共查询到20条相似文献,搜索用时 78 毫秒
1.
高压电气设备绝缘监测可提高电力系统运行的安全性。随着电网容量的增加,高压电气设备绝缘监测面临着新的挑战。通过详细介绍高压电气设备绝缘在线监测技术,探讨了变电站高压电气设备绝缘在线监测系统的应用问题,以供相关单位参考。 相似文献
2.
多路数字绝缘电阻测试仪的设计 总被引:1,自引:0,他引:1
为了准确可靠地实现电气设备绝缘电阻多路巡回检测,提出了基于PC/104总线的数字绝缘电阻测试仪的结构和系统硬件、软件设计方案;系统选择反激式单片开关电源设计方案,产生250V直流测试电压;采用光电微电子继电器开关电路,检测24路绝缘电阻;采用线性隔离放大电路,提高系统安全性;实现了多路绝缘电阻的巡回检测和自动量程转换功能,绝缘故障时准确报警;实验结果表明,该仪表满足测量多路绝缘电阻的要求,缩短了测试时间,提高了测试效率,运行性能良好. 相似文献
3.
4.
针对SF6绝缘电气设备运行和维护中存在的问题,在对SF6绝缘电气设备异常状态下气体分解产物分析的基础上,提出了SF6绝缘电气设备分解产物在线监测方法,研制了SF6绝缘电气设备分解产物在线监测系统,实时监测SF6纯度及SO2含量,实现了SF6绝缘电气设备健康状况远程监测功能。系统试验和应用证明,该在线监测系统测量精度能够很好的满足SF6绝缘电气设备分解产物在线监测的需求。 相似文献
5.
多参数电气设备绝缘微机智能化在线监测 总被引:1,自引:0,他引:1
分析了获取不同类型电气设备绝缘信号的特点,研制了相应的传感器和多参数微机绝缘智能化在线监测系统,通过实际运行表明,传感器性能稳定,监测系统数据采集和测量可靠。 相似文献
6.
为了提升电气设备绝缘监测效率与电气设备监测准确率,本文设计了一个基于遥测技术的变电站高压电气设备绝缘自动监测系统。首先对变电站高压电气设备绝缘自动监测系统结构进行设计,采用K-means无监督分类法划分变电站高压电气设备绝缘状态类型,依据曼哈顿距离方法确定电气设备绝缘状态特征类别;构建绝缘介质的并联等效电路,计算电气设备介质损耗;通过傅立叶级数分析方法确定变电站高压电气设备绝缘状态,利用遥测技术确定电流、电压的各次谐波分量,实现变电站高压电气设备绝缘自动监测。实验结果表明,本文方法能够有效提升变电站高压电气设备绝缘自动监测效率。 相似文献
7.
8.
季节性人口流动导致用电负荷短期增加,引发10kV油浸式配电变压器过载运行甚至烧毁等故障,从而引发客户投诉问题。本文结合贵州区域内配变过载情况,综合考虑配变过载能力、影响过载能力的因素、过载运行导致的风险和绝缘寿命损失,总结出配变过载运行的基本特征,并提出了通过过电流温升试验方法验证其过载能力的思路和方法。通过现场试验验证了该方法的可行性,为快速处理配变过载运行提供依据。根据植物绝缘油具有良好电气性能、高燃点、原料来源广泛和可再生等优势,对使用植物绝缘油替换矿物绝缘油来提升配变过载能力的进行了验证,分析了更换绝缘油前后的负载性能情况,并从短期、中期和长期治理提出了建议。 相似文献
9.
本文介绍了一种新型的高绝缘油流电荷密度测试仪。首先介绍BSO晶体传感器的原理,结构,然后详细阐述测试仪的结构及消除光源光强漂移引起的测量误差的方法。由于这种测试仪采用光信号,对测试仪器和被测物起到了很好的隔离作用,适用于电力系统及石化系统高绝缘油静电荷量测试。 相似文献
10.
