Reversible addition–fragmentation chain transfer polymerization of styrene with benzoimidazole dithiocarbamate as a reversible addition–fragmentation chain transfer agent

Two novel dithiocarbamates [2‐Y‐benzoimidazole‐1‐carbodithioic acid benzyl esters: Y = methyl (1b) or phenyl (1c)] were synthesized and successfully used in the reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene in bulk with thermal initiation. The effects of the temperatures and concentration ratios of the styrene and RAFT agents on the polymerization were investigated. The results showed that the polymerization of styrene could be well controlled in the presence of 1b or 1c. The linear relationships between ln([M]₀/[M]) and the polymerization time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) indicated that the polymerizations were first‐order reactions with respect to the monomer concentration. The molecular weights increased linearly with the monomer conversion and were close to the theoretical values. The molecular weight distributions [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] were very narrow from 5.3% conversion up to 94% conversion (M_w/M_n < 1.3). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 560–564, 2006     

Atom transfer radical polymerization of styrene with 2‐(1‐bromoethyl)‐anthraquinone as an initiator

2‐(1‐Bromoethyl)‐anthraquinone (BEAQ) was successfully used as an initiator in the atom transfer radical polymerization of styrene with CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as the catalyst at 110°C. The polymerizations were well controlled with a linear increase in the molecular weights (M_n's) of the polymers with monomer conversion and relatively low polydispersities (1.1 < weight‐average molecular weight (M_w)/M_n < 1.5) throughout the poly merizations. The resultant polystyrene thus possessed one chromophore moiety (2‐ethyl‐anthraquinone) at the α end and one bromine atom at the ω end, both from the initiator BEAQ. The intensity of UV absorptions of the resultant polymers decreased with increasing molecular weights of the polymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2081–2085, 2006     

α‐Bis and α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polymers by atom transfer radical polymerization using 1,1‐bis[(4‐dimethylamino)phenyl]ethylene as tertiary diamine initiator precursor and functionalizing agent

The quantitative syntheses of α‐bis and α,ω‐tetrakis tertiary diamine functionalized polymers by atom transfer radical polymerization (ATRP) methods are described. A tertiary diamine functionalized 1,1‐diphenylethylene derivative, 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1), was evaluated as a unimolecular tertiary diamine functionalized initiator precursor as well as a functionalizing agent in ATRP reactions. The ATRP of styrene, initiated by a new tertiary diamine functionalized initiator adduct (2), affords the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3). The tertiary diamine functionalized initiator adduct (2) was prepared in situ by the reaction of (1‐bromoethyl)benzene with 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) in the presence of a copper (I) bromide/2,2′‐bipyridyl catalyst system. The ATRP of styrene proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene derivative (3) with predictable number‐average molecular weight (M_n) and narrow molecular weight distribution (M_w/M_n) in a high initiator efficiency reaction. The polymerization process was monitored by gas chromatography analysis. Quantitative yields of α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polystyrene (4) were obtained by a new post ATRP chain end modification reaction of α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3) with excess 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1). The tertiary diamine functionalized initiator precursor 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) and the different tertiary amine functionalized polymers were characterized by chromatography, spectroscopy and non‐aqueous titration measurements. Copyright © 2012 Society of Chemical Industry     

Atom transfer radical polymerization grafting of highly functionalized polystyrene and poly(4‐methylstyrene) macroinitiators with tert‐butyl acrylate

Two monodisperse graft copolymers, poly(4‐methylstyrene)‐graft‐poly(tert‐butyl acrylate) [number‐average molecular weight (M_n) = 37,500, weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.12] and polystyrene‐graft‐poly(tert‐butyl acrylate) (M_n = 72,800, M_w/M_n = 1.12), were prepared by the atom transfer radical polymerization of tert‐butyl acrylate catalyzed with Cu(I) halides. As macroinitiators, poly{(4‐methylstyrene)‐co‐[(4‐bromomethyl)styrene]} and poly{styrene‐co‐[4‐(1‐(2‐bromopropionyloxy)ethyl)styrene]}, carrying 40% of the bromoalkyl functionalities along the chain, were used. The dependencies of molecular parameters on monomer conversion fulfilled the criteria for controlled polymerizations. In contrast, the dependencies of monomer conversion versus time were nonideal; possible causes were examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2930–2936, 2002     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

