Effect of clay modification on the morphological,mechanical, and thermal properties of polyamide 6/polypropylene/montmorillonite nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic montmorillonite (OMMT) were prepared by melt compounding. The sodium montmorillonite (Na‐MMT) was modified using three different types of alkyl ammonium salts, namely dodecylamine, 12‐aminolauric acid, and stearylamine. The effect of clay modification on the morphological and mechanical properties of PA6/PP nanocomposites was investigated using x‐ray diffraction (XRD), transmission electron microscopy (TEM), tensile, flexural, and impact tests. The thermal properties of PA6/PP nanocomposites were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and heat distortion temperature (HDT). XRD and TEM results indicated the formation of exfoliated structure for the PA6/PP nanocomposites prepared using stearylamine modified montmorillonite. On the other hand, a mixture of intercalated and exfoliated structures was found for the PA6/PP nanocomposites prepared using 12‐aminolauric acid and dodecylamine modified montmorillonite. Incorporation of OMMT increased the stiffness but decreased the ductility and toughness of PA6/PP blend. The PA6/PP nanocomposite containing stearylamine modified montmorillonite showed the highest tensile, flexural, and thermal properties among all nanocomposites. This could be attributed to better exfoliated structure in the PA6/PP nanocomposite containing stearylamine modified montmorillonite. The storage modulus and HDT of PA6/PP blend were increased significantly with the incorporation of both Na‐MMT and OMMT. The highest value in both storage modulus and HDT was found in the PA6/PP nanocomposite containing stearylamine modified montmorillonite due to its better exfoliated structure. POLYM. COMPOS., 31:1156–1167, 2010. © 2009 Society of Plastics Engineers     

Polymorphism in polyamide 66/clay nanocomposites

Polyamide 66/clay nanocomposites (PA66CN) were prepared via melt compounding method by using a new kind of organophilic clay, which was obtained through co-intercalation of epoxy resin and quaternary ammonium into Na-montmorillonite. The silicate layers were dispersed homogeneously and nearly exfoliated in polyamide 66 (PA66) matrix. The introduction of silicate layers induced the appearance of the γ phase in PA66CN at room temperature, more clay loadings would amplify this phenomenon; the addition of clay also changed the structure of the α crystalline phase. The presence of silicate layers increased the crystallization rate and had a strong hetero phase nucleation effect on PA66 matrix. The lower Brill transition temperature of PA66CN can be attributed to the strong interaction between polyamide chains and surfaces of silicate layers.     

Morphology,thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy‐modified organoclay

A new kind of organophilic clay, cotreated by methyl tallow bis‐2‐hydroxyethyl quaternary ammonium and epoxy resin into sodium montmorillonite (to form a strong interaction with polyamide 66 matrix), was prepared and used in preparing PA66/clay nanocomposites (PA66CN) via melt‐compounding method. Three different types of organic clays, CL30B–E00, CL30B–E12, and CL30B–E23, were used to study the effect of epoxy resin in PA66CN. The morphological, mechanical, and thermal properties have been studied using X‐ray diffraction, transmission electron microscopy (TEM), mechanical, and thermal analysis, respectively. TEM analysis of the nanocomposites shows that most of the silicate layers were exfoliated to individual layers and to some thin stacks containing a few layers. PA66CX–E00 and PA66CX–E12 had nearly exfoliated structures in agreement with the SAXS results, while PA66CX–E23 shows a coexistence of intercalated and exfoliated structures. The storage modulus of PA66 nanocomposites was higher than that of the neat PA66 in the whole range of tested temperature. On the other hand, the magnitude of the loss tangent peak in α‐ or β‐transition region decreased gradually with the increase in the clay loading. Multiple melting behavior in PA66 was also observed. Thermal stability more or less decreased with an increasing inorganic content. Young's modulus and tensile strength were enhanced by introducing organoclay. Among the three types of nanocomposites prepared, PA66CX–E12 showed the highest improvement in properties, while PA66CX–E23 showed properties inferior to that of PA66CX–E00 without epoxy resin. In conclusion, an optimum amount of epoxy resin is required to form the strong interaction with the amide group of PA66. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1711–1722, 2006     