配电站中的故障电气设备的工作温度会处于高于其正常工作温度的状态,易造成火灾。设计了一种非接触式的实时高温预警系统。系统利用长波红外相机对被测试目标进行非接触式灰度成像,基于LabVIEW上位机实时采集图像并对图像数据进行处理,从而得到所拍摄电气设备实时工作温度。若此温度值高于电气设备安全工作的最高温度值,下位机报警,工作人员可根据系统所成图像确定故障位置,进而提前排除安全隐患。测试结果表明:系统运行稳定、操作简便。系统能够有效地对电站中的电气设备运行状态进行实时监测和精确预警,极大程度地降低了工作人员的安全风险,提高了工作效率。 相似文献
11.
目的:解决在FLASH中导入声音的问题.方法:对FLASH不支持的声音格式采取音频压缩的方法.结果:可成功将压缩后的声音文件导入到FLASH中.结论:在FLASH中使用声音可以使FLASH动画具有良好的动画效果. 相似文献
12.
13.
本文对于金属切削这一生产过程中所出现的不稳定问题,利用频率特性法中的奈氏判据,对其进行分析,从而找出消除自激振荡和达到切削过程绝对稳定的条件 相似文献
14.
人体测量学并不是现代社会的产物。有着很长发展历史的人体比例理论中就包含了现代人体测量学的基本内容,尽管其还不够系统完整,但至少说明了在艺术创作中诞生的人体比例理论对现代人体测量学的影响。并随着时间的推移而不断的完善发展,为现代人体测量学的系统提出奠定了坚实的基础。 相似文献
15.
David Smith 《AI & Society》2003,17(1):1-11
The paper questions the ability of current university systems to respond appropriately to the complex demands of an Information
Economy. It argues that new relationships between creative subjects and technology require new thinking about the nature and
purpose of universities per se. In particular, attention is drawn to the growing involvement of the private sector in higher
education. It is argued that it may not be appropriate to think of the `university of the future' in terms of current public
sector and quasi public sector institutions, but rather in terms of an emporium, based on an international trade in educational
services, and with the `University' as we now understand it occupying the functions of licensing, quality assurance and cultural
custodianship.
Accepted: 25 June 2002 相似文献
16.
熊林 《数字社区&智能家居》2007,3(14):428-429
虚拟化技术是当今服务器技术的一个主流方向,也是一项在计算机领域具有革命性意义的技术.作为x86架构体系下虚拟化技术的领军者-VMware,在技术上有其独到之处.研究VMware的技术与应用,对探知其优秀的技术特点,了解其成熟的产品体系有着现实意义. 相似文献
17.
All titanium alloys are highly reactive in the molten condition and so are usually melted in a water-cooled copper crucible to avoid contamination using processes such as Induction Skull Melting (ISM). These provide only limited superheat which, coupled with the surface turbulence inherent in most conventional mould filling processes, results in entrainment defects such as bubbles in the castings. To overcome these problems, a novel tilt-casting process has been developed in which the mould is attached directly to the ISM crucible holding the melt and the two are then rotated together to achieve a tranquil transfer of the metal into the mould. From the modelling point of view, this process involves complex three-phase flow, heat transfer and solidification. In this paper, the development of a numerical model of the tilt-casting process is presented featuring several novel algorithm developments introduced into a general CFD package (PHYSICA) to model the complex dynamic interaction of the liquid metal and melting atmosphere. These developments relate to the front tracking and heat transfer representations and to a casting-specific adaptation of the turbulence model to account for an advancing solid front. Calculations have been performed for a 0.4 m long turbine blade cast in a titanium aluminide alloy using different mould designs. It is shown that the feeder/basin configuration has a crucial influence on the casting quality. The computational results are validated against actual castings and are used to support an experimental programme. Although fluid flow and heat transfer are inseparable in a casting, the emphasis in this paper will be on the fluid dynamics of mould filling and its influence on cast quality rather than heat transfer and solidification which has been reported elsewhere. 相似文献
18.
19.
从品牌战略管理的高度出发,阐述了品牌传播符号语意的重要作用、常用方法以及要注意的问题,并以哈雷摩托为例进行了分析。 相似文献
20.
杨革 《数字社区&智能家居》2006,(14)
每一种媒体都有自身的长处,对某种特定的教学和学习有效。同样,每种媒体又不可避免地存在局限性,不利于某些教学和学习。因此,多媒体不是一种全能的媒体,也不可能代替传统媒体。现代媒体与传统媒体在教学中应相互补充,取长补短,相得益彰。 相似文献