基于多处理机的混合实时任务容错调度

提出了一种混合实时任务容错调度算法．该算法采用Rate Monotonic(RM)算法完成周期任务的静态调度；采用预订处理机时间方法和Earlier Deadline First(EDF)算法动态调度非周期任务；采用主／副版本备份技术确保系统的容错能力．通过充分利用周期任务的剩余处理机时间调度非周期任务和主动备份与被动备份相结合的方法有效地减少了处理机数．仿真结果证明了算法的有效性．     

提高软非周期任务响应性能的调度算法

实时环境中常常既包含硬周期任务,又包含软非周期任务,引入一种改进软非周期实时任务响应时间的算法.已有的解决混合任务调度问题的方法都是基于速率单调（Rate Monotonic）策略的,其中从周期任务“挪用时间”的算法被证明优于其他所有算法.但是,速率单调算法限制了处理器的使用率,从而使周期任务的可“挪用”时间受到限制.最后期限驱动（Deadline Driven）策略DD可使潜在的处理器利用率达到100%.新算法正是在周期任务的调度中适当加入了DD策略,从而使非周期任务的响应时间得以缩短.仿真实验的结果表明,这种算法的性能优于已有的所有算法,而由它所带来的额外开销却不算很高.     

Fault-tolerant rate-monotonic first-fit scheduling inhard-real-time systems

Hard-real-time systems require predictable performance despite the occurrence of failures. In this paper, fault tolerance is implemented by using a novel duplication technique where each task scheduled on a processor has either an active backup copy or a passive backup copy scheduled on a different processor. An active copy is always executed, while a passive copy is executed only in the case of a failure. First, the paper considers the ability of the widely-used rate-monotonic scheduling algorithm to meet the deadlines of periodic tasks in the presence of a processor failure. In particular, the completion time test is extended so as to check the schedulability on a single processor of a task set including backup copies. Then, the paper extends the well-known rate-monotonic first-fit assignment algorithm, where all the task copies, included the backup copies, are considered by rate-monotonic priority order and assigned to the first processor in which they fit. The proposed algorithm determines which tasks must use the active duplication and which can use the passive duplication. Passive duplication is preferred whenever possible, so as to overbook each processor with many passive copies whose primary copies are assigned to different processors. Moreover, the space allocated to active copies is reclaimed as soon as a failure is detected. Passive copy overbooking and active copy deallocation allow many passive copies to be scheduled sharing the same time intervals on the same processor, thus reducing the total number of processors needed. Simulation studies reveal a remarkable saving of processors with respect to those needed by the usual active duplication approach in which the schedule of the non-fault-tolerant case is duplicated on two sets of processors     

基于多核处理器的关联任务并行感知调度算法

关联任务在多核处理器上并行调度所产生的通信时延,会对任务调度长度和处理器利用率造成负面影响,为了改善多核系统对关联任务的处理性能,针对关联任务在多核处理器上的调度特点,提出一种并行感知调度算法。计算各任务与终点间的最长路径值,按照该值的降序来分配任务调度次序,在分配处理器内核时兼顾关联度和任务最早可执行时间,设置最佳匹配评价函数。实验结果表明,与busHEFT和DTSV算法相比,该算法具有更短的任务调度时延、更少的通信量以及更高的处理器利用率。     

实时多处理器系统的动态分批优化调度算法

提出了一种实时多处理器系统的新的高效动态调度算法--动态分批优化调度算法,该算法突破了以往算法中一次只安排一项任务的做法,采用在每次扩充当前局部调度时,按一定规则在待调度的任务集中选取一批任务,对该批任务中的每项任务在每个处理器上运行构造目标函数,将问题转化为非平衡分配问题,一次性为这些任务都安排一个处理器或为每个处理器安排一项任务,使得这种安排具有最好的"合适性",以增大未安排任务的可行性.这种方法极大地提高了算法的调度成功率.同时,为了研究该算法的有效性,对其进行了大量的模拟,分析了一些任务参数的变化对算法调度成功率的影响,并与节约算法的调度成功率进行了比较.模拟结果显示,在节约算法的调度成功率小于10%的约束条件下,该算法的调度成功率大于90%,说明新算法的优势是非常明显的.     

