共查询到20条相似文献,搜索用时 15 毫秒
1.
蒸发式冷凝器发展和应用 总被引:26,自引:0,他引:26
本文介绍了冷凝器型式特点及应用现状,比较了不同型式的冷凝器,着重阐述了蒸发式冷凝器的结构、原理及其优点,分析了蒸发式冷凝器的发展及应用现状,总结了蒸发式冷凝器使用中存在的问题并提出了解决问题的方法,展望了蒸发式冷凝器的发展方向和应用前景。 相似文献
2.
3.
基于振动的结构损伤识别方法研究进展 总被引:6,自引:1,他引:6
对近几十年来基于振动的结构损伤识别方法进行了归纳和总结,重点阐述了无模型的损伤识别方法和损伤识别的模型修正法,对损伤识别的神经网络法、小波分析法和时域法等也作了一定程度的介绍。分析了各种方法的优点和不足之处,讨论了基于振动的损伤识别技术存在的主要问题,并对进一步的研究方向作了展望。 相似文献
4.
Hamilton体系下的变分原理和半解析有限元解 总被引:3,自引:0,他引:3
本文通过讨论弹性力学几种主要变分原理在Hamilton体系下的表现形式,得出了在Hamilton体系下几种变分原理等价和相应泛函分为两类的结论,求出了基于两类泛函基础上的单元半解析解,并对单元性能进行了讨论。 相似文献
5.
6.
7.
本文讨论建立了客观标准的概念,建立客观标准的分类关系,深入研究了客观物质的标准关系,建立了组成物质的粒子链标准关系,提炼了客观物质的根标准元素——质子、中子、电子,以及下层次的上夸克和下夸克,建立了客观物质标准要素关系表,深入研究了生物繁衍的标准关系,提炼了DNA和RNA作为生物物种复制的标准要素,建立了生物要素的标准关系表,分析提炼了表征能量标准要素的功率频率元素,探讨了环境的标准关系,分析了客观存在标准形式的特点和哲理关系。 相似文献
8.
本文讨论建立了客观标准的概念,建立客观标准的分类关系,深入研究了客观物质的标准关系,建立了组成物质的粒子链标准关系,提炼了客观物质的根标准元素——质子、中子、电子以及下层次的上夸克和下夸克,建立了客观物质标准要素关系表,深入研究了生物繁衍的标准关系,提炼了DNA和RNA作为生物物种复制的标准要素,建立了生物要素的标准关系表,分析提炼了表征能量标准要素的功率频率元素,探讨了环境的标准关系,分析了客观存在标准形式的特点和哲理关系。 相似文献
9.
Jean Spitz 《Thin solid films》1977,45(1):31-41
High performance, low cost, selective surfaces which are chemically and thermally stable are a key limiting problem in the development of the thermal applications of solar energy. This review deals with selective coatings that withstand high temperatures. After indicating the comparative advantages of selective over black-body absorbers, the different ways of generating selectivity are briefly investigated. The physicochemical requirements that must be met, in addition to the specific optical properties that are needed, are established, and criteria for the choice of materials are given. Finally several examples of selective surfaces are described and some trends for further research in the field are discussed. 相似文献
10.
在内径为30mm的垂直上升管中,应用互相关分析和U型光导纤维探针,对水一气两相流和油-气两相流进行了各分相流量测量的实验研究,考虑了流型和雷诺数对流量测量的影响,同时研究了含气率的测量,提出了计算平均含气率的关系式。对水-气两相流,试验的气相折算流速范围为0.22~3.00m/s,波相折算流速范围为0.11~3.00m/s;对油一气两相流,试验的气相折算流速范围为0.10~19.01m/s,液相折算流速范围为0.35~1.65m/s。 相似文献
11.
