Resin I: Synthesis,characterization, and ion‐exchange properties of terpolymer resins derived from 2,4‐dihydroxypropiophenone,biuret, and formaldehyde

Terpolymers (2,4‐DHPBF) were synthesized by the condensation of 2,4‐dihydro‐xypropiophenone, biuret, and formaldehyde in the presence of acid catalyst with varying the molar ratio of reacting monomers. Terpolymer composition has been determined on the basis of their elemental analysis and their number–average molecular weight of these resin were determined by conductometric titration in nonaqueous medium. The viscosity measurements were carried out in N,N‐dimethyl formamide which indicate normal behavior. IR spectra were studied to elucidate the structure. The terpolymer resin has been further characterized by UV–visible and ¹H‐NMR spectra. The newly synthesized terpolymers proved to be selective chelating ion‐exchange terpolymers for certain metals. The chelating ion‐exchange properties of this terpolymer was studied for Fe (III), Cu (II), Hg (II), Cd (II), Co (II), Zn (II), Ni (II), and Pb (II) ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake involving the measurement of the distribution of a given metal ion between the terpolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The terpolymer showed a higher selectivity for Fe (III), Hg (II), Cd (II), and Pb (II) ions than for Cu (II), Co (II), Zn (II), and Ni (II) ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Highly transparent and organosoluble polyimides derived from 2,2′‐disubstituted‐4,4′‐oxydianilines

Polypyrrole (PPy) and Polypyrrole‐ZnO (PPy‐ZnO) nanocomposites were electrodeposited on mild steel and its corrosion protection ability was studied by Tafel and Impedance techniques in 3.5% NaCl solution. Pure Polypyrrole film was not found to protect the mild steel perfectly but the coating with nano‐sized ZnO (PPy‐ZnO) has dramatically increased the corrosion resistance of mild steel. Electrochemical Impedance Spectroscopy (EIS) measurements indicated that the coating resistance (R_coat) and corrosion resistance (R_corr) values for the PPy‐ZnO nanocomposite coating was much higher than that of pure PPy coated electrode. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthetic resin. XII. Synthesis and characterization of new terpolymer resins derived from 8‐hydroxyquinoline 5‐sulfonic acid,melamine, and formaldehyde

Terpolymers 8‐hydroxyquinoline 5‐sulphonic acid–melamine–formaldehyde (8‐HQ5‐SAMF) were synthesized through the condensation of 8‐hydroxyquinoline 5‐sulfonic acid and melamine with formaldehyde in the presence of an acid catalyst. Four different terpolymers were synthesized with various molar proportions of the reacting monomers. The terpolymer resin compositions were determined on the basis of elemental analysis. The number‐average molecular weights of these resins were determined by conductometric titration in a nonaqueous medium; viscometric measurements in dimethyl sulfoxide were carried out to ascertain the characteristic functions and constants. Ultraviolet–visible, Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy and thermogravimetric analysis were used to elucidate the structures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Organosoluble polyimides derived from asymmetric 2‐substituted‐and 2,2′,6‐trisubstituted‐4,4′‐oxydianilines

We report a new method for the preparation of asymmetric diamines using 4,4′‐oxydianiline (4,4′‐ODA) as the starting material. By controlling the equivalents of bromination agent, N‐bromosuccinimide, we were able to attach bromide and phenyl substituents at the 2‐ or 2,2′,6‐positions of 4,4′‐ODA. Thus, four new asymmetric aromatic diamines, 2‐bromo‐4,4′‐oxydianiline (6), 2,2′,6‐tribromo‐4,4′‐oxydianiline (7), 2‐phenyl‐4,4′‐oxydianiline (8) and 2,2′,6‐triphenyl‐4,4′‐oxydianiline (9), were synthesized by this method. Their structural asymmetry was confirmed using ¹H NMR spectroscopy. Asymmetric polyimides (PI10–PI13) were prepared from these diamines and three different dianhydrides (pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride) in refluxing m‐cresol. The formed polyimides, except PI10a derived from 6 and PMDA, were all soluble in m‐cresol without premature precipitation during polymerization. These polyimides with inherent viscosity of 0.41–0.96 dL g^?1, measured at a concentration of 0.5 g dL^?1 in N‐methyl‐2‐pyrrolidone at 30 °C, can form tough and flexible films. Because of the structural asymmetry, they also exhibited enhanced solubility in organic solvents. Especially, polyimides PI11a and PI13a derived from 7 and 9 with rigid PMDA were soluble in various organic solvents at room temperature. The structural asymmetry of the prepared polyimides was also evidenced from ¹H NMR spectroscopy. In the ¹H NMR spectrum of PI11a, the protons of pyromellitic moiety appeared in an area ratio of 1:2:1 at three different chemical shifts, which were assigned to head‐to‐head, head‐to‐tail and tail‐to‐tail configurations, respectively. These polyimides also exhibited good thermal stability. Their glass transition temperatures ranged from 297 to 344 °C measured using thermal mechanical analysis. © 2013 Society of Chemical Industry     

