Nonisothermal crystallization behavior of poly (butylene terephthalate)–poly (ethylene terephthalate‐co‐isophthalate‐co‐sebacate) segmented copolyesters

In this paper, two different analytical methods were applied to investigate nonisothermal crystallization behavior of copolyesters prepared by melting transesterification processing from bulk polyesters involving poly (butylene terephthalate) (PBT) and ternary amorphous random copolyester poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) (PETIS). The results show that the half‐time of crystallization of copolyesters depended on the reaction time and decreased with the content of ternary polyesters in the amorphous segment. The modified Avrami model describes the nonisothermal crystallization kinetics very well. The values of the Avrami exponent range from 2.2503 to 3.7632, and the crystallization kinetics constant ranges from 0.0690 to 0.9358, presenting a mechanism of three‐dimensional spherulitic growth with heterogeneous nucleation. Ozawa analysis, however, failed to describe the nonisothermal crystallization behavior of copolyesters, especially at higher cooling rate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1232–1238, 2003     

Rheological and thermal properties of blends of modified poly(ethylene terephthalate) with p‐acetoxybenzoic acid and poly(butylene terephthalate)

Blending of thermotropic liquid crystalline polyesters (LCPs) with conventional polymers could result in materials that can be used as an alternative for short fiber‐reinforced thermoplastic composites, because of their low melt viscosity as well as their inherent high stiffness and strength, high use temperature, and excellent chemical resistance and low coefficient of expansion. In most of the blends was used LCP of 40 mol % of poly(ethylene terephthalate) (PET) and 60 mol % of p‐acetoxybenzoic acid (PABA). In this work, blends of several copolyesters having various PABA compositions from 10 to 70 mol % and poly(butylene terephthalate) (PBT) were prepared and their rheological and thermal properties were investigated. For convenience, the copolyesters were designated as PETA‐x, where x is the mol % of PABA. It was found that PET‐60 and PET‐70 copolyesters decreased the melt viscosity of PBT in the blends and those PBT/PETA‐60 and PBT/PETA‐70 blends showed different melt viscosity behaviors with the change in shear rate, while blends of PBT and PET‐x having less than 50 mol % of PABA exhibited totally different rheological behaviors. The blends of PBT with PETA‐50, PETA‐60, and PETA‐70 showed the morphology of multiple layers of fibers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1797–1806, 1999     

Postcrosslinking of linear polyesters. I melt-blend-type UV-induced crosslinking agents

Postcrosslinking of such linear polyesters as poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) are known to be attractive means to improve their thermal resistances without sacrificing their melt processibilities. Effective melt-blend-type ultraviolet-induced crosslinking agents were investigated among allyl compounds. Such polyallyl compounds as triallyl cyanurate and triallyl isocyanurate were found to be practically promising agents from the viewpoints of crosslinkability and stability in the polyester melt. The crosslinkability of the ally compounds increased with increasing the number of the allyl groups in the molecule and electron-withdrawing property of the neighboring group to which the allyl group was attached. The crosslinking mechanism likely includes both the polymerization of the allyl compound to form semi-interpenetrating polymer networks in the polyester matrix and the reaction between the polyester and the allyl compound moiety. The crosslinked PET and PBT showed good mechanical properties even above the melting points of the ordinary PET and PBT.     

Blends of thermoplastic polyesters with amorphous polyamide. I. Thermal and crystallization behavior

The thermal and crystallization behavior of blends of three thermoplastic polyesters with different degrees of crystallizability, with an amorphous aromatic polyamide is reported. The thermoplastic polyesters used in the investigation were poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET) and a co-polyester of 1,4 cyclohexane-dimethanol, ethylene glydol and terephthalic acid (PETG). The blends exhibited a single glass transition temperature indicating mlseibility in the amorphous phase. The results of thermal analysis indicated that the crystallization of all the three polyesters is facilitated in the molten phase as a result of blending. The blending significantly Increased the degree of crystallinity of PET, but there was no change in the crystallinity of PBT. It is thus observed that the extent of change in both the crystallization rate and the degree of crystallinity of polyesters depend on the inherent crystallizability of the individual polyester.     