Permanent magnets are finding ever-increasing uses as magnet technology develops and materials improve. Permanent magnet materials are evaluated in terms of the geometry and configuration of the application for which they are intended. The origin of the properties of most modern permanent magnet materials is interpreted in terms of fine-particle theory. The fine-particle structures are produced either synthetically or by a solid-state precipitation reaction in an alloy. The preparation and properties of commercial magnets are described. The Alnico alloys are based on magnetically heat-treated iron-nickel-aluminum-cobalt alloys and account for the great majority of present-day production. Ferrites are finding increasing use. Elongated single-domain fine-particle magnets and other materials are used in smaller quantities. A number of interesting, not yet commercial, materials deriving their properties primarily from crystal anisotropy are described. 相似文献
12.
13.
客观规律的标准是相对正确的支配力关系,是实践检验具有很好复现性的规律.本文讨论和建立了主客观型标准的概念和分类关系,分析了神学、哲学、自然科学、美学、社会科学与其学科标准形成有关的发展历史,揭示标准性认识产生和发展的规律,讨论了五类学科的标准类别,提炼展示了部分典型的标准内容,以对主观认识的客观规律标准有实在的概念.本文深入讨论了主客观型标准的强弱性、标准的适用范围、标准的内容形式等特点,讨论了主客观型标准间的价值关系,从主观性与客观性、直观性与抽象性、意识与物质方面讨论了主客观型标准的哲理. 相似文献
14.
萧纪美 《材料科学与工程学报》1997,(2)
本文论述了自然环境与社会环境对材料的影响与作用。首先介绍了环境与作为系统的材料之间的关系。给出了材料的定义和判据。分析了社会大环境与经济体制对经济持续发展及材料事业发展的影响。并依次讨论了人类处理材料与自然环境关系的三个阶段:一、适应和改变;二、学习和利用;三、保护。其中还介绍了失效物理与环境控制、耗散结构、智能材料和环境意识材料。最后以诗一首,总结材料工作者对环境应有的五个正确对待 相似文献
15.
16.
17.
The factors causing problems in sputter deposition of thin films are analysed and possible design solutions are offered. ZnO sputtered films are used as a probe for studying problems. The physical parameters of the discharge that have influence on the sputtering processes are described and related to the sputtering parameters. A comparison of discharges used in Diode, Magnetron, and Triode arrangements with respect to their system performances results in the conclusion that Magnetrons are superior to Diodes and that Triodes are better than Magnetrons, in spite of the fact that Triodes' discharges are of the supported kind and their deposited layers are difficult to reproduce. 相似文献
18.
砌体墙在竖向压力和平面内水平剪力复合作用下的破坏准则是确定砌体抗剪承载力的重要依据。通过对比分析, 推导出基于最大主应力理论、剪摩理论、Mohr 理论和变形能理论的适合于砌体在剪压复合作用下的破坏准则。考虑到微元体与宏观墙模型的差别, 建立了相应于各种破坏准则的砌体抗剪承载力计算公式。并将公式的计算结果与收集的111 片普通粘土砖砌体墙片的试验结果进行了对比分析, 得到了常用多层砌体房屋墙的抗剪承载力计算公式。 相似文献
19.
声波远探测方法已逐渐成为石油测井的一门重要应用技术,声源向井外地层中的辐射特性是远探测声场的主控因数。推导了单极、偶极和四极子声源的远场位移渐近解与辐射指向性公式,模拟分析了低频和常规测井频率下多极子声源在井外地层中的辐射图样,优选出不同声源辐射到地层中的优势波类型,并对比了不同频率下优势波指向性的变化规律。结果表明:单极辐射P波和偶极辐射SH横波在各自的辐射声场中占据了主导地位,它们对应的最佳激发频段分别在10 k Hz和4 k Hz左右,而在四极子声源的辐射声场中,P波和SH横波的指向性相近,均优于SV横波,且两者在7 k Hz左右达到最佳,为多极子声波远探测技术的应用提供了理论支持。 相似文献
20.
The class of exponential smoothing models which vary the values of their parameters to adapt to changing conditions in a time series are referred to as adaptive forecasting techniques. In this article criteria for evaluating forecasting models are presented and the features of a simple exponential smoothing model that are exploited by the adaptive techniques are discussed. Several adaptive forecasting schemes are described and classified, and examples of the performance of these techniques are presented. 相似文献