Study on the synthesis,characterization, and sorption of some metal ions on gelatin‐ and acrylamide‐based hydrogels

Graft copolymers and networks of gelatin were synthesized with three acrylamides (acrylamide, 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid, and N‐iso‐propylacrylamide) by using a redox initiator system consisting of ammonium peroxysulfate–ferrous ammonium sulfate in either the absence or the presence of a crosslinker (N,N‐methylene bisacrylamide) at two temperatures. Characterization of synthesized polymers was studied by FTIR and thermal studies to investigate evidence of grafting or interpenetrating network formation and to investigate the effect of reaction conditions and crosslinker concentration on the properties of synthesized polymers. Detailed investigation into water‐uptake properties of these hydrogels was carried out as a function of time, temperature, and pH. The inherent properties of the monomer incorporated onto gelatin collectively act as determinant of the water‐absorption behavior of the hydrogels. Sorption of Fe⁺², Cr⁺⁶, and Cu⁺² ions from their aqueous solutions was also studied on select hydrogels, where it was observed that metal ions are sorbed by effective partitioning between hydrogels and solution phase and apart from the nature of metal ions, and structural aspects of hydrogels also determine the quantum of metal ion uptake. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3856–3871, 2003     

Synthesis and characterization of dextran hydrogels prepared with chlor‐ and nitrogen‐containing crosslinkers

In this study, we have synthesized dextran hydrogels by the crosslinking reactions of dextran with some selective Cl‐, and N‐containing functional monomers, such as epichlorohydrin (ECH), N,N′‐methylenebisacrylamide (MBAm), and glutaraldehyde (GA). Crosslinking reactions were carried out in the basic aqueous solutions (2.8NNaOH) at 25–50°C. The optimum conditions for effective crosslinking, i.e., temperature, crosslinking time, and amount of crosslinker, were determined for each system. The hydrogel discs of 3 mm diameter and 1.5 mm thickness were subjected to a number of Tris‐buffer solutions of desired pH (2.0–9.0) at 37°C. Swelling kinetics of the hydrogels were evaluated with second–order swelling model. The pH‐dependent swelling of hydrogels was strongly influenced by the functional group of crosslinker and crosslinker content. While the hydrogels prepared with ECH and MBAm shows higher swelling ability at basic medium than that of acidic medium, GA‐containing hydrogels exhibited just the opposite behavior. Mesh sizes (ξ) and average molecular weights between crosslinks (M_c) were estimated from swelling data using the Flory‐Rehner theory. Characterization studies were completed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4213–4221, 2006     

Swelling–deswelling kinetics of poly(N‐isopropylacrylamide) hydrogels formed in PEG solutions

A series of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was prepared by free‐radical crosslinking copolymerization of N‐isopropylacrylamide (NIPA) and N,N′‐methylenebisacrylamide (BAAm) in aqueous solutions of poly(ethylene glycol) of molecular weight 300 g/mol (PEG). The amount of PEG in the polymerization solvent, the crosslinker (BAAm) content, and the gel preparation temperature (T_prep) were varied in the gelation experiments. The hydrogels were characterized by the equilibrium swelling and elasticity tests as well as by the measurements of the deswelling–reswelling kinetics of the hydrogels in response to a temperature change between 25 and 48°C. The rate of deswelling of the swollen gel increases while the rate of reswelling of the collapsed gel decreases as the amount of PEG in the polymerization solvent is increased or as the crosslinker content is decreased. The T_prep effect on the swelling kinetics of the hydrogels was only observed if the PEG content of the polymerization solvent is less than 20%, which is explained with the screening of H‐bonding interactions in concentrated PEG solution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 37–44, 2006     

Electrical actuation of electroresponsive hydrogels based on poly(acrylamide‐co‐acrylic acid)/graphite suitable for biomedical applications

A pH‐sensitive composite hydrogel based on poly(acrylamide‐co‐acrylic acid)/graphite was prepared by solution polymerization process in presence of redox initiator potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine and cross‐linker (ethylene glycol dimethylacrylate). The structures of the hydrogels were confirmed using Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy (SEM) study. Tensile strengths of the hydrogels were determined by using a universal tensile machine, whereas the electrical conductivities of the hydrogels were evaluated using Four‐probe method. The influence of cross‐linker, graphite content, and temperature on the conductivity of the hydrogel was also investigated. The bending behavior of the conducting hydrogels was investigated by exposing the hydrogels under electric field in aqueous medium. By studying the swelling ratio of the polymer synthesized under different conditions, optimization conditions were found for a polymer with the highest swelling ratio. Also, the hemolytic potentiality test revealed that prepared hydrogels are biocompatible in nature. POLYM. COMPOS., 35:27–36, 2014. © 2013 Society of Plastics Engineers     