RAFT‐mediated emulsion polymerization of chloroprene and impact of chain‐end structure on chloroprene rubbers

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of chloroprene (CP) in an emulsion system using a dithiocarbamate‐type RAFT agent was studied. The controlled RAFT‐mediated emulsion polymerization was achieved by the appropriate combination of a RAFT agent and nonionic surfactant (polyoxyethylene phenyl ether) using a water‐soluble initiator (VA‐044) at 35 °C. An almost linear first‐order kinetic plot was observed until relatively high conversion (>80%) with molecular weights between 22,300 and 33,100 and relatively narrow molecular weight distributions (M_w/M_n ≦ 1.5) were achieved. The amount of the emulsifier used and the pH of the system were found to affect the controlled character, polymerization rate, and induction period, which are related to the size of the emulsion particles. Large‐scale RAFT‐mediated emulsion polymerization was also employed to afford industrially applicable poly(CP) (M_w > 25 × 10⁴, resulting product > 2300 g). The vulcanized CP rubber obtained from the RAFT‐synthesized poly(CP) exhibited better physical properties, particularly tensile modulus and compression set, which may be due to the presence of the reactive end groups and the absence of low‐molecular‐weight products. We also evaluated the impact of the chain‐end structure on the mechanical and physical properties of these industrially important CP rubbers with carbon black. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46008.     

RAFT synthesis of poly(N‐isopropylacrylamide) and poly(methacrylic acid) homopolymers and block copolymers: Kinetics and characterization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used successfully to synthesize temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm), poly(methacrylic acid) (PMAA), and their temperature‐responsive block copolymers. Detailed RAFT polymerization kinetics of the homopolymers was studied. PNIPAAm and PMAA homopolymerization showed living characteristics that include a linear relationship between M _n and conversion, controlled molecular weights, and relatively narrow molecular weight distribution (PDI < 1.3). Furthermore, the homopolymers can be reactivated to produce block copolymers. The RAFT agent, carboxymethyl dithiobenzoate (CMDB), proved to control molecular weight and PDI. As the RAFT agent concentration increases, molecular weight and PDI decreased. However, CMDB showed evidence of having a relatively low chain transfer constant as well as degradation during polymerization. Solution of the block copolymers in phosphate buffered saline displayed temperature reversible characteristics at a lower critical solution temperature (LCST) transition of 31°C. A 5 wt % solution of the block copolymers form thermoreversible gels by a self‐assembly mechanism above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1191–1201, 2006     

Preparation of poly(tert‐butyl acrylate)‐poly(acrylic acid) amphiphilic copolymers via radiation‐induced reversible addition–fragmentation chain transfer mediated polymerization of tert‐butyl acrylate

Poly(tert‐butyl acrylate) (PtBA) is a versatile hydrophobic macromolecule usually preferred in the development of new materials for a host of applications. PtBA homopolymers with well‐defined structure and controlled molecular weight in a wide range were successfully synthesized via radiation‐induced reversible addition–fragmentation chain transfer (RAFT) polymerization in the presence of a trithiocarbonate type RAFT agent. The polymerization of tBA was performed under ⁶⁰Co γ‐irradiation in the presence of 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid (DDMAT) as the RAFT agent in toluene at room temperature with three [tBA]/[DDMAT] ratios (400, 600 and 1000) and different irradiation times. Radiation‐induced polymerization of tBA displayed controlled free radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n ~ 1.1), pseudo first order kinetics and controlled molecular weights. The system followed the RAFT polymerization mechanism even at very low amounts of RAFT agent ([tBA]/[DDMAT] = 1000), and molecular weights up to 113 900 with narrow dispersity (Ð =1.06) were obtained. PtBA was further hydrolysed into different amphiphilic PtBA‐co‐poly(acrylic acid) (PAA) copolymers by low (27.5%) and high (77.3%) degrees of hydrolysis. The pH sensitivity of the two copolymers was investigated by dynamic light scattering at pH 2 and pH 9 (above and below the pK_a value of PAA) and their hydrodynamic diameters and zeta potential values were determined. © 2020 Society of Chemical Industry     

