Combined electron capture and infrared multiphoton dissociation for multistage MS/MS in a Fourier transform ion cyclotron resonance mass spectrometer

We have mounted a permanent on-axis dispenser cathode electron source inside the magnet bore of a 9.4-T Fourier transform ion cyclotron resonance mass spectrometer. This configuration allows electron capture dissociation (ECD) to be performed reliably on a millisecond time scale. We have also implemented an off-axis laser geometry that enables simultaneous access to ECD and infrared multiphoton dissociation (IRMPD). Optimum performance of both fragmentation techniques is maintained. The analytical utility of performing either ECD or IRMPD on a given precursor ion population is demonstrated by structural characterization of several posttranslationally modified peptides: IRMPD of phosphorylated peptides results in few backbone (b- and y-type) cleavages, and product ion spectra are dominated by neutral loss of H3PO4. In contrast, ECD provides significantly more backbone (c- and z*-type) cleavages without loss of H3PO4. For N-glycosylated tryptic peptides, IRMPD causes extensive cleavage of the glycosidic bonds, providing structural information about the glycans. ECD cleaves all backbone bonds (except the N-terminal side of proline) in a 3-kDa glycopeptide with no saccharide loss. However, only a charge-reduced radical species and some side chain losses are observed following ECD of a 5-kDa glycopeptide from the same protein. An MS3 experiment involving IR laser irradiation of the charge-reduced species formed by electron capture results in extensive dissociation into c- and z-type fragment ions. Mass-selective external ion accumulation is essential for the structural characterization of these low-abundance (modified) peptides.     

Infrared multiphoton dissociation of duplex DNA/drug complexes in a quadrupole ion trap

Noncovalent duplex DNA/drug complexes formed between one of three 14-base pair non-self-complementary duplexes with variable GC content and one of eight different DNA-interactive drugs are characterized by infrared multiphoton dissociation (IRMPD), and the resulting spectra are compared to conventional collisionally activated dissociation (CAD) mass spectra in a quadrupole ion trap mass spectrometer. IRMPD yielded comparable information to previously reported CAD results in which strand separation pathways dominate for complexes containing the more AT-rich sequences and/or minor groove binding drugs, whereas drug ejection pathways are prominent for complexes containing intercalating drugs and/or duplexes with higher GC base content. The large photoabsorptive cross section of the phosphate backbone at 10.6 mum promotes highly efficient dissociation within short irradiation times (<2 ms at 50 W) or using lower laser powers and longer irradiation times (<15 W at 15 ms), activation times on par with or shorter than standard CAD experiments. This large photoabsorptivity leads to a controllable ion activation method which can be used to produce qualitatively similar spectra to CAD while minimizing uninformative base loss dissociation pathways or instead be tuned to yield a high degree of secondary fragmentation. Additionally, the low-mass cutoff associated with conventional CAD plays no role in IRMPD, resulting in richer MS/MS information in the low m/z region. IRMPD is also used for multiadduct dissociation in order to increase MS/MS sensitivity, and a two-stage IRMPD/IRMPD method is demonstrated as a means to give specific DNA sequence information that would be useful when screening drug binding by mixtures of duplexes.     

Electron capture dissociation and infrared multiphoton dissociation MS/MS of an N-glycosylated tryptic peptic to yield complementary sequence information

Glycoproteins are a functionally important class of biomolecules for which structural elucidation presents a challenge. Fragmentation of N-glycosylated peptides, employing collisionally activated dissociation, typically yields product ions that result from dissociation at glycosidic bonds, with little occurrence of dissociation at peptide backbone sites. We have applied two dissociation techniques, electron capture dissociation (ECD) and infrared multiphoton dissociation (IRMPD), in a 7-T Fourier transform ion cyclotron resonance mass spectrometer, in the investigation of an N-glycosylated peptide from an unfractionated tryptic digest of the lectin of the coral tree, Erythrina corallodendron. ECD provided c and z. ions derived from the peptide backbone, with no observed loss of sugars. Cleavage at 11 of 15 backbone amine bonds was observed. The lack of cleavage at sites located close to the glycosylated asparagine residue may result from steric blocking by the glycan. IRMPD provided abundant fragment ions, primarily through dissociation at glycosidic linkages. The monosaccharide composition and the presence of three glycan branch sites could be determined from the IRMPD fragments. The two types of spectra, obtained with the same instrument, thus provide complementary structural information about the glycopeptide. The current result extends the applicability of ECD for glycopeptide analysis to N-glycosylated peptides and to peptides containing branched, highly substituted glycans.     