Kinetics of thermal degradation studies of some new terpolymers derived from 2,4‐dihydroxypropiophenone,oxamide, and formaldehyde

The terpolymers (2,4‐DHPOF) have been synthesized by the condensation of 2,4‐dihydroxypropiophenone with oxamide and formaldehyde in the presence of 2M HCl as catalyst with varying proportions of reactants. Terpolymer composition has been determined on the basis of their elemental analysis. The terpolymer has been characterized by UV‐visible, IR, and ¹H NMR spectra. The thermal decomposition behavior of some new terpolymers was studied using thermogravimetric analysis in air atmosphere at heating rate of 10°C/min. Thermal decomposition curves are discussed with careful attention to minute details. The Freeman–Carroll and Sharp–Wentworth methods have been used to calculate activation energy and thermal stability. Thermal activation energy (E_a) calculated with the help of these methods are in agreement with each other. Thermodynamic parameters such as free energy change (ΔF), entropy change (ΔS), apparent entropy change (S*), and frequency factor (z) are also determined on the basis of the TG curves and by using data of the Freeman–Carroll method. The Freidman method evaluated the variation in the apparent activation energy changes by isoconversional (model‐free) kinetic methods. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Melamine - formaldehyde resins II.—Thermal degradation of model compounds and resins

The thermal degradation of a series of cured melamine-formaldehyde resins and of two relevant model compounds has been investigated using thermogravimetry accompanied by the analysis of volatile products. Low temperature degradation reactions which occur up to ～350°C involve the loss of water and formaldehyde, the latter arising from reversible demethylolation reactions. It is proposed that ether linkages, which model compound studies indicate would yield formaldehyde in the low temperature region, are not present to any significant degree in cured resins. Deep-seated rupture of the polycondensate system takes place at temperatures above ～375°C when a number of independent reactions involving both side-chain and ring degradation give rise to products among which ammonia, hydrogen cyanide, carbon monoxide and melamine have been examined.     

Resistive switching characteristics of polyimides derived from 2,2′‐aryl substituents tetracarboxylic dianhydrides

2,2′‐Position aryl‐substituted tetracarboxylic dianhydrides including 2,2′‐bis(biphenyl)‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride and 2,2′‐bis[4‐(naphthalen‐1‐yl)phenyl)]‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride were synthesized. A new series of aromatic polyimides (PIs) were synthesized via a two‐step procedure from 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride and the newly synthesized tetracarboxylic dianhydrides monomers reacting with 2,2′‐bis[4′‐(3″,4″,5″‐trifluorophenyl)phenyl]‐4,4′‐biphenyl diamine. The resulting polymers exhibited excellent organosolubility and thermal properties associated with T_g at 264 °C and high initial thermal decomposition temperatures (T_5%) exceeding 500 °C in argon. Moreover, the fabricated sandwich structured memory devices of Al/PI‐a/ITO was determined to present a flash‐type memory behaviour, while Al/PI‐b/ITO and Al/PI‐c/ITO exhibited write‐once read‐many‐times memory capability with different threshold voltages. In addition, Al/polymer/ITO devices showed high stability under a constant stress or continuous read pulse voltage of ? 1.0 V. Copyright © 2011 Society of Chemical Industry     

Resin I: Synthesis and characterization of 2,2′‐dihydroxybiphenyl–urea–formaldehyde terpolymers

Terpolymer resins (BPhUF) were synthesized by the condensation of 2,2′‐dihydroxybiphenyl [BPh] and urea [U] with formaldehyde [F] in the presence of an acid catalyst and using varied molar ratios of reacting monomers. Terpolymer resin compositions have been determined on the basis of their elemental analysis and the number average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurements in dimethyl formamide have been carried out with a view to ascertain the characteristic functions and constants. UV‐VIS, IR, and NMR spectra were studied to elucidate the structure. studied to elucidate the structure. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1605–1610, 2005     

