Synthesis,characterization, and thermal behavior study of methyl methacrylate polymers containing 4‐carbazole substitutes

A new polymerizable monomer, [4‐(9‐ethyl)carbazolyl]methyl methacrylate ( 2 ), was synthesized by reacting of methacrylic acid and 4‐hydroxymethyl‐9‐ethyl carbazole ( 1 ) by esterification procedure in the presence of N,N′‐dicyclohexylcarbodiimide. The resulting monomer was then polymerized free‐radically to form the poly(methyl methacrylate) containing 4‐(9‐ethyl)carbazolyl pend ent groups. Also, copolymerization of monomer 2 with various acrylic monomers such as methyl methacrylate, ethyl methacrylate, methyl acrylate, ethyl acrylate, and n‐butyl acrylate by azobisisobutyronitrile as a free radical polymerization initiator gave the related copolymers in high yields. The structure of all the resulted compounds was characterized and confirmed by FTIR and ¹H NMR spectroscopic techniques. The average molecular weight of the obtained polymers was determined by gel permeation chromatography using tetrahydrofurane as the solvent. The thermal gravimetric analysis and differential scanning calorimeter instruments were used for studying of thermal properties of polymers. It was found that, with the incorporation of bulky 4‐(9‐ethyl)carbazolyl substitutes in side chains of methyl methacrylate polymers, thermal stability and glass transition temperature of polymers are increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4989–4995, 2006     

An experimental and theoretical study of the carbazole to carbazole intramolecular energy transfer in N‐vinylcarbazole/vinyl tert‐butyl‐benzoate copolymers of different molar compositions

Fluorescence depolarization and quenching measurements of N‐vinyl carbazole/vinyl tert‐butyl‐benzoate copolymers in dilute solution of several fluid solvents and in a rigid poly(methyl methacrylate) matrix were performed to study the effect of copolymer composition on the intramolecular energy transfer (IET) between carbazole groups (Cz) along the polymer chain. IET efficiency, as the amount of Cz? Cz intramolecular excimer formation, monotonically increases with Cz content up to a number average sequence length of carbazole of ca 12 (Cz molar content ≥ 90%). After this value, IET efficiency remains almost constant. Molecular dynamics simulations on isotactic and syndiotactic copolymer fragments of several monomer compositions were used for obtaining different parameters related to the efficiency for the IET process between Cz units along the polymer chain. Copyright © 2011 Society of Chemical Industry     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Synthesis and photopolymerization of acrylic acrylate copolymers

Acrylate‐functionalized copolymers were synthesized by the modification of poly(butyl acrylate‐co‐glycidyl methacrylate) (BA/GMA) and poly(butyl acrylate‐co‐methyl methacrylate‐co‐glycidyl methacrylate). ¹³C‐NMR analyses showed that no glycidyl methacrylate block longer than three monomer units was formed in the BA/GMA copolymer if the glycidyl methacrylate concentration was kept below 20 mol %. We chemically modified the copolymers by reacting the epoxy group with acrylic acid to yield polymers with various glass‐transition temperatures and functionalities. We studied the crosslinking reactions of these copolymers by differential scanning calorimetry to point out the effect of chain functionality on double‐bond reactivity. Films formed from acrylic acrylate copolymer precursors were finally cured under ultraviolet radiation. Network heterogeneities such as pendant chains and highly crosslinked microgel‐like regions greatly influenced the network structure and, therefore, its viscoelastic properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 753–763, 2002     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Thermal and sonochemical degradation kinetics of poly(n‐butyl methacrylate‐co‐alkyl acrylates): Variation of chain strength and stability with copolymer composition

