Highly Efficient and Enantioselective Iridium‐Catalyzed Asymmetric Hydrogenation of N‐Arylimines

A catalytic method employing the cationic iridium‐(S_c,R_p)‐DuanPhos [(1R,1′R,2S,2′S)‐2,2′‐di‐tert‐butyl‐2,2′,3,3′‐tetrahydro‐1H,1′H‐1,1′‐biisophosphindole] complex and BARF {tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} counterion effectively catalyzes the enantioselective hydrogenation of acyclic N‐arylimines with high turnover numbers (up to 10,000 TON) and excellent enantioselectivities (up to 98% ee), achieving the practical synthesis of chiral secondary amines.     

Highly Active and Selective Semihydrogenation of Alkynes with the Palladium Nanoparticles‐Tetrabutylammonium Borohydride Catalyst System

Palladium nanoparticles are prepared from palladium(II) acetate and 2 equivalents of potassium tert‐butoxide in the presence of 4‐octyne. The palladium nanoparticles‐tetrabutylammonium borohydride system shows excellent catalytic activity and selectivity in the semihydrogenation of alkynes to the [(Z)‐]alkenes. The hydrogenation of 4‐octyne is conducted with the catalyst system at a substrate‐to‐palladium molar ratio of 10,000–200,000 under 8 atm of hydrogen to give (Z)‐4‐octene in>99% yield. Isomerization and over‐reduction of the Z‐alkene are very slow even after consumption of the alkyne.     

Iridium‐Catalyzed Enantioselective Hydrogenation of Cyclic Imines

A catalytic complex made from [Ir(COD)Cl]₂ [di‐μ‐chloro‐bis(1,5‐cyclooctadiene)diiridium(I)] precursor and (S,S)‐f‐Binaphane ((R,R)‐1,1′‐bis{(R)‐4,5‐dihydro‐3H‐dinaphtho[1,2‐c:2′,1′‐e]phosphepino}ferrocene) ligand effectively catalyzed the enantioselective hydrogenation of cyclic imines with high reactivity and good enantioselectivity.     

Preparation of Optically Enriched 3‐Hydroxy‐3,4‐dihydroquinolin‐2(1H)‐ones by Heterogeneous Catalytic Cascade Reaction over Supported Platinum Catalyst

The development of a novel heterogeneous catalytic asymmetric cascade reaction for the synthesis of tetrahydroquinolines from 2‐nitrophenylpyruvates is reported. Optically enriched 3‐hydroxy‐3,4‐dihydroquinolin‐2(1H)‐ones are prepared by enantioselective hydrogenation of the activated keto group over a Cinchona alkaloid‐modified Pt catalyst, reduction of the nitro group and spontaneous cyclization cascade. Acceleration of the enantioselective hydrogenation of the activated keto group over the catalyst modified by Cinchona alkaloids ensured high tetrahydroquinolinone selectivities. The scope of the reaction was checked using twelve substrates. Both yields and enantioselectivities were significantly influenced by the nature and position of the substituents on the phenyl ring. Substituents adjacent to the nitro group considerably increased the product yield, due to their effect on the nitro group′s reduction rate; however, had only a limited effect on enantioselectivities.     

Enantioselective Synthesis of (−)‐CP‐55940 via Ruthenium‐ Catalyzed Asymmetric Hydrogenation of Ketones

A new and efficient catalytic asymmetric synthesis of the potent cannabinoid receptor agonist (−)‐CP‐55940 has been developed by using ruthenium‐catalyzed asymmetric hydrogenation of racemic α‐aryl ketones via dynamic kinetic resolution (DKR) as a key step. With RuCl₂‐SDPs/diamine [SDPs=7,7′‐bis(diarylphophino)‐1,1′‐spirobiindane] catalysts the asymmetric hydrogenation of racemic α‐arylcyclohexanones via DKR provided the corresponding cis‐β‐arylcyclohexanols in high yields with up to 99.3% ee and >99:1 cis‐selectivities. Both ethylene ketal group at the cyclohexane ring and ortho‐methoxy group at the phenyl ring of the substrates 6 have little effect on the selectivity and reactivity of the hydrogenations. Based on this highly efficient asymmetric ketone hydrogenation, (−)‐CP‐55940 was synthesized in 13 steps (the longest linear steps) in 14.6% overall yield starting from commercially available 3‐methoxybenzaldehyde and 1,4‐cyclohexenedione monoethylene acetal.     