嵌入式操作系统混合任务调度技术与策略研究

针对当前嵌入式系统中时间触发与事件触发混合任务的特点,以μC/OS-II操作系统架构为基础,设计了一种能够同时支持时间触发与事件触发的混合操作系统内核架构。该架构符合OSEK/VDX标准,具有良好的可移植性。针对混合任务调度问题,提出了一种静态周期性可抢占式混合任务调度策略,该策略同时支持中断级与任务级的任务切换,并采用EDF（最早截止时间优先）算法对被抢占的时间触发任务进行恢复,相比OSEKtime OS只能在中断级进行任务切换以及FIFO（先进先出）恢复算法,能够提高系统资源利用率,并最大限度保证任务实时性。实验分析结果表明,所设计的混合操作系统架构移植方便,所提出的混合任务调度策略可行有效,调度过程具有良好的可预测性。     

基于多核处理器的K线程低能耗的任务调度优化算法

针对具有独立DVFS的多核处理器系统,提出了一种K线程低能耗模型的并行任务调度优化算法(Tasks Optimization based on Energy-Effectiveness Model,TO-EEM)。与传统的并行任务节能调度相比,该算法的主要目标是不仅通过降低处理器频率来减少处理器瞬时功耗,而且结合并行任务间的同步互斥所造成的线程阻塞情况,合理分配线程资源来减少线程同步时间,优化并行性能;保证任务在一定的并行加速比性能前提下,提高资源利用率,减少能耗,达到程序能耗和性能之间的折衷。文中进行了大量模拟实验,结果证明提出的任务优化模型算法节能效果明显,能有效降低处理器的功耗,并始终保持线性加速比。     

Overload management in real-time control applications using (m,k)-firm guarantee

Tasks in a real-time control application are usually periodic and they have deadline constraints by which each instance of a task is expected to complete its computation, even in the adverse circumstances caused by component failures. Techniques to recover from processor failures often involve a reconfiguration in which all tasks are assigned to fault-free processors. This reconfiguration may result in processor overload where it is no longer possible to meet the deadlines of all tasks. In this paper, we discuss an overload management technique which discards selected task instances in such a way that the performance of the control loops in the system remain satisfactory even after a failure. The technique is based on the rationale that real-time control applications can tolerate occasional misses of the control law updates, especially if the control law is modified to account for these missed updates. The paper devises a scheduling policy which deterministically guarantees when and where the misses will occur. The paper also proposes a methodology for modifying the control law to minimize the deterioration in the control system behavior as a result of these missed control law updates     

Energy-efficient scheduling of real-time tasks with shared resources

This paper explores the energy-efficient scheduling of real-time tasks on a non-ideal DVS processor in the presence of resource sharing. We assume that tasks are periodic, preemptive and may access to shared resources. When dynamic-priority and fixed-priority scheduling are considered, we use the earliest deadline first (EDF) algorithm and the rate monotonic (RM) algorithm to schedule the given set of tasks. Based on the stack resource policy (SRP), we propose an approach, called blocking-aware two-speed (BATS) algorithm, to synchronize the tasks with shared resources and to calculate appropriate execution speeds so that the shared resources can be accessed in a mutual exclusive manner and the energy consumption can be reduced. Particularly, BATS uses a static low speed to execute tasks initially, and then it switches to a high speed dynamically whenever a task blocks a higher priority task. More specifically, the processor runs at the high speed from the beginning of the blocking until the deadline of the blocked task or the processor becomes idle. In order to guarantee that the deadlines of tasks are met, the static low speed and the dynamic high speeds are derived based on the theoretical analysis of the schedulability of tasks. Compared with existing work, BATS achieves more energy saving because its dynamic high speeds are lower than that of existing work and the processor has less chance to execute tasks at the high speeds. The schedulability analysis and the properties of our proposed BATS are provided in this paper. We also evaluated the capabilities of BATS by a series of experiments, for which we have some encouraging results.     

一种基于分簇复制的DAG任务图调度算法

并行任务调度是影响机群计算效率的关键因素之一，机群环境DAG(Directed Acyclic Graph)任务图调度是一个NP完全问题，只能寻求启发式算法。已有的研究中，图解重构算法在允许任务复制的条件下，通过对DAG图递归分解与子图重构，初步实现了一个可行的调度方案。该文在此基础上，提出了以调度长度增量为依据的任务复制策略，利用该策略调整受制约节点的同簇前驱，解决了任务簇间的时间制约问题，缩短了调度长度；通过合理地选择任务簇进行合并，增大任务簇的粒度，提高了处理器的利用率。提出的以任务簇扩展-合并为特征、以分簇复制为手段的DAG图调度算法，改进和拓展了图解重构方法。实例分析表明本算法复杂度与TDS (Task Duplication Scheduling)相同，但性能更优。     