The thermal degradation of poly(n‐butyl methacrylate‐co‐alkyl acrylate) was compared with ultrasonic degradation. For this purpose, different compositions of poly (n‐butyl methacrylate‐co‐methyl acrylate) (PBMAMA) and a particular composition of poly(n‐butyl methacrylate‐co‐ethyl acrylate) (PBMAEA) and poly(n‐butyl methacrylate‐co‐butyl acrylate) (PBMABA) were synthesized and characterized. The thermal degradation of polymers shows that the poly(alkyl acrylates) degrade in a single stage by random chain scission and poly(n‐butyl methacrylate) degrades in two stages. The number of stages of thermal degradation of copolymers was same as the majority component of the copolymer. The activation energy corresponding to random chain scission increased and then decreased with an increase of n‐butyl methacrylate fraction in copolymer. The effect of methyl acrylate content, alkyl acrylate substituent, and solvents on the ultrasonic degradation of these copolymers was investigated. A continuous distribution kinetics model was used to determine the degradation rate coefficients. The degradation rate coefficient of PBMAMA varied nonlinearly with n‐butyl methacrylate content. The degradation of poly (n‐butyl methacrylate‐co‐alkyl acrylate) followed the order: PBMAMA < PBMAEA < PBMABA. The variation in the degradation rate constant with composition of the copolymer was discussed in relation to the competing effects of the stretching of the polymer in solution and the electron displacement in the main chain. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Toughening effect of comonomer on acrylic denture base resin prepared via suspension copolymerization

In this article, three copolymers used as denture base resins were prepared via suspension copolymerization using butyl acrylate (BA), butyl methacrylate (BMA), or methyl acrylate (MA) with methyl methacrylate (MMA), respectively. The homopolymers and copolymers were characterized by ¹³C nuclear magnetic resonance (¹³C NMR). The influence of the three comonomers on the mechanical property was investigated in details and the fracture surfaces of copolymer specimens were examined using scanning electron microscopy (SEM). Meanwhile, the T_g values of three copolymers were examined by differential scanning calorimetry (DSC). The results indicate that, poly(methyl methacrylate) (PMMA) copolymers with BA, BMA, or MA have been successfully prepared via suspension copolymerization. The presence of BA, BMA, or MA could improve the mechanical property especially the impact strength, the toughness of the materials was remarkably improved. The toughening effect of BMA monomer is most significant. When the content of BA is 2 wt %, the flexural strength improves by 51% and the impact strength improves by 81.3%. The T_g values of three copolymers all decrease. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

High molecular weight diblock and ABA/ABC triblock copolymers of tert‐butyl (meth)acrylate

AB diblock copolymers were prepared by use of poly(tert‐butyl (meth)acrylate) (PtBA/PtBMA) as monofunctional macroinitiator in atom transfer radical polymerization of various (meth)acrylates (methyl, butyl) in the presence of the CuBr/N, N, N′, N′, N″‐pentamethyldiethylenetriamine catalyst system. Then using the diblock copolymer as macroinitiator with a bromine atom at the chain end, ABC and ABA triblock copolymers containing at least one PtBA or PtBMA segment were synthesized via polymerization of the selected (meth)acrylic monomer. Gel permeation chromatography was applied to determine molecular weights and polydispersity indices. The latter, for block copolymers prepared without deactivator addition, were in the range 1.2‐1.6 with a high degree of polymerization (150‐500). The chemical compositions of the block copolymers were characterized with ¹H nuclear magnetic resonance. The kind of combined segments and their lengths influenced the glass transition temperature (T_g) determined by differential scanning calorimetry. Copyright © 2012 Society of Chemical Industry     

Modeling and experimental studies of emulsion copolymerization systems. III. Acrylics

Using a previously published model and continuing the series of papers started with styrenic copolymers, predictions for evolution of conversion and average particle diameter in batch experiments are compared against experimental data for four emulsion copolymerizations involving at least one acrylic monomer: (1) methyl methacrylate/butyl acrylate, (2) methyl methacrylate/butadiene, (3) methyl methacrylate–vinyl acetate, and (4) butyl acrylate/vinyl acetate. For each system a fraction of factorial experiments were run covering simultaneous variations in five variables: initiator [I] and surfactant [E] concentrations, water to monomer ratio (W/M), monomer composition, and temperature. Data fitting is performed to represent the experimental data as several parameters are not available from independent experimental sources. The model is able to explain the effects of simultaneous changes in emulsifier concentration, initiator concentration, and water to monomer ratio on conversion and average particle size histories, although in some cases only qualitatively. An assessment of the degree in which a general emulsion copolymerization model is useful for practical applications is made. Physical insight is also gained by observing the trends of adjusted parameters with temperature and copolymer composition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1320–1338, 2002; DOI 10.1002/app.10003     