Thiosemicarbazone Salicylaldiminato‐Palladium(II)‐Catalyzed Mizoroki–Heck Reactions

Four tridentate thiosemicarbazone salicylaldiminato‐palladium(II) complexes of the general formula [Pd(saltsc‐R)PPh₃] [saltsc=salicylaldehyde thiosemicarbazone; R=H ( 1 ), 3‐tert‐butyl ( 2 ), 3‐methoxy ( 3 ), 5‐chloro ( 4 )], have been evaluated as catalyst precursors for the Mizoroki–Heck coupling reaction between a variety of electron‐rich and electron‐poor aryl halides and olefins. The palladium complexes (0.1–1 mol% loading) were found to effectively catalyze these reactions with high yields being obtained when aryl iodides and aryl bromides were utilized. The effects of base, catalyst loading, reaction temperature and reaction time on the catalytic activity of the most active complex were also investigated.     

Oxime Palladacycle‐Catalyzed Suzuki–Miyaura Alkenylation of Aryl,Heteroaryl, Benzyl,and Allyl Chlorides under Microwave Irradiation Conditions

A simple new protocol for the palladium‐catalyzed Suzuki–Miyaura cross‐coupling of organic chlorides under microwave irradiation is presented. Deactivated aryl and heteroaryl chlorides are efficiently cross‐coupled with alkenylboronic acids and potassium alkenyltrifluoroborates using the 4,4′‐dichlorobenzophenone oxime‐derived palladacycle 1b as precatalyst in 0.1 to 0.5 mol% palladium loading, tris(tert‐butyl)phosphonium tetrafluoroborate {[HP(t‐Bu)₃]BF₄} as ligand, tetra‐n‐butylammonium hydroxide as cocatalyst, and potassium carbonate as base in N,N‐dimethylformamide at 130 °C under microwave irradiation conditions. Under these conditions, styrenes, stilbenes, and alkenylarenes are obtained in good to high yields, and with high regio‐ and diastereoselectivities in only 20 min. The reported protocol is also very efficient for the regioselective alkenylation of benzyl and allyl chlorides to afford allylarenes and 1,4‐dienes.     

Catalytic Asymmetric Hydrogenation of α‐Arylcyclohexanones and Total Synthesis of (−)‐α‐Lycorane

An efficient catalytic asymmetric hydrogenation of racemic α‐arylcyclohexanones with an ethylene ketal group at the 5‐position of the cyclohexane ring via dynamic kinetic resolution has been developed, giving chiral α‐arylcyclohexanols with two contiguous stereocenters with up to 99% ee and >99:1 cis/trans‐selectivity. Using this highly efficient asymmetric hydrogenation reaction as a key step, (−)‐α‐lycorane was synthesized in 19.6% overall yield over 13 steps from commercially available starting material.     

MOP‐Type Binaphthyl Phosphite and Diamidophosphite Ligands and Their Application in Catalytic Asymmetric Transformations

Monodentate phosphite and diamidophosphite ligands have been developed based on O‐methyl‐BINOL. These chiral ligands are easy to prepare from readily accessible phosphorylating reagents – (S_a or R_a)‐2‐chlorodinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepine and (2R,5S)‐2‐chloro‐3‐phenyl‐1,3‐diaza‐2‐phosphabicyclo[3.3.0]octane. The new ligands have demonstrated excellent enantioselectivity in the palladium‐catalysed allylic substitution reactions of (E)‐1,3‐diphenylallyl acetate with sodium p‐toluenesulfinate (up to 99 % ee), pyrrolidine (up to 97 % ee), dipropylamine (up to 95 % ee) and dimethyl malonate (up to 99 % ee). In the palladium‐catalysed deracemization of ethyl (E)‐1,3‐diphenylallyl carbonate, up to 96 % enantioselectivity has been achieved. The diamidophosphite ligands have exhibited very good enantioselectivity in the Rh‐catalysed asymmetric hydrogenation of dimethyl itaconate (up to 90 % ee).     

