Characterization of phosphorus availability in selected New Zealand grassland soils

Appropriate evaluation of phosphorus (P) availability in soil is aprerequisite for ensuring the productivity and long-term sustainable managementof agroecosystems. Fifteen soils presently under grassland were collected fromdifferent areas of New Zealand and soil P availability was assessed by isotopicexchange kinetics (IEK) and related to P forms obtained by chemicalfractionation (sequential extraction). Concentrations of total P determined inthe 15 soils ranged from 375 to 2607 mg kg^–1(mean1104 mg kg^–1). Mean concentrations of inorganic P(Pi) extracted by sequential extraction with ammonium chloride, sodiumbicarbonate, sodium hydroxide (first), hydrochloric acid and sodium hydroxide(second) were 1.2, 41, 205, 113 and 23 mg kg^–1,respectively. Mean concentrations of organic P (Po) extracted by sodiumbicarbonate, sodium hydroxide (first) and sodium hydroxide (second) were 133,417 and 105 mg kg^–1, respectively. Similarly,results from IEK analysis showed that the intensity (water soluble Pi (Cp)),capacity (R/r₁ and n), and quantity (E value,isotopically exchangeable P pools (E_{1 min},E_{1 min–24 h},E_{24 h–3 m},E_{>3 m})) factors varied markedlyamongst soils. Thus Cp concentrations ranged from 0.02–1.90 mgL^–1, while concentrations of Pi determined in theE_{1 min}, E_{1 min–24},E_{24 h–3 m},E_{>3 m} pools were 2–29 (mean 10), 10–321(76), 11–745 (152), and 8–498 (177) mgkg^–1, respectively. The corresponding values forR/r₁ and n were 1.0–17.7 (mean 4.5) and0.10–0.50 (mean 0.37), respectively. Regression analysis revealed that Cpconcentrations were exponentially and inversely proportional toR/r₁,n and P sorption index (PSI)(R²=0.806(P<0.01), 0.852 (P<0.01) and 0.660(P<0.01), respectively). Cluster analysis identified twobroad groups of soils, namely those with low P availability (mean Cp0.11 mg L^–1, E_{1 min} Pi 5mg kg^–1, R/r₁ 3.9,n 0.44), and those with high P availability (mean Cp 1.33mg L^–1, E_{1 min} Pi 20mg kg^–1, R/r₁ 1.21,n 0.16). Correlation analysis indicated thatE_{1 min} P i was significantly correlated with bicarbonateextractable Pi (BPi, R²=0.37,P<0.05) and thesum of ammonium chloride extractable Pi (APi) and BPi(R²=0.38,P<0.05). However, the concentration of Pi in theE_{1 min} pool was generally lower than the sum of APi andBPi. Sodium hydroxide extractable Pi (N₁Pi) was significantlycorrelated with the sum of the E_{1 min},E_{1 min–24 h},E_{24 h–3 m} Pi pools(R₂=0.974, P<0.01),indicating that N₁Pi fractioncould be considered as representing potentially available soil P for pasturespecies over a growing season.     

Synthesis of ternary Li–Mn–O phase at a temperature of 260 ∘C and electrochemical lithium insertion into the oxide

A lithium–manganese oxide, Li _x MnO₂ (x=0.30.6), has been synthesized by heating a mixture (Li/Mn ratio=0.30.8) of electrolytic manganese dioxide (EMD) and LiNO₃ in air at moderate temperature, 260 C. The formation of the Li–Mn–O phase was confirmed by X-ray diffraction, atomic absorption and electrochemical measurements. Electrochemical properties of the Li–Mn–O were examined in LiClO₄-propylene carbonate electrolyte solution. About 0.3 Li in Li _x MnO₂ (x=0.30.6) was removed on initial charging, resulting in characteristic two discharge plateaus around 3.5V and 2.8V vs Li/Li⁺. The Li _x MnO₂ synthesized by heating at Li/Mn ratio=0.5 demonstrated higher discharge capacity, about 250mAh (g of oxide)^–1 initially, and better cyclability as a positive electrode for lithium secondary battery use as compared to EMD.     

