Hydrothermal synthesis, characterization and magnetic properties of NaVGe2O6 and LiVGe2O6

Supercritical fluids are shown to be an excellent reaction media for the synthesis of novel solid state phases at intermediate temperatures. LiVGe₂O₆ and NaVGe₂O₆ have the common pyroxene structure composed of VO₆ linear chains. NaVGe₂O₆ crystallizes in the monoclinic space group C2/c with four formula units having cell dimensions a = 9.960(4) Å, b = 8.853(10) Å, c = 5.4861(10) Å, β = 106.403(3)°. The structure was refined until R = 0.0290 and R_w = 0.0370. For LiVGe₂O₆ in space group P2₁/c: a = 9.8508(7) Å, b = 8.754(3) Å, c = 5.3948(13) Å, β = 108(3)°, R = 0.0240 and R_w = 0.0250. The compounds contain edge-shared VO₆ octahedral chains and corner-shared GeO₄ tetrahedral chains. The presence of these VO₆ chains results in spin-Peierls distortion. Structural and physical characterization of the compounds are reported.     

Syntheses and magnetic properties of Eu3B2O6 and Sr3B2O6

Europium orthoborate and strontium orthoborate crystallize in the rhombohedral system with two formula units in a cell of dimensions $\text{a}{}_{\mathrm{R}}\text{=6.697}\text{A}\text{?}$, α_R=85.17° for Eu₃B₂O₆, and $\text{a}{}_{\mathrm{R}}\text{=6.695}\text{A}\text{?}$, α_R=85.00° for Sr₃B₂O₆. The equivalent hexagonal lattice parameters are $\text{a}{}_{\mathrm{H}}\text{=9.069}\text{A}\text{?}$, $\text{c}{}_{\mathrm{H}}\text{=12.542}\text{A}\text{?}$, and $\text{a}{}_{\mathrm{H}}\text{=9.046}\text{A}\text{?}$, $\text{c}{}_{\mathrm{H}}\text{=12.566}\text{A}\text{?}$ respectively. Eu₃B₂O₆ appears to be ferromagnetic below 7.5K.     

Structural and magnetic properties of epitaxial SnFe2O4 thin films

Epitaxial thin films of SnFe₂O₄ are deposited on sapphire substrate by ablating the sintered SnFe₂O₄ target with a KrF excimer laser (λ = 248 nm and pulsed duration of 20 ns). X-ray diffraction study reveals that SnFe₂O₄ films are epitaxial along (222) direction. The optical bandgap of SnFe₂O₄ film is estimated using transmittance vs. wavelength data and is observed to be 2.71 eV. The presence of hysteresis loop at room temperature in magnetization vs. field plot indicates the ferromagnetic behavior of the film. It is observed that the coercive field and remnant magnetization decrease with increase in temperature.     

Structural and magnetic properties of a mechanochemically activated Ti-Fe2O3 solid mixture

The mechanochemical effects on the reactivity and properties of a titanium/hematite powder mixture with molar ratio of 1/2 are investigated. Crystalline-phase structure, composition, hyperfine and magnetic behaviors were analyzed as a function of activation time by means of X-ray diffraction, scanning electron microscopy, Mössbauer spectroscopy and vibrating sample magnetometry. The results showed that at relatively short activation times metallic Ti reduces part of the ferric ions, yielding a complex product formed mainly by a mix of two solid solutions Fe_3−xTi_xO₄ (titanomagnetites), both with very different x values (0 < x < 1). Also metallic iron and superparamagnetic hematite particles were detected by Mössbauer spectroscopy. As the mechanical treatment extends the composition of the reactive mixture changes, prevailing in the end the solid solution with higher x value. In contrast, when these activated samples are thermally treated the fraction of the solid solution which is richer in Ti diminishes. This fact produces a significant variation of the saturation magnetization of the obtained material.     

Structural and magnetic properties of LaFe0.5Cr0.5O3 studied by neutron diffraction, electron diffraction and magnetometry

The structural and magnetic properties of the perovskite type compound LaFe_0.5Cr_0.5O₃ have been studied by temperature dependent neutron powder diffraction and magnetization measurements. Rietveld refinement of the neutron diffraction data shows that the compound crystallizes in an orthorhombic perovskite structure with a random positioning of the Fe and Cr cations at the B sublattice. The magnetic structure at 10 K is a collinear antiferromagnetic one with the magnetic moment per site being equal to 2.79(4) μ_B. Magnetisation measurements confirm the overall antiferromagnetic behaviour. Moreover, it indicates a weak uncompensated magnetic moment close to the transition temperature T_N ≈ 265 K. This moment can be described by a magnetic cluster state, which remains up to 550 K. Electron diffraction patterns along with high-resolution transmission electron microscopy images reveal that the crystallites are composed by domains of different orientation, which share the same cubic perovskite sub-cell reflections.     

Synthesis, characterization and magnetic properties of CoFe2O4 nanorods

In this work, we demonstrated a new precursor route to synthesize CoFe₂O₄ one-dimensional (1D) nanorods. CoFe₂O₄ nanorods were prepared via the thermal decomposition of CoFe₂(C₂O₄)₃ nanorod precursor, which was prepared by solvothermal method without the assistance of template or surfactant. The microstructure and magnetic property of the obtained products were characterized by x-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), thermogravimetric (TG) and differential thermal analysis (DTA) and vibrating sample magnetometer (VSM). The results showed that the as-prepared CoFe₂O₄ nanorods were built by magnetic nanoparticles after calcining the precursor nanorods at different temperatures, and the size variation of magnetic nanoparticles with calcination temperatures leaded to variable magnetic properties.     

Synthesis and selected properties of CrSbVO6 and phase relations in the V2O5–Cr2O3–α-Sb2O4 system in the solid state

Phase relations in the ternary oxide system V₂O₅–Cr₂O₃–α-Sb₂O₄ in the solid state in the atmosphere of air have been investigated by using the XRD, DTA/TG and IRS methods. Obtained results have shown that in the system the compound CrSbVO₆ is formed. This compound has been obtained both from oxides and from a mixture comprising CrSbO₄, CrVO₄ and SbVO₅ as well as from mixtures: CrSbO₄/V₂O₅, CrVO₄/α-Sb₂O₄ and SbVO₅/Cr₂O₃. A Solid product of incongruent melting of CrSbVO₆ at ∼1300°C is Cr₂O₃. CrSbVO₆ crystallizes in the tetragonal system and its calculated unit cell parameters amount to: a = b = 0.45719(12) nm, c = 0.30282(8) nm, Z = 2. The obtained results have allowed us also to divide the investigated system V₂O₅–Cr₂O₃–α-Sb₂O₄ into seven subsidiary subsystems and to determine temperatures and components concentration range in which CrSbVO₆ remains at equilibrium in the solid state with other phases formed in corresponding binary systems.     

Electrical conductivity and magnetic susceptibility of rutile type CrVNbO6, FeVNbO6 and NiV2Nb2O10

Electrical conductivity (77–300K) and magnetic susceptibility (4.2–300K) of rutile type polycrystalline samples of CrVNbO₆, FeVNbO₆ and NiV₂Nb₂O₁₀ are reported. All three compounds are n-type semiconductors with room termperature resistivities of the order of 10²–10³ ohm-cm. CrVNbO₆ shows ferromagnetic coupling in the high temperature region and orders antiferromagnetically below 10K. FeVNbO₆ trans-forms to a spin glass state below 20K. NiV₂Nb₂O₁₀ shows evidence of weak antiferromagnetic interactions. The transport properties of the compounds are discussed in terms of structural properties and unpaired d electrons present on the respective transition metal ions.     

Effect of doping with Co2O3, TiO2, Fe2O3, and Mn2O3 on the properties of Ce0.8Gd0.2O2?δ

The effects of Co, Fe, Mn, and Ti oxide additions on the sinterability and crystal-chemical, thermal, and electrical properties of Ce_0.8Gd_0.2O_2−δ have been studied. The results indicate that these oxides enhance the sinterability of the mixed oxide, regardless of whether they were introduced before or after synthesis. The most effective sintering aid is Co₂O₃. The lattice parameters of Ce_0.8Gd_0.2O_2−δ samples containing different metal oxide additions (1 mol %) are refined in space group Fm3m. The temperature-dependent thermal expansion data are used to determine the linear thermal expansion coefficients of the samples. Manganese oxide additions reduce the electrical conductivity of Ce_0.8Gd_0.2O_2−δ, whereas the other dopants increase it in the order Ti < Fe < Co. The activation energy for conduction increases in the order Co < Ti < Fe < Mn. Original Russian Text ? E.Yu. Pikalova, A.N. Demina, A.K. Demin, A.A. Murashkina, V.E. Sopemikov, N.O. Esina, 2007, published in Neorganicheskie Material, 2007, Vol. 43, No. 7, pp. 830–837.     

Electrical transport and magnetic properties in La0.67Ca0.33MnO3 and CuFe2O4 composites

The (1 − x) La_0.67Ca_0.33MnO₃/xCuFe₂O₄ (x = 0, 0.04, 0.07, 0.10 and 0.15) composites have been prepared and investigated systematically for their microstructure, electrical and magnetic properties. The X-ray diffraction and scanning electronic microscopy analysis reveal that both La_0.67Ca_0.33MnO₃ (LCMO) and CuFe₂O₄ phases are distributed in the composites. Compared with pure LCMO, an obvious enhancement of magnetoresistance is observed over a wide temperature range for the composites. Under 3 T field, the magnetoresistance rises from a base value 44.5% for pure LCMO, to a maximum value of 66.7% for x = 0.1 composite. Meanwhile, a weak temperature-dependent MR platform is observed in the temperature range from 210 K to 240 K. The MR enhancement is discussed in terms of spin-polarized intergrain tunneling due to enhanced magnetic disorder and magnetic coupling near boundaries between LCMO and CuFe₂O₄ grains.     

Structure, magnetic and thermal properties of Gd2MnTiO6

A new perovskite compound Gd₂MnTiO₆ was synthesized and its crystal structure, magnetic and thermal properties have been investigated. The XRD patterns were refined by the Rietveld method and the refined lattice parameters with the monoclinic space group P2₁/n (No. 14) were a=0.5398 (2), b=0.5704 (2), c=0.7767 (2) nm and β=89.68 (2)°. The antiferromagnetic behavior was observed below 16.0 K and λ-type heat capacity was measured near this temperature.     

NiFe2O4/T-ZnOW复合材料的制备及磁性能

采用化学镀法在四角氧化锌晶须(T-ZnO_W)表面包覆NiFe_2O_4镀层,制备了NiFe_2O_4/T-ZnO_W复合材料。利用X射线衍射仪、扫描电镜、能谱分析仪、振动样品磁强计对镀覆前后T-ZnOw的结构、形貌等进行了表征。结果表明,化学镀覆后,在T-ZnO_W表面包覆了致密的尖晶石型NiFe_2O_4镀层,T-ZnO_W针尖部位生成的镀层厚度比根部薄。NiFe_2O_4/T-ZnO_W复合材料具有软磁特性。随着退火温度的升高,复合材料的饱和磁化强度和矫顽力逐渐升高,在800℃达到最高。     

Structural consequences of Nb-substitution into Bi2WO6 and Bi2MoO6: high-resolution electron microscopic observations

High resolution electron microscope investigations have revealed planar structural discontinuities in Nb-substituted Bi₂WO₆ and Bi₂MoO₆. These features correspond to a type of layer overlap and a modified crystallographic shear respectively, and form the structural basis of a solid solution series.     

Structural properties of Al2O3-La2O3 binary oxides prepared by sol-gel

The structural properties of La₂O₃ and Al₂O₃-La₂O₃ binary oxides prepared by sol-gel were studied by XRD, HRTEM and UV-vis. The binary oxides with high lanthana contents show an amorphous structure after calcination at 650 °C. At calcination temperatures higher than 1000 °C there is a phase transformation from the amorphous state to the crystalline LaAlO₃ with a perovskite structure. The structure of La₂O₃ is consistent with the hexagonal system; however, some crystalline microdomains with a monoclinic structure were detected by HRTEM. Islands of La₂O₃ and LaAl₁₁O₁₈ phases were detected at high lanthana concentration in the binary oxide. The modification in the coordination shell of the Al³⁺ cations due to the interaction with La³⁺ cations confirms the formation of phases with a perovskite structure and the presence of islands of the LaAl₁₁O₁₈ phase.     

Structural and morphological properties of Fe2O3/TiO2 nanocrystals in silica matrix

We report on structural, morphological and ordering properties of Fe₂O₃/TiO₂ nanoparticles embedded in SiO₂-based multilayers. We investigated the structure of these systems by X-ray diffraction and grazing incidence small angle X-ray scattering after post-growth annealing. We found that the presence of TiO₂ promotes the growth and crystallization of the nanocrystals of Fe₂O₃. In multilayers containing both Fe₂O₃ and TiO₂, crystalline nanoparticles create partially ordered three-dimensional arrays.     

