reaction using hexadecyl ammonium chloride. The incorporation of such organic functional group makes Na‐MMT hydrophobic and expands the interlayer spacing between silicate sheets. The intercalated structure of EPDM/silicone blend nanocomposites is characterized by the X‐ray diffraction. Transmission electron microscopic characterization visualized the presence of both exfoliated and intercalated layered silicate in the polymer nanocomposites. The mechanical properties of the nanocomposites show a maximum improvement in tensile strength and elongation at break of 23 and 68%, respectively, compared with EPDM/silicone blend. The dielectric measurement demonstrates the increase in relative permittivity for the nanocomposite than the pure blend. The increase in the onset temperature of the thermal degradation of nanocomposites (∼52°C) corresponding to 1 wt% decomposition indicates the enhancement of thermal stability of (EPDM)/silicone blend due to interaction with silicates. POLYM. COMPOS., 35:1834–1841, 2014. © 2014 Society of Plastics Engineers     

Synergistic Effect of Montmorillonite and Intumescent Flame Retardant on Flame Retardance Enhancement of ABS

The synergistic effects of organic montmorillonite (OMMT) and intumescent flame retardant (IFR) based on the ammonium polyphosphate (APP) and pentaerythritol (PER) on flame retardant enhancement of acrylonitrile-butadiene-styrene copolymer (ABS) were investigated by using the limiting oxygen index (LOI), the UL-94 (vertical flame) test, thermogravimetric analysis (TGA), x-ray diffractometry (XRD) and scanning electron microscopy (SEM). The LOI data and vertical flame tests show that OMMT has a synergistic flame retardant effect with IFR and the LOI value of ABS/OMMT/IFR (96/4/20) reaches 28.7%. The TGA data demonstrate that the incorporation of OMMT and IFR is very effective in enhancing the thermal stability of ABS/OMMT/IFR system at high temperature (T > 500°C). The results of XRD show that the composite of ABS/OMMT is a kind of intercalated nanocomposite and the gallery height of ABS/OMMT nanocomposite is 3.5 nm. The microstructures observed by SEM demonstrate that a suitable amount of OMMT with IFR can promote formation of compact intumescent charred layers in ABS blends.     

Preparation,structure and properties of nitrile–butadiene rubber–organoclay nanocomposites by reactive mixing intercalation method

The nanocomposites of nitrile–butadiene rubber (NBR) and organo‐montmorillonite modified by hexadecyltrimethyl ammonium bromide (HMMT) were prepared by the reactive mixing intercalation method in the presence of the resorcinol and hexamethylenetetramine complex (RH). The structure of the NBR–RH–HMMT nanocomposites was characterized by XRD, TEM, FTIR, determination of crosslinking density, and so on. The results showed that the d‐spacing of HMMT increased substantially with RH addition and the layers of HMMT were dispersed in rubber matrix on a nanometer scale. The mechanical properties of the NBR–RH–HMMT nanocomposites were far superior to those of NBR–HMMT composites, and the glass transition temperature of NBR–RH–HMMT nanocomposite was higher than that of NBR. The reactive mixing intercalation method by introducing RH could enhance the interface combination between the rubber and the organoclay through the interactions of RH with NBR and modified clay. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1905–1913, 2006     

Novel biodegradable flame retardant,poly(butyl methacrylate)/sodium silicate/Mg(OH)2 nanocomposite

Flame retardant poly(butyl methacrylate)/sodium silicate/Mg(OH)₂ (MH) nanocomposite has been prepared via in situ emulsion polymerization of BMA, benzoyl peroxide, layered silicate, and conventional fire retardant additive, MH. The morphology, thermal stability, and flammability properties of the nanocomposite were characterized by IR, XRD, TEM, TGA, cone calorimetry, and limiting oxygen index. The thermal stability and the flame retardant properties of the polymer‐silicate‐MH showed significant improvements in the decomposition temperature and the lower heat release rates due to the formation of nanocomposites with layered silicates. Biodegradation testing by Bacillus cereus (gram‐positive) revealed the ecofriendly nature of the nanocomposite. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers     

Flame retardancy and mechanical properties of polyamide 6 with melamine polyphosphate and ionic liquid surfactant‐treated montmorillonite

The mechanical properties and inflammability of polyamide 6 (PA6) nanocomposites incorporated with Montmorillonite organoclay (MMT) modified with thermal stable ionic liquid surfactants were investigated. The compatibility between ionic liquid‐treated MMT and PA6 matrix was improved and the intercalation morphology was achieved, which resulted in the increaseof tensile modulus. However, the addition of organo‐MMTs alone did not improve the inflammability of the PA6 nanocomposite, because of strong melt‐dripping behavior of PA6 matrix. Addition of auxiliary melamine polyphosphate (MPP) intumescent flame retardant to the nanocomposite prevented the melt dripping and enhanced inflammability performance. The enhanced inflammability of PA6/organoclay/MPP nanocomposites was attributed to the synergistic effect between imidazolium or phosphonium organo‐MMTs and intumescent flame retardant MPP. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40648.     