Infrared multiphoton dissociation of O-linked mucin-type oligosaccharides

Oligosaccharides are known to play important roles in many biological processes. In the study of oligosaccharides, collision-induced dissociation (CID) is the most common dissociation method to elucidate the sequence and connectivity. However, a disadvantage of CID is the decrease in both the degree and efficiency of dissociation with increasing mass. In the present study, we have successfully performed infrared multiphoton dissociation (IRMPD) on 39 O-linked mucin-type oligosaccharide alditols (both neutral and anionic). CID and IRMPD spectra of several oligosaccharides were also compared. They yielded nearly identical fragment ions corresponding to the lowest energy fragmentation pathways. The characteristic fragmentations of structural motifs, which can provide the linkage information, were similarly presented in both CID and IRMPD spectra. Multistage of CID (MS(3) or MS(4)) is commonly needed to completely sequence the oligosaccharides, while IRMPD of the same compounds yielded the fragment ions corresponding to the loss of the first residue to the last residue during a single-stage tandem MS (MS(2)). Finally, it is shown that the fragmentation efficiency of IRMPD increases with the increasing size of oligosaccharides.     

Infrared multiphoton dissociation for enhanced de novo sequence interpretation of N-terminal sulfonated peptides in a quadrupole ion trap

Infrared multiphoton dissociation (IRMPD) of N-terminal sulfonated peptides improves de novo sequencing capabilities in a quadrupole ion trap mass spectrometer. Not only does IRMPD promote highly efficient dissociation of the N-terminal sulfonated peptides but also the entire series of y ions down to the y(1) fragment may be detected due to alleviation of the low-mass cutoff problem associated with conventional collisional activated dissociation (CAD) methods in a quadrupole ion trap. Commercial de novo sequencing software was applied for the interpretation of CAD and IRMPD MS/MS spectra collected for seven unmodified peptides and the corresponding N-terminal sulfonated species. In most cases, the additional information obtained by N-terminal sulfonation in combination with IRMPD provided significant improvements in sequence identification. The software sequence tag results were combined with a commercial database searching algorithm to interpret sequence information of a tryptic digest on alpha-casein s1. Energy-variable CAD studies confirmed a 30-40% reduction in the critical energies of the N-terminal sulfonated peptides relative to unmodified peptides. This reduction in dissociation energy facilitates IRMPD in a quadrupole ion trap.     

Applications of electron-ion dissociation reactions for analysis of polycationic chitooligosaccharides in Fourier transform mass spectrometry

Singly protonated, doubly protonated, and sodiated pentaglucosamide (GlcNAc)(5), oligoglucosamines (GlcN)(m)(), and (GlcN)(3)GlcN(3OH14:0) were analyzed in an FTICR mass spectrometer by electron-ion dissociation reactions and compared to collision activation. The general fragmentation mode was found as the asymmetrical sequence fragments (B(n)() and minor C(n)() ion series) with full sequence coverage. Molecular mass information of each glucosamide or glucosamine residue can be readily obtained from the ion series. Fragmentation by electron capture dissociation revealed additional fragmentation of the N-acetyl moiety compared to sustained off-resonance irradiation collision-activated dissociation (SORI-CAD) and electron-induced dissociation (EID). Sodiated GlcNAc(5) molecular adduct ions were analyzed by EID and compared to CAD. Both techniques provided full sequence coverage. EID was more effective, but CAD resulted in the cross-ring ion products (0,2)A(n)() and (2,4)A(n)() for all relevant glucosamide residues.     

Electron detachment dissociation and negative ion infrared multiphoton dissociation of electrosprayed intact proteins

In top-down proteomics, intact gaseous proteins are fragmented in a mass spectrometer by, e.g., electron capture dissociation (ECD) to obtain structural information. By far, most top-down approaches involve dissociation of protein cations. However, in electrospray ionization of phosphoproteins, the high acidity of phosphate may contribute to the formation of intramolecular hydrogen bonds or salt bridges, which influence subsequent fragmentation behavior. Other acidic proteins or proteins with regions containing multiple acidic residues may also be affected similarly. Negative ion mode, on the other hand, may enhance deprotonation and unfolding of multiply phosphorylated or highly acidic protein regions. Here, activated ion electron detachment dissociation (AI-EDD) and negative ion infrared multiphoton dissociation (IRMPD) were employed to investigate the fragmentation of intact proteins, including multiply phosphorylated β-casein, calmodulin, and glycosylated ribonuclease B. Compared to AI-ECD and positive ion IRMPD, AI-EDD and negative ion IRMPD provide complementary protein sequence information, particularly in regions with high acidity, including the multiply phosphorylated region of β-casein.     