Terpolymerization: A Review

The terpolymer, poly (styrene-acrylonitrile-linalool) has been synthesized by free radical solution polymerization of the electron-donating monomers, linalool (optically active) (LIN) and styrene (STY) with the electron-accepting monomer, acrylonitrile (AN) using benzoyl peroxide (BPO) as an initiator and xylene as diluent at 75°C for 40 minutes. The system follows ideal kinetics. Rp [BPO]^0.5 [LIN]^1.0 [STY]^1.0 [AN]^1.0. ¹H-NMR spectrum of terpolymer has peaks at 7.8–8.0 due to –OH group of LIN and at 7.0–7.7 due to phenyl group of styrene. ¹³C-NMR spectrum of terpolymer has peaks at ppm = 119–120 of –CN, ppm = 129–136 of C₆H₅ and ppm = 75–77 of –C–OH. Bands at 3075 cm^–1, 2240 cm^–1 and at 3500 cm^–1 are observed in the FTIR spectrum of terpolymer, indicates the presence of phenyl, cyanide and hydroxy group respectively. The reactivity ratios, determined by the Kelen–Tüdös method [r ₁ for AN and r ₂ for (LIN + STY)] are 0.11 and 0.005 respectively. It is concluded that the system agrees with theoretical treatment and gives the relative reactivity ratio k ₁₂/k ₁₃=0.748 by treatment of the free radical propagating mechanism. The overall activation energy is 38 kJ/mol. The molecular weight of terpolymer is determined by gel permeation chromatography technique. The value of _w/ > _n is 1.36.     

Active-oxygen species on non-reducible rare-earth-oxide-based catalysts in oxidative coupling of methane

From supplementary in situ Raman spectroscopic studies of active-oxygen species on non-reducible rare-earth-oxide-based catalysts in the oxidative coupling of methane (OCM) and structural adaptability considerations, further support has been obtained for our proposal that there may be an active and elusive precursor (of O₂ ^– and O₂ ^2– adspecies), most probably O₃ ^2– formed from reversible redox coupling of an O₂ adspecies at an anionic vacancy with a neighboring O^2– in the surface lattice. This active precursor may initiate H abstraction from CH₄ and be itself converted to OH^–+O₂ ^–, or it may abstract an electron from the oxide lattice and be converted to O₂ ^2–+O^–. The prospect of developing this type of OCM catalysts is discussed.     

Copolymerization of 4-cyanophenyl acrylate with methyl methacrylate: synthesis, characterization and determination of monomer reactivity ratios

A novel acrylic monomer, 4-cyanophenyl acrylate (CPA) was synthesized by reacting 4-cyanophenol dissolved in methyl ethyl ketone with acryloyl chloride in the presence of triethylamine as a catalyst. Copolymers of CPA with methyl methacrylate (MMA) at different composition was prepared by free radical solution polymerization at 70 ± 1 °C using benzoyl peroxide as an initiator. The copolymers were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The solubility tests were checked in various polar and non polar solvents. The molecular weight and polydispersity indices of the copolymers were estimated by using gel permeation chromatography. The glass transition temperature of the copolymers increases with increases MMA content. The thermal stability of the copolymer increases with increases in mole fraction of CPA content in the copolymer. The copolymer composition was determined by using ¹H-NMR spectra. The monomer reactivity ratios determined by the application of linearization methods such Fineman–Ross (r ₁ = 0.535, r ₂ = 0. 0.632), Kelen–Tudos (r ₁ = 0.422, r ₂ = 0.665) and extended Kelen–Tudos methods (r ₁ = 0.506, r ₂ = 0. 0.695).     

Synthesis, Characterization and Anti-microbial Activity of Oligo-N-2-aminopyridinylsalicylaldimine and Some Oligomer-metal Complexes