Superbase‐Catalyzed [4+2] Cycloaddition of Acetylenes to 3,6‐Di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine: A Facile Synthesis of 3,6‐Di(pyrrol‐2‐yl)pyridazines

Acetylenes undergo the [4+2] cycloaddition to 3,6‐di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine in the potassium hydroxide/dimethyl sulfoxide or potassium tert‐butoxide/dimethyl sulfoxide systems (80 °C, 2.5–4 h) to afford (after extrusion of the nitrogen molecule from the intermediate) 3,6‐di(pyrrol‐2‐yl)pyridazines in up to 73% yield, while under non‐catalytic conditions this reaction does not take place. This unusual result substantially extends the scope of synthetic application and mechanistic diversity of the Diels–Alder reaction. The step‐wise mechanisms involving the formation of [OH/tetrazine]⁻ or [t‐BuO/tetrazine]⁻ anionic intermediate complexes or cycloaddition of tetrazine to the acetylide anion are considered.     

Synthesis of Amido‐N‐imidazolium Salts and their Applications as Ligands in Suzuki–Miyaura Reactions: Coupling of Hetero‐ aromatic Halides and the Synthesis of Milrinone and Irbesartan

A new catalytic system based on palladium‐amido‐N‐heterocyclic carbenes for Suzuki–Miyaura coupling reactions of heteroaryl bromides is described. A variety of sterically bulky, amido‐N‐imidazolium salts were synthesized in high yields from the corresponding anilines. This catalytic system effectively promoted Suzuki–Miyaura couplings of heteroaryl bromides and chlorides with a range of boronic acids to give the corresponding aryl compounds in high yield. The yield was increased with increasing steric bulkiness of the substituted group. Especially, 1‐(2,6‐diisopropylphenyl)‐3‐N‐(2,4,6‐tri‐tert‐butylphenylacetamido)imidazolium bromide ( 4bc ) exhibited 850,000 TON in the coupling reaction of 2‐bromopyridine and phenylboronic acid. In addition, pharmaceutical compounds such as milrinone and irbesartan were synthesized via Suzuki–Miyaura coupling using sterically bulky, amido‐N‐imidazolium salt ( 4bc ) as a ligand.     

Evaluation of Aromatic Amination Catalyzed by Palladium on Carbon: A Practical Synthesis of Triarylamines

A heterogeneous palladium on carbon (Pd/C)‐catalyzed coupling between amines and aromatic halides including aromatic chlorides has been achieved using sodium tert‐butoxide (NaO‐t‐Bu) and 1,1′‐bis(diphenylphosphino)ferrocene (dppf) as a ligand in cyclopentyl methyl ether (CPME). The use of potassium tert‐butoxide (KO‐t‐Bu) in place of NaO‐t‐Bu brought about the benzyne‐mediated aromatic amination even without Pd/C and dppf, giving a mixture of regioisomers when 4‐substituted bromobenzenes were employed as the substrate. The combination of Pd/C, dppf, NaO‐t‐Bu could be utilized for the syntheses of a broad range of triarylamines by replacing CPME with mesitylene which can provide a higher reaction temperature. The Pd/C could be quantitatively recovered and reused until at least the fourth cycle without any loss in catalytic activity. The quite low leaching of palladium (<1.1%) was demonstrated by an inductively coupled plasma‐atomic emission spectrometric analysis.     

