Poly(aspartic‐acid) derivatives as polymeric micelle drug delivery systems

A novel amphiphilic biodegradable graft copolymer based on poly(aspartic acid) (PASP) was prepared by coupling monomethoxy poly(ethylene glycol) as the hydrophilic segment with PASP‐g‐octadecyl (PASP‐g‐OD) as the hydrophobic backbone. The critical micelle concentration of the copolymer was obtained by measuring the conductivity and fluorescence spectroscopy. Polymeric micelles were prepared with the solvent evaporation method, and the size distribution and morphology of the polymeric micelles were characterized by dynamic light scattering and transmission electron microscopy. The ability of the PASP derivatives to solubilize hydrophobic drugs was investigated using methotrexate (MTX), oleanolic acid, and podophyllotoxin (PODO) as models. The results demonstrated that drug solubility depends on the copolymer concentration, copolymer composition, as well as the physicochemical property of the drug. A stability study performed with PODO loaded by polymeric micelle solution demonstrated that the micelle carrier could protect the drug from being destroyed in a pH 7.4 buffer solution; however, the micelle did not protect it in a pH 9.5 buffer solution. Pharmacokinetic studies were carried out by intravenous administration of MTX loaded by polymeric micelle solution and MTX solution. The results demonstrated that the polymeric micelle prolonged the drug permanence in blood circulation with a mean residence time of about 2.37 times and increased the systemic bioavailability with the area under the drug concentration–time curve by about 2.34 times. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2871–2878, 2006     

Micelles formed by self‐assembly of hyperbranched poly[(amine‐ester)‐co‐(D,L‐lactide)] (HPAE‐co‐PLA) copolymers for protein drug delivery

BACKGROUND: The aim of the work presented was to synthesize a series of amphiphilic hyperbranched poly[(amine‐ester)‐co‐(D ,L ‐lactide)] (HPAE‐co‐PLA) copolymers and study the formation of copolymeric micelles. These copolymeric micelle systems are expected to be potential candidates for applications in protein drug delivery. RESULTS: The chemical structures of the copolymers were confirmed by Fourier transform infrared spectroscopy, ¹³C NMR and thermogravimetric analysis. Fluorescence spectroscopy and dynamic light scattering confirmed the formation of copolymeric micelles of the HPAE‐co‐PLA copolymers. The maintenance of stability of bovine serum albumin (BSA) during release from micelles in vitro was also measured using circular dichroism and fluorescence spectrometry. CONCLUSION: Novel hyperbranched HPAE‐co‐PLA copolymers have been synthesized. Conjugation of PLA to HPAE was proved to be an available method for the preparation of micelles for protein delivery. The BSA‐loaded micelles showed enhanced encapsulation efficiency and the structural stability of BSA was retained during the release process. The hyperbranched polymeric micelles could be useful as drug carriers for protein drug delivery systems. Copyright © 2008 Society of Chemical Industry     

Thermoresponsive poly(ϵ‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) graft copolymers prepared by a combination of ring‐opening polymerization and sequential azide–alkyne click chemistry

A straightforward strategy is described to synthesize poly(?‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) (PCL‐g‐PNIPAAm) amphiphilic graft copolymers consisting of potentially biodegradable polyester backbones and thermoresponsive grafting chains. PCL with pendent chlorides was prepared by ring‐opening polymerization, followed by conversion of the pendent chlorides to azides. Alkyne‐terminated PNIPAAm was synthesized by atom transfer radial polymerization. Then, the alkyne end‐functionalized PNIPAAm was grafted onto the PCL backbone by a copper‐catalyzed azide–alkyne cycloaddition. PCL‐g‐PNIPAAm graft copolymers self‐assembled into spherical micelles comprised of PCL cores and PNIPAAm coronas. The critical micelle concentrations of the graft copolymers were in the range 7.8–18.2 mg L^?1, depending on copolymer composition. Mean hydrodynamic diameters of micelles were in the range 65–135 nm, which increased as the length of grafting chains grew. PCL‐g‐PNIPAAm micelles were thermosensitive and aggregated upon heating. © 2014 Society of Chemical Industry     