Preparation of silane‐terminated polystyrene and polymethylmethacrylate self‐assembled films on silicon wafer

End silane functionalized polystyrene and polymethylmethacrylate were prepared through radical chain‐transfer reaction and characterized with gel‐permeation chromatography. The chain‐transfer constants of mercaptopropyltrimethoxysilane for the polymerization of styrene and methylmethacrylate were determined to be 8.48 and 0.67, respectively, from the slopes of 1/DP_n versus [S]/[M] lines. The ultrathin films of the end silane–terminated polymers were prepared by self‐assembly onto hydroxylated silicon wafers. The water contact angle on the resulting ultrathin films and the film thickness were measured. The morphology and chemical features of the films were observed and investigated by means of atomic force microscopy and X‐ray photoelectron spectroscopy. Results indicated that the chain‐transfer agent played a key role in making it possible for the silane‐terminated polystyrene and polymethylmethacrylate to be self‐assembled on Si(111), whereas the thickness and surface quality of the ultrathin films were dependent on the molecular weights of the polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1695–1701, 2004     

Preparation of well‐defined block copolymer having one polystyrene segment and another poly(styrene‐alt‐maleic anhydride) segment with RAFT polymerization

Block copolymers, polystyrene‐b‐poly(styrene‐co‐maleic anhydride), have been prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization technique using three different approaches: 1‐phenylethyl phenyldithioacetate (PEPDTA) directly as RAFT agent, mediated polystyrene (PS) block as the macromolecular PS‐RAFT agent and mediated poly(styrene‐maleic anhydride) (SMA) block with alternating sequence as the macromolecular SMA‐RAFT agent. Copolymers synthesized in the one‐step method using PEPDTA as RAFT agent possess one PS block and one SMA block with gradient structure. When the macromolecular RAFT agents are employed, copolymers with one PS block and one alternating SMA block can be produced. However, block copolymers with narrow molecular weight distribution (MWD) can only be obtained using the PS‐RAFT agent. The MWD deviates considerably from the typical RAFT polymerization system when the SMA is used as the RAFT agent. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

PMMA composites of single‐walled carbon nanotubes‐graft‐PMMA

To facilitate the dispersion of single‐walled carbon nanotubes (SWCNT) into poly(methyl methacrylate) (PMMA), SWCNT were functionalized with a RAFT chain transfer agent, and PMMA was grafted from the SWCNT by reversible addition–fragmentation transfer (RAFT) polymerization to give SWCNT‐g‐PMMA containing 6 wt % PMMA. SWCNT‐g‐PMMA in the form of small bundles was dispersed into PMMA matrices. The SWCNT‐g‐PMMA filler increased the glass transition temperature (T_g) of the composite when the matrix molecular weight M_n was less than the graft molecular weight, but not when the matrix M_n was equal to or greater than the graft M_n. The threshold of electrical conductivity of the composites as a function of weight percent SWCNT increased from 0.2% when matrix M_n was less than graft M_n to about 1% when matrix M_n was greater than graft M_n. Dynamic mechanical analyses of the composites having graft M_n less than or equal to matrix M_n showed broader rubbery plateaus with increased SWCNT content but no significant differences between samples with different grafted PMMAs. The results indicate that lower M_n matrix wets the SWCNT‐g‐PMMA whereas higher M_n matrix does not wet the SWCNT‐g‐PMMA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39884.     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Poly(styrene‐co‐N‐butylmaleimide) macroinitiators by controlled autopolymerization and related block copolymers