The oxidative polycondensation and optimum reaction conditions of N-2-aminopyridinylsalicylaldimine using air oxygen, H₂O₂ and NaOCl were determined in an aqueous alkaline solution between 40–90°C. Oligo-N-2-aminopyridinylsalicylaldimine (OAPSA) was characterized by using ¹H-NMR, FT-IR, UV-vis and elemental analysis. N-2-aminopyridinylsalicylaldimine was converted to oligomer by oxidizing in an aqueous alkaline medium. The number average molecular weight (M _n), weight average molecular weight (M _w) and polydispersity index (PDI) values were found to be 7487 gmol^–1, 7901 gmol^–1 and 1.06, respectively. According to these values, 70% of N-2-aminopyridinylsalicylaldimine turned into oligo-N-2-aminopyridinylsalicylaldimine. During the polycondensation reaction, a part of the azomethine (–CH=N–) groups oxidized to carboxylic (–COOH) group. Besides, the structure and properties of oligomer-metal complexes of oligo-N-2-aminopyridinyl salicylaldimine (OAPSA) with Cu (II), Ni (II), and Co (II) were studied by FT-IR, UV-vis DTA, TG and elemental analysis. Anti-microbial activities of the oligomer and its oligomer-metal complexes have been tested against C. albicans, L. monocytogenes, B. megaterium, E. coli, M. smegmatis, E. aeroginesa, P. fluorescen and B. jeoreseens. Also, according to the TG and DTA analyses, oligo-N-2-aminopyridinylsalicylaldimine and its oligomer-metal complexes were found to be stable thermo-oxidative decomposition. The weight loss of OAPSA found to be 20%, 50% and 98% at 350°C, 535°C and 1000°C, respectively.     

Novel and Ideal Zirconium-Based Dense Membrane Reactors for Partial Oxidation of Methane to Syngas

A novel and ideal dense catalytic membrane reactor for the reaction of partial oxidation of methane to syngas (POM) was constructed from the stable mixed conducting perovskite material of BaCo_0.4Fe_0.4Zr_0.2O_3– and the catalyst of LiLaNiO/-Al₂O₃. The POM reaction was performed successfully. Not only was a short induction period of 2 h obtained, but also a high catalytic performance of 96–98% CH₄ conversion, 98–99% CO selectivity and an oxygen permeation flux of 5.4–5.8 mlcm^–2min^–1 (1.9–2.0 molm^–2S^–1Pa^–1) at 850°C were achieved. Moreover, the reaction has been steadily carried out for more than 2200 h, and no interaction between the membrane material and the catalyst took place.     

Synthesis and Properties of Soluble and Light-Colored Poly(amide-imide-imide)s Based on Tetraimide-Dicarboxylic Acid Condensed from 4,4'-Oxydiphthalic Anhydride, 2,2-Bis[4-(4-aminophenoxy)phenyl]sulfone, and m-Aminobenzoic Acid, and Various Aromatic Diamines

A new-type of tetraimide-dicarboxylic acid (I) was synthesized starting from the ring-opening addition of m-aminobenzoic acid (m-ABA), 4,4'-oxydiphthalic anhydride (ODPA), and 2,2-bis[4-(4-aminophenoxy)phenyl]sulfone (BAPS) at a 2:2:1 molar ratio in N-methyl-2-pyrrolidone (NMP), followed by cyclodehydration to the diacid I. A series of soluble and light-colored poly(amide-imide-imide)s (III _a-j) was prepared by triphenyl phosphite-activated polycondensation from the tetraimide-diacid I with various aromatic diamines (II _a-j). All films cast from DMAc had cutoff wavelengths shorter than 390 nm (379–390 nm) and had b ^* values between 24.17–35.50; these polymers were much lighter in color than those of the alternating trimellitimide series. All of the polymers were readily soluble in a variety of organic solvents such as NMP, N,N-dimethyl acetamide, N,N-dimethylformamide, dimethyl sulfoxide, and even in less polar m-cresol and pyridine. Polymers III _a-j afforded tough, transparent, and flexible films, which had a strength at break ranging from 93 to 118 MPa, elongation at break from 8 to 11%, and initial modulus from 2.2 to 2.8 GPa, and some films showed yield points in the range of 95–111 MPa at stress–strain curves. The glass transition temperature of the polymers was recorded at 240–268°C. They had 10% weight loss at a temperature above 540°C and left more than 55% residue even at 800°C in nitrogen.     

Copolymerization of 2-(4-tert-butylphenoxy)-2-oxo-ethyl Methacrylate with Methyl Methacrylate and Styrene: Synthesis, Characterization, and Monomer Reactivity Ratios