容错实时任务调度的DSPN建模与分析

复杂系统的形式化描述对新系统的设计以及现有系统的改进与评价都具有十分重要的作用;针对处理机系统容错实时混合任务调度,提出采用确定与随机Petri网进行建模与性能分析;首先,根据任务执行的优先级、周期性、容错性和实时性,将任务分为四类;然后,采用DSPN对任务调度执行过程,不同优先级任务抢占式调度,处理机故障及故障恢复过程进行建模,由此构成处理机系统容错实时任务调度过程的DSPN模型;最后,仿真实验结果表明,在负载相同情况下,处理机利用率基本相同,且具有容错的实时任务调度算法可以有效地降低任务错失率;容错实时任务调度DSPN模型可以为复杂任务调度系统的Petri网建模与分析奠定了基础,并为实际工程应用提供了理论指导。     

Fault-Tolerant Dynamic Rescheduling for Heterogeneous Computing Systems

As the scale and complexity of heterogeneous computing systems grow, failures occur frequently and have an adverse effect on solving large-scale applications. Hence, fault-tolerant scheduling is an imperative step for large-scale computing systems. The existing fault-tolerant scheduling algorithms belong to static scheduling, and they allocate multiple copies of each task to several processors no matter whether processor failures affect the execution of tasks. Such active replication strategies not only waste resource but also sacrifice the makespan. What is more, they cannot guarantee the successful execution of applications. In this paper, we propose a fault-tolerant dynamic rescheduling algorithm named FTDR, which can overcome above drawbacks. FTDR keeps listening to the processor failure, and reschedules the suspended tasks once failures occur. Because FTDR reschedules the tasks that are suspended because of failures, it can tolerate an arbitrary number of failures. Randomly generated DAGs are tested in our experiments. Experimental results show that the proposed algorithm achieves good performance in terms of makespan and resource consumption compared with its direct competitors.     

实时异构系统的动态分批优化调度算法

提出了一种实时异构系统的动态分批优化调度算法,该算法采用的是在每次扩充当前局部调度时,按一定规则在待调度的任务集中选取一批任务,对该批任务中的每项任务在每个处理器上的运行综合各种因素构造目标函数,将问题转化为非平衡分配问题,一次性为这些任务都分配一个处理器或为每个处理器分配一项任务,使得这种分配具有最好的“合适性”,以增大未被调度任务的可行性.这种方法有效地提高了算法调度成功率.同时,为了评估该算法的性能,对其进行了大量的模拟,分析了一些任务参数的变化对算法调度成功率的影响,并与老算法的调度成功率进行了比较.模拟结果显示,新算法优于老算法.     

实时多处理机系统BEST-FIT启发式容错调度

本文从有效利用资源的角度出发,提出了一种以最小化处理机数目为优化目标的Best-Fit启发式容错调度算法。该算法采用主/副版本备份技术和副版本的主动运行方式与被运行方式相结合的方法,将实时任务的主版本和副版本调度到不同处理机上运行;并且按照Best-Fit启发式策略为实时任务主版本寻找“最佳满足”处理机,使尽可能多的实时任务副版本以被动方式运行。算法既保证了系统的实时性和容错性,也节约了处理机。分析和仿真结果均证明了算法的有效性。     

Hybridization of Metaheuristics Based Energy Efficient Scheduling Algorithm for Multi-Core Systems

The developments of multi-core systems (MCS) have considerably improved the existing technologies in the field of computer architecture. The MCS comprises several processors that are heterogeneous for resource capacities, working environments, topologies, and so on. The existing multi-core technology unlocks additional research opportunities for energy minimization by the use of effective task scheduling. At the same time, the task scheduling process is yet to be explored in the multi-core systems. This paper presents a new hybrid genetic algorithm (GA) with a krill herd (KH) based energy-efficient scheduling technique for multi-core systems (GAKH-SMCS). The goal of the GAKH-SMCS technique is to derive scheduling tasks in such a way to achieve faster completion time and minimum energy dissipation. The GAKH-SMCS model involves a multi-objective fitness function using four parameters such as makespan, processor utilization, speedup, and energy consumption to schedule tasks proficiently. The performance of the GAKH-SMCS model has been validated against two datasets namely random dataset and benchmark dataset. The experimental outcome ensured the effectiveness of the GAKH-SMCS model interms of makespan, processor utilization, speedup, and energy consumption. The overall simulation results depicted that the presented GAKH-SMCS model achieves energy efficiency by optimal task scheduling process in MCS.     