Effect of clay addition on the morphology and thermal behavior of polyamide 6

The nanostructure, morphology, and thermal properties of polyamide 6 (PA6)/clay nanocomposites were studied with X‐ray scattering, differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The wide‐angle X‐ray diffraction (WAXD) and TEM results indicate that the nanoclay platelets were exfoliated throughout the PA6 matrix. The crystallization behavior of PA6 was significantly influenced by the addition of clay to the polymer matrix. A clay‐induced crystal transformation from the α phase to the γ phase for PA6 was confirmed by WAXD and DSC; that is, the formation of γ‐form crystals was strongly enhanced by the presence of clay. With various clay concentrations, the degree of crystallinity and crystalline morphology (e.g., spherulite size, lamellar thickness, and long period) of PA6 and the nanocomposites changed dramatically, as evidenced by TEM and small‐angle X‐ray scattering results. The thermal behavior of the nanocomposites was investigated with DSC and compared with that of neat PA6. The possible origins of a new clay‐induced endothermic peak at high temperature are discussed, and a model is proposed to explain the complex melting behavior of the PA6/clay nanocomposites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1191–1199, 2007     

A processing-induced clay dispersion and its effect on the structure and properties of polyamide 6

The nanostructures and morphologies of polyamide 6 (PA6)/organoclay nanocomposites prepared by melt compounding have been studied by using X-ray diffraction (XRD) and transmission electron microscopy (TEM). A combination of XRD and TEM indicates that an exfoliated clay morphology dominates at low clay loadings (≤5 wt%) and a mixture of intercalated and exfoliated structures exists at high clay concentrations. It is worth noting, however, that optical microscopy (OM) even shows the presence of large clay agglomerates in samples with higher clay contents. OM images further present an overview of an uneven clay distribution due to the effect of injection molding. The crystalline structure of PA6 is greatly affected by this unevenness in the processing-induced clay dispersion, as evidenced by differential scanning calorimetry (DSC). The thermal dynamic and mechanical properties of PA6 and the nanocomposites have been investigated as a function of clay concentration. The tensile tests show that the degree of dispersion of the nanoclay within the polymer matrix plays a vital role in property improvement. Copyright © 2004 Society of Chemical Industry     

Polyamide 6/clay nanocomposites using a cointercalation organophilic clay via melt compounding

Polyamide 6/clay nanocomposites (PA6CN) were prepared via the melt compounding method by using a new kind of organophilic clay, which was obtained through cointercalation of epoxy resin and quaternary ammonium into Na‐montmorillonite. The dispersion effect of this kind of organophilic clay in the matrix was studied by means of X‐ray diffraction (XRD) and transmission electron microscopy (TEM); the silicate layers were dispersed homogeneously and nearly exfoliated in the matrix. This was probably the result of the strong interaction between epoxy groups and amide end groups of PA6. The mechanical properties and heat distortion temperature (HDT) of PA6CN increased dramatically. The notched Izod impact strength of PA6CN was 80% higher than that of PA6 when the clay loading was 5 wt %. Even at 10 wt % clay content, the impact strength was still higher than that of PA6. The finely dispersed silicate layers and the strong interaction between silicate layers and matrix decreased the water absorption. At 10 wt % clay content, PA6CN only absorbs half the amount of water compared with PA6. The dynamic mechanical properties of PA6CN were also studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 953–958, 2003     

Gasoline permeation behavior and mechanical properties of polyamide 6/nanoclay,polyamide 6/PE‐g‐maleic anhydride blend,and polyamide 6/PE‐g‐maleic anhydride/clay nanocomposite

In this article, polyamide 6 (PA6)/clay nanocomposites, PA6/polyethylene grafted maleic anhydride (PE‐g‐MA) blends, and PA6/PE‐g‐MA/clay nanocomposites were prepared and their gasoline permeation behavior and some mechanical properties were investigated. In PA6/clay nanocomposites, cloisite 30B was used as nanoparticles, with weight percentages of 1, 3, and 5. The blends of PA6/PE‐g‐MA were prepared with PE‐g‐MA weight percents of 10, 20, and 30. All samples were prepared via melt mixing technique using a twin screw extruder. The results showed that the lowest gasoline permeation occurred when using 3 wt % of nanoclay in PA6/clay nanocomposites, and 10 wt % of PE‐g‐MA in PA6/PE‐g‐MA blends. Therefore, a sample of PA6/PE‐g‐MA/clay nanocomposite containing 3 wt % of nanoclay and 10 wt % of PE‐g‐MA was prepared and its gasoline permeation behavior was investigated. The results showed that the permeation amount of PA6/PE‐g‐MA/nanoclay was 0.41 g m^?2 day^?1, while this value was 0.46 g m^?2 day^?1 for both of PA6/3wt % clay nanocomposite and PA6/10 wt % PE‐g‐MA blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40150.     