Microwave‐assisted preparation of temperature sensitive poly(N‐isopropylacrylamide) hydrogels in poly(ethylene oxide)‐600

In this article, a series of poly(N‐isopropylacrylamide) (PNIPAM)‐based hydrogels were prepared under microwave irradiation using poly(ethylene oxide)‐600 (PEO‐600) as reaction medium and microwave‐absorbing agent as well as pore‐forming agent. All of the temperature measurements, gel fractions, and FTIR analyses proved that the PNIPAM hydrogels were successfully synthesized. Within 1 min, the PNIPAM hydrogel with a 98% yield was obtained under microwave irradiation. The PNIPAM hydrogels thus prepared exhibited controllable properties such as pore size, equilibrium swelling ratios, and swelling/deswelling rates when changing the feed weight ratios of monomer (N‐isopropylacrylamide, NIPAM) to PEO‐600. These properties are well adapted to the different requirements for their potential application in many fields such as biomedicine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4177–4184, 2006     

Temperature‐responsive characteristics of poly(N‐isopropylacrylamide) hydrogels with macroporous structure

Macroporous poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by free‐radical crosslinking polymerization in aqueous solution from N‐isopropylacrylamide monomer and N,N‐methylenebis (acrylamide) crosslinker using poly(ethylene glycol) (PEG) with three different number‐average molecular weights of 300, 600 and 1000 g mol^?1 as the pore‐forming agent. The influence of the molecular weight and amount of PEG pore‐forming agent on the swelling ratio and network parameters such as polymer–solvent interaction parameter (χ) and crosslinking density (ν_E) of the hydrogels is reported and discussed. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights and compositions of PEG during polymerization. At a temperature below the volume phase transition temperature, the macroporous hydrogels absorbed larger amounts of water compared to that of conventional PNIPA hydrogels, and showed higher equilibrated swelling ratios in aqueous medium. Particularly, the unique macroporous structure provides numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to external temperature changes during the swelling and deswelling process. These macroporous PNIPA hydrogels may be useful for potential applications in controlled release of macromolecular active agents. Copyright © 2006 Society of Chemical Industry     

Novel hydrogels based on itaconic acid and citraconic acid: Synthesis,metal ion binding,and swelling behavior

Several copolymer hydrogels were prepared from radical copolymerization of 2‐hydroxypropyl methacrylate (HPMA) with itaconic acid (IA) and also with citraconic acid (CA) by using different feed ratios. The copolymers were characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy as well as by thermal analysis. The swelling process of the different hydrogels immersed in water at different pH has been studied, and also the swelling of the hydrogels loaded with metal ions (Pb²⁺, Cd²⁺) was investigated. The metal‐binding properties were studied by using the liquid‐phase polymer‐based retention technique, including studies on the influence of pH on the binding process. The efficiency of these hydrogels for the recovery of metal ions in solution was determined by atomic absorption spectroscopic analysis. The thermal characteristics of these copolymers were studied by using differential scanning calorimetry and thermogravimetric analysis in nitrogen atmosphere. Accordingly, the gels loaded with metal ions showed a slight increase of the thermal decomposition temperature when compared with the pristine gels. The copolymer gel HPMA‐co‐CA showed a single glass transition temperature, whereas for the copolymer systems, HPMA‐co‐IA, only the copolymers loaded with Cd²⁺ ions showed a glass transition temperature. The morphology of film produced from the copolymers was investigated by scanning electron microscopy, revealing generally smooth surfaces. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthetic polymeric absorbent for dye based on chemically crosslinked acrylamide/mesaconic acid hydrogels

