Methanol production in an optimized dual-membrane fixed-bed reactor

Coupling reaction and separation in a membrane reactor improves the reactor efficiency and reduces purification cost in the following stages. This paper focuses on modeling and optimization of methanol production in a dual-membrane reactor. In this configuration, conventional methanol reactor is supported by Pd/Ag membrane tubes for hydrogen permeation and alumina–silica composite membrane tubes for water vapor removal from the reaction zone. A steady state heterogeneous one-dimensional mathematical model is developed to predict the performance of this novel configuration. In order to verify the accuracy of the model, simulation results of the conventional reactor is compared with available industrial plant data. The main advantages of the optimized dual-membrane reactor are: higher CO₂ conversion, the possibility of overcoming the limitation imposed by thermodynamic equilibrium, improvement of the methanol production rate and its purity. Genetic algorithm as an exceptionally simple evolution strategy is employed to maximize the methanol production as the objective function. This configuration has enhanced methanol production rate by 13.2% compared to industrial methanol synthesis reactor.     

Dynamic modeling and operability analysis of a dual-membrane fixed bed reactor to produce methanol considering catalyst deactivation

The goal of this research is dynamic operability analysis of dual-membrane reactor considering catalyst deactivation to produce methanol. A dynamic heterogeneous one-dimensional model is developed to predict the performance of this configuration. In this configuration, a conventional reactor has been supported by a Pd/Ag membrane tube for hydrogen permeation and alumina–silica composite membrane tube to remove water vapor from the reaction zone. To verify the accuracy of the considered model, the results of conventional reactor are compared with the plant data. The main advantages of the dual-membrane reactor are: higher catalyst activity and lifetime, higher CO₂ conversion and methanol production.     

Application of hydrogen-permselective Pd-based membrane in an industrial single-type methanol reactor in the presence of catalyst deactivation

This work presents application of palladium-based membranes in a conventional single-type methanol reactor. A novel reactor configuration with hydrogen-permselective Pd and Pd–Ag membrane are proposed. In this configuration the reacting synthesis gas is fed to the shell side of reactor while the high pressure product is routed from recycle stream through tubes of the reactor in a co-current mode with reacting gas. The reacting gas is cooled simultaneously with recycle gas in tube and saturated water in outer shell. The permselective palladium layer on inner tube allows hydrogen to penetrate from the tube side to the reaction side. In this work, the results of two types of novel membrane reactors are compared with a conventional methanol synthesis reactor at identical process conditions. Also the effect of key parameters such as membrane thickness, reaction and tube side pressure, ratio of tube side flow rate to reaction side flow rate on performance of reactor are investigated. The steady-state and quasi-steady-state simulations results show that there are favorable profiles of temperature and methanol mole fraction along the reactor in proposed reactor relative to conventional reactor system. Therefore using this novel configuration in industrial single-type methanol reactor improves methanol production rate.     

Enhancement of Methanol Production in a Membrane Dual‐Type Reactor

In this study, a dynamic model for a membrane dual‐type methanol reactor was developed in the presence of long term catalyst deactivation. The proposed model is used to compare the performance of a membrane dual‐type methanol reactor with a conventional dual‐type methanol reactor. A conventional dual‐type methanol reactor is a shell and tube heat exchanger reactor in which the first reactor is cooled with cooling water and the second one is cooled with synthesis gas. In a membrane dual‐type reactor, the wall of the tubes in the gas‐cooled conventional reactor is covered with a palladium‐silver membrane, which is only permeable to hydrogen. Hydrogen can penetrate from the feed synthesis gas side into the reaction side due to the hydrogen partial pressure driving force. Hydrogen permeation through the membrane shifts the reaction towards the product side according to the thermodynamic equilibrium. The proposed dynamic model was validated against measured daily process data of a methanol plant recorded for a period of four years and a good agreement was achieved. The simulation results show that there is a favorable profile of temperature and activity of the membrane dual‐type reactor relative to single and conventional dual‐type reactor systems. Therefore, the performance of methanol reactor systems improves when a membrane is used in a conventional dual‐type methanol reactor.     