Morphology evolutions of organically modified montmorillonite/polyamide 12 nanocomposites

Organically modified montmorillonites (OMMTs) by octadecylammonium chloride with two adsorption levels were dispersed in polyamide 12 (PA12) matrices with two molecular weights for different melt mixing times in order to investigate morphology evolutions and factors influencing fabrication of PA12 nanocomposites. Different adsorption levels of the modifier in the OMMTs provide different environments for diffusion of polymer chains and different attractions between MMT layers. Wide-angle X-ray diffraction (WAXD), transmission electron microscope (TEM) and gas permeability were used to characterize morphologies of the nanocomposites. Both OMMTs can be exfoliated in the PA12 matrix with higher molecular weight, but only OMMT with lower adsorption level can be exfoliated in the PA12 matrix with lower molecular weight. It was attributed to the differences in the levels of shear stress and molecular diffusion in the nanocomposites. The exfoliation of OMMT platelets results from a combination of molecular diffusion and shear. After intercalation of PA12 into interlayer of OMMT in the initial period of mixing, further dispersion of OMMTs in PA12 matrices is controlled by a slippage process of MMT layers during fabricating PA12 nanocomposites with exfoliated structure.     

Interfacial interactions and performance of polyamide 6/modified attapulgite clay nanocomposites

Attapulgite (AT) clay was firstly treated with sodium polyacrylate (PAS), then polyamide 6 (PA6)/AT nanocomposites were prepared by simple melt compounding. Transmission electron microscope (TEM) and Fourier transform infrared spectrometry (FT‐IR) of treated AT confirm the success of purifying and surface modification of the original AT by PAS. X‐ray diffraction spectra for the nanocomposites show that the microstructure of AT in PA6 matrix is almost unchanged. It indicates that a strong interfacial adhesion exists between AT and PA6 matrix through analyzing fracture surfaces of the nanocomposites, the variation of glass transition temperature (T_g) obtained by dynamic mechanical analysis, and interfacial interaction factors; field emission scanning electron microscopy on the fracture surfaces of the nanocomposites shows that a uniform dispersion of AT is obtained. The above two aspects conform to the improvement of mechanical and thermal properties of the nanocomposites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

The effect of clay on the thermal degradation of polyamide 6 in polyamide 6/clay nanocomposites

The degradation pathway of polyamide 6/clay nanocomposites was studied as a function of clay content. Well-dispersed polymer-clay nanocomposites can be easily obtained by simple melt blending between organically-modified clays and polyamide 6. Polyamide 6-clay nanocomposites exhibit a large reduction in the peak heat release rate, 60%, measured by cone calorimetry. There are no significant differences in the evolved products during thermal degradation of polyamide 6 and polyamide 6/clay nanocomposites in terms of composition and functionality. The main degradation pathway of polyamide 6 is aminolysis and/or acidolysis, primarily through an intra-chain reaction, producing ε-carprolactam, which is the monomer of polyamide 6. As the clay loading is increased, the relative quantity of ε-carprolactam in the evolved products decreases and the viscosity of the soluble solid residues increases. It is thought that inter-chain reactions become significant in the presence of clay because the degrading polymer chains are trapped in the gallery space of the clay during thermal degradation.     

Microstructure,crystallization and dynamic mechanical properties of polyamide/clay nanocomposites after melt‐state annealing

Polyamide 6/clay (PA/clay) nanocomposites produced by melt‐compounding were treated under various melt‐state annealing processes. The effect of melt‐state annealing on the microstructure, crystallization, and dynamic mechanical properties was characterized by transmission electron microscope (TEM), modulated differential scanning calorimetry (MDSC), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and dynamic mechanical analysis (DMA). Clay layers were exfoliated in PA matrix. The crystalline transformation between α and γ‐crystalline phase was virtually dependent on the annealing process and clay loading. After melt‐state annealing between 230 and 250°C, clay induced the appearance of a new endothermic peak in PA/clay. PA/clay after melt‐state annealing exhibited a higher elastic modulus above T_g and a lower β relaxation below T_g as compared with the non‐annealed sample. FTIR analysis demonstrated that the melt‐state annealing caused strong hydrogen bonding interaction of amide groups with clay layers. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis of exfoliated polyamide 6,6/organically modified montmorillonite nanocomposites by in situ interfacial polymerization