Adsorption properties of copolymers of acrylamide and mesaconic acid (CAME) in aqueous Basic Blue 12 (Nile blue chloride) solution have been investigated. Chemically crosslinked CAME hydrogels with various compositions were prepared from ternary mixtures of acrylamide (A), mesaconic(ME) acid, and water by free radical polymerization in aqueous solution, using a multifunctional crosslinker such as ethylene glycol dimethacrylate (EGDMA). Dynamic swelling tests in water was applied to the hydrogels. Weight swelling ratio (S) values have been calculated. Sorption of Basic Blue 12 (BB 12) onto CAME hydrogels was studied by batch sorption technique at 25°C. In the experiments of the sorption, L type sorption in the Giles classification system was found. Some binding parameters such as initial binding constant (K_i), equilibrium constant (K), monolayer coverage (n), site‐size (u), and maximum fractional occupancy (Ô) for CAME hydrogels‐BB 12 binding system were calculated by using Klotz, Scatchard, and Langmuir linearization methods. Finally, the amount of sorbed BB 12 per gram of dry hydrogel (q) was calculated to be 2.28 × 10^?6–7.91× 10^?6 mol BB 12 per gram for hydrogels. Sorption % was changed range 16.09–58.86%. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 405–413, 2006     

Characterization of photo‐ and thermoresponsible amphiphilic copolymers having azobenzene moieties as side groups

Two series of amphiphilic copolymers, poly(HPMA‐co‐MPAP) I–V with n = 0.05–0.29 of the molar ratio of MPAP and poly(HPMA‐co‐MPAH)‐I–V with n = 0.05–0.23 of the molar ratio of MPAH, were prepared by radical copolymerization of N‐(2‐hydroxypropyl) methacrylamide (HPMA) with azo‐monomers such as 4‐(4‐methoxyphenylazo) phenyl methacrylate (MPAP) and 6‐[4‐(4‐methoxyphenylazo) phenoxy] hexyl methacrylate (MPAH) using 2,2′‐azobisisobutyronitrile as an initiator. Self‐organization of these copolymers in water was confirmed by disappearance of the proton signal of the methoxyazobenzene in ¹H‐NMR spectra measured in the solvent system of D₂O and CD₃OD. It was also found from the λ_max, located near 344 nm, that azobenzene groups self‐organized to form the dimeric chromophore type of aggregate. The aqueous solutions of poly(HPMA‐co‐MPAP) and poly(HPMA‐co‐MPAH) exhibited the lower critical solution temperature (LCST) from at 68 to 40°C and from at 70 to 52°C in the dark state, respectively, with increasing the molar ratios of azo‐monomers. On the other hand, the LCST measured in the photostationary state showed the higher temperature by 2–4°C compared with that in the dark state. It was found that the adsorption of poly(HPMA‐co‐MPAP)‐V (n = 0.29) on polystyrene microspheres was photoregulated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3056–3063, 2001     

Effect of porosigen on the swelling behavior and drug release of porous N‐isopropylacrylamide/poly(ethylene glycol) monomethylether acrylate copolymeric hydrogels

A series of porous thermoreversible hydrogels were prepared from N‐isopropylacrylamide (90 mol %) and poly(ethylene glycol) methylether acrylate (10 mol %), which was derived from poly(ethylene glycol) monomethylether, N,N′‐methylenebisacrylamide, and porosigen, or poly (ethylene glycol) (PEG) with different molecular weights (MWs). The influence of pore volume in the gel on the physical properties, swelling kinetics, and solute permeation from these porous gels was investigated. The results show that the surface areas, pore volumes, and equilibrium swelling ratios for the porous gels increased with increasing MW of PEG, but the shear moduli and effective crosslinking densities decreased with increasing MW of PEG. The results from the dynamic swelling kinetics show that the transport mechanism was non‐Fickian. The diffusion coefficients of water penetrating into the gels increased with increasing pore volume of the gels. In addition, we also studied solute permeation through the porous gel controlled by temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5490–5499, 2006     

Adsorption of surfactant by hydrophobically modified poly[2‐(diethylamino)ethylmethacrylate‐co‐N‐vinyl‐2‐pyrrolidone/octadecyl acrylate)] hydrogels and effect of surfactant adsorption on the volume phase transition

Hydrophobically modified poly[2‐(diethylamino)ethylmethacrylate‐co‐N‐vinyl‐2‐pyrrolidone/octadecyl acrylate) [P(DEAEMA‐co‐NVP/OA)] hydrogels were synthesized by free‐radical crosslinking copolymerization of 2‐(diethylamino)ethylmethacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (NVP) with different amounts of hydrophobic comonomer octadecyl acrylate (OA) in tert‐butanol with ethylene glycole dimethacrylate (EGDMA) as a crosslinker. The swelling equilibrium of the hydrogels was investigated as a function of temperature and hydrophobic comonomer content in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the type and concentration of surfactant solutions. Additionally, the amount of the adsorbed SDS and DTAB molecules onto the hydrogels was determined by fluorescence measurements. An increase of OA content in the hydrogel caused an increase in the amount of adsorbed surfactant molecules in both media. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3771–3775, 2007     