Synthesis of amphiphilic temperature‐sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers and micellar characterization

Amphiphilic thermally sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers were synthesized by ring‐opening polymerization of tetramethylene carbonate with hydroxyl‐terminated poly(N‐isopropylacrylamide) (PNiPAAm) as macro‐initiator in the presence of stannous octoate as catalyst. The synthesis involved PNiPAAm bearing a single terminal hydroxyl group prepared by telomerization using 2‐hydroxyethanethiol as a chain‐transfer agent. The copolymers were characterized using ¹H NMR and Fourier transform infrared spectroscopy and gel permeation chromatography. Their solutions show reversible changes in optical properties: transparent below the lower critical solution temperature (LCST) and opaque above the LCST. The LCST depends on the polymer composition and the media. Owing to their amphiphilic characteristics, the block copolymers form micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range 1.11–22.9 mg L^?1. Increasing the hydrophobic segment length or decreasing the hydrophilic segment length in the amphiphilic diblock copolymers produces lower CMCs. A core‐shell structure of the micelles is evident from ¹H NMR analyses of the micelles in D₂O. Transmission electron microscopic analyses of micelle morphology show a spherical structure of both blank and drug‐loaded micelles. The blank and drug‐loaded micelles have an average size of less than 130 nm. Observations show high drug‐entrapment efficiency and drug‐loading content for the drug‐loaded micelles. Copyright © 2010 Society of Chemical Industry     

Synthesis of amphiphilic pseudopolyamino acid‐containing ABC‐triblock copolymers and micellar characterizations

This study describes the synthesis of amphiphilic ABC‐triblock copolymers comprising a central pseudopoly(4‐hydroxy‐L ‐proline) segment and terminal hydrophilic poly(ethylene glycol)methyl ether as well as hydrophobic poly(ε‐caprolactone) blocks. Differential scanning calorimetry, ¹H‐NMR spectroscopy, and gel permeation chromatography are used to characterize the copolymers. The thermal properties (T_g and T_ms) of the triblock copolymers depend on the composition of polymers. Larger amounts of ε‐CL incorporated into the macromolecular backbone increased T_g and T_ms. Fluorescence spectroscopy, transmission electron microscopy, and dynamic light scattering are utilized to investigate their micellar characteristics in the aqueous phase. Observations showed a higher critical micelle concentration with higher hydrophilic components in the copolymers. The micelle exhibited a core‐shell‐corona and/or vesicle shape, and the average size was less than 300 nm. Drug entrapment efficiency and drug loading of micelles depending on the composition of block polymers are also described. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and self‐assembly behavior of pH‐responsive amphiphilic copolymers containing ketal functional groups

Polymeric micelles that are responsive to pH are particularly attractive for application in drug delivery systems. In this study, one type of amphiphilic block copolymers with hydrophobic building blocks bearing pH‐sensitive ketal groups was designed. In an acidic environment, the polarity transfer from amphiphile to double hydrophile for this copolymer destroyed the driving force of micelle formation, which triggered the release of encapsulated hydrophobic molecules. The amphiphilic block copolymers monomethoxy‐poly(ethylene glycol)‐block‐poly(2,2‐dimethyl‐1,3‐dioxolane‐4‐yl)methyl acrylate (MPEG‐block‐PDMDMA) was fabricated by atom transfer radical polymerization using MPEG‐Br as macroinitiator. The critical micelle concentration of various compositions of this copolymer in aqueous solution ranged from 4.0 to 10.0 mg L^?1, and the partition equilibrium constant (K_v) of pyrene in micellar solutions of the copolymers varied from 1.61 × 10⁵ to 4.86 × 10⁵. Their overall effective hydrodynamic diameters from dynamic light scattering measurements were between 80 and 400 nm, and the micellar morphology showed spherical geometry as investigated using transmission electron microscopy. At pH = 1.0, all of these polymeric micelles presented 100% payload release in 24 h of incubation, while at pH = 3.0, nearly 70 and 25% of pyrene was released for MPEG‐block‐PDMDMA (44/18) and MPEG‐block‐PDMDMA (44/25) in 260 h, respectively. The pH‐responsive MPEG‐block‐PDMDMA polymeric micelles having good encapsulation efficiency for hydrophobic drugs are potential candidates for biomedical and drug delivery applications. Copyright © 2010 Society of Chemical Industry     