Polyamide 6,6 (PA 6,6)/organically modified montmorillonite (OMMT) nanocomposites were prepared by a novel method, using direct interfacial polymerization of an aqueous hexamethylene diamine and a nonaqueous adipoyl chloride in dichloromethane solution containing different amounts of OMMT dispersed nanoparticles. The state of dispersion of OMMT in the PA 6,6 matrix was investigated by means of X‐ray diffraction, as well as transmission electronic microscopy. The results indicated that the OMMT nanoparticles were dispersed homogeneously and nearly exfoliated in the PA 6,6 matrix. The random arrangement of clay platelets in the PA 6,6 matrix, exfoliation, and intercalation of clays between the PA 6,6 matrix were distinguished. The amount of the incorporated OMMT in the PA 6,6 matrix was determined by means of TGA technique. Furthermore it was found that addition of a small amount of OMMT dramatically improved the thermal stability of PA 6,6. The TGA thermograms of all the synthesized nanocomposite samples showed an interesting unexpected lag in the weight loss at high temperatures, which could be another evidence for formation of fully exfoliated nanocomposites structures, with improved thermal stability. Nucleating effect of the OMMT nanoparticles and their influence on crystallization behavior of PA 6,6 was confirmed by DSC. Finally it is concluded that the in situ interfacial polycondensation is a suitable method for synthesis of nanocomposites with well dispersed structures and enhanced properties. POLYM. COMPOS., 28:733–738, 2007. © 2007 Society of Plastics Engineers     

Effect of clay on the morphology of blends of poly(propylene) and polyamide 6/clay nanocomposites

PP/NPA6 blends composed of poly(propylene) (PP) and polyamide 6/clay nanocomposites (NPA6) were prepared by twin‐screw extrusion and melt‐drawn into ribbons by a ribbon extrusion process. The influence of clay on the morphology of PP/NPA6 ribbons was investigated by means of field‐emission scanning electron microscopy and optical microscopy. The results show that at low clay content (3, 5 wt%), NPA6 exhibited continuous lamellar structure in PP as pristine PA6 did in a PP/PA6 blend, but at a higher clay content (10 wt%) only ellipsoids or elongated ellipsoids were observed. In order to explain the morphological difference, two factors, ie the compatibilization effect and melt rheology, have been taken into consideration. It has been found that both factors, and probably mainly the variation in melt rheology, were responsible for the morphological difference in the PP/NPA6 blends with different clay contents under the extensional flow field. Copyright © 2004 Society of Chemical Industry     

Effects of swelling agents on the crystallization behavior and mechanical properties of polyamide 6/clay nanocomposites

Montomorillonite was organically modified with three different swelling agents: n‐dodecylamine, 12‐aminolauric acid, and 1,12‐diaminodecane. These organoclays and polyamide 6 (PA6) were blended in a formic acid solution. X‐ray diffraction analysis showed that the clay still retained its layer structure in the PA6/clay nanocomposite. Consequently, these materials were intercalated nanocomposites. The effects of the swelling agent and organoclay content on the crystallization behavior of the PA6/clay nanocomposites were studied with differential scanning calorimetry. The results showed that the position and width of the exothermic peak of the PA6/clay nanocomposites were changed during the nonisothermal crystallization process. The clay behaved as a nucleating agent and enhanced the crystallization rate of PA6.The crystallinity of PA6 decreased with an increasing clay content. Different swelling agents also affected the crystallization behavior of PA6. The effects of the type and content of the swelling agent on the tensile and flexural properties of PA6/clay nanocomposites were also investigated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1686–1693, 2003     

Free volume sizes in intercalated polyamide 6/clay nanocomposites

The effect of incorporating modified clay into a polyamide 6 (PA6) matrix, on the free volume cavity sizes and the thermal and viscoelastic properties of the resulting nanocomposite, was studied with positron annihilation lifetime spectroscopy, differential scanning calorimetry and dynamic mechanical analysis. At low concentrations of clay the fraction of PA6 crystals melting close to 212 °C was increased, while the fraction of the α-form PA6 crystals, melting close to 222 °C, was reduced. At higher concentrations of clay, a crystal phase with increased thermal stability emerged. Addition of more than 19 wt% clay caused a reduction of the heat of fusion of PA6. An unexpected reduction of the ΔC_p at the glass transition, contradicting the measured reduction of the heat of fusion, was detected, indicating an altered mobility in the non-crystalline regions. The viscoelastic response of PA6/clay nanocomposites, as compared to unfilled PA6, pointed towards a changed mobility in the non-crystalline regions. At high concentrations of clay (>19 wt%) an increase of the free volume cavity diameter was observed, indicating a lower chain packing efficiency in the PA6/clay nanocomposites. The increased free volume sizes were present both above and below the glass transition temperature of PA6.     