Synthesis and network parameters of hydrophobic poly(N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐lauryl acrylate) hydrogels

Hydrophobic poly(N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐lauryl acrylate) [P(DMAPMA‐co‐LA)] hydrogels with different LA content were synthesized by free‐radical crosslinking copolymerization of corresponding monomers in water by using N,N‐methylenebis(acrylamide) as the crosslinker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylethylenediamine as the activator. The swelling equilibrium of the hydrogels was investigated as a function of temperature and hydrophobic comonomer content in pure water. An interesting feature of the swelling behavior of the P(DMAPMA‐co‐LA) hydrogels with low LA content was the reshrinking phase transition where the hydrogels swell once and collapse as temperature was varied in the range of 30–40°C. The average molecular mass between crosslinks (M?_c) and polymer–solvent interaction parameter (χ) of the hydrogels were calculated from equilibrium swelling values. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter for the hydrogels were determined by using the Flory–Rehner theory based on the phantom network model of swelling equilibrium. The positive values for ΔH and ΔS indicated that the hydrogels had a positive temperature‐sensitive property in water, that is, swelling at a higher temperature and shrinking at a lower temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4159–4166, 2006     

Behavior of semi IPN hydrogels composed of PEG and AAm/SMA copolymers in swelling and uptake of Janus Green B from aqueous solutions

Semi-interpenetrating polymer network (semi IPN) hydrogels of poly(ethylene glycol; PEG) were prepared as a water adsorbent for dye (Janus Green B) sorption. For this, PEG and copolymer of acrylamide/sodium methacrylate (AAm/SMA) were prepared by polymerization of aqueous solution of acrylamide (AAm), sodium methacrylate (SMA) using ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TEMED) as redox initiating pair in presence of PEG and poly(ethylene glycol)dimethacrylate (PEGDMA) as crosslinker. FTIR spectroscopy was used to identify the presence of different repeating units in the semi IPNs. Some swelling and diffusion characteristics were calculated for different semi IPNs and hydrogels prepared under various formulations. Water uptake and dye sorption properties of AAm/SMA hydrogels and AAm/SMA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. Janus Green B have used in sorption studies. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effects of Charge and Charge Distribution on the Cellular Uptake of Multivalent Arginine‐Containing Peptide–Polymer Conjugates

Copolymers of N‐(2‐hydroxypropyl)methacrylamide (HPMA) and N‐methacryloyl‐β‐alaninyl‐S‐benzyl thioester were prepared by employing free radical or RAFT conditions and denominated as “NCL polymers”. The copolymer with a polydispersity index of 1.2–1.3 was used for the direct conjugation of unprotected peptides and peptide mixtures bearing differentially loaded side chains by native chemical ligation reactions conducted in aqueous buffer. Uptake into human HeLa cells was correlated with the overall surface charge and the ζ potentials of the peptide–polymer conjugates. Most notable were the differential effects found for various multivalent peptide–polymer conjugates containing arginine residues. Although positive ζ potentials were required for cellular uptake of the peptide–polymer conjugates, this sole charge effect was strongly dominated by the effect exerted by the relative distribution of arginine residues. Polymers conjugated with nona‐arginine peptides were over‐proportionally taken up, relative to their surface charge, compared to polymers with random distribution of single arginine residues. In view of these findings, peptide–polymer compositions suitable for efficient cellular uptake with negligible toxicity at polymer concentrations relevant for intracellular functional studies were determined.     

Simultaneous lower and upper critical solution temperature‐type co‐nonsolvency behaviour exhibited in water–dioxane mixtures by linear copolymers and hydrogels containing N‐isopropylacrylamide and N,N‐dimethylacrylamide

The co‐nonsolvency behaviour in water–dioxane mixtures of linear copolymers and hydrogels consisting of N‐isopropylacrylamide (NIPAM) and N,N‐dimethylacrylamide (DMAM) was studied as a function of solvent composition and temperature. The composition of the copolymers, P(NIPAM‐co‐DMAMx), in DMAM units, x, varies from x = 0 up to x = 100%. It is shown that the copolymers combine the lower critical solution temperature (LCST)‐type co‐nonsolvency behaviour of poly‐NIPAM with the upper critical solution temperature (UCST)‐type co‐nonsolvency behaviour of poly‐DMAM. Depending on x, both the LCST‐ and UCST‐type co‐nonsolvency behaviour may be simultaneously observed in water‐rich and dioxane‐rich solvent mixtures, respectively. Due to this complex phase separation behaviour, the variation of the reduced viscosity of the linear copolymers, as well as the swelling–deswelling behaviour of the respective hydrogels, are shown to be temperature‐ and solvent‐sensitive. Copyright © 2006 Society of Chemical Industry     

