共查询到19条相似文献,搜索用时 218 毫秒
1.
为了提高宽带电力线通信系统的通信质量,基于宽带电力线通信系统的基本原理,构建了宽带电力线通信系统的仿真模型。以广东云浮某小区用户电表的实际采集数据作为原始数据,在500 m的四径信道模型下,分别引入了BP神经网络和Elman神经网络进行了通信质量的仿真测试。针对神经网络算法普遍存在的抗噪声性能差的缺点,提出一种基于改进VPGA优化的Elman神经网络用于电力线通信系统解映射模块的数据处理,并进行了仿真测试。实验结果表明,该算法不占用宝贵的频谱资源且实现方便,并且除去信号被噪声淹没等极端恶劣的信道环境以外,均可以显著提高宽带电力线通信系统的通信质量,降低误码率。 相似文献
2.
3.
4.
低压电力线通信技术及性能研究 总被引:3,自引:0,他引:3
提出了低压电力线用于接入技术的网络拓扑模型,分析了既传输电能又传输数据的低压电力线系统的信道特性及电磁兼容性。对电力线通信中被广泛应用的正交频分复用(0FDM)技术的抗干扰特性和抗多径效应性能进行了分析,并对PLC接入性能进行了实验,测试结果表明PLC在恶劣的环境下能提供稳定的宽带性能。 相似文献
5.
分析了低压电力线通信信道的特性,根据其信道特性建立了能体现频率选择性衰落和多径衰落的低压电力线信道模型。针对电力线存在衰减和噪声干扰的问题,在对现有几种电力线载波通信的宽带调制技术原理分析的基础上,使用MATLAB/Simulink软件建立了各技术的宽带电力线通信系统模型,并进行仿真实验,最后采用误码率和信噪比两个指标对各系统模型的性能进行分析比较。 相似文献
6.
7.
为了方便对中压电力线通信调制与编码硬件电路的调试,提出一种基于虚拟仪器技术的中压电力线信道噪声发生器的设计方法,利用该方法设计的噪声发生器可模拟产生电力线信道的背景噪声、随机突发噪声等。本设计利用MATLAB建立符合中压电力线信道噪声特性的噪声模型,以此模型为基础,通过MATLAB与LabVIEW混合编程,基于虚拟仪器采集卡输出参数可变的噪声,并通过功放电路输出。实验结果表明,该噪声发生器能够产生符合信道噪声特性的噪声信号,可以为实验室测试调制与编码硬件电路的性能提供便利。 相似文献
8.
电力线宽带通信是实现电网与电信网、广播电视网、互联网有机融合的有效手段,是支撑智能电网用户侧交互功能的重要技术方向.文章搭建了一个面向智能电网的电力线宽带通信性能测试平台,通过一个视频点播系统来对电力线宽带通信性能进行评估,验证了电力线宽带通信设备对"多网融合"视频点播等服务的支撑能力,分析了影响数据可靠传输的主要因素... 相似文献
9.
10.
跻身未来的电力线通信:(四)宽带PLC的W-OFDM实现 总被引:5,自引:0,他引:5
鉴于电力线通信(PLC)的宽带需求,提出了运用正交频分复用(OFDM)实现宽带PLC的方案,结合PLC信道的复杂特性,在阐述OFDM调制原理及分析研究OFDM的宽带性能之后,构建了一个工程实现框架,并以此作为OFDM系统的计算机仿真模型,由MATLAB仿真所得结果,得出了OFDM技术应用所遇到的高功率均值比(PAPR)值和同步问题的具体解决措施,最后以Intellon公司的INT5130芯片应用为例,给出了一个与PC机USB接口相连的,基于OFDM调制技术的宽带电力Modem设计方案。 相似文献
11.
12.
Kaneko A. Goh T. Yamada H. Tanaka T. Ogawa L. 《IEEE journal of selected topics in quantum electronics》1999,5(5):1227-1236
Planar lightwave circuits (PLCs) are waveguide devices that integrate fiber-matched optical waveguides on silicon or glass substrate to provide an efficient means of interaction for the guided-wave optical signals, PLCs provide various important and functional devices for optical wavelength-division multiplexing, time-division-multiplexing systems, and subscriber networks. This paper reviews the recent progress and future prospects of PLC technologies including arrayed-waveguide grating multiplexers, optical add-drop multiplexers and hybrid optoelectronics integration technologies 相似文献
13.
14.
15.
16.
Information technology offers medical science tools to collect, process, store, and communicate clinical data. Healthcare institutions have adapted standards-based data communication technologies that allow easy implementation of communications infrastructure. As clinical and information technologies have converged, two trends have emerged: the widespread use of commercial off-the-shelf hardware and software and the use of standards-based communication technologies. Technical support for these complex systems requires an integrated, "end-to-end" view and staff who are knowledgeable of both clinical and computer technologies. In this article, examples of new computerized medical devices are discussed as well as the support and support staff implications of the ever-growing influence of IT on clinical systems. 相似文献
17.
TADASHI SUZUKI 《Electrical Engineering in Japan》2017,199(2):47-57
The kHz band power line communication (PLC) is one of the convincing mediums of the communication system for smart meter reading. Data transmission between medium‐voltage (MV) and low‐voltage (LV) points to pass the transformer by PLC is interested. In this paper, the PLC signal propagation characteristics between points of MV at substation and LV at customer are calculated and analyzed. The results show that direct communication between points on MV distribution line and most LV customers is impossible due to large propagation losses at MV–LV transformer and on LV distribution line. 相似文献
18.
19.
低压配电网高速数据通信技术能够实现电力、数据、语音、视频“四网合一”,具有广阔的应用前景。由于传统的电力线载波通信技术难以适应配电网复杂而恶劣的环境,因此,新的通信标准、先进的调制技术和大规模集成电路的研究与应用,日益受到业界的关注。文章从测试和分析配电网高频传输特性入手,论述了正交频分复用技术的理论基础,阐述了基于配电网环境的功率控制、自适应调制、通道均衡、抗符号间干扰等关键技术,并介绍了一个实用化的配电网通信系统。 相似文献