Self‐assembly and drug delivery behaviors of thermo‐sensitive poly(t‐butyl acrylate)‐b‐poly(N‐isopropylacrylamide) micelles

Self‐assembly of thermo‐sensitive poly (t‐butyl acrylate)‐b‐poly(N‐isopropylacrylamide) (PtBA‐ b‐PNIPAM) micelles in aqueous medium and its applications in controlled release of hydrophobic drugs were described. PtBA‐b‐PNIPAM was synthesized by atom transfer radical polymerization and aggregated into thermo‐sensitive core‐shell micelles with regular spheres in water, which was confirmed by ¹H‐NMR, fluorescence spectroscopy, transmission electron microscopic (TEM), and UV–vis spectroscopic techniques. The critical micelle concentration of micelles decreased with the increase of the hydrophobic components. The anti‐inflammation drug naproxen (NAP) was loaded as the model drug into polymeric micelles, which showed a dramatic thermo‐sensitive fast/slow switching behavior around the lower critical solution temperature (LCST). When the temperature was enhanced above LCST, release of NAP from core‐shell micelles was accelerated ascribed to the temperature‐induced deformation of micelles. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and micellization behavior of amphiphilic graft copolymer with 1‐octene as hydrophobic moiety

Two new kinds of amphiphilic copolymers were synthesized in this work. Poly(1‐octene‐co‐acrylic acid) copolymers were prepared through the copolymerization of 1‐octene and tert‐butyl acrylate, and the hydrolysis of tert‐butyl acrylate units. Poly(1‐octene‐co‐acrylic acid)‐g‐poly (ethylene glycol) copolymers were obtained from the esterification reaction between poly(1‐octene‐co‐acrylic acid) and poly(ethylene glycol) monomethyl ether. They were characterized by means of ¹H‐NMR, ¹³C‐NMR, GPC, and FTIR. These amphiphilic copolymers can form stable micelles in aqueous solutions. The critical micelle concentration was determined by fluorescence spectroscopy. The micellar morphology and size distribution were investigated by transmission electron microscopy and dynamic light scattering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(methyl methacrylate)/poly(ethylene glycol)/poly(ethylene glycol dimethacrylate) micelles: Preparation,characterization, and application as doxorubicin carriers

A crosslinked amphiphilic copolymer [poly(ethylene glycol) (PEG)–poly(methyl methacrylate) (PMMA)–ethylene glycol dimethacrylate (EGDM)] composed of PMMA, PEG, and crosslinking units (EGDM) was synthesized by atom transfer radical polymerization to develop micelles as carriers for hydrophobic drugs. By adjusting the molar ratio of methyl methacrylate and EGDM, three block copolymer samples (P0, P1, and P2) were prepared. The measurement of gel permeation chromatography and ¹H‐NMR indicated the formation of crosslinked structures for P1 and P2. Fluorescence spectroscopy measurement indicated that PEG–PMMA–EGDM could self‐assemble to form micelles, and the critical micelle concentration values of the crosslinked polymer were lower than those of linear ones. The prepared PEG–PMMA–EGDM micelles were used to load doxorubicin (DOX). The drug‐loading efficiencies of P1 and P2 were higher than that of P0 because the crosslinking units enhanced the micelles' stability. With increasing drug‐loading contents, DOX release from the micelles in vitro was decreased, and in the crosslinked formulations, the release rate was also slower. An in vitro release study indicated that DOX release from the micelles for the linear samples was faster than that for crosslinked micelles. The drug feeding amount increased and resulted in an increase in the drug‐loading content, and the loading efficiency decreased. These PEG–PMMA–EGDM micelles did not show toxicity in vitro and could reduce the cytotoxicity of DOX in the micelles; this suggested that they are good candidates as stable drug carriers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39623.     

pH‐responsive core crosslinked polycarbonate micelles via thiol‐acrylate Michael addition reaction