Synthesis of well‐defined,functionalized polymer latex particles through semicontinuous emulsion polymerization processes

The design of a semicontinuous emulsion polymerization process, primarily based on theoretical calculations, has been carried out with the objective of achieving overall independent control over the latex particle size, the monodispersity in the particle size distribution, the homogeneous copolymer composition, the concentration of functional groups (e.g., carboxyl groups), and the glass‐transition temperature with n‐butyl methacrylate/n‐butyl acrylate/methacrylic acid as a model system. The surfactant coverage on the latex particles is very important for maintaining a constant particle number throughout the feed process, and this results in the formation of monodisperse latex particles. A model has been set up to calculate the surfactant coverage from the monomer feed rate, surfactant feed rate, desired solid content, and particle size. This model also leads to an equation correlating the polymerization rate to the instantaneous conversion of the monomer or comonomer mixture. This equation can be used to determine the maximum polymerization rate, only below or at which monomer‐starved conditions can be achieved. The maximum polymerization rate provides guidance for selecting the monomer feed rate in the semicontinuous emulsion polymerization process. The glass‐transition temperature of the resulting carboxylated poly(n‐butyl methacrylate‐co‐n‐butyl acrylate) copolymer can be adjusted through variations in the compositions of the copolymers with the linear Pochan equation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 30–41, 2003     

Morphologies of polybutylacrylate/poly(styrene‐co‐methyl methacrylate) latex prepared by starved emulsion polymerization Part I. Thermodynamics equilibrium morphology

Heterogeneous latexes were prepared by a semicontinuous seeded emulsion polymerization process under monomer starved conditions at 80 °C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(butyl acrylate) latexes were used as seeds. The second‐stage polymer was poly(styrene‐co‐methyl methacrylate). By varying the amounts of methyl methacrylate (MMA) in the second‐stage copolymer, the polarity of the copolymer phase could be controlled. Phase separation towards the thermodynamic equilibrium morphology was accelerated either by ageing the composite latex at 80 °C or by adding a chain‐transfer agent during polymerization. The morphologies of the latex particles were examined by transmission electron microscopy (TEM). The morphology distributions of latex particles were described by a statistical method. It was found that the latex particles displayed different equilibrium morphologies depending on the composition of the second‐stage copolymers. This series of equilibrium morphologies of [poly(butyl acrylate)/poly(styrene‐co‐methyl methacrylate)] (PBA/P(St‐co‐MMA)) system provides experimental verification for quantitative simulation. Under limiting conditions, the equilibrium morphologies of PBA/P(St‐co‐MMA) were predicted according to the minimum surface free energy change principle. The particle morphology observed by TEM was in good agreement with the predictions of the thermodynamic model. Therefore, the morphology theory for homopolymer/homopolymer composite systems was extended to homopolymer/copolymer systems. © 2002 Society of Chemical Industry     

Novel carbazole phenoxy-based methacrylates to produce high-refractive index polymers