Autopolymerization of styrene‐N‐butylmaleimide mixtures at 125 or 140°C in the presence of a stable nitroxyl radical [2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO)] was found to proceed in a pseudoliving manner. Unimolecular initiators, which were originated by trapping self‐generated radical species with TEMPO, took part in the process. Under the studied experimental conditions, the TEMPO‐controlled autopolymerization with a varying comonomer ratio provided virtually alternating copolymers of narrow molecular weight distributions. The molecular weights of the copolymers increased with conversions. The obtained styrene‐N‐butylmaleimide copolymers containing TEMPO end groups were used to initiate the polymerization of styrene. The polymerization yielded poly(styrene‐co‐N‐butylmaleimide)‐polystyrene block copolymers with various polystyrene chain lengths and narrow molecular weight distributions. The compositions, molecular weights, and molecular weight distributions of the synthesized block copolymers and the initial poly(styrene‐co‐N‐butylmaleimide) precursors were evaluated using nitrogen analysis, gel permeation chromatography, and ¹H‐ and ¹³C‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2378–2385, 1999     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Controlled radical polymerization of styrene initiated by diethyldithiocarbamate‐mediated iniferters

We demonstrated that density functional theory calculations provide a prediction of the trends in C‐S bond dissociation energies and atomic spin densities for radicals using two model compounds as diethyldithiocarbamate (DC)‐mediated iniferters. On the basis of this information, we synthesized 2‐(N,N‐diethyldithiocarbamyl)isobutylic acid (DTCA) and (4‐cyano‐4‐diethyldithiocarbamyl)pentanoic acid (CDPA) as DC‐mediated iniferters. Free‐radical polymerizations of styrene (St) were carried out in benzene initiated by DTCA or CDPA under UV irradiation. The first‐order time‐conversion plots showed the straight line for the UV irradiation system initiated by CDPA indicating the first order in monomer. The number‐average molecular weight (M_n) of the polystyrene (PSt) increased in direct proportion to monomer conversion. The molecular weight distribution (M_w/M_n) of the PSt was in the range of 1.3–1.7. It was concluded this polymerization system proceeded with a controlled radical mechanism. However, photopolymerization of styrene initiated by DTCA showed nonliving polymerization consistent with UV initiation. Theoretical predictions supported these experimental results. Methacrylic acid (MA) could also be polymerized in a living fashion with such a PSt precursor as a macroinitiator because PSt exhibited a DC group at its terminal end. This system could be applied to the architecture of block copolymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 413–418, 2005     

Synthesis of alkyne‐terminated xanthate RAFT agents and their uses for the controlled radical polymerization of N‐vinylpyrrolidone and the synthesis of its block copolymer using click chemistry

Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X₃) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X₄) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X₃ showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X₃ showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (M_n) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by ¹H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, ¹H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymerization of styrene using bis(β‐ketoamino)nickel(II)/methylaluminoxane catalytic systems

Styrene (St) was polymerized in toluene solution by using bis(β‐ketoamino)nickel(II) complex as the catalyst precursor and methylaluminoxane (MAO) as the cocatalyst. The polymerization conditions, such as Al : Ni ratio, monomer concentration, reaction temperature, and polymerization time, were studied in detail. Both of the bis(β‐ketoamino)nickel(II)/MAO catalytic systems exhibited higher activity for polymerization of styrene, and polymerization gave moderate molecular weight of polystyrene with relatively narrow molecular weight distribution (M_w/M_n < 1.6). The obtained polymer was confirmed to be atactic polystyrene by analyzing the stereo‐triad distributions mm, mr, and rr of aromatic carbon C¹ in NMR spectrum of the polymer. The mechanism of the polymerization was also discussed and a metal–carbon coordination mechanism was proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry