Effects of NOM properties on copper release from model solid phases

This study examined impacts of concentrations and properties of natural organic matter (NOM) on copper release from characteristic copper solid model phases such as tenorite CuO and malachite Cu₂(OH)₂CO₃. Unaltered Aldrich humic acid (AHA) and standard Suwannee River fulvic acid (SRFA) strongly increased copper release from the model phases but NOM alteration by chlorination or ozonation gradually suppressed or, at higher oxidant doses, eliminated these effects. The nature of NOM changes induced by chlorination and ozonation was examined using differential absorbance spectroscopy (DAS) and high-performance size-exclusion chromatography (HPSEC). The data of these methods show that NOM molecules with higher apparent molecular weight (AMW), higher aromaticities and contributions of protonation-active phenolic and carboxylic groups play a key role in adsorption and colloidal dispersion of the model solids. The data also show that metal release from model phases was well correlated with a number of spectroscopic parameters characterizing NOM properties, notably SUVA₂₅₄, spectral slopes of NOM absorbance, and differential absorbance at wavelength of 280 nm and 350 nm that is indicative of the contributions of carboxylic and phenolic functional groups. Changes of ζ-potential of the model solid phases were the strongest predictor of the enhancement of copper release especially in the system controlled by malachite. While effects of NOM on the ζ-potential of tenorite and malachite were prominent for unaltered NOM, its oxidation by chlorine and ozone was accompanied by a gradual decrease and ultimately disappearance of its surface activity.     

Differential absorbance study of effects of temperature on chlorine consumption and formation of disinfection by-products in chlorinated water

Effects of chlorine dose, reaction time and temperature on the formation of disinfection by-products (DBPs) and corresponding changes in the absorbance of natural organic matter (NOM) in chlorinated water were examined in this study. Although variations of chlorination parameters, notably those of temperature that was varied from 3 to 35 degrees C, influenced the kinetics of chlorine consumption and DBP release, correlations between chlorine consumption, concentrations of trihalomethanes (THMs), haloacetonitriles (HANs), other DBP species and, on the other hand, intensity of differential absorbance at 272nm remained unaffected. THM and HAN speciation was correlated with the differential absorbance, indicating preferential incorporation of bromine at the initial phases of halogenation that correspond to low DeltaA(272) values. Because the DeltaA(272) parameter is a strong indicator of the formation of DBP species and chlorine decay, optimization of chlorination operations and DBPs control based on this parameter can be beneficial for many water utilities, especially those with pronounced variability of water temperature and residence times.     

Absorbance spectroscopy-based examination of effects of coagulation on the reactivity of fractions of natural organic matter with varying apparent molecular weights

Absorbance spectra of fractions of natural organic matter (NOM) with varying apparent molecular weights (AMWs) were examined in this study. Size exclusion chromatography (SEC) was employed to obtain AMW distributions for three Australian water sources which represented low- and high-dissolved organic carbon (DOC) surface waters and a source with highly degraded NOM. These waters were coagulated with alum and other coagulants. Effects of coagulation on AMW distributions were quantified based on an absorbance slope index (ASI) calculated using NOM absorbance measured at 220, 230, 254 and 272 nm. This index can be calculated for any AMW fraction of NOM. Similarly to SUVA₂₅₄, ASI values decrease consistently in coagulated waters and are correlated with trihalomethane yields. Comparison of ASI indexes in different water sources indicates the presence of both common trends and differences indicative of NOM site-specificity.     

Comparison of advanced oxidation processes for the removal of natural organic matter

This study examined the impact of UV, ozone (O₃), advanced oxidation processes (AOPs) including O₃/UV, H₂O₂/UV H₂O₂/O₃ in the change of molecular weight distribution (MWD) and disinfection by-product formation potential (DBPFP). Bench-scale experiments were conducted with surface river water and changes in the UV absorbance at 254 nm (UV₂₅₄), total organic carbon (TOC), trihalomethane and haloacetic acid formation potential (THMFP, HAAFP) and MWD of the raw and oxidized water were analyzed to evaluate treatment performance. Combination of O₃ and UV with H₂O₂ was found to result in more TOC and UV₂₅₄ reduction than the individual processes. The O₃/UV process was found to be the most effective AOP for NOM reduction, with TOC and UV₂₅₄ reduced by 31 and 88%, respectively. Application of O₃/UV and H₂O₂/UV treatments to the source waters organics with 190-1500 Da molecular weight resulted in the near complete alteration of the molecular weight of NOM from >900 Da to <300 Da H₂O₂/UV was found to be the most effective treatment for the reduction of THM and HAA formation under uniform formation conditions. These results could hold particular significance for drinking water utilities with low alkalinity source waters that are investigating AOPs, as there are limited published studies that have evaluated the treatment efficacy of five different oxidation processes in parallel.     

Preparation and characterisation of new-polyaluminum chloride-chitosan composite coagulant

In this study, the formulation of a novel polyaluminum chloride-chitosan composite coagulant that improves the coagulation process for natural organic matter (NOM) removal was investigated. The performance of the composite coagulant was tested using two water sources (synthetic and natural water) to develop a better understanding on the behaviour of the composite coagulant. Fourier Transform-Infra red (FT-IR) spectroscopy, ferron analysis and zeta potential studies were performed to characterise the composite coagulant. FT-IR analysis showed that there is an intermolecular interaction between Al species and chitosan molecules, while ferron analysis indicated that the distributions of Al_a, Al_b, and Al_c in PACl-chitosan are different from those in PACl. At a low Al dosage (2.16 mg L⁻¹), a much higher removal of NOM from synthetic water, as evidenced from UV₂₅₄ and Dissolved Organic Carbon (DOC) measurements, was achieved by the composite coagulants in comparison to that removed by PACl or PACl and chitosan added separately. For natural water from the Myponga Reservoir, both polyaluminum chloride (PACl) and PACl-chitosan composite coagulants demonstrated similar dissolved organic carbon (DOC) percentage removal, whereas PACl-chitosan gave a slight improvement in removing the UV₂₅₄ absorbing components of NOM.     

Effects of water parameters on the degradation of microcystin-LR under visible light-activated TiO2 photocatalyst

A study was performed to determine the effect of pH, alkalinity, natural organic matter (NOM) and dissolved oxygen in the performance of nitrogen and fluorine doped TiO₂ (NF-TiO₂) for the degradation of hepatotoxin microcystin-LR (MC-LR) in synthetic and natural water under visible light irradiation. The initial degradation rate of MC-LR was fastest under acidic conditions (3.50 ± 0.02 × 10⁻³ μM min⁻¹ at pH 3.0) and decreased to 2.29 ± 0.07 × 10⁻³ and 0.54 ± 0.02 × 10⁻³ μM min⁻¹ at pH 5.7 and 7.1, respectively. Attractive forces between the opposite charged MC-LR and NF-TiO₂ are likely responsible for the enhancement in the photocatalytic decomposition of MC-LR resulting from increased interfacial adsorption. For carbonate buffered solutions, the photocatalytic activity of NF-TiO₂ was reduced when increasing the carbonate concentration up to 150 mg CaCO₃ L⁻¹. The scavenging of radical species by the bicarbonate ion at pH 7.1 is discussed. In the presence of NOM, the degradation rates decreased as pH and initial concentration of the NOM increased. The inhibition was higher with fulvic acid than humic acid under alkaline conditions. Oxygenated solution yields higher NF-TiO₂ photocatalytic degradation of MC-LR compared to nitrogen sparged solution at pH 5.7. The involvement of specific reactive oxygen species implicated in the photodegradation is proposed. Finally, no significant degradation is observed with various natural waters spiked with MC-LR under visible light (λ > 420 nm) but high removal was achieved with simulated solar light. This study provides a better understanding of the interactions and photocatalytic processes initiated by NF-TiO₂ under visible and solar light. The results indicate solar photocatalytic oxidation is a promising technology for the treatment of water contaminated with cyanotoxins.     

Modeling monochloramine loss in the presence of natural organic matter

A comprehensive model describing monochloramine loss in the presence of natural organic matter (NOM) is presented. The model incorporates simultaneous monochloramine autodecomposition and reaction pathways resulting in NOM oxidation. These competing pathways were resolved numerically using an iterative process evaluating hypothesized reactions describing NOM oxidation by monochloramine under various experimental conditions. The reaction of monochloramine with NOM was described as biphasic using four NOM specific reaction parameters. NOM pathway 1 involves a direct reaction of monochloramine with NOM (k_doc1=1.05×10⁴-3.45×10⁴ M⁻¹ h⁻¹). NOM pathway 2 is slower in terms of monochloramine loss and attributable to free chorine (HOCl) derived from monochloramine hydrolysis (k_doc2=5.72×10⁵-6.98×10⁵ M⁻¹ h⁻¹), which accounted for the majority of monochloramine loss. Also, the free chlorine reactive site fraction in the NOM structure was found to correlate to specific ultraviolet absorbance at 280 nm (SUVA₂₈₀). Modeling monochloramine loss allowed for insight into disinfectant reaction pathways involving NOM oxidation. This knowledge is of value in assessing monochloramine stability in distribution systems and reaction pathways leading to disinfection by-product (DBP) formation.     

Investigating dissolved air flotation performance with cyanobacterial cells and filaments

Dissolved air flotation (DAF) performance with two different naturally occurring cyanobacterial morphologies was investigated with respect to the biomass removal efficiency, the toxin release to water and the coagulant demand by different water background natural organic matter (NOM). Coagulation (C)/Flocculation (F)/DAF bench-scale experiments (2 min coagulation at 380 s⁻¹ with polyaluminium chloride (0.5-4 mg/L Al₂O₃, the dose depending on the water NOM content); 8 min flocculation at 70 s⁻¹; 8 min DAF with 5 bar relative pressure and 8% pressurised recycle) were performed with single cells of Microcystis aeruginosa and Planktothrix rubescens filaments spiked in synthetic waters with different NOM contents (hydrophobic vs. hydrophilic NOM; moderate (2-3 mgC/L) vs. moderate-high concentration (ca. 6 mgC/L)). For both morphologies, the results show no apparent cyanobacterial damage (since the water quality did not degrade in dissolved microcystins and the removal of intracellular microcystins matched the removal of chlorophyll a) and high biomass removal efficiencies (93-99% for cells and 92-98% for filaments) provided optimal coagulant dose for chlorophyll a removal was ensured. Charge neutralisation by the polyaluminium chloride was the main coagulation mechanism of the M. aeruginosa cells and most likely also of the P. rubescens filaments. The specific coagulant demand was severely affected by NOM hydrophobicity, hydrophobic NOM (with a specific UV_254nm absorbance, SUVA, above 4 L/(m mgC)) requiring ca. the triple of hydrophilic NOM (SUVA below 3 L/(m mgC)), i.e. 0.7 vs. 0.2-0.3 mg Al₂O₃/mg DOC.     

Impact of natural organic matter and divalent cations on the stability of aqueous nanoparticles

The stability of nanoparticles in aquatic environment plays an important role in determining their environmental implication and potential risk to human health. This research studied the impact of natural organic matter (NOM) and divalent cations (Ca²⁺) on the stability of engineered metal oxide nanoparticles (e.g. ZnO, NiO, TiO₂, Fe₂O₃ and SiO₂). When nanoparticles were present in neutral water, a relatively weak electrolyte concentration (0.01 M KCl) could result in their aggregation; however, with the addition of 1 mg/L NOM, the negative surface charge of nanoparticles increased significantly and therefore their propensity to aggregate is reduced. 4 mg/L NOM stabilized most nanoparticles by producing −30 mV or higher zeta potentials. On the other hand, the negative charge that NOM imparted to nanoparticles could be neutralized by divalent cations (calcium ions). 0.04 M-0.06 M Ca²⁺ induced the aggregation of NOM-coated nanoparticles. It should be noted that among all the studied nanoparticles, SiO₂ exhibited the unique stability due to its low NOM adsorption capacity and small Hamaker constant. SiO₂ remained stable no matter whether the solution contained NOM or Ca²⁺.     

Disinfection by-products formation and precursors transformation during chlorination and chloramination of highly-polluted source water: Significance of ammonia

Many studies have demonstrated the different trends of disinfection by-products (DBPs) formation between chlorination and chloramination. However, the reactions between precursors and disinfectants are widely assumed to be “black box” and the reasons for abovementioned difference are not well illustrated. This study focused on source water with high levels of natural organic matter (NOM) and bromide, and compared the transformation of NOM specific characteristics and the ratios of specific DBPs as an equivalent of chlorine to total organic halogen (TOX) among three disinfection scenarios of chlorination, chloramination and chlorine–chloramine sequential treatment (Cl₂–NH₂Cl process). A three-reaction-phrases model was proposed thereafter to illustrate the major reactions involved in, i.e., stage-I: rapid consumption of fast reactive sites (DOC₁), which transformed to slow reactive sites (DOC₂) and measured DBPs, i.e., trihalomethanes, haloacetic acids, etc; stage-II: oxidation and/or halogenation of DOC₂ into unknown TOX (UTOX) intermediates; stage-III: oxidation of UTOX intermediates into measured DBPs. The effect of ammonia was also quantified. Ammonia is observed to inhibit the formation of measured DBPs by 68–92%, 94–99%, and 92–95% of that in chlorination in Stage-I, II, and III, respectively, and the formation of UTOX is reduced by 2–80%, 60–94%, and 82–93% accordingly. These effects lead to the steady accumulation of DBPs intermediates such as UTOX, and to the elevated UTOX/TOX during chloramination and Cl₂–NH₂Cl process thereafter. The results illustrate the mechanism of ammonia participating in DBPs formation, and are valuable to fill in the gap between the transformation of precursors and the formation of different DBPs.     

Disinfection by-product formation following chlorination of drinking water: Artificial neural network models and changes in speciation with treatment

Artificial neural network (ANN) models were developed to predict disinfection by-product (DBP) formation during municipal drinking water treatment using the Information Collection Rule Treatment Studies database complied by the United States Environmental Protection Agency. The formation of trihalomethanes (THMs), haloacetic acids (HAAs), and total organic halide (TOX) upon chlorination of untreated water, and after conventional treatment, granular activated carbon treatment, and nanofiltration were quantified using ANNs. Highly accurate predictions of DBP concentrations were possible using physically meaningful water quality parameters as ANN inputs including dissolved organic carbon (DOC) concentration, ultraviolet absorbance at 254 nm and one cm path length (UV₂₅₄), bromide ion concentration (Br⁻), chlorine dose, chlorination pH, contact time, and reaction temperature. This highlights the ability of ANNs to closely capture the highly complex and non-linear relationships underlying DBP formation. Accurate simulations suggest the potential use of ANNs for process control and optimization, comparison of treatment alternatives for DBP control prior to piloting, and even to reduce the number of experiments to evaluate water quality variations when operating conditions are changed. Changes in THM and HAA speciation and bromine substitution patterns following treatment are also discussed.     

The impact of bromide/iodide concentration and ratio on iodinated trihalomethane formation and speciation

The objective of this study was to evaluate the formation and speciation of iodinated trihalomethanes (I-THMs) from preformed chloramination of waters containing bromide (Br⁻) and iodide (I⁻) at a Br⁻/I⁻ weight ratio of 10:1. The factors investigated were pH, iodide to dissolved organic carbon (I⁻/DOC) ratio, and NOM characteristics, specifically SUVA₂₅₄. A Br⁻/I⁻ ratio of 1:2 was also evaluated to determine the importance of Br⁻ and I⁻ concentrations and ratio on I-THM formation and speciation. Regulated triholamethanes (THMs) were measured alongside I-THMs for a more complete understanding of trihalomethane formation. The results showed that, in general, both I-THM and THM formation increased with decreased pH. Greater formation at lower pH was likely attributed to monochloramine decomposition and the formation of additional oxidants and substituting agents, most notably chlorine. For pH ≥ 7.5, I-THM yield increased with increasing I⁻/DOC ratio and decreasing specific ultraviolet absorbance (SUVA₂₅₄) of the water. The Br⁻/I⁻, Br⁻/DOC and I⁻/DOC ratios were important factors for I-THM and THM speciation. At pH 6, dichloroiodomethane (CHCl₂I) and bromochloroiodomethane (CHBrClI) were the dominant species at the common bromide and iodide levels. For pH ≥ 7.5 and for elevated bromide and iodide levels, iodoform (CHI₃) was always the dominant specie regardless of the Br⁻/I⁻ ratio. The results demonstrated that it is important to examine I-THM formation and speciation at typical Br⁻/I⁻ ratios (∼10) of natural waters, which have often been overlooked in previous investigations, in order to obtain practical and relevant results.     

Comparative effect of simulated solar light,UV, UV/H2O2 and photo-Fenton treatment (UV–Vis/H2O2/Fe) in the Escherichia coli inactivation in artificial seawater

Innovative disinfection technologies are being studied for seawater, seeking a viable alternative to chlorination. This study proposes the use of H₂O₂/UV₂₅₄ and photo-Fenton as disinfection treatment in seawater. The irradiations were carried out using a sunlight simulator (Suntest) and a cylindrical UV reactor. The efficiency of the treatment was compared for Milli-Q water, Leman Lake water and artificial seawater. The presence of bicarbonates and organic matter was investigated in order to evaluate possible effects on the photo-Fenton disinfection treatment. The photo-Fenton treatment, employing 1 mg L⁻¹ Fe²⁺ and 10 mg L⁻¹ of H₂O₂, led to the fastest bacterial inactivation kinetics. Using H₂O₂/UV₂₅₄ high disinfection rates were obtained similar to those obtained with photo-Fenton under UV₂₅₄ light. In Milli-Q water, the rate of inactivation for Escherichia coli was higher than in Leman Lake water and seawater due to the lack of inorganic ions affecting negatively bacteria inactivation. The presence of bicarbonate showed scavenging of the OH^• radicals generated in the treatment of photo-Fenton and H₂O₂/UV₂₅₄. Despite the negative effect of inorganic ions, especially HCO₃^-, the disinfection treatments with AOPs in lake water and seawater improved significantly the disinfection compared to light alone (simulated sunlight and UV₂₅₄). In the treatment of photo-Fenton with simulated sunlight, dissolved organic matter had a beneficial effect by increasing the rate of inactivation. This is associated with the formation of Fe³⁺-organo photosensitive complexes leading to the formation of ROS able to inactivate bacteria. This effect was not observed in the photo-Fenton with UV₂₅₄. Growth of E. coli surviving in seawater was observed 24 and 48 h after treatment with UV light. However, growth of surviving bacteria was not detected after photo-Fenton with UV₂₅₄ and H₂O₂/UV₂₅₄ treatments.     

Multi-wavelength spectroscopic and chromatography study on the photocatalytic oxidation of natural organic matter

The effect of TiO₂ photocatalytic oxidation on the natural organic matter (NOM) properties of two Australian surface waters were quantified using UV-vis spectroscopy, high performance size exclusion chromatography (HPSEC) with a multi-wavelength UV detector, liquid chromatography with organic carbon detector (LC-OCD), and trihalomethane formation potential (THMFP) analyses. Both the UV absorbance at wavelengths greater than 250 nm and dissolved organic carbon (DOC) content decreased significantly with treatment, although complete mineralization of NOM could not be achieved. Multi-wavelength UV detection of HPSEC analysis was shown to be useful to display further changes to NOM composition and molecular weight profiles because the organic molecules was transformed into compounds that absorb weakly at the typical detection wavelength of 250-260 nm. The multi-wavelength HPSEC results also revealed that photocatalytic oxidation yields by-products with a low aromaticity and low molecular weight. The LC-OCD chromatograms indicated that low molecular acids and neutral compounds remained after photocatalytic oxidation. Those groups of compounds did not seem to contribute significantly to the formation of trihalomethanes.     

Effects of UV/H2O2 advanced oxidation on chemical characteristics and chlorine reactivity of surface water natural organic matter

The advanced oxidation process utilizing ultraviolet and hydrogen peroxide (UV/H₂O₂) is currently applied in commercial drinking water applications for the removal of various organic pollutants. Natural organic matter (NOM) present in the source water can also be oxidized and undergo changes at the fluence and H₂O₂ concentrations applied in commercial drinking water UV/H₂O₂ applications (fluences less than 2000 mJ cm⁻², initial H₂O₂ concentrations less than 15 mg L⁻¹). In this study, the impact of UV/H₂O₂ on NOM’s aromaticity, hydrophobicity, and potential to form trihalomethanes (THMs) and haloacetic acids (HAAs) was investigated for raw surface water and the same water with the very hydrophobic acid (VHA) fraction of NOM removed. During UV/H₂O₂ treatments, NOM in the raw surface water was partially oxidized to less aromatic and hydrophobic characteristics, but was not mineralized, confirming findings from past research. Below fluences of 1500 mJ cm⁻² UV/H₂O₂ treatment of the raw water did not lead to reduction in the formation potential of THMs. The formation potential of HAAs was reduced at a fluence of 500 mJ cm⁻² with only small additional reductions as fluence further increased. For the water from which the VHA fraction was removed, UV/H₂O₂ treatment led to mineralization of NOM suggesting that, when coupled with a pre-treatment capable of removing the VHA fraction, UV/H₂O₂ could achieve further reductions in NOM. These subsequent reductions in NOM led to continuous reductions in the formation potentials of THMs and HAAs as fluence increased.     

Secondary effects of anion exchange on chloride, sulfate, and lead release: systems approach to corrosion control

Water treatment processes can cause secondary changes in water chemistry that alter finished water quality including chloride, sulfate, natural organic matter (NOM), and metal release. Hence, the goal of this research was to provide an improved understanding of the chloride-to-sulfate mass ratio (CSMR) with regards to chloride and sulfate variations at full-scale water treatment plants and corrosion potential under simulated premise plumbing conditions. Laboratory corrosion studies were conducted using Pb-Sn solder/Cu tubing galvanic cells exposed to model waters with low (approx. 5 mg/L Cl⁻ and 10 mg/L SO₄^2-) and high (approx. 50 mg/L Cl⁻ and 100 mg/L SO₄^2-) concentrations of chloride and sulfate at a constant CSMR of ∼0.5. The role of NOM during corrosion was also evaluated by changing the type of organic material. In addition, full-scale sampling was conducted to quantify the raw water variability of chloride, sulfate, and NOM concentrations and the changes to these parameters from magnetic ion exchange treatment. Test conditions with higher concentrations of chloride and sulfate released significantly more lead than the lower chloride and sulfate test waters. In addition, the source of NOM was a key factor in the amount of lead released with the model organic compounds yielding significantly less lead release than aquatic NOM.     

Tracking natural organic matter (NOM) in a drinking water treatment plant using fluorescence excitation-emission matrices and PARAFAC

Natural organic matter (NOM) in water samples from a drinking water treatment train was characterized using fluorescence excitation emission matrices (F-EEMs) and parallel factor analysis (PARAFAC). A seven component PARAFAC model was developed and validated using 147 F-EEMs of water samples from two full-scale water treatment plants. It was found that the fluorescent components have spectral features similar to those previously extracted from F-EEMs of dissolved organic matter (DOM) from diverse aquatic environments. Five of these components are humic-like with a terrestrial, anthropogenic or marine origin, while two are protein-like with fluorescence spectra similar to those of tryptophan-like and tyrosine-like fluorophores. A correlation analysis was carried out for samples of one treatment plant between the maximum fluorescence intensities (F_max) of the seven PARAFAC components and NOM fractions (humics, building blocks, neutrals, biopolymers and low molecular weight acids) of the same sample obtained using liquid chromatography with organic carbon detection (LC-OCD). There were significant correlations (p < 0.01) between sample DOC concentration, UVA₂₅₄, and F_max for the seven PARAFAC components and DOC concentrations of the LC-OCD fractions. Three of the humic-like components showed slightly better predictions of DOC and humic fraction concentrations than UVA_254. Tryptophan-like and tyrosine-like components correlated positively with the biopolymer fraction. These results demonstrate that fluorescent components extracted from F-EEMs using PARAFAC could be related to previously defined NOM fractions and that they could provide an alternative tool for evaluating the removal of NOM fractions of interest during water treatment.     