Structural, optical and electrical properties of reactively sputtered Ag2Cu2O3 films

Ag₂Cu₂O₃ thin films were deposited on glass substrates by RF magnetron sputtering of an equiatomic silver-copper target (Ag_0.5Cu_0.5) in reactive Ar-O₂ mixtures. The reactive sputtering was done at varying power, oxygen flow rate and deposition temperature to study the influence of these parameters on the deposition of Ag₂Cu₂O₃ films. The film structure was determined by X-ray diffraction, while the optical properties were examined by spectrophotometry (UV-vis-NIR) and photoluminescence. Furthermore, the film thickness and resistivity were measured by tactile profilometry and 4-point probe, respectively. Additional mobility, resistivity and charge carrier density Hall effect measurements were done on a few selected samples. The best films in terms of stoichiometry and crystallography were achieved with a sputtering power of 100 W, oxygen and argon flow rates of 20 sccm (giving a deposition pressure of 1.21 Pa) and a deposition temperature of 250 °C. The optical transmittance and photoluminescence spectra of films deposited with these parameters indicate several band gaps, most prominently, a direct one of around 2.2 eV. Electrical characterization reveals charge carrier concentrations and mobilities in the range of 10²¹-10²² cm^− 3 and 0.01-0.1 cm²/Vs, respectively.     

Optimization of spectroscopic properties of Yb-doped refractory sesquioxides: cubic Y2O3, Lu2O3 and monoclinic Gd2O3

Absorption and emission spectra are given for Yb³⁺-doped Y₂O₃, Lu₂O₃ and Gd₂O₃ at room temperature. Y₂O₃ and Lu₂O₃ as close cubic matrices, show Yb³⁺ similar spectra different of Yb³⁺ in Gd₂O₃ monoclinic structure. Here, we use a new method to study and optimize the main spectroscopic properties with only one concentration gradient sample. Finally, assignments of Yb³⁺ Stark levels and Raman vibrations in Y₂O₃, Lu₂O₃ and Gd₂O₃ single crystal are given.     

Structural and impedance properties of KBa2V5O15 ceramics

The polycrystalline sample of KBa₂V₅O₁₅ ceramics was prepared by a mixed oxide method at low temperature (i.e., at 560 °C). The formation of the compound was confirmed using an X-ray diffraction technique at room temperature. Scanning electron micrograph of the material showed uniform grain distribution on the surface of the sample. Detailed studies of dielectric properties of the compound as a function of temperature at different frequencies suggest that the compound has a dielectric anomaly of ferroelectric to paraelectric type at 323 °C, and exhibits diffuse phase transition. Electrical properties of the material were analyzed using a complex impedance technique. The Nyquists plot showed the presence of both grain (>10³ Hz) and the grain boundary (<10³ Hz) effects in the material. Studies of electrical conductivity over a wide temperature range suggest that the compound exhibits the negative temperature coefficient of resistance behavior. The ac conductivity spectrum was found to obey Jonscher's universal power law.     

Photoluminescence and thermoluminescence properties of Sr3Al2O6:Tb

Photoluminescence and thermoluminescence characteristics of the SrO-Al₂O₃ system doped with terbium have been studied and reported here. The phosphor was synthesized by a reflux sol-gel technique. With a view to study the dosimetric properties, the effect of beta irradiation has been studied in detail; further, concentration quenching effects observed in the emission of various terbium doped phosphors have led to optimization of dopant content. A case is made to project the phosphor as an efficient green light emitting material with good dosimetric properties.     

Structural and electrical properties of thin Ho2O3 gate dielectrics

This paper describes the structural properties and electrical characteristics of thin Ho₂O₃ gate dielectrics deposited on silicon substrates by means of reactive sputtering. The structural and morphological features of these films after postdeposition annealing were studied by X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy. It is found that Ho₂O₃ dielectrics annealed at 700 °C exhibit a thinner capacitance equivalent thickness and excellent electrical properties, including the interface trap density and the hysteresis in the capacitance-voltage curves. Under constant current stress, the Weibull slope of the charge-to-breakdown of the 700 °C-annealed films is about 1.7. These results are attributed to the formation of well-crystallized Ho₂O₃ structure and the reduction of the interfacial SiO₂ layer.