Terpolymer resin–III: Synthesis and characterization of 8‐hydroxyquinoline–dithiooxamide–formaldehyde terpolymer resins

Terpolymer resins (8‐HQDF) were synthesized by the condensation of 8‐hydroxyquinoline (8‐HQ) and dithiooxamide (D) with formaldehyde (F) in the presence of acid catalyst and using varied molar ratios of reacting monomers. Terpolymer resins compositions have been determined on the basis of their elemental analysis and the number average molecular weights of these resins were determined by conductometric titration in non‐aqueous medium. Viscometric measurements in dimethyl formamide (DMF) have been carried out with a view to ascertain the characteristic functions and constants. The UV‐visible, FTIR, and proton nuclear magnetic resonance (H⁺ NMR) spectra were studied to elucidate the structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chelating resins VI: Chelating resins of formaldehyde condensed phenolic Schiff bases derived from 4,4′‐diaminodiphenyl ether with hydroxybenzaldehydes—synthesis,characterization, and metal ion adsorption studies

Phenolic Schiff bases derived from o‐, m‐, and p‐hydroxybenzaldehydes and 4, 4′‐diaminodiphenyl ether were subjected to polycondensation reaction with formaldehyde. The resins were found to form polychelates readily with several metal ions. The materials were characterized by elemental analysis, GPC, IR, UV‐Vis, ¹H‐NMR, XRD, and thermal analyses like TG, DTG, and DSC studies. The ¹H‐NMR spectra of the resins provided evidence of polycondensation with well‐defined peaks for bridging methylene and terminal methylol functions. The metal‐ligand bonds were registered in the IR spectra of the polychelates. The thermal analysis data provided the kinetic parameters like activation energy, frequency factor, and entropy changes associated with the thermal decomposition. These data indicated the resins to be more stable than the polychelates. The DSC and XRD data indicated that the incorporation of metal ions significantly enhanced the crystallinity of the polymers. The resins could adsorb several metal ions from dilute aqueous solutions. Adsorption characteristics of the resins towards Cu(II) and Ni(II) were studied spectrophotometrically both in competitive and noncompetitive conditions. The effects of pH, contact time, quantity of the sorbent, concentration of the metal ions in a suitable buffer medium were studied. The resins were found to be selective for Cu(II) leading to its separation from a mixture of Cu(II) and Ni(II). © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 967–981, 2000     

Resin‐IV: Synthesis and characterization of terpolymers derived from 2‐hydroxyacetophenone,melamine, and formaldehyde

Terpolymer resins (2‐HAMF) were prepared by the condensation of 2‐hydroxyacetophenone and melamine with formaldehyde in the presence of acid catalyst and using varied molar ratios of reacting monomers. Compositions of terpolymers have been determined by elemental analysis. The number average molecular weights (Mn) have been determined by conductometric titration in nonaqueous medium. Viscometric measurements in dimethyl sulfoxide have been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, infrared and nuclear magnetic resonance spectra were studied to elucidate the structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and metal ion uptake studies of chelating resins derived from formaldehyde/furfuraldehyde condensed phenolic schiff base of 4,4′‐diaminodiphenylmethane and o‐hydroxyacetophenone

The synthesis, characterization, and metal ion uptake studies of two chelating resins with multiple functional groups are reported. The chelating resins were synthesized by condensing a phenolic Schiff base derived from 4,4′‐diaminodiphenylmethane and o‐hydroxyacetophenone with formaldehyde or furfuraldehyde. The resins readily absorbed transition metal ions, such as Cu²⁺ and Ni²⁺, from dilute aqueous solutions. The Schiff base, resins, and metal polychelates were characterized by various instrumental techniques, such as elemental‐analysis, ultraviolet–visible spectroscopy proton and carbon‐13 nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR, respectively), X‐ray diffraction (XRD), and thermogravimetric–differential thermogravimetric analyses (TG–DTG). The ¹H‐NMR and ¹³C‐NMR studies were used to determine the sites for aldehyde condensation with the phenolic moiety. Fourier transform infrared data provided evidence for metal–ligand bonding. Thermogravimetric analysis was employed to compare the relative thermal stabilities of the resins and the polychelates. The TG data were fitted into different models and subjected to computational analysis to calculate the kinetic parameters. The XRD data indicate that the incorporation of metal ion into the resin matrix significantly enhanced the degree of crystallinity of the material. The extent of metal‐ion loading into the resins was studied in competitive and noncompetitive conditions, varying the time of contact, metal ion concentrations, and pH of the reaction medium in a suitable buffer medium. The furfuraldehyde‐condensed resin was more effective in removing metal ions than the formaldehyde‐condensed resins. The resins were selective for Cu²⁺, resulting in separation of Cu²⁺ and Ni²⁺ from the mixture at pH 5.89. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 570–581, 2003     