A facile method for the construction of pH‐responsive core crosslinked micelles (CCLMs) based on polycarbonate was developed. Biodegradable amphiphilic block copolymer monomethoxy poly(ethylene glycol)‐b‐Poly(AC) (mPEG‐b‐poly(AC)) with pendant acrylate group was synthesized by means of ring opening polymerization of acryloyl carbonate (AC). Then CCLMs were obtained via thiol‐acrylate Michael addition reaction between the pendant acrylate group in the hydrophobic block and the crosslinker 1,6‐hexanedithiol. DLS results showed that the CCLMs prepared from mPEG‐b‐poly(AC)₂₅ were more stable than uncrosslinked micelles (UCLMs) upon dilution by 10‐fold DMF. Model drug Coumarin 102 was then encapsulated into the micelles. The pH‐responsive release of coumarin 102 from the CCLMs was demonstrated by fluorescence spectroscopy. The core crosslinked polycarbonate micelles have a potential as efficient intracellular smart drug delivery platforms. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44421.     

TPE‐conjugated biomimetic and biodegradable polymeric micelle for AIE active cell imaging and cancer therapy

Smart nanocarrier for simultaneous drug delivery and cellular imaging is ideal for both cancer therapy and diagnosis. In this work, polymeric micelles based on the tetraphenylethene (TPE) conjugated poly(N6‐carbobenzyloxy‐l ‐lysine)‐block‐poly(2‐methacryloyloxyethyl phosphorylcholine) (TPE‐PLys‐b‐PMPC) copolymer are successfully prepared. Such biomimetic and biodegradable TPE‐PLys‐b‐PMPC micelles exhibit remarkable aggregation‐induced emission (AIE) feature and great biocompatibility, showing great potential for bioimaging application. In addition, anticancer drug doxorubicin (DOX) can be incorporated into the core of micelles and the intracellular release of DOX can be furthermore traced through the fluorescent imaging of these AIE micelles. As expected, this DOX‐loading polymeric micelle shows significant growth inhibition against HeLa cells and 4T1 cells and such TPE‐PLys‐b‐PMPC micelles would be a promising drug carrier for potential cancer therapy and bioimaging. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45651.     

Novel hyperbranched poly (amine-ester)-poly (lactide-co-glycolide) polymeric micelles as amphotericin B carriers

A series of amphiphilic hyperbranched poly (amine-ester)-poly (lactide-co-glycolide) (HPAE-co-PLGA) copolymers were synthesized by ring-opening polymerization of dl-lactide, glycolide and a fourth generation hyperbranched poly (amine-ester) (HPAE-OHs4) with Sn(Oct)₂ as catalyst. The chemical structure of copolymers was characterized by Fourier transform infrared (FT-IR), nuclear magnetic resonance (¹H-NMR, ¹³C-NMR), thermo gravimetric analysis apparatus (TGA), and different scanning calorimetry (DSC). Formation and characteristics of polymeric micelles of the amphiphilic copolymer were studied by environmental scanning electron microscopy (ESEM), fluorescence spectroscopy, and dynamic light scattering (DLS). In order to estimate the feasibility as novel drug carriers, a lipophilic model drug amphotericin B was incorporated into polymeric micelles and the drug release behavior was investigated. The micelle size and drug-loading content were found increased, and the drug-release rate decreased with the increase of molar ratio of dl-lactide/glycolide to HPAE.     

Vesicular and micellar self‐assembly of stimuli‐responsive poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) amphiphilic diblock copolymers