Hybrid activation methods for elucidating nucleic acid modifications

Hybrid tandem mass spectrometry (MS/MS) techniques combining electron transfer (ET) and collision activated dissociation (CAD), infrared multiphoton dissociation (IRMPD), or ultraviolet photodissociation (UVPD) were implemented and evaluated for the characterization of a series of oligonucleotides and oligoribonucleotides, including both native single strands and single strands containing platinated, phosphorothioated, and 2'-O-methylated modification sites. ET-IRMPD and ET-UVPD of oligodeoxynucleotides and oligoribonucleotides resulted in rich fragmentation with respect to production of w, a, z, and d ions for DNA, and c, y, w, a-B, d, and z ions for RNA, with many product ions retaining the modification and thus allowing site specific identification. ET-IRMPD caused more extensive secondary dissociation of the ions, in addition to a broader distribution of detectable sequence ions attributed to using a lower mass cutoff. ET-UVPD promoted higher energy fragmentation pathways and created the most diverse MS/MS spectra. The numerous products generated by the hybrid MS/MS techniques resulted in specific and extensive backbone cleavages which allowed the modification sites of multiply modified oligonucleotides to be elucidated.     

Electron-induced dissociation of singly charged organic cations as a tool for structural characterization of pharmaceutical type molecules

Collision-induced dissociation (CID) and electron-induced dissociation (EID) have been investigated for a selection of small, singly charged organic molecules of pharmaceutical interest. Comparison of these techniques has shown that EID carried out on an FTICR MS and CID performed on a linear ion trap MS produce complementary data. In a study of 33 molecule-cations, EID generated over 300 product ions compared to 190 product ions by CID with an average of only 3 product ions per precursor ion common to both tandem MS techniques. Even multiple stages of CID failed to generate many of the product ions observed following EID. The charge carrying species is also shown to have a very significant effect on the degree of fragmentation and types of product ion resulting from EID. Protonated species behave much like the ammonium adduct with suggestion of a hydrogen atom from the charge carrying species strongly affecting the fragmentation mechanism. Sodium and potassium are retained by nearly every product ion formed from [M + Na](+) or [M + K](+) and provide information to complement the EID of [M + H](+) or [M + NH(4)](+). In summary, EID is proven to be a fitting partner to CID in the structural elucidation of small singly charged ions and by studying EID of a molecule-ion holding different charge carrying species, an even greater depth of detail can be obtained for functional groups commonly used in synthetic chemistry.     

Consecutive ion activation for top down mass spectrometry: improved protein sequencing by nozzle-skimmer dissociation

Mass spectra produced by nozzle-skimmer dissociation (NSD) have been little used in the past for structural characterization. NSD cannot be used on mass-separated ions (MS/MS), and for electrosprayed protein ions, previous NSD spectra showed backbone cleavages similar to those from energetic methods such as collisionally activated dissociation (CAD) or infrared multiphoton dissociation (IRMPD). However, our experimental configuration with Fourier transform (FT) MS makes possible three consecutive steps of NSD ion activation: thermal in the entrance capillary and collisional in both the nozzle-skimmer (N-S) region and the region after the skimmer before the quadrupole entrance lens (S-Q). In the high-pressure N-S region of adjustable path length, ions undergo high-frequency, low-energy collisions to rupture weak noncovalent or covalent bonds, with these "denatured" products then subjected to high-energy collisions in the low-pressure S-Q region to cleave strong backbone bonds. These NSD spectra, plus those from variable capillary thermal activation, of 8+ to 11+ ubiquitin ions electrosprayed from denatured solution show backbone cleavages between 74 of 75 amino acid pairs, vs 66 for CAD and 50 for IRMPD in the FTMS cell. Thermal activation by the inlet capillary of the newly desolvated 6+, 7+ ubiquitin ions from electrospraying the native conformer increases the NSD yield from 8% at 56 degrees C to 96% at 76 degrees C, but with little change in product branching ratios; this capillary heating has no effect on CAD or IRMPD of these ions collected in the FTMS cell. Ion desolvation with its concomitant H-bond strengthening appears to produce a transiently stable conformer whose formation can be prevented by capillary heating. The far more complex and stable noncovalent tertiary structures of large protein ions in the gas phase have made MS/MS difficult; initial inhibition of tertiary structure formation with immediate NSD ("prefolding dissociation") appears promising for the top down characterization of a 200-kDa protein.     