A Palladium Wall Coated Microcapillary Reactor for Use in Continuous Flow Transfer Hydrogenation

Herein we describe the preparation of a novel continuous flow multi‐channel microreactor in which the internal surface has been functionalised with a palladium coating, enabling its use in catalytic heterogeneous liquid‐phase reactions. Simple chemical deposition techniques were used to immobilise palladium(0) on the channel wall surface of a polymeric multi‐capillary extrudate made from ethylene‐vinyl alcohol copolymer. The Pd coating of the microcapillaries has been characterised by mass spectrometry and light and electron microscopy. The functional activity of the catalytic Pd layer was tested in a series of transfer hydrogenation reactions using triethylsilane as the hydrogen source.     

Ruthenium‐Catalyzed Asymmetric Hydrogenation of β‐Keto‐ enamines: An Efficient Approach to Chiral γ‐Amino Alcohols

A highly efficient and enantioselective hydrogenation of unprotected β‐ketoenamines catalyzed with ruthenium(II) dichloro{(S)‐(−)‐2,2′‐bis[di(3,5‐xylyl)phosphino]‐1,1′‐binaphthyl}[(2S)‐(+)‐1,1‐bis(4‐methoxyphenyl)‐3‐methyl‐1,2‐butanediamine] {Ru[(S)‐xylbinap][(S)‐daipen]Cl₂} has been successfully developed. This methodology provides a straightforward access to free γ‐secondary amino alcohols, which are key building blocks for a variety of pharmaceuticals and natural products, with high yields (>99%) and excellent enantioselectivities (up to 99% ee) in all cases.     

Quest for Efficient Catalysts based on Zinc tert‐Butyl Peroxides for Asymmetric Epoxidation of Enones: C2‐ vs C1‐Symmetric Auxiliaries

Zinc tert‐butyl peroxide‐based catalysts for the asymmetric epoxidation of enones using tert‐butyl hydroperoxide as an oxidant have been developed. A comparative study of chiral monoanioninc N,N′‐bidentate ligands, C₂‐symmetric bisoxazolinates and C₁‐symmetric enaminooxazolinates, revealed excellent performance of C₁‐symmetric auxiliary ligands on catalytic asymmetric epoxidation of enones (up to 96% yield, 91% ee).

     

Enantioselective Cyanosilylation of Ketones with Amino Acid/BINAP/Ruthenium(II)‐Lithium Phenoxide Catalyst Systems

Enantioselective reactions of simple ketones, α,α‐ and β,β‐dialkoxy ketones, and α‐alkoxy ketones with trimethylsilyl cyanide catalyzed by the bimetallic systems of amino acid/BINAP/ruthenium(II) complexes and lithium phenoxide have been studied [BINAP=2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl]. The Ru(PhGly)₂(BINAP)‐lithium phenoxide system showed high enantioselectivity for the reaction of acetophenone derivatives to afford the cyanated products in up to 90% ee [PhGly=phenylglycinate]. For the cyanosilylation of dialkoxy ketones and α‐alkoxy ketones, the Ru(t‐Leu)₂(BINAP)‐lithium phenoxide system exhibited the best catalyst performance to produce the cyanohydrin derivatives in up to 99% ee and 98% ee, respectively [t‐Leu=tert‐leucinate]. The excellent catalytic activity resulted in complete conversion in the reaction with a substrate‐to‐catalyst molar ratio (S/C) of 10,000 in the best cases.     

A General Approach to the Synthesis of β2‐Amino Acid Derivatives via Highly Efficient Catalytic Asymmetric Hydrogenation of α‐Aminomethylacrylates

A new strategy was developed for the synthesis of a valuable class of α‐aminomethylacrylates via the Baylis–Hillman reaction of different aldehydes with methyl acrylate followed by acetylation of the resulting allylic alcohols and S_N2′‐type amination of the allylic acetates. Asymmetric hydrogenation of these diverse olefinic precursors using rhodium(Et‐Duphos) catalysts provided the corresponding β²‐amino acid derivatives with excellent enantioselectivities and exceedingly high reactivities (up to >99.5% ee and S/C=10,000). The first hydrogenation of (Z)‐configurated substrates was studied for the synthesis of β²‐amino acid derivatives. The high influence of the substrate geometry and steric hindrance on the reactivity and enantioselectivity was also disclosed for this reaction. This protocol provides a highly practical, facile and scalable method for the preparation of optically pure β²‐amino acids and their derivatives under mild reaction conditions.     