Dually responsive amphiphilic diblock copolymers consisting of hydrophilic poly(N‐isopropyl acrylamide) [poly(NIPAAm)] and hydrophobic poly(9‐anthracene methyl methacrylate) were synthesized by reversible addition fragmentation chain‐transfer (RAFT) polymerization with 3‐(benzyl sulfanyl thiocarbonyl sulfanyl) propionic acid as a chain‐transfer agent. In the first step, the poly(NIPAAm) chain was grown to make a macro‐RAFT agent, and in the second step, the chain was extended by hydrophobic 9‐anthryl methyl methacrylate to yield amphiphilic poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) block copolymers. The formation of copolymers with three different hydrophobic block lengths and a fixed hydrophilic block was confirmed from their molecular weights. The self‐assembly of these copolymers was studied through the determination of the lower critical solution temperature and critical micelle concentration of the copolymers in aqueous solution. The self‐assembled block copolymers displayed vesicular morphology in the case of the small hydrophobic chain, but the morphology gradually turned into a micellar type when the hydrophobic chain length was increased. The variations in the length and chemical composition of the blocks allowed the tuning of the block copolymer responsiveness toward both the pH and temperature. The resulting self‐assembled structures underwent thermally induced and pH‐induced morphological transitions from vesicles to micelles and vice versa in aqueous solution. These dually responsive amphiphilic diblock copolymers have potential applications in the encapsulation of both hydrophobic and hydrophilic drug molecules, as evidenced from the dye encapsulation studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46474.     

Synthesis and characterization of temperature‐sensitive block copolymers from poly(N‐isopropylacrylamide) and 4‐methyl‐ε‐caprolactone or 4‐phenyl‐ε‐caprolactone

This study synthesizes thermally sensitive block copolymers poly(N‐isopropylacrylamide)‐b‐poly(4‐methyl‐ε‐caprolactone) (PNIPA‐b‐PMCL) and poly(N‐isopropylacrylamide)‐b‐poly(4‐phenyl‐ε‐caprolactone) (PNIPA‐b‐PBCL) by ring‐opening polymerization of 4‐methyl‐ε‐caprolactone (MCL) or 4‐phenyl‐ε‐caprolactone (BCL) initiated from hydroxy‐terminated poly(N‐isopropylacrylamide) (PNIPA) as the macroinitiator in the presence of SnOct₂ as the catalyst. This research prepares a PNIPA bearing a single terminal hydroxyl group by telomerization using 2‐hydroxyethanethiol (ME) as a chain‐transfer agent. These copolymers are characterized by differential scanning calorimetry (DSC), ¹H‐NMR, FTIR, and gel permeation chromatography (GPC). The thermal properties (T_g) of diblock copolymers depend on polymer compositions. Incorporating larger amount of MCL or BCL into the macromolecular backbone decreases T_g. Their solutions show transparent below a lower critical solution temperature (LCST) and opaque above the LCST. LCST values for the PNIPA‐b‐PMCL aqueous solution were observed to shift to lower temperature than that for PNIPA homopolymers. This work investigates their micellar characteristics in the aqueous phase by fluorescence spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The block copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 0.29–2.74 mg L^?1, depending on polymer compositions, which dramatically affect micelle shape. Drug entrapment efficiency and drug loading content of micelles depend on block polymer compositions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of a novel amphiphilic poly (ethylene glycol)–poly (ε-caprolactone) graft copolymers

A series of amphiphilic graft copolymers PEO-g-PCL with different poly (ε-caprolactone) (PCL) molecular weight were successfully synthesized by a combination of anionic ring-opening polymerization (AROP) and coordination-insertion ring-opening polymerization. The linear PEO was produced by AROP of ethylene oxide (EO) and ethoxyethyl glycidyl ether initiated by 2-(2-methoxyethoxy) ethoxide potassium, and the hydroxyl groups on the backbone were deprotected after hydrolysis. The ring-opening polymerization of CL was initiated using the linear poly (ethylene oxide) (PEO) with hydroxyl group on repeated monomer as macroinitiator and Sn(Oct)₂ as catalyst, then amphiphilic graft copolymers PEO-g-PCL were obtained. By changing the ratio of monomer and macroinitiator, a series of PEO-g-PCL with well-defined structure, molecular weight control, and narrow molecular weight distribution were prepared. The expected intermediates and final products were confirmed by ¹H NMR and GPC analyzes. In addition, these amphiphilic graft copolymers could form spherical aggregates in aqueous solution by self-assemble, which were characterized by transmission electron microscopy, and the critical micelle concentration values of graft copolymers PEO-g-PCL were also examined in this article.     