The relationship between TOX formation and spectral changes accompanying chlorination of pre-concentrated or fractionated NOM

The change in the absorbance upon chlorination (the differential absorbance, AA) of natural organic matter (NOM) that has been concentrated, isolated, and/or fractionated from five sources was explored as a possible indicator of the formation of total organic halogen (TOX) in the samples. The results demonstrate that concentration and isolation of NOM using techniques that are currently in widespread use does not significantly alter the TOX-deltaA272 relationship that applies to the unprocessed NOM. However, when such samples are fractionated, the TOX-deltaA272 relationships for the different fractions are not identical. In particular, when the hydrophobic and hydrophilic neutral fractions of NOM are chlorinated, the amount of TOX formed per unit of A272 destroyed is significantly larger than the corresponding value for other NOM fractions. This observation might reflect the relatively high content of proteins and other amino acid structures that can be disinfection by-product precursors but that absorb little or no light at 272 nm.     

The effect of ozonation on natural organic matter removal by alum coagulation

Natural organic matter (NOM) was extracted from a moderately colored, eutrophic surface water source (Forge Pond, Granby, MA), and fractionated into quasi-homogeneous fractions. Fulvic acid (FA) and hydrophilic neutrals (HN) were the two most abundant NOM fractions that were isolated. Adsorption affinity of the isolated NOM fractions on preformed aluminum hydroxide flocs increased with increase in specific organic charge of the fractions, except for the two most highly charged fractions, FA and hydrophilic acids (HAA), which showed less adsorption affinity than expected based on their specific organic charge. Prior ozonation of FA and HN fractions resulted in a decline and an increase, respectively, in their adsorption affinity on aluminum hydroxide surface. Prior ozonation of Forge Pond raw water resulted in a progressive decline in dissolved organic carbon (DOC) removal by alum coagulation with increase in ozone dose. It appeared that ozone applied to raw water reacted preferentially with the humic fraction of NOM, resulting in the detrimental effects of ozonation on subsequent NOM removal by alum coagulation being magnified. Forge Pond raw water was pre-coagulated to remove humic substances. Ozonation of the pre-coagulated water demonstrated the beneficial effects of ozonation on the removal of non-humic NOM through alum coagulation. A strategy for staged coagulation with intermediate ozonation was proposed for waters containing both humic and non-humic NOM for maximum DOC and specific UV absorbance at 254nm (SUVA) removal.     

Characterization of natural organic matter adsorption in granular activated carbon adsorbers

The removal of natural organic matter (NOM) from lake water was studied in two pilot-scale adsorbers containing granular activated carbon (GAC) with different physical properties. To study the adsorption behavior of individual NOM fractions as a function of time and adsorber depth, NOM was fractionated by size exclusion chromatography (SEC) into biopolymers, humics, building blocks, and low molecular weight (LMW) organics, and NOM fractions were quantified by both ultraviolet and organic carbon detectors. High molecular weight biopolymers were not retained in the two adsorbers. In contrast, humic substances, building blocks and LMW organics were initially well and irreversibly removed, and their effluent concentrations increased gradually in the outlet of the adsorbers until a pseudo-steady state concentration was reached. Poor removal of biopolymers was likely a result of their comparatively large size that prevented access to the internal pore structure of the GACs. In both GAC adsorbers, adsorbability of the remaining NOM fractions, compared on the basis of partition coefficients, increased with decreasing molecular size, suggesting that increasingly larger portions of the internal GAC surface area could be accessed as the size of NOM decreased. Overall DOC uptake at pseudo-steady state differed between the two tested GACs (18.9 and 28.6 g-C/kg GAC), and the percent difference in DOC uptake closely matched the percent difference in the volume of pores with widths in the 1-50 nm range that was measured for the two fresh GACs. Despite the differences in NOM uptake capacity, individual NOM fractions were removed in similar proportions by the two GACs.