A tertierbutylphenoxy group containing methacrylate based monomer 2-(4-tert-butylphenoxy)-2-oxo-ethyl methacrylate (TBPOEMA) was synthesized by reacting 4-tertierbutylphenyl chloroacetate (TBPClAcO) with sodium methacrylate in acetonitrile. TBPClAcO was prepared by reacting tertierbutylphenol dissolved in benzene with chloroacetylchloride. The free-radical-initiated copolymerization of TBPOEMA, with methyl methacrylate (MMA) and styrene (ST) was carried out in dimethylsulphoxide (DMSO) solution at 65°C using 2,2-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer TBPOEMA and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition obtained from the ¹H-NMR spectra led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Finemann–Ross and Kelen–Tüdös linear methods and the Behnken nonlinear least-squares method. The analysis of reactivity ratios revealed that MMA and ST are more reactive than TBPOEMA, and copolymers formed are statistical in nature. The molecular weights _w and _n) and polydispersity index of the polymers were determined using gel permation chromagtography. Thermogravimetric analysis of the polymers reveal that the thermal stability of the copolymers increases with an increase in the mole fraction of TBPOEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of TBPOEMA in the copolymers. The apparent thermal decomposition activation energies (E _d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

On the Possibility of Forming Complexes with the Participation of O2– Ions in Melts and Glasses of the Na2O–SiO2–Cu2O System

The structural role of copper ions in melts (glasses) of the Na₂O–SiO₂–Cu₂O–CuO system is analyzed in the framework of the acid–base concept with due regard for the geometric (the radius ratio for Cu²⁽¹⁾⁺ and O^2– ions) and energy (the mean enthalpies of the Cu²⁽¹⁾⁺–O bonds) factors. It is demonstrated that copper ions in the structure fulfill the function of modifier cations. In these melts, the Cu¹⁺–Cu²⁺ redox equilibrium can be described without regard for the formation of [Cu²⁽¹⁾⁺O_4/2]^2(3)– ionic complexes (which could be incorporated into the structure of silicon–oxygen anions) and [Cu²⁺O _b/k ]^{2 – b/k} polyhedra providing the interaction between Cu²⁺ ions and anions. The influence of the formation of these polyhedra on the redox equilibrium is considered within the formalism of chemical thermodynamics. The composition dependence of the oxygen ion exponent pO is measured by an electromotive force (emf) technique. The ratio between the numbers of copper atoms with different valences is determined by chemical analysis. The experimental data obtained are in agreement with the theoretical inferences.     

Pulse electrodeposition of titanium on carbon steel in the LiF–NaF–KF eutectic melt

Electrodeposition of titanium was carried out in the K₃TiF₆–LiF–NaF–KF melt using both direct (DC) and unipolar pulse current (PC) techniques. Dense and smooth titanium coatings were obtained by PC plating at 750 °C whereas DC plating led to rough and dendritic deposits. The best results were obtained using a 100C cm^–2 pulse charge and a cathodic current density of 50 and 75mA cm^–2. The cathodic current efficiency was in the range 60–65%. The titanium deposits obtained under such conditions behaved similarly to CP-titanium in NaCl and HNO₃ solutions at room temperature.     

Impedance spectroscopy study of electrochromism in sputtered iridium oxide films

The a.c. impedance response of sputtered iridium oxide films (SIROFs) was studied at room temperature in 1M H₂SO₄ between 1mHz and 50mHz. The spectra were recorded as a function of applied potential in the range of electrochromic properties from 0.0 to 1.0V vs SCE and before and after an electrochemical treatment consisting of alternatively colouring and bleaching the electrode. The spectra were analysed with help of an equivalent circuit. Between 0.4 and 1.0V, the spectra can be interpreted as due to electrochemical proton insertion in a single phased compound. From the data, hydrogen chemical diffusion coefficients with values ranging from 2 × 10^–8 to 1.1 × 10^–7cm²s^–1 are found. It is shown that this parameter increases fourfold after the cycling treatment and significantly decreases with the amount of inserted hydrogen. Below 0.4V spectrum changes are observed over the intermediate frequency range studied, indicating some changes of the interfacial reactivity which remain to be clarified.     

Synthesis and Characterization of Polyaspartimides Containing Anisyl Moiety

New class of aromatic bismaleimides containing anisyl group were synthesized from bis(4-amino 3,5-dimethyl phenyl) anisyl methane and maleic anhydride via bismaleamic acid as an intermediate followed by cyclodehydration to bismaleimides. The structure was confirmed by FTIR, ¹H-NMR and elemental analysis. Further, a series of polyaspartimides were synthesized by addition reaction of bismaleimide (BMDA) with various diamines. The polymers were characterized by IR and elemental analysis. The polymers exhibit good solubility in organic solvents such as NMP, DMF and DMSO. They exhibit good thermal stability. T _g of polyaspartimides are in the range of 125–278°C and T _10% weight loss are in the range of 398–476°C.     

AlEt3-H2O-H3PO4 catalyzed polymerizations of 1, 4-dioxan-2-one

Summary A new catalytic system, AlEt₃-H₂O-H₃PO₄(C), was successfully used as a catalyst for synthesizing poly (1,4-dioxan-2-one) (PPDO) in bulk via the ring-opening polymerization (ROP) of 1,4-dioxan-2-one (PDO). The effects of the molar ratio of monomer to catalyst (M/C), the polymerization temperature (T), the reaction time (t) and the water content of monomer PDO (W) were studied systematically. AlEt₃-H₂O-H₃PO₄ has been proved to be a very effective catalyst for ROP of PDO. High molecular weights of PPDO can be obtained under following conditions: T=80 °C, M/C=1311–1573, t=8–10 hours and W<80 ppm.     

Evaluating and quantifying the liming potential of phosphate rocks

The liming potential of phosphate rock was evaluated with theoreticalcalculations and quantified by laboratory titration and soil incubation. Threeanions present in the carbonate apatite structure of phosphate rock that canconsume protons and cause an increase in pH when dissolved from apatite arePO₄ ^3–, CO₃ ^2–, andF^–. The pKa for HF is so low that F^– has verylittle effect on increasing pH. The pKa for 2 protons onH₂PO₄ ^– and H₂CO₃are sufficiently high enough to cause an increase in pH withPO₄ ^3– and CO₃ ^2–releasedinto solution if the pH range is between 4 and 6. Because of the greater molarquantity of PO₄ ^3– compared toCO₃ ^2–, PO₄ ^3– exerts agreater affect on the liming potential of P rock. For a variety of phosphaterocks with a axes ranging from 9.322 to 9.374 Å in the carbonate apatitestructure, the theoretical % calcium carbonate equivalence (CCE) rangesfrom 59.5 to 62%. With the presence of gangue carbonate minerals from2.5to 10% on a weight basis in the phosphate rocks, the theoretical%CCE ranges from 59.5 to 63.1%. Use of AOAC method 955.01 forquantifying the %CCE of North Carolina phosphate rock (NCPR) and Idahophosphate rock (IDPR) resulted in %CCE ranging from 39.9 to 53.7%which were less than the theoretical values. The lower values measured in theAOAC method was presumed to be due to formation of CaHPO₄ orCaHPO₄·2H₂O precipitates which would result inlessthan 2 protons neutralized per mole of PO₄ ^3–released from carbonate apatite. The highly concentrated solution formed in themethod was considered not indicative of a soil solution and thus determined%CCE values would be suspect. A soil incubation study was conducted todetermine a more appropriate %CCE value in a soil environment usingCopper Basin, Tennessee soil with a soil pH of 4.2. Agricultural limestone,NCPR, IDPR, and a granulated IDPR were added to 100 g of soil atrates of 0.1, 0.3, 1, 3, and 10 g/kg soil, incubated for 105 daysat field moisture capacity, and analyzed for changes in soil pH and P. The%CCE of each phosphate rock addition was determined using limestone as astandard curve. The relationship between %CCE and % dissolved Pfollowed a quadratic model where%CCE=8.47+0.0078(%dissolved P)² (r²=0.84).At 0% dissolved P, the model predicted 8.47% CCE which wasprobably due to gangue carbonate minerals. The experimental model showedqualitative agreement with theory showing increased liming ability withincreased dissolved P from the P rock. However, the model showed lower%CCE than theoretical calculations when %P dissolved ranged from20 to 60%.     

Selective Modification of Pt Active Sites on Pt–Au/C Catalysts Prepared by Surface Redox Reactions