Dual-sensitive and folate-conjugated mixed polymeric micelles for controlled and targeted drug delivery

For this study, we prepared a new type of drug carrier with the characteristics of stimuli-responsive transition and tumor-specific recognition through the co-assembly of two series of amphiphilic block copolymers, poly(ε-caprolactone)-b-poly[triethylene glycol methacrylate-co-N-methacryloyl caproic acid] and poly(ε-caprolactone)-b-poly[triethylene glycol methacrylate-co-N-(2-(methacrylamido)ethyl) folatic amide]. The pH-dependent thermal transition and the content of the targeting ligands of the mixed polymeric micelles are well correlated with the chemical structures and compositions of these two copolymers. Doxorubicin-loaded mixed polymeric micelles are stable at body temperature in the neutral condition for prolonged circulation in blood vessels, and demonstrated rapid drug release at acidic pH levels. The cumulative drug release profiles showed a relatively slow release at pH 7.4, and a quick release of 85% in 3 h at pH 5.3. The cytotoxicity tests against FA-positive (HeLa) and FA-negative (HT-29) tumor cell lines suggest that this mixed polymeric micelle system has potential merits as a controlled and targeted drug delivery system.     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Synthesis of amphiphilic graft copolymer with hydrophilic poly(acrylic acid) backbone and hydrophobic polystyrene side chains

A series of well-defined amphiphilic graft copolymers consisting hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains were synthesized by successive atom transfer radical polymerization (ATRP) followed by hydrolysis of poly(methoxymethyl acrylate) (PMOMA) backbone. Grafting-from strategy was employed for the synthesis of graft copolymers with narrow molecular weight distribution. Hydrophobic side chains were connected to the backbone through stable C-C bonds. The backbone can be easily hydrolyzed with HCl without affecting hydrophobic side chains. This family of amphiphilic graft copolymers can form stable micelles in water. The critical micelle concentration was determined by fluorescence spectroscopy. The micellar morphologies and sizes were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS). The sizes of micelles were dependent on ionic strength, pH value and preparation conditions.     

Polymeric micelle composed of PLA and chitosan as a drug carrier

Water soluble chitosan (CS) oligomer was hydrophobically modified with PLA unit. The chemical structure and physical properties of CS derivatives were confirmed by FTIR, ¹HNMR, TGA and X-RD. Formation and characteristics of polymeric micelles of graft copolymers were studied by fluorescence spectroscopy and dynamic light scattering (DLS) method. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation-dialysis method. Rifampin was incorporated into polymeric micelles as a lipophilic model drug to investigate the drug release behavior. As PLA weight ratio increased, the micelle size and drug-loading content increased, and the drug release rate decreased.     

Amphiphilic triblock copolymer based on poly(p‐dioxanone) and poly(ethylene glycol): Synthesis,characterization, and aqueous dispersion

Amphiphilic triblock copolymers composed of poly(p‐dioxanone) (PPDO) and poly(ethylene glycol) (PEG) were synthesized by ring opening polymerization of PDO initiated through dihydroxyl‐terminated PEG in the presence of stannous 2‐ethylhexanoate [Sn(oct)₂] as a catalyst. Polymeric nanoparticles were prepared in an aqueous medium (triple distilled water and phosphate buffer pH 7.4) by cosolvent evaporation technique at room temperature (25°C). Stability of nanoparticles was significantly enough in triple distilled water when compared with the phosphate buffer. Core‐shell geometry of polymeric nanoparticles was characterized by ¹H‐NMR spectroscopy and further confirmed by spectrophotometric analysis using pyrene as a probe. Variation in physicochemical characteristics of polymeric nanoparticles with the fraction of PPDO was investigated through the analysis of microscopic, spectroscopic, and light scattering techniques. Critical micelle concentration of polymer in triple distilled water decreased from 2.3 × 10^?3 to 4.7 × 10^?3. Atomic force microscopic observation revealed that polymeric nanoparticles were spherical and uniform with smooth textured of around 50–68 nm diameter. Dynamic light scattering and electrophoretic light scattering measurements showed a mono‐disperse size distribution of around 113–171 nm hydrodynamic diameters and negative zeta (ζ)‐potential (?4.00 to ?5.87 mV), respectively. The investigation showed a significant effect of polymeric composition on the physicochemical characteristic of polymeric nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2695–2702, 2007