Novel Palladium‐on‐Carbon/Diphenyl Sulfide Complex for Chemoselective Hydrogenation: Preparation,Characterization, and Application

A diphenyl sulfide immobilized on palladium‐on‐carbon system, Pd/C[Ph₂S], was developed to achieve the highly chemoselective hydrogenation of alkenes, acetylenes, azides, and nitro groups in the presence of aromatic ketones, halides, benzyl esters, and N‐Cbz protective groups. Instrumental analyses of the heterogeneous catalyst demonstrated that diphenyl sulfide was embedded on Pd/C via coordination of its sulfur atom to palladium metal or physical interaction with graphite layers of the activated carbon. The catalyst could be recovered and reused at least five times without any significant loss of the reactivity.     

Third‐Generation Amino Acid Furanoside‐Based Ligands from d‐Mannose for the Asymmetric Transfer Hydrogenation of Ketones: Catalysts with an Exceptionally Wide Substrate Scope

A modular ligand library of α‐amino acid hydroxyamides and thioamides was prepared from 10 different N‐tert‐butyloxycarbonyl‐protected α‐amino acids and three different amino alcohols derived from 2,3‐O‐isopropylidene‐α‐d ‐mannofuranoside. The ligand library was evaluated in the half‐sandwich ruthenium‐ and rhodium‐catalyzed asymmetric transfer hydrogenation of a wide array of ketone substrates, including simple as well as sterically demanding aryl alkyl ketones, aryl fluoroalkyl ketones, heteroaromatic alkyl ketones, aliphatic, conjugated and propargylic ketones. Under the optimized reaction conditions, secondary alcohols were obtained in high yields and in enantioselectivities up to >99%. The choice of ligand/catalyst allowed for the generation of both enantiomers of the secondary alcohols, where the ruthenium‐hydroxyamide and the rhodium‐thioamide catalysts act complementarily towards each other. The catalytic systems were also evaluated in the tandem isomerization/asymmetric transfer hydrogenation of racemic allylic alcohols to yield enantiomerically enriched saturated secondary alcohols in up to 98% ee. Furthermore, the catalytic tandem α‐alkylation/asymmetric transfer hydrogenation of acetophenones and 3‐acetylpyridine with primary alcohols as alkylating and reducing agents was studied. Secondary alcohols containing an elongated alkyl chain were obtained in up to 92% ee.

     

Enantioselective Hydrogenation of N‐Acetyldehydroamino Acids over Supported Palladium Catalysts

The enantioselective hydrogenation of two N‐acetyldehydroamino acids over Cinchona alkaloid‐modified, supported palladium catalysts has been studied. Moderate enantioselectivities, up to 36 %, were obtained in the hydrogenation of 2‐acetamidocinnamic acid over cinchonidine‐modified Pd/TiO₂ under low hydrogen pressure. Increase in the pressure or use of benzylamine as additive led to a gradual decrease in the enantiomeric excess and eventually inversion of the sense of the enantioselectivity. On the contrary, the optical purity of the product resulting from the hydrogenation of 2‐acetamidoacrylic acid was significantly increased by addition of benzylamine to the reaction mixture. Enantiomeric excess values up to 58 % and 60 % were obtained over Pd/Al₂O₃ modified by cinchonidine and cinchonine, respectively. These optical purities are the best obtained in the hydrogenation of dehydroamino acid derivatives over chirally modified heterogeneous metal catalysts.