Performance of gang scheduling strategies in a parallel system

In this paper we study job scheduling performance in a partitionable parallel system. Jobs consist of parallel tasks scheduled to execute concurrently on processor partitions, where each task starts at the same time and computes at the same pace. The performance of different scheduling schemes is compared over various workloads. The impact of the variability of tasks service time is also studied. Various performance metrics are examined. The objective is to achieve good overall performance and also small scheduling overhead. Simulated results reveal that periodic job scheduling and also scheduling which depends on the number of job insertions in the queue can succeed these goals.     

Energy-aware mixed partitioning scheduling in standby-sparing systems

Previous standby-sparing techniques assume that all tasks don't access to shared resources. In addition, primary tasks and backup tasks are allocated to the primary processor and spare processor respectively. Spare processor schedules tasks with maximum processor speed. Unlike previous techniques, we have studied the problem of minimizing energy consumption and preserving the original reliability for dynamic-priority real-time task set with shared resources in a standby-sparing system. We propose a novel energy-aware mixed partitioning scheduling algorithm (EAMPSA). Earliest deadline first/dynamic deadline modification (EDF/DDM) scheduling scheme is used to ensure that the shared resources can be accessed in a mutual exclusive manner. Uniformly speed is used to the primary processor and the spare processor. In addition, we use the mixed mapping partitioning of primary and backup tasks method to map tasks. A novel method of mapping task is proposed i.e. the tasks which need to access to shared resources are mapped into the primary processor and the tasks which have no resource requirements are mapped into the spare processor. Furthermore, DVS and DPM techniques are used for both primary and backup tasks to save energy. The experimental results show that the EAMPSA algorithm consumes average 55.43% less energy than that of the SSPT algorithm.     

周期性实时任务LLF调度算法改进

为减少松弛度计算和系统调度次数,对周期性实时任务的最低松弛度优先(LLF)调度算法进行了改进。在系统处理过程中引入最低松弛度优先队列,当任务松弛度相同时,开始截止时刻早的任务靠近队首。在任务控制块(TCB)中引入预执行时间,任务被调度以后,如果没有更为紧迫的任务到达,任务执行到预执行时间结束才退出处理器。Matlab仿真试验表明,改进算法有效减少了周期性实时任务的松弛度计算次数和系统调度次数,提高了处理器的利用率。     

计算网格中基于时间均衡的并行粗粒度任务调度算法

考虑网格资源异构、自治、动态等特性,讨论本地用户具有强占优先权情况下的任务调度问题,提出了TBBS(Time-Balancing Based Scheduling Algorithm)算法.建立调度优化模型,以期望完成时间最小为目标选择执行任务的最佳资源组合.以时间均衡策略将任务分解并调度到资源上执行,减少了子任务同步时因等待而产生的延时,获得较好的并行计算性能.采用重复调度策略,适应计算网格中资源的特性.     

An efficient list-based task scheduling algorithm for heterogeneous distributed computing environment

The task scheduling in heterogeneous distributed computing systems plays a crucial role in reducing the makespan and maximizing resource utilization. The diverse nature of the devices in heterogeneous distributed computing systems intensifies the complexity of scheduling the tasks. To overcome this problem, a new list-based static task scheduling algorithm namely Deadline-Aware-Longest-Path-of-all-Predecessors (DA-LPP) is being proposed in this article. In the prioritization phase of the DA-LPP algorithm, the path length of the current task from all its predecessors at each level is computed and among them, the longest path length value is assigned as the rank of the task. This strategy emphasizes the tasks in the critical path. This well-optimized prioritization phase leads to an observable minimization in the makespan of the applications. In the processor selection phase, the DA-LPP algorithm implements the improved insertion-based policy which effectively utilizes the unoccupied leftover free time slots of the processors which improve resource utilization, further least computation cost allocation approach is followed to minimize the overall computation cost of the processors and parental prioritization policy is incorporated to further reduce the scheduling length. To demonstrate the robustness of the proposed algorithm, a synthetic graph generator is used in this experiment to generate a huge variety of graphs. Apart from the synthetic graphs, real-world application graphs like Montage, LIGO, Cybershake, and Epigenomic are also considered to grade the performance of the DA-LPP algorithm. Experimental results of the DA-LPP algorithm show improvement in performance in terms of scheduling length ratio, makespan reduction rate , and resource reduction rate when compared with other algorithms like DQWS, DUCO, DCO and EPRD. The results reveal that for 1000 task set with deadline equals to two times of the critical path, the scheduling length ratio of the DA-LPP algorithm is better than DQWS by 35%, DUCO by 23%, DCO by 26 %, and EPRD by 17%.