Infrared multiphoton dissociation of alkali metal-coordinated oligosaccharides

Infrared multiphoton dissociation (IRMPD) of alkali metal-coordinated oligosaccharides was obtained in a Fourier transform mass spectrometer. Fragmentation of the oligosaccharides was observed for Li+- and Na+-coordinated species. For larger alkali metal ions (K+, Rb+, and Cs+), the major products were the alkali metal ions. IRMPD experiments were performed on milk oligosaccharides, and the dissociation thresholds were determined. The threshold values were found to differ for the isomers. It is suggested that the threshold may be useful for differentiating isomeric compounds. Additionally, oligosaccharide alditols from biological samples were analyzed. Comparison of the collision-induced dissociation (CID) and IRMPD spectra of oligosaccharide alditols revealed that IRMPD could be used as a complementary method to obtain structural information.     

Electron capture dissociation of oligosaccharides ionized with alkali, alkaline Earth, and transition metals

We extend the application of electron capture dissociation (ECD) (which requires at least two charges) to oligosaccharides without basic functionalities by utilizing alkali, alkaline earth, and transition metals (Na+, K+, Ca2+, Ba2+, Mg2+, Mn2+, Co2+, and Zn2+) as charge carriers in electrospray ionization. Both linear and branched oligosaccharides were examined, including maltoheptoase, p-lacto-N-hexaose, and an N-linked glycan from human alpha1-acid glycoprotein. For comparison, infrared multiphoton dissociation (IRMPD) was also applied to all oligosaccharide species. We show that, for certain metal-adducted oligosaccharides, particularly maltoheptaose, cross-ring cleavage, which can provide saccharide linkage information, is the dominant fragmentation pathway in ECD. By contrast, glycosidic cleavages dominate in IRMPD although cross-ring fragmentation was also observed to varying degrees depending on metal ion type. The branched N-linked glycan did not fragment as easily following ECD compared to the linear oligosaccharides, presumably due to intramolecular noncovalent interactions. However, this limitation was partially overcome with a combined ECD/IRMPD approach (activated ion ECD). For all metal-adducted oligosaccharides, complementary structural information was obtained with ECD as compared to IRMPD. Our results demonstrate that ECD of metal-adducted oligosaccharides is a valuable tool for structural characterization of oligosaccharides.     

Structural analysis of intact monoclonal antibodies by electron transfer dissociation mass spectrometry

Improving qualitative and quantitative characterization of monoclonal antibodies is essential, because of their increasing popularity as therapeutic drug targets. Electron transfer dissociation (ETD)-based top-down mass spectrometry (MS) is the method of choice for in-depth characterization of post-translationally modified large peptides, small- and medium-sized proteins, and noncovalent protein complexes. Here, we describe the performance of ETD-based top-down mass spectrometry for structural analysis of intact 150 kDa monoclonal antibodies, immunoglobulins G (IgGs). Simultaneous mass analysis of intact IgGs as well as a complex mixture of ETD product ions at sufficiently high resolution and mass accuracy in a wide m/z range became possible because of recent advances in state-of-the-art time-of-flight (TOF) mass spectrometry. High-resolution ETD TOF MS performed on IgG1-kappa from murine myeloma cells and human anti-Rhesus D IgG1 resulted in extensive sequence coverage of both light and heavy chains of IgGs and revealed information on their variable domains. Results are superior and complementary to those previously generated by collision-induced dissociation. However, numerous disulfide bonds drastically reduce the efficiency of top-down ETD fragmentation within the protected sequence regions, leaving glycosylation uncharacterized. Further increases in the experiment sensitivity and improvement of ion activation before and after ETD reaction are needed to target S-S bond-protected sequence regions and post-translational modifications.     

