共查询到20条相似文献,搜索用时 203 毫秒
1.
光学经纬仪是施工企业的重要计量器具之一,施工现场在用经纬仪常因各种原因导致仪群精度下降,甚至捐坏。加强经纬仪的定期检定,实现计量器具检定合格后使用,对提高测量精度,保证工程质量具有重大意义。 相似文献
2.
3.
4.
在医院各种计量器具中,血压计是最基本、使用最频繁的计量器具。由于生产血压计企业产品质量参差不齐,势必要对其进行血压计检定修理工作室的防汞措施。本文在血压计检的零位检查、灵敏度检查、气密性检查以及示值误差的检定,然后重点就防汞措施进行了分析。 相似文献
5.
6.
分析目前燃气计量器具的使用状况,提出对超期膜式燃气表更换和流量计周期检定的必要性和法律依据,并对如何做好这项工作提出具体措施。 相似文献
7.
8.
随着我国民用建筑供暖体制的改革,作为计量收费的依据,也就是“用于贸易结算”的计量器具,集中供热用的热量表是属于国家规定“实行强制检定”的仪表产品。按照《中华人民共和国计量法》第十二条和第十五条的规定:“制造、修理计量器具的企业、事业单位,必须对制造修理的计量器具进行检定,保证产品计量性能合格”,“必须具备所制造修理的计量器具相适应的设施、人员和检定仪器设备”。热量表在我国是一种新产品,近几年来发展迅速,到了二十一世纪的现在,强调认真学习检定规程,实施建立检定系统装置;研究讨论检定技术方法,正是热量表在这一发… 相似文献
9.
《Planning》2015,(21)
天平为一种十分常见的测量辅助工具,主要应用在实验室、工业生产等需要进行计量、鉴定以及质量测量的工作之中。通过天平的应用,能够直观地得到测量结果,并有效保证测量的精度。砝码是确保测量准确性的关键因素,为提高天平的检定实效,必须定期对天平砝码开展有效的检定工作。以砝码对于天平的作用及意义作为切入点,重点分析了砝码鉴定误差的成因,并针对问题提出强化砝码检定质量的相应策略,以此提高测量精确度。 相似文献
10.
11.
研制开发了一套基于高精度PSD(位置敏感探测器)的三轴试验土样径向变形激光量测系统,将激光光电检测技术和光学三角法测距原理应用于土工三轴试验,实现了土样变形的非接触式多点直接量测,能够较精确的测定不同时刻试样高度不同位置处的直径变化值,对紫铜标准试件的测试精度为0.009 mm,应用该系统可对三轴试验过程中试样的应力应变性质进行更加符合实际受力状态的深入研究。文中还对影响测量精度和误差的主要因素进行了分析,并通过标准试件直径的实测结果验证了系统的测量精度。 相似文献
12.
13.
检测仪表在制水生产中的主要作用体现在两个方面,即计量检测和控制检测。本文根据供水企业在建立自动化控制生产体系过程中对检测仪表的选择配置以及在实践中对检测仪表管理经验总结,体现出检测仪表配置和集中管理的合理性。 相似文献
14.
随着建筑设计及施工技术的发展,各种异构建筑不断涌现,传统的全站仪测量方法难以有效获取面积计算数据.本文以某异构办公大楼为例,通过研究激光点云特点,给出其在规划面积核实测量中的解决方案.通过成果分析,验证了三维激光扫描技术在异构建筑规划面积核实测量中具有良好的应用前景. 相似文献
15.
结合北京汽车博物馆工程实例,通过仔细分析和研究建筑物的特点,采用较先进的测量仪器及方法,制定了科学合理的测量方案和工作程序,以确保测量的精度和进度。 相似文献
16.
17.
影响煤气用孔板流量计精确度的因素及对策 总被引:1,自引:0,他引:1
结合孔板流量计的实际使用情况,探讨了煤气密度(组分)变化、煤气含水量、煤气中的杂质、二次仪表的误差等造成孔板流量计精确度下降的主要因素,并提出了诸如修正密度、处理水和水蒸气、定期清洗、吹扫计量装置、定期校验二次仪表等措施。 相似文献
18.
19.
This paper introduces an in situ measuring method for the thermal resistance of buildings, including the test chamber, measuring points’ arrangement, and measurement results, in Nanjing during 2000 and 2001. Three methods for the analysis of in situ data are also presented to determine the thermal resistance of buildings although the R-values evaluated by these methods have smaller values than those of design due to the limitation of field conditions. The synthetic temperature method only requires measuring the heat flow rate on the inside surface of the building construction and both the synthetic indoor and outdoor temperatures. And the surface temperature method just requires testing the heat flow rate on the inside surface of building envelopes and both the inside and outside surface temperatures of building construction. However, the frequency response method introduced in this paper only relates to the mean synthetic indoor and outdoor temperatures and the average inside surface temperatures of the building envelopes. In other words, it is not involved with the heat flow rate, which is difficult to measure. Thus, on this point, the frequency response method is better than the other two methods to evaluate the in situ R-value of buildings. 相似文献
20.
K. A. Zalka 《The Structural Design of Tall and Special Buildings》2003,12(4):273-281
In combining two theoretical methods developed for the stability and frequency analyses of buildings and making use of experimental data obtained from the measurement of the fundamental frequency, a simple and reliable procedure is presented for the determination of the global critical load of regular building structures. It can be used for checking the stability and assessing the structural performance of existing buildings. The procedure is based on a closed‐form solution and design tables facilitating prompt calculation and can be carried out in minutes. The experimental data needed for the procedure is the fundamental frequency of the building, which can be obtained from standard measurements. The validity of the procedure is not dependent on the height of the building; it is equally applicable to low, medium‐rise and tall buildings. The results of tests on a small‐scale model are given for verification purposes. A worked example shows the easy use of the method. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献