A novel, high-refractive index homopolymer was produced by incorporating carbazole and phenol into the methacrylate monomer structure. The reaction of phenol with 9-(2,3-epoxypropyl)-carbazole, followed by the reaction of the carbazole phenoxy-based intermediate with methacryloyl chloride or methacrylic anhydride, and recrystallization from methanol, produced a good yield of highly pure carbazole phenoxy functionalized methacrylate monomer. Subsequent free radical polymerization or UV photopolymerization of the functionalized methacrylate monomer, in addition to copolymerizations with methyl methacrylate, provided for high-refractive index materials well suited for lightweight optical applications. Unlike N-vinyl carbazole, the novel carbazole phenoxy-based methacrylate readily copolymerized with methyl methacrylate. Statistical copolymers of carbazole based methacrylates with methyl methacrylate were produced by free radical solution polymerization in DMAC or by photopolymerization in DMF. The carbazole phenoxy-based methacrylate monomer was characterized for molecular weight using gel permeation chromatography (GPC), for melting point and glass transition temperature using differential scanning calorimetry (DSC), for decomposition using thermal gravimetric analysis (TGA), and for chemical composition by one- and two-dimensional ¹H nuclear magnetic resonance (NMR) spectroscopy and by elemental analysis. The AIBN initiated carbazole phenoxy-based methacrylate polymerization was followed using in situ FTIR, which showed the reaction to be complete within 40 min in DMAC at 90 °C. Refractive indices of the carbazole based methacrylate homopolymers and copolymers ranged from 1.52 to 1.63. PhotoDSC was used to determine the heat of polymerization (ΔH_p) for the carbazole phenoxy-based methacrylate (ΔH_p=−39.4 kJ/mol). The carbazole phenoxy-based methacrylate homopolymer had a surprisingly high onset of decomposition temperature (T_onset=316 °C). ¹³C NMR spectroscopy experiments and molecular modeling were used to explore the configuration of the polymerized carbazole phenoxy-based methacrylate. The lack of head-to-head linkages due to steric considerations reasonably explains the high thermal stability observed for the carbazole phenoxy-based methacrylate polymer.     

Synthesis of N-(2 amino benzothiazole) methacylamide monomer and its copolymers for antimicrobial coating application by RAFT polymerization

Monomer with thiazole moiety was synthesized and copolymerized with butyl acrylate and methyl methacrylate by reversible addition fragmentation chain transfer emulsion polymerization. The chain transfer agent was synthesized using N-ethyl piperazine, carbon disulfide, and ethyl 2-bromoisobutyrate. The wt% of monomer was varied from 3, 5, 7, 9, and 12 respectively. A antimicrobial activities of monomer and its copolymers were screened against E. coli, B. subtilis, C. albicans, and Aspergillus niger microorganisms. The synthesized monomer and chain transfer agent were characterized by ¹H NMR, FTIR, and mass spectral analysis, whereas emulsion copolymers were characterized for their molecular weight, particle size, and FTIR analysis.     

Effect of the monomer ratio on the properties of poly(methyl methacrylate butyl acrylate) latex‐modified mortars

This article deals with the effect of the monomer ratio on the typical properties of polymer‐modified mortars with poly(methyl methacrylate butyl acrylate) latices. Polymer‐modified mortars, with methyl methacrylate/butyl acrylate copolymer latices of various methyl methacrylate/butyl acrylate ratios, were prepared with different polymer/cement ratios and were tested for their workability, air content, compressive strength, flexural strength, and water absorption. On the basis of the test results, the effects of the monomer ratio and polymer/cement ratio on the typical properties were examined. The properties of the latex‐modified mortars were affected to a great extent by both the monomer ratio and polymer/cement ratio. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2403–2409, 2004     

n‐Butyl acrylate based latex interpenetrating polymer networks used as processing modifiers and impact modifiers of poly(vinyl chloride)

A latex interpenetrating polymer network (LIPN), consisting of poly(n‐butyl acrylate), poly(n‐butyl acrylate‐co‐ethylhexyl acrylate), and poly(methyl methacrylate‐co‐ethyl acrylate) and labeled PBEM, with 1,4‐butanediol diacrylate as a crosslinking agent was synthesized by three‐stage emulsion polymerization. The initial poly(n‐butyl acrylate) latex was agglomerated by a polymer latex containing an acrylic acid residue and then was encapsulated by poly(n‐butyl acrylate‐co‐ethylhexyl acrylate) and poly(methyl methacrylate‐co‐ethyl acrylate). A polyblend of poly(vinyl chloride) (PVC) and PBEM was prepared through the blending of PVC and PBEM. The morphology and properties of the polyblend were studied. The experimental results showed that the processability and impact resistance of PVC could be enhanced considerably by the blending of 6–10 phr PBEM. This three‐stage LIPN PBEM is a promising modifier for manufacturing rigid PVC. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1168–1173, 2004     