This study focused on the selective deposition of Au⁰ onto (111), (100) faces and (111)/(100) edges of cuboctahedral Pt particles present on the Pt/C(graphite) model system. The Pt–Au/C catalysts were prepared by novel surface redox methods involving the direct reduction (DR) of AuCl ₄ ^– species onto the Pt particles or reducing these species on the Pt–H interface, i.e., the refilling (RE) method. The presence of Au on the Pt particles was verified by means of high-resolution energy dispersive spectroscopy (EDS), and, after treatment at 300°C in H₂, the formation of crystalline Au⁰ aggregates was verified by X-ray wide-angle diffraction; further treatments at 500°C in H₂ led to a true Pt–Au solid solution. The Monte Carlo simulation methods indicated the selective deposition of Au⁰ onto the (111)/(100) edges of the Pt cuboctahedral particles when the relative Au concentration varied from 10 to 50 wt% Au. The catalytic conversion of n-heptane on the Pt–Au/C (DR and RE solids) catalysts presented an oscillatory behavior with respect to Pt/C, indicating modification of the active Pt ensembles, driven by the energy released during the exothermic n-C₇ dehydrogenation and cracking reactions, which should enhance the Au⁰ mobility at the Pt particle surface level.     

Calculation of the Viscosity of Glass-Forming Melts: VI. The R2O–B2O3–SiO2and RO–B2O3–SiO2Ternary Borosilicate Systems

A method for calculating the viscosity from composition and temperature for melts in the R _m O _n –B₂O₃–SiO₂systems is proposed. The change in the concentrations of structural groups depending on the melt composition is taken into account in calculations. The results of calculations are compared with the experimental data available in the literature on the viscosity of 1200 melts with the use of the SciGlass information system. The root-mean-square deviation between the experimental and calculated characteristic temperatures varies from 30 K (for the glass transition temperature and the Littleton point) to 50 K (for a viscosity of 10⁴P).     

Influence of Hydroxyvalerate Content on the Crystallization Kinetics of Poly(hydroxybutyrate-co-hydroxyvalerate)

Influence of hydroxyvalerate (HV) content on the crystallization kinetics of hydroxybutyrate (HB) units in random poly(hydroxybutyrate-co-hydroxyvalerate) (P(HB-co-HV)) copolymers has been studied by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that the crystallization kinetics of HB units was strongly affected by the presence of the ethyl side chain of HV units whether under the non-isothermal or isothermal crystallization conditions. The spherulitic growth rate (G) and overallall crystallization rate (k _n ) of HB units decreased with increasing HV content. Both G and k _n exhibited the maxima, G ^max and k _n ^max, which showed a gradual shift toward lower temperatures with increasing HV content, which may be attributed to the depression in the equilibrium melting point (T _m ⁰) and nucleation factor (K _g). The temperature corresponding k _n ^max was different from G ^max due to the depression of nucleation rate with the degree of undercooling was more susceptible than that of the growth rate. According to the Lauritzen–Hoffman theory of secondary nucleation, the crystallization of HB units in P(HB-co-HV) copolymers was similar to that of neat PHB as regime III and n=4 growth process.     

Origin of rate bistability in Mn–O/Al2O3 catalysts for carbon monoxide oxidation: role of the Jahn–Teller effect

Peculiarities in catalytic activity in carbon monoxide oxidation as well as some structure, electronic and magnetic properties of the three oxide catalysts, Mn³⁺–O/Al₂O₃ (1), Mn³⁺–O–Fe/Al₂O₃ (Mn-substituted spinel, 2) and -Fe₂O₃/Al₂O₃ (3), were studied by kinetic measurements and by Mössbauer spectroscopy. The catalysts 1 and 2 showed a kinetic bistability with a sharp transition towards more reactive state at 200°C (ignition point). In contrast, for catalyst 3, at 200–250°C, the behavior of reaction rate against temperature did not display noticeable hysteresis. On cooling the catalysts 1 and 2, extinction was observed at about 170 and 120°C, respectively, i.e., at 30–80°C lower than the corresponding ignition points. Proximity of activation energy for the high and low activity (15–19 kJ/mol) for both Mn-containing catalysts suggests an increase in the number of active sites at high temperature with no changes in the reaction mechanism. The considerable difference between Mn-containing catalysts 1, 2 and Fe-containing catalyst 3 may be caused by Jahn–Teller (JT) type distortions of the oxygen polyhedron around Mn³⁺. A significant spontaneous axial bond stretching within the local polyhedron seems to diminish Mn–O binding energy, facilitate the participation of surface oxygen species, O_S, in the oxidation of CO by a redox mechanism and promote oxygen vacancies at the surface that would cause considerable effect on the activity. An increase in the width of the counterclockwise hysteresis loop for the catalyst 2 compared to the catalyst 1 indicates that clusters of mixed spinel provide more active sites and more labile O_S species than clusters of the binary Mn oxide.