Thermal degradation behaviors and flame retardancy of epoxy resins with novel silicon‐containing flame retardant

A novel macromolecular silicon‐containing intumescent flame retardants (Si‐IFR) was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus‐silicon characterized by IR. Epoxy resins (EP) were modified with Si‐IFR to get the flame retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). Twenty percentage of weight of Si‐IFR was doped into EP to get 27.5% of LOI and UL 94 V‐0. The degradation behavior of the flame retardant EP was studied by thermogravimetry, differential thermogravimetry, scanning electron microscopy, and X‐ray photoelectron spectroscopy analysis. The experimental results exhibited that when EP/Si‐IFR was heated, the phosphorus‐containing groups firstly decompose to hydrate the char source‐containing groups to form a continuous and protective carbonaceous char, which changed into heat‐resistant swollen char by gaseous products from the nitrogen‐containing groups. Meanwhile, SiO₂ reacts with phosphate to yield silicophosphate, which stabilizes the swollen char. The barrier properties and thermal stability of the swollen char are most effective in resisting the transport of heat and mass to improve the flame retardancy and thermal stability of EP. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Synthesis,characterization, and thermal degradation studies of copolymer resin derived from p-cresol,melamine, and formaldehyde

Copolymers (p-CMF) synthesized by the condensation of p-cresol and melamine with formaldehyde in the presence of an acid catalyst and using varied molar proportion of the reacting monomers. Copolymer resin compositions were determined on the basis of their elemental analysis. The number average molecular weight of these copolymers was determined by conductometric titration in nonaqueous media. Solution viscosity measurements in dimethyl sulfoxide (DMSO) were carried out to ascertain the characteristic functions and constants of the copolymer resins. The copolymer resins were further characterized byUV–visible absorption spectra in the nonaqueous medium, Infra-red (IR) spectra, and the nuclear magnetic resonance (NMR) spectra. Thermal studies of the resins were carried out to determine their mode of decomposition, the activation energy (E_a), order of reaction (n), frequency factor (Z), entropy change (ΔS), free energy change (ΔF), and apparent entropy change (S*). Thermal decomposition curves were discussed with careful attention of minute details. The Freeman-Carroll and Sharp-Wentworth methods have been used to calculate thermal activation energy and thermal stability. Thermal activation energy (E_a) calculated with these methods are in agreement with each other. The data from the Freeman-Carroll methods have been used to determine various thermodynamic parameters. The order of thermal stability of copolymers has been determined using TGA. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel aromatic polyamides derived from 2,2′‐bis(p‐phenoxyphenyl)‐4, 4′‐diaminodiphenyl ether

BACKGROUND: Wholly aromatic polyamides (aramids) are high‐performance polymeric materials with outstanding heat resistance and excellent chemical stabilities due to chain stiffness and intermolecular hydrogen bonding of amide groups. Synthesis of structurally well‐designed monomers is an effective strategy to prepare modified forms of these aramids to overcome lack of organo‐solubility and processability limitations. RESULTS: A novel class of wholly aromatic polyamides was prepared from a new diamine, namely 2,2′‐bis(p‐phenoxyphenyl)‐4,4′‐diaminodiphenyl ether (PPAPE), and two simple aromatic dicarboxylic acids. Two reference polyamides were also prepared by reacting 4,4′‐diaminodiphenyl ether with the same comonomers under similar conditions. M?_w and M?_n of the resultant polymers were 8.0 × 10⁴ and 5.5 × 10⁴ g mol^?1, respectively. Polymers resulting from PPAPE exhibited a nearly amorphous nature. These polyamides exhibited excellent organo‐solubility in a variety of polar solvents and possessed glass transition temperatures up to 200 °C. The 10% weight loss temperatures of these polymers were found to be up to 500 °C under a nitrogen atmosphere. The polymers obtained from PPAPE could be cast into transparent and flexible films from N,N‐dimethylacetamide solution. CONCLUSION: The results obtained show that the new PPAPE diamine can be considered as a good monomer to enhance the processability of its resultant aromatic polyamides while maintaining their high thermal stability. The observed characteristics of the polyamides obtained make them promising high‐performance polymeric materials. Copyright © 2009 Society of Chemical Industry     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999