Synthesis and thermal characterization of random poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) (PBT/MET) was synthesized by incorporating 1,2‐propandiol(1,2‐PDO) into PBT chains. The molar composition and chemical structure of PBT/MET copolyesters were confirmed by means of FT‐IR and ¹H‐NMR. To investigate the effect of 1,2‐PDO on the thermal properties of PBT/MET copolyesters, the copolymerizations were carried out by varying various contents of MET units, and the prepared materials were evaluated by differential scanning calorimetry and thermogravimetric analysis. Results suggested that with the increase of the content of 1,2‐PDO, the amount of crystallinity and the melting temperature decline, while the glass transition temperature increases and the copolyesters become more transparent and brittle with respect to PBT homopolymer. In addition, the T_g‐composition and T_m‐composition data are well subjected to the Wood equation and Flory's equation, respectively. All these copolyesters are found to consist of the general trend displayed by copolymers reported elsewhere. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization kinetics of poly(1,4‐butylene‐co‐ethylene terephthalate)

The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4‐butylene‐co‐ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4‐butanediol/ethylene glycol were investigated using differential scanning calorimetry (DSC) at crystallization temperatures (T_c) which were 35–90 °C below equilibrium melting temperature . Although these copolymers contain both monomers in high proportion, DSC data revealed for copolymer crystallization behaviour. The reason for such copolymers being able to crystallize could be due to the similar chemical structures of 1,4‐butanediol and ethylene glycol. DSC results for isothermal crystallization revealed that random copolymers had a lower degree of crystallinity and lower crystallite growth rate than those of homopolymers. DSC heating scans, after completion of isothermal crystallization, showed triple melting endotherms for all these polyesters, similar to those of other polymers as reported in the literature. The crystallization isotherms followed the Avrami equation with an exponent n of 2–2.5 for PET and 2.5–3.0 for PBT and PBETs. Analyses of the Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT and PET had higher growth rate constant G_o, and nucleation constant K_g than those of PBET copolymers. © 2001 Society of Chemical Industry     

Syntheses and characterization of poly(butylene terephthalate) copolyesters modified with p‐acetoxybenzoic acid

Poly(butylene terephthalate) (PBT) copolyesters modified with seven compositions of p‐acetoxybenzoic acid (PABA) ranging from 10 to 70 mol % were prepared. The X‐ray diffraction patterns, the polarizing microscopy behaviors, and thermal analysis showed that the modified PBT contained more PABA homopolymer units (PABA–PABA) than PBT–PABA units in the copolyesters. On increasing PABA mole percenage, PBT crystallinity decreased and thermal stability increased. It was found that although the PBT copolyesters did not exhibit a clear liquid crystalline texture like the copolyester of poly(ethylene terephthalate) modified with PABA did, the PBT copolyester containing 70 mol % of PABA exhibited the typical shear thinning behavior of a liquid crystalline polymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1085–1095, 2001     

Poly(ethylene terephthalate‐co‐isophthalate) copolyesters obtained from ethylene terephthalate and isophthalate oligomers

A series of poly(ethylene terephthalate‐co‐isophthalate) copolyesters containing upto 50%‐mole of isophthalic units were prepared by polycondensation from ethylene terephthalate and ethylene isophthalate fractions of linear oligomers containing from 5 to 6 repeating units in average. The polyesters were obtained in good yields and with high‐molecular‐weights. The microstructure of the copolyesters was studied as a function of reaction time by ¹³C‐NMR showing that a random distribution of the comonomers was achieved since the earlier stages of polycondensation. The melting temperature and enthalpy of the copolyesters decreased with the content of isophthalic units so that copolyesters containing more than 25% of these units were amorphous. Isothermal crystallization studies made on crystalline copolyesters revealed that the crystallization rate of copolyesters decreased with the content in isophthalic units. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Sequence distribution,thermal properties,and crystallization studies of poly(trimethylene terephthalate‐co‐1,4‐cyclohexylene dimethylene terephthalate) copolyesters

A series of novel poly(trimethylene terephthalate‐co‐1,4‐cyclohexylene dimethylene terephthalate) (PTCT) with various compositions were synthesized by melt polycondensation of 1,3‐propanediol, 1,4‐cyclohexanedimethanol and dimethyl terephthalate. The resulting copolyesters were characterized using ¹³C and ¹H nuclear magnetic resonance. The average length of both trimethylene terephthalate (TT) and cyclohexylene dimethylene terephthalate (CT) sequences varies from 1 to 10, and the chain structure is statistically random. The crystallization was investigated using wide angle X‐ray diffractometer (WAXD) and differential scanning calorimeter. The WAXD patterns can be divided in two groups according to the composition: copolyesters with less than 35 mol % CT content exhibit PTT‐type lattice, and those with CT unit content higher than 42 mol % crystallize with the PCT‐type lattice. The crystallizability of CT sequence is higher than that of TT sequence. Thermodynamic analysis shows that the comonomer is excluded from the PTT‐type or PCT‐type crystal of the copolyesters. The thermal decomposition temperature of copolyesters increases with increasing CT content, and their thermal stability is improved as compared to that of PTT. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crystallization and photo‐curing kinetics of biodegradable poly(butylene succinate‐co‐butylene fumarate) short‐segmented block copolyester

Short‐segmented block copolymers of poly(butylene succinate‐co‐butylene fumarate) were synthesized and their crystallinity and crosslinking behavior were investigated. ¹H NMR was used to characterize the microstructure and composition of the copolyesters. Molecular weight determination was performed using gel permeation chromatography. Based on the DSC results all copolyesters were crystalline and the degree of crystallinity of the copolymers did not change with butylene fumarate mole fraction due to co‐crystallization of the butylene succinate and butylene fumarate groups. Crosslinked copolyesters showed a lower crystallization rate and degree of crystallinity while the crystallization temperature shifted to higher temperatures compared with uncrosslinked copolyesters due to the formation of nucleating agents by crosslinkages. Photo‐DSC was used to investigate the crosslinking kinetics for UV‐initiated photo‐curing. Three kinetics parameters including the rate constant (k) and the orders of the initiation and propagation reactions (m and n, respectively) were determined for the quenched and unquenched copolymers. © 2016 Society of Chemical Industry     

Nonisothermal crystallization behavior of biodegradable poly(butylene terephthalate‐co‐butylene adipate‐co‐ethylene terephthalate‐co‐ethylene adipate) copolyester

A series of biodegradable aliphatic‐aromatic copolyester, poly(butylene terephthalate‐co‐butylene adipate‐co‐ethylene terephthalate‐co‐ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4‐butanediol (BG) and ethylene glycol (EG) by direct esterification and polycondensation. The nonisothermal crystallization behavior of PBATE copolyesters was studied by the means of differential scanning calorimeter, and the nonisothermal crystallization kinetics were analyzed via the Avrami equation modified by Jeziorny, Ozawa analysis and Z.S. Mo method, respectively. The results show that the crystallization peak temperature of PBATE copolyesters shifted to lower temperature at higher cooling rate. The modified Avrami equation could describe the primary stage of nonisothermal crystallization of PBATE copolyesters. The value of the crystallization half‐time (t_1/2) and the crystallization parameter (Z_c) indicates that the crystallization rate of PBATE copolyesters with more PTA content was higher than that with less PTA at a given cooling rate. Ozawa analysis was not suitable to study the nonisothermal crystallization process of PBATE copolyesters, but Z.S. Mo method was successful in treatingthis process. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Synthesis and characterization of copolymers based on poly(butylene terephthalate) and ethylene oxide‐poly(dimethylsiloxane)‐ethylene oxide

A series of thermoplastic elastomers based on ethylene oxide‐poly(dimethylsiloxane)‐ethylene oxide (EO‐PDMS‐EO), as the soft segment, and poly(butylene terephthalate) (PBT), as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reaction of dimethyl terephthalate (DMT) with 1,4‐butanediol (BD) and α,ω‐dihydroxy‐(EO‐PDMS‐EO). Copolymers with a content of hard PBT segments between 40 and 90 mass % and a constant length of the soft EO‐PDMS‐EO segments were prepared. The siloxane prepolymer with hydrophilic terminal EO units was used to improve the miscibility between the polar comonomers, DMT and BD, and the nonpolar PDMS. The molecular structure and composition of the copolymers were determined by ¹H‐NMR spectroscopy, whereas the effectiveness of the incorporation of α,ω‐dihydroxy‐(EO‐PDMS‐EO) into the copolymer chains was verified by chloroform extraction. The effects of the structure and composition of the copolymers on the melting temperatures and the degree of crystallinity, as well as on the thermal degradation stability and some rheological properties, were studied. It was demonstrated that the degree of crystallinity, the melting and crystallization temperatures of the copolymers increased with increasing mass fraction of the PBT segments. The thermal stability of the copolymers was lower than that of PBT homopolymer, because of the presence of thermoliable ether bonds in the soft segments. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Phase behavior of blends containing amorphous poly(resorcinol phthalate‐block‐carbonate) and semicrystalline polyesters

The phase behavior of poly(resorcinol phthalate‐block‐carbonate) (RPC) with engineering polyesters was investigated by using differential scanning calorimeter (DSC) and dynamic mechanical analysis. RPC was found to form miscible blends with poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), and poly(cyclohexylmethylene terephthalate) (PCT), but was partially miscible with poly(1,4‐cyclohexanedimethylene‐1,4‐cyclohexanedicarboxylate) (PCCD) in the melt state and below the melting temperature (T_m). The degree of melting‐point depression indicates that the RPC is most miscible with PCT followed by PET and then PBT. Furthermore, with the help of empirical DSC data and the Nishi–Wang equation, the interaction parameters between RPC and PET, PBT, and PCT were quantified to be ?0.36, ?0.33, and ?0.54, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and Characterization of Novel Thermotropic Aromatic-Aliphatic Biodegradable Copolyesters Containing D,L-Lactic acid (LA), Poly(butylene terephthalate) (PBT) and Biomesogenic Units

In this study, the copolyesters based on 4-hydroxybenzoic acid (HBA) and vanillic acid (VA), lactic acid (LA) and poly(butylene terephthalate) (PBT) were synthesized via melt polymerization and fully characterized by various measurements. The influences of content of HBA and VA units on thermal behavior, structure and degree of crystallinity of copolyesters were discussed in more detail. It was found that the copolymerization of aliphatic and aromatic units together could make the best use of advantages of the respective polyesters. Moreover, the copolyesters with more than 40 mol% of HBA and VA units could show liquid crystallinity in broad temperature range.     

Isothermal and non‐isothermal crystallization of poly(L‐lactic acid)/poly(butylene terephthalate) blends

Isothermal and non‐isothermal crystallization kinetics of poly(l ‐lactic acid)/poly(butylene terephthalate) (PLLA/PBT) blends containing PLLA as major component is detailed in this contribution. PLLA and PBT are not miscible, but compatibility of the polymer pair is ensured by interactions between the functional groups of the two polyesters, established upon melt mixing. Crystal polymorphism of the two polyesters is not influenced by blending, as probed by wide‐angle X‐ray analysis. The addition of PLLA does not affect the temperature range of crystallization kinetics of PBT, nor the crystallinity level attained when the blends are cooled from the melt at constant rate. Conversely, PBT favors crystallization of the biodegradable polyester. The addition of PBT results in an anticipated onset of crystallization of PLLA during cooling at a fixed rate, with a sizeable enhancement of the crystal fraction. Isothermal crystallization analysis confirmed the faster crystallization rate of PLLA in the presence of PBT. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40372.     

Poly(butylene terephthalate)/ poly(ethylene‐co‐alkyl acrylate)/ carbon black conductive composites: Influence of composition and morphology on electrical properties

Poly(butylene terephthalate)/Poly(ethylene‐co‐alkyl‐acrylate)/carbon black (PBT‐EXA‐CB) blends, prepared through extrusion, were characterized as electrical conductive materials. In the composition range studied (55 ≤ PET % ≤ 75 w/w 5.5 ≤ CB % ≤ 11.1 w/w), various conductive behaviors were observed depending mainly on composition and poly(olefin) crystallinity. The observed positive temperature coefficient (PTC) is quite small compared to poly(olefin)‐CB systems, and our blends do not present a negative temperature coefficient (NTC) on complete melting of the CB‐containing phase, thus offering new possibilities for a regular electric power control. Volume expansion of both PBT and EXA was postulated to be the main parameter responsible for the thermal resistivity evolution through the range +20 to +170°C. A double‐percolation system between both the co‐continuous polymer phases and CB‐particles included in the poly(olefin) phase is postulated to explain these results.     

Preparation and biodegradation of copolyesters based on poly(ethylene terephthalate) and poly(ethylene glycol)/oligo(lactic acid) by transesterification

The poly(ethylene terephthalate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolymers were successfully prepared by the melt reaction between poly(ethylene terephthalate), poly(ethylene glycol), and DL ‐oligo(lactic acid) without any catalysts. The transesterification between ethylene terephthalate, ethyleneoxide, and lactide segments during the reaction was confirmed by the ¹H NMR analysis. The effect of reaction temperatures and the starting feed ratios on the molecular microstructures, molecular weights, solubility, thermal properties, and degradability of the copolyesters was extensively studied. The values of crystallization temperature, melting temperature, crystallization, and melting enthalpy of the copolyesters were found to be influenced by the reaction temperatures, starting feed ratios, etc. The copolyesters showed good tensile properties and were found to degrade in the soil burial experiments during the period of 3 months. The morphology of the copolyester films were also investigated by scanning electron microscopy during soil burial degradation. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

The conformational changes,crystal structure and melting behavior of poly(ethylene/ trimethylene terephthalate) copolyesters

The conformational changes, crystal structure and melting behavior of poly(ethylene/trimethylene terephthalate) (ET) copolyesters were investigated using in situ Fourier transform infrared (FTIR) spectroscopy, wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) under isothermal crystallization conditions. The results show that the minimum melting temperature was observed in ET53, in which the relative amount of ethylene glycol (EG) to 1,3‐propanediol (PDO) was 52.68/47.32 and the PDO‐dimethyl terephthalate (DMT)‐PDO segments in the molecular chain dominated the crystal formation. The minimum crystallinity of ET copolyesters was found in ET66, in which the relative amount of EG/PDO was 65.91/34.09 and the EG‐DMT‐EG segments in the molecular chain dominated the crystal formation. A rapid and continuous conformational transition in ET copolyesters was observed using in situ FTIR in the first 10 min under isothermal crystallization conditions. The continuously adjusting conformation in the molecules reflects the crystallization of ET copolyesters. Based on the DSC and the X‐ray analyses of the crystallization behavior in the ET copolyesters, crystalline conformation transitions of molecules in ET copolyesters take place rapidly and early. Copyright © 2012 Society of Chemical Industry     

Thermoplastic elastomers derived from bio‐based monomers

Series of copolyesters based on poly(propylene succinate) (PPS) and poly(butylene succinate) (PBS), which can be produced from biological feedstock, and postconsumer poly(ethylene terephthalate) (PET) were synthesized with the aim of developing sustainable materials, which combine the mechanical properties of high performance elastomers with those of flexible plastics. The aliphatic polyesters were synthesized by the catalyzed two‐step transesterification reaction of dimethyl succinate, 1,3‐propanediol, and 1,4‐butanediol followed by melt reaction with PET in bulk. The content of PET segments in the polymer chains was varied from about 10 to 100 wt % per 100 wt % PPS or PBS. The effect of the introduction of the PET segments on the structure, thermal, physical, and mechanical properties was investigated. The composition and structure of these aliphatic/aromatic copolyesters were determined by NMR spectroscopy. The thermal properties were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The level of crystallinity was studied by means of DSC and wide‐angle X‐ray scattering. A depression of melting temperature and a reduction of crystallinity of copolyesters with increasing content of PET segments were observed. Consequently, the tensile modulus and strength of copolyesters decreased, and the elongation at break increased with PET content in the range of 10?50 wt %. Thus, depending on PET content, the properties of copolyesters can be tuned ranging from semicrystalline polymers possessing good tensile modulus (380 MPa) and strength (24 MPa) to nearly amorphous polymer of high elongation (～800%), and therefore they may find applications in thermoplastics as well as elastomers or impact modifiers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39815.     

A comparative radiation degradation of some aromatic polyesters

Summary A comparative investigation of radiation degradation of poly(1,4-butylene terephthalate), PBT; poly(ethylene terephthalate), PET; and poly(ethylene 2,6-naphthalene-dicarboxylate), PEN, was carried out. These polyesters were irradiated under vacuum at doses from 0.5 to 4 MGy. Data on solubility of the irradiated polyesters revealed absence of cross-linking. Molecular weights of PBT and PET decreased noticeably after irradiation, and radiation-chemical yields of destruction were quantified. NMR and UV spectra revealed changes in molecular structure upon irradiation of PBT. Efficiency and mechanism of radiation degradation of PBT, PET and PEN were discussed.