Synthesis and property behavior of dioctyl phthalate plasticized styrene–acrylate particles by Shirasu porous glass emulsification and subsequent suspension copolymerization

Two‐phase model styrene–acrylate copolymers were synthesized with a soft phase consisting of methyl acrylate, butyl acrylate, and butyl methacrylate. Besides the styrenic copolymers, copolymers containing a hard phase of methyl methacylate and methyl acrylate were also synthesized. Comonomer droplets with a narrow size distribution and fair uniformity were prepared using an SPG (Shirasu porous glass) membrane having pore size of 0.90 μm. After the single‐step SPG emulsion, the emulsion droplets were composed mainly of monomers, hydrophobic additives, and an oil‐soluble initiator, suspended in the aqueous phase containing a stabilizer and inhibitor. These were then transferred to a reactor, and subsequent suspension polymerization was carried out. Uniform copolymer particles with a mean diameter ranging from 3 to 7 μm, depending on the recipe, with a narrow particle size distribution and a coefficient of variation of about 10% were achieved. Based on the glass‐transition temperatures, as measured by differential scanning calorimetry, the resulting copolymer particles containing a soft phase of acrylate were better compatibilized with a hard phase of methyl methacrylate than with styrene with dioctyl phthalate (DOP) addition. Glass‐transition temperatures of poly(MMA‐co‐MA) particles were strongly affected by the composition drift in the copolymer caused by their substantial difference in reactivity ratios. Incorporation of DOP in the copolymer particles does not significantly affect the glass‐transition temperature of MMA‐ or MA‐containing copolymer particles, but it does affect the St‐containing copolymer and particle morphology of the copolymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3037–3050, 2003     

Narrow‐disperse or monodisperse crosslinked and functional core–shell polymer particles prepared by two‐stage precipitation polymerization

Narrow‐disperse and monodisperse cross‐linked core–shell polymer particles containing different functional groups, such as esters, hydroxyls, chloromethyls, carboxylic acids, amides, cyanos, and glycidyls, in the shell layers in the micrometer size range were prepared by a two‐stage precipitation polymerization in the absence of any stabilizer. Commercial divinylbenzene (DVB), containing 80% DVB, was precipitation polymerized in acetonitrile without any stabilizer as the first‐stage polymerization and was used as the core. Several functional monomers, including methyl methacrylate, ethyl methacrylate, butyl methacrylate, 2‐hydroxyethyl methacrylate, glycidyl methacrylate, methyl acrylate, ethyl acrylate, butyl acrylate, t‐butyl acrylate, i‐octyl acrylate, acrylic acid, acrylamide, acrylonitrile, styrene, and p‐chloromethyl styrene, were incorporated into the shells during the second‐stage polymerization. The resulting core–shell polymer particles were characterized with scanning electron microscopy and Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1776–1784, 2006     

Block copolymers obtained by free radical mechanism. II. Butyl acrylate and methyl methacrylate

Block copolymers were synthesized using methyl methacrylate and butyl acrylate as the monomers and a multifunctional initiator, di-t-butyl 4,4'-azobis(4-cyanoperoxyvalerate). The polymerizations for the formation of the block copolymers were carried out in two stages. First the poly(methyl methacrylate) polymeric initiator was synthesized and isolated. In the second stage, the thermallyactivated azo group in the polymer backbone initiated the polymerization of butyl acrylate. Upon termination by combination a tri-block results. Selective solvent fractionation was used to separate the block from the homopolymers.