Functionalization of psyllium with methacrylic acid through grafting and network formation for use of polymers in water treatment

The psyllium husk, a natural polysaccharide, was modified to develop novel green polymeric materials for use in wastewater treatment technologies. Graft copolymers and three‐dimensional interpenetrating networks (IPNs) of psyllium (Psy) and methacrylic acid (MAAc) were prepared using ammonium persulphate (APS) as initiator. Network formation was carried out using N,N‐methylenebisacrylamide (N,N‐MBAAm) as crosslinker. The hydrogels, thus formed, were characterized using scanning electron microscopy (SEM), FTIR spectroscopy, and thermogravimetric analysis (TGA) to derive the structure–property correlation. Swellability of these hydrogels was analyzed in distilled water and aqueous NaCl solution as a function of time, temperature, pH, and [NaCl]. Flocculation efficiency of graft polymers was analyzed against aqueous kaolin suspension of known concentration as a function of settling time, temperature, amount of polymer, and pH. Novel polymeric materials were also used for the treatment of total hardness in tap water. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1025–1034, 2007     

Swelling behavior of thermoreversible poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels

Thermoresponsive hydrogels based on N‐isopropylacrylamide and N‐vinylimidazole were synthesized, and their swelling–deswelling behavior was studied as a function of the total monomer concentration. For copolymeric structures with better thermoresponsive properties with respect to poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels, these hydrogels were protonated with HCl and HNO₃, and the copolymer behaviors were compared with those of the unprotonated hydrogels. The temperature was changed from 4 to 70°C at fixed pHs and total ionic strengths. The equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all the hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1619–1624, 2004     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Swelling characteristics and in vitro drug release study with pH‐ and thermally sensitive hydrogels based on modified chitosan

The grafting of a poly(ethylene glycol) diacrylate macromer onto a chitosan backbone was carried out with different macromer concentrations. The grafting was achieved by (NH₄)₂Ce(NO₃)₆‐induced free‐radical poly merization. Biodegradable, pH‐ and thermally responsive hydrogels of poly(ethylene glycol)‐g‐chitosan crosslinked with a lower amount of glutaraldehyde were prepared for controlled drug release studies. Both the graft copolymers and the hydrogels were characterized with Fourier transform infrared, elemental analysis, and scanning electron microscopy. The obtained hydrogels were subjected to equilibrium swelling studies at different temperatures (25, 37, and 45°C) in buffer solutions of pHs 2.1 and 7.4 (similar to those of gastric and intestinal fluids, respectively). 5‐Fluorouracil was entrapped in these hydrogels, and equilibrium swelling studies were carried out for the drug‐entrapped gels at pHs 2.1 and 7.4 and 37°C. The in vitro release profile of the drug was established at 37°C and pHs 2.1 and 7.4. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 977–985, 2006     

Influence of the initiator system on the spatial inhomogeneity in acrylamide‐based hydrogels

The effect of the initiator system used in the gel preparation on the spatial inhomogeneity in poly(acrylamide) (PAAm) and poly(N,N‐dimethylacrylamide) (PDMA) hydrogels was investigated by static light scattering and elasticity measurements. The hydrogels were prepared by free‐radical crosslinking copolymerization of the monomers acrylamide (AAm) or N,N‐dimethylacrylamide (DMA) with N,N′‐methylenebisacrylamide as a crosslinker. Two different redox‐initiator systems, ammonium persulfate (APS)–N,N,N′,N′‐tetramethylethylenediamine (TEMED) and APS–sodium metabisulfite (SPS), were used to initiate the gelation reactions. Compared to the APS–TEMED redox pair, no significant scattered light intensity rise was observed during the crosslinking polymerization reactions initiated by the APS–SPS system. It was found that both PAAm and PDMA gels are much more homogeneous when the APS–SPS redox pair was used as the initiator. The results are explained by the formation of shorter primary chains as well as the delay of the gel point in APS–SPS initiated gel formation reactions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3228–3237, 2007