A polymeric flame retardant and surfactant‐free montmorillonite nanocomposites: Preparation and exfoliation mechanism discussion

A polymeric flame retardant (PDEPD) and various amounts of sodium montmorillonite (Na‐MMT) nanocomposites with exfoliation structure were prepared via one‐step polycondensation, attempting to prepare flame‐retardant nanocomposites. The nanocomposites exhibited high thermal stability at high temperature. Based on several comparative studies, we investigated and proposed the possible exfoliation mechanism of Na‐MMT in PDEPD substrate. The microscale combustion calorimeter and cone calorimeter results showed the PDEPD/Na‐MMT nanocomposites could significantly improve the flame retardancy of polystyrene and polyurethane elastomer (TPU), especially the TPU matrix. This study provides new viewpoint for preparing flame‐retardant nanocomposites without surfactants. POLYM. COMPOS., 35:167–173, 2014. © 2013 Society of Plastics Engineers     

MP/OMMT对脱醇型RTV阻燃硅橡胶性能的影响

以α,ω-二羟基聚二甲基硅氧烷(107硅橡胶)、甲基三乙氧基硅烷、三聚氰胺磷酸盐(MP)和纳米有机蒙脱土(OMMT)为原料,制备了脱醇型室温硫化(RTV)阻燃硅橡胶。研究了MP/OMMT配比对脱醇型RTV硅橡胶阻燃性能、动态燃烧性能和机械性能、热稳定性的影响,用扫描电镜(SEM)考察了MP、OMMT在RTV硅橡胶中的分散情况。锥形量热仪和极限氧指数测试结果表明,随着OMMT用量的增多和MP用量的减少,硅橡胶的阻燃性能没有显著的变化;热失重分析表明,OMMT的添加使硅橡胶的初始分解温度明显提高,大大提高了硅橡胶燃烧残渣的生成量;机械性能测试表明,OMMT的增多能明显提高硅橡胶的机械性能。与只添加MP的硅橡胶相比,当MP和OMMT各添加20份时,硅橡胶的极限氧指数下降0.6%,初始分解温度提高了95℃,拉伸强度、硬度、撕裂强度分别提高48.6%、4.7%、50.9%;此时的SEM分析表明,OMMT能在硅橡胶中均匀分散,且燃烧残渣表面变得平整、坚硬、致密。即在此配比下硅橡胶能在保持良好阻燃性的同时提高其机械性能。     

微胶囊红磷对电气绝缘用硅橡胶的阻燃改性研究

研究改性氢氧化铝(m-ATH)/微胶囊红磷无卤复合阻燃剂对电气绝缘用甲基乙烯基硅橡胶物理性能、电性能和阻燃性能等的影响,并与m-ATH/十溴二苯乙烷复合阻燃剂进行对比。结果表明,m-ATH/微胶囊红磷无卤复合阻燃剂对甲基乙烯基硅橡胶具有良好的阻燃协效作用。     

Mechanical properties,flame retardancy,and smoke suppression of lanthanum organic montmorillonite/poly(vinyl chloride) nanocomposites

A dimethyl dioctadecyl ammonium chloride modified organic montmorillonite (OMMT_‐I.44P)/poly(vinyl chloride) (PVC) nanocomposite and anionic‐surfactant‐modified lanthanum organic montmorillonite (La‐OMMT)/PVC nanocomposites (with three different anionic surfactants for the La‐OMMTs) were prepared via melt‐intercalation technology. The effects of the La‐OMMTs and OMMT_‐I.44P on the mechanical properties, flame retardancy, and smoke suppression of PVC were studied. X‐ray diffraction characterization showed that the La‐OMMTs were exfoliated in the PVC matrix. The mechanical properties of the nanocomposites were enhanced by the incorporation of the La‐OMMTs. Cone calorimetry and gas chromatography–mass spectrometry analyses indicated that the incorporation of the La‐OMMTs enhanced the flame retardancy and smoke suppression of the PVC nanocomposites. Scanning electron microscopy photos further showed that the residual char surfaces of La‐OMMT/PVC were all intact and, thus, provided better barriers to energy and smoke transport. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43951.     

Montmorillonite clay nanocomposites based on vinyl pyridine‐styrene‐butadiene terpolymer (VPR)/acrylonitrile‐butadiene rubber (NBR) blend

This study describes a novel route to synthesize vinyl pyridine‐styrene‐butadiene terpolymer rubber (VP rubber) montmorillonite clay nanocomposites by latex blending technique. The pyridine moiety of the VP rubber was modified with methyl iodide to form the pyridinium ion during latex blending. Cation exchange reaction of the pyridinium ion of the VP rubber latex with sodium montmorillonite occurred during latex stage mixing which helped to form VP rubber‐montmorillonite clay nanocomposites. Coagulation of the latex‐clay slurry produced nanocomposites master batch. The master batch was compounded with acrylonitrile butadiene rubber (NBR). Fourier Transform Infrared Spectroscopy (FTIR) confirmed the modification of the pyridine moiety of VP rubber. Wide angle X‐ray diffraction (WAXD), scanning electron microscopy‐energy dispersive X‐ray spectrophotometry (SEM‐EDS) and transmission electron microscopy (TEM) provided the evidences of formation of nanocomposite. Remarkable improvements in the mechanical properties were found by addition of small amount of modified clay. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Flame retardancy of nanocomposites

Nishizawa Technical Institute (NTI) and Kyoto Institute of Technology (KIT) have developed EVA‐clay nanocomposites with excellent mechanical and flame retardant properties by a reactive process and have succeeded in a novel method to synthesize an aluminium hydroxide nanoparticle, which has the effect of improving the flame retardancy of nanocomposites with EVA. About the EVA‐clay nanocomposites, the peak heat release rate (HRR) of sample MM2 (EVA‐clay partially processed nanocomposites) and sample MM3 (EVA‐clay completely processed nanocomposites) was reduced from 1/3 (one third) to 1/4 (one fourth) compared with EVA only. Sample AL‐1 (EVA‐aluminium nanocomposites) showed a more effective reduction of HRR than sample AL‐2 (EVA‐normal aluminium hydroxide). Beside these experiments, the orientation of the nanofiller MMT (montmorillonite) by a 2‐axis extruder equipped a special novel kneading roll head and the flame retardancy of silica nanocomposite coating materials (Sol‐Gel process) is discussed. Copyright © 2004 John Wiley & Sons, Ltd.