Manipulating the phase morphology in PPS/PA66 blends using clay

By adding a small amount of clay into poly(p‐phenylene sulfide) (PPS)/polyamide 66 blends, the morphology was found to change gradually from sea–island into cocontinuity and lamellar supramolecular structure, as increasing of clay content. Clay was selectively located in the PA66 phase, and the exfoliated clay layers formed an edge‐contacted network. The change of morphology is not caused by the change of volume ratio and viscosity ratio but can be well explained by the dynamic interplay of phase separation between PPS and PA66 through preferential adsorption of PA66 onto the clay layers and through layer–layer repulsion. This provides a means of manipulating the phase morphology for the immiscible polymer blends. The mechanical and tribological properties of PPS/PA66 blends with different phase morphologies (different clay contents) were studied. Both tensile and impact strength of the blends were found obviously increased by the addition of clay. The antiwear property was greatly improved for the blends with cocontinuous phase form. Our work indicates that the phase‐separating behavior of polymer blends contained interacting clay can be exploited to create a rich diversity of new structures and useful nanocomposites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Deformation and fracture behavior of polyamide nanocomposites: The effect of clay dispersion

This study describes the effect of the clay content and its dispersion on deformation and fracture behavior of polyamide nanocomposites. Two nanocomposite systems, intercalated and exfoliated nanocomposites containing layered silicate, were compared. They were prepared by melt‐compounding of polyamide with sodium montmorillonite or organophilized montmorillonite. It has been shown that while the exfoliated structure imparts to the nanocomposite higher stiffness and strength, the toughness is inferior to the intercalated nanocomposite. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potential in situ preparation of aliphatic polyamide‐based nanocomposites: The organoclay‐polyamide salt interaction

In situ intercalative polycondensation is applied for the preparation of polyamide (PA) n,6–clay nanocomposites, namely poly(ethylene adipamide) (PA 2,6), poly(hexamethylene adipamide) (PA 6,6), and poly(dodecamethylene adipamide) (PA 12,6). For this purpose, two different polymerization routes are considered; a low‐temperature melt polymerization technique and the conventional solution‐melt one. Under the specific experimental conditions, lack of clay exfoliation is detected through XRD measurements, which is proved irreversible even when twin‐screw extrusion is attempted as an additional step. The resulting PA n,6–clay structures are found dependent on the diamine moiety length; more specifically, an intrinsic interaction between the polyamide monomer and the organoclay surfactant is indicated. An ion exchange occurs between the two competitive species, that is, diamine and surfactant cations, leading to flocculated clay structures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Montmorillonite disperses in amorphous phase of RIM PA6 matrix via anionic ring opening polymerisation

The reaction injection moulding process was employed to prepare montmorillonite (O-MMT)/polyamide 6 (PA6) nanocomposites. O-MMT was functionalised by aminosilane in order to improve the compatibility and decrease the viscosity of caprolactam melts, which swell O-MMT. Small angle X-ray diffraction and transmission electron microscopy results demonstrated that PA6 was sufficiently polymerised via in situ anionic ring opening route at the interlayer of the premodified O-MMT that yields a disordered exfoliated structure. Wide angle X-ray diffraction, polarising optical microscopy and differential scanning calorimetry analysis indicated that the crystallinity of nanocomposites decreased as the loading of O-MMT increased. O-MMT can induce γ-phase crystals and eliminate perfect α-phase crystals into smaller imperfect crystals. The O-MMT primarily disperses in the amorphous phase of RIM PA6 matrix that improves the mechanical properties and heat distortion temperature (HDT) of nanocomposites. For the nanocomposite at 5 wt-% O-MMT, the HDT of neat RIM PA6 was improved from 78 to 163°C.     

Localization of different types of organoclay montmorillonite in the compatibilized polyamide 6/carboxylated acrylonitrile butadiene rubber nanocomposites: Morphology and rheological properties

In this study, nanocomposites based on polyamide 6/carboxylated acrylonitrile butadiene rubber (PA6/XNBR) reinforced by the clay montmorillonite (OMMT) (Cloisite 20A and Cloisite 30B) were prepared by melt mixing. Glycidyl methacrylate-grafted XNBR (XNBR-g-GMA) compatibilizer was used for immiscible blends of PA6/XNBR. The results illustrated that OMMT wanted to be selectively present in the more hydrophilic PA6 phase. Also, by adding the XNBR-g-GMA compatibilizer and increasing OMMT content, tensile strength, rheological and dynamic mechanical properties of the nanocomposites improved. According to transmission electron microscopy (TEM) images, a few layers of OMMT (Cloisite 20A) in the XNBR-g-GMA compatibilizer phase was observed. The results of X-ray diffractometry and TEM analyses demonstrated that the formation of intercalated or exfoliated structures for both types of OMMT nanocomposites. In end of all analysis was found PA6/XNBR reinforced by the Cloisite 30B could be substantially improved by adding XNBR-g-GMA as a compatibilizer when compared to those reinforced by Cloisite 20A.