Characterization of o-sulfopeptides by negative ion mode tandem mass spectrometry: superior performance of negative ion electron capture dissociation

Positive ion mode collision-activated dissociation tandem mass spectrometry (CAD MS/MS) of O-sulfopeptides precludes determination of sulfonated sites due to facile proton-driven loss of the highly labile sulfonate groups. A previously proposed method for localizing peptide and protein O-sulfonation involves derivatization of nonsulfonated tyrosines followed by positive ion CAD MS/MS of the corresponding modified sulfopeptides for diagnostic sulfonate loss. This indirect method relies upon specific and complete derivatization of nonsulfonated tyrosines. Alternative MS/MS activation methods, including positive ion metastable atom-activated dissociation (MAD) and metal-assisted electron transfer dissociation (ETD) or electron capture dissociation (ECD) provide varying degrees of sulfonate retention. Sulfonate retention has also been reported following negative ion MAD and electron detachment dissociation (EDD), which also operates in negative ion mode in which sulfonate groups are less labile than in positive ion mode. However, an MS/MS activation technique that can effectively preserve sulfonate groups while providing extensive backbone fragmentation (translating to sequence information, including sulfonated sites) with little to no noninformative small molecule neutral loss has not previously been realized. Here, we report that negative ion CAD, EDD, and negative ETD (NETD) result in sulfonate retention mainly at higher charge states with varying degrees of fragmentation efficiency and sequence coverage. Similar to previous observations from CAD of sulfonated glycosaminoglycan anions, higher charge states translate to a higher probability of deprotonation at the sulfonate groups thus yielding charge-localized fragmentation without loss of the sulfonate groups. However, consequently, higher sulfonate retention comes at the price of lower sequence coverage in negative ion CAD. Fragmentation efficiency/sequence coverage averaged 19/6% and 33/20% in EDD and NETD, respectively, both of which are only applicable to multiply-charged anions. In contrast, the recently introduced negative ion ECD showed an average fragmentation efficiency of 69% and an average sequence coverage of 82% with complete sulfonate retention from singly- and doubly-deprotonated sulfopeptide anions.     

IR and UV photodissociation as analytical tools for characterizing lipid A structures

The utility of 193-nm ultraviolet photodissociation (UVPD) and 10.6-μm infrared multiphoton dissociation (IRMPD) for the characterization of lipid A structures was assessed in an ion trap mass spectrometer. The fragmentation behavior of lipid A species was also evaluated by activated-electron photodetachment (a-EPD), which uses 193-nm photons to create charge reduced radicals that are subsequently dissociated by collisional activation. In contrast to collision-induced dissociation (CID), IRMPD offered the ability to selectively differentiate product ions with varying degrees of phosphorylation because of the increased photoabsorption cross sections and thus dissociation of phosphate-containing species. Both 193-nm UVPD and a-EPD yielded higher abundances and a larger array of product ions arising from C-C cleavages, as well as cross-ring and inter-ring glucosamine cleavages, compared to CID and IRMPD, because of high energy, single-photon absorption, and/or radical-directed dissociation. UVPD at 193 nm also exhibited enhanced cleavage between the amine and carbonyl groups on the 2- and 2'-linked primary acyl chains. Lastly, UVPD of phosphorylethanolamine-modified lipid A species resulted in preferential cleavage of the C-O bond between ethanolamine and phosphate, enabling the selective identification of this modification.     

Infrared multiphoton dissociation for quantitative shotgun proteomics

We modified a dual-cell linear ion trap mass spectrometer to perform infrared multiphoton dissociation (IRMPD) in the low-pressure trap of a dual-cell quadrupole linear ion trap (dual-cell QLT) and perform large-scale IRMPD analyses of complex peptide mixtures. Upon optimization of activation parameters (precursor q-value, irradiation time, and photon flux), IRMPD subtly, but significantly, outperforms resonant-excitation collisional-activated dissociation (CAD) for peptides identified at a 1% false-discovery rate (FDR) from a yeast tryptic digest (95% confidence, p = 0.019). We further demonstrate that IRMPD is compatible with the analysis of isobaric-tagged peptides. Using fixed QLT rf amplitude allows for the consistent retention of reporter ions, but necessitates the use of variable IRMPD irradiation times, dependent upon precursor mass to charge (m/z). We show that IRMPD activation parameters can be tuned to allow for effective peptide identification and quantitation simultaneously. We thus conclude that IRMPD performed in a dual-cell ion trap is an effective option for the large-scale analysis of both unmodified and isobaric-tagged peptides.     

Application of ion trap-MS with H/D exchange and QqTOF-MS in the identification of microbial degradates of trimethoprim in nitrifying activated sludge

In this work, the identification of two microbial degradation products of the antimicrobial trimethoprim (290 Da) is described. The structural elucidation of the metabolites, which were produced by nitrifying activated sludge bacteria in a small-scale laboratory batch reactor, was accomplished by electrospray ionization-ion trap mass spectrometry conducting consecutive fragmentation steps (MS(n)) combined with H/D-exchange experiments. Although one metabolite corresponded to alpha-hydroxytrimethoprim (306 Da), oxidation of the aromatic ring within the diaminopyrimidine substructure was determined for the second degradate (324 Da). Accurate mass measurements of the two metabolites were provided by a hybrid quadrupole time-of-flight-mass spectrometer operated in MS/MS mode. With absolute mass errors of <5 mDa, it allowed us to confirm the proposed elemental composition for the protonated precursor ions as well as for a series of fragment ions that were previously identified by ion trap mass spectrometry. The study emphasized the potential of nitrifying activated sludge bacteria for breaking down an environmentally relevant pharmaceutical that is otherwise poorly degradable by a bacterial community encountered in conventional activated sludge.     

Enabling MALDI-FTICR-MS/MS for high-performance proteomics through combination of infrared and collisional activation

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is a central tool for proteomic analysis, yet the singly protonated tryptic peptide ions produced by MALDI are significantly more difficult to dissociate for tandem mass spectrometry (MS/MS) than the corresponding multiply protonated ions. In order to overcome this limitation, current proteomic approaches using MALDI-MS/MS involve high-energy collision-induced dissociation (CID). Unfortunately, the use of high-energy CID complicates product ion spectra with a significant proportion of irrelevant fragments while also reducing mass accuracy and mass resolution. In order to address the lack of a high-resolution, high mass accuracy MALDI-MS/MS platform for proteomics, Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and a recently developed MS/MS technique termed CIRCA (for combination of infrared and collisional activation) have been applied to proteomic analysis. Here, CIRCA is shown to be suitable for dissociating singly protonated tryptic peptides, providing greater sequence coverage than either CID or infrared multiphoton dissociation (IRMPD) alone. Furthermore, the CIRCA fragmentation spectra are of sufficient quality to allow protein identification based on the MS/MS spectra alone or in concert with the peptide mass fingerprint (PMF). This is accomplished without compromising mass accuracy or mass resolution. As a result, CIRCA serves to enable MALDI-FTICR-MS/MS for high-performance proteomics experiments.     

Amplification of infrared multiphoton dissociation efficiency in a quadruple ion trap using IR-active ligands

A strategy for increasing the efficiency of infrared multiphoton dissociation (IRMPD) in a quadrupole ion trap (QIT) is described. IR-active ligands (IRALs) are incorporated into noncovalent complexes of the type [M2+(analyte) IRAL]+, where M is a transition metal such as copper or cobalt and IRAL is an auxiliary ligand with an IR-active phosphonate functional group. The complexes are formed via self-assembly in solution directly prior to ESI-MS analysis. We demonstrate this new IRMPD approach for the structural characterization of flavonoids. The fragment ions obtained by IRMPD are similar to those obtained by CAD and allow facile isomer differentiation of flavonoids. Fourier transform infrared absorption attenuated total reflectance (FTIR-ATR) and energy-variable CAD experiments indicate that the high IRMPD efficiencies stem from the very large IR absorptivities of the IR-active ligands.     

Stable-isotope trapping and high-throughput screenings of reactive metabolites using the isotope MS signature

A highly efficient method has been developed to detect and identify reactive metabolites, using stable-isotope trapping combined with ESI-MS/MS neutral loss scanning. A mixture of glutathione (GSH, gamma-glutamylcysteinylglycine) and the stable-isotope labeled compound (GSX, gamma-glutamylcysteinylglycine-(13)C(2)-(15)N) was used at an equal molar ratio to trap reactive metabolites generated in microsomal incubations. Samples resulting from incubations were cleaned and concentrated by SPE, followed by LC-MS/MS analyses using constant neutral loss scanning for 129 Da (the gamma-glutamyl moiety) to detect formed GSH conjugates. Unambiguous identification of glutathione adducts was greatly facilitated by the presence of a unique MS signature of a prominent isotopic doublet that differs in mass by 3 Da. Further structural characterization of conjugates was achieved with high confidence by subsequently acquiring MS/MS spectra that were featured by neutral losses of 75 and 129 Da for GSH adducts and 78 and 129 Da for isotopic GSX adducts. The reliability of this method was vigorously validated using a number of compounds known to form reactive metabolites. Superior sensitivity was demonstrated by the capability of the current approach to identify reactive metabolites at low abundance. Because of the unique isotopic MS signature, ultrafast analyses of reactive metabolites were accomplished by direct injection of cleaned samples into mass spectrometers for neutral loss scanning. More importantly, this study has demonstrated the feasibility of the current method for completely automated detection of reactive metabolites via computer-assisted pattern recognition.