Co‐current and Countercurrent Configurations for a Membrane Dual Type Methanol Reactor

A dynamic model for a membrane dual‐type methanol reactor was developed in the presence of catalyst deactivation. This reactor is a shell and tube type where the first reactor is cooled with cooling water and the second one with feed synthesis gas. In this reactor system, the wall of the tubes in the gas‐cooled reactor is covered with a palladium‐silver membrane which is only permeable to hydrogen. Hydrogen can penetrate from the feed synthesis gas side into the reaction side due to the hydrogen partial pressure driving force. Hydrogen permeation through the membrane shifts the reaction towards the product side according to the thermodynamic equilibrium. Moreover, the performance of the reactor was investigated when the reaction gas side and feed gas side streams are continuously either co‐current or countercurrent. Comparison between co‐current and countercurrent mode in terms of temperature, activity, methanol production rate as well as permeation rate of hydrogen through the membrane shows that the reactor in co‐current configuration operates with lower conversion and also lower permeation rate of hydrogen but with longer catalyst life than does the reactor in countercurrent configuration.     

Membrane/sorption-enhanced methanol synthesis process: Dynamic simulation and optimization

In this study, a dynamic mathematical model of a Membrane-Gas-Flowing Solids-Fixed Bed Reactor (Membrane-GFSFBR) with in-situ water adsorption in the presence of catalyst deactivation is proposed for methanol synthesis. The novel reactor consists of water adsorbent and hydrogen-permselective Pd-Ag membrane. In this configuration feed gas and flowing adsorbents are both fed into the outer tube of the reactor. Contact of gas and fine solids particles inside packed bed results in selective adsorption of water from methanol synthesis which leads to higher methanol production rate. Afterwards, the high pressure product is recycled to the inner tube of the reactor and hydrogen permeates to the outer tube which shifts the reaction towards more methanol production. Dynamic simulation result reveals that simultaneous application of water adsorbent and hydrogen permeation in methanol synthesis process contributes to a significant enhancement in methanol production. The notable advantage of Membrane-GFSFBR is the continuous adsorbent regeneration during the process. Moreover, a theoretical investigation has been performed to evaluate the optimal operating conditions and to maximize the methanol production in Membrane-GFSFBR using differential evolution (DE) algorithm as a robust method. The obtained optimization result shows there are optimum values of inlet temperatures of gas phase, flowing solids phase, and shell side under which the highest methanol production can be achieved.     

Contribution to emission reduction of CO2 by a fluidized-bed membrane dual-type reactor in methanol synthesis process

In this work, a fluidized-bed membrane dual-type reactor was evaluated for CO₂ removal in methanol synthesis process. The feed synthesis gas is preheated in the tubes of the gas-cooled reactor and flowing in a counter-current mode with reacting gas mixture in the shell side. Due to the hydrogen partial pressure driving force, hydrogen can penetrate from feed synthesis gas into the reaction side through the membrane. The outlet synthesis gas from this reactor is fed to tubes of the water-cooled packed-bed reactor and the chemical reaction is initiated by the catalyst. The methanol-containing gas leaving this reactor is directed into the shell of the gas-cooled reactor and the reactions are completed in this fluidized-bed side. A two-phase dynamic model in bubbling regime of fluidization was developed in the presence of long-term catalyst deactivation. This model is used to compare the removal of CO₂ in a FBMDMR with a conventional dual-type methanol synthesis reactor (CDMR) and a membrane dual-type methanol synthesis reactor (MDMR). The simulation results show a considerable enhancement in the CO₂ conversion due to have a favourable profile of temperature and activity along the fluidized-bed membrane dual-type reactor relative to membrane and conventional dual-type reactor systems.     

MODELING AND SIMULATION OF A NONISOTHERMAL CATALYTIC MEMBRANE REACTOR

A two-dimensional nonisothermal mathematical model has been developed to simulate a tube-and-shell configuration, catalytic membrane reactor. The three-layer membrane consists of an inert large-pore support, an o₂ semipermeable dense perovskite layer and a porous catalytic layer. The model is applied to the simulation of the partial oxidation or methane to syngas (oxyreforming). The membrane reactor simultaneously supplies oxygen to the catalytic reaction along the reactor length, and separates oxygen from the air feed, using a dense perovskite layer which is a mixed conductor, thus allowing rapid oxygen permeation without the use of an external circuit. Two configurations of catalytic membrane reactors are simulated, for both bench-scale and industrial-scale conditions. Comparisons are made to the conventional fixed-bed reactor, and to membrane reactors which are isothermal, adiabatic or wall-cooled. The simulation results imply that the temperature rise in exothermic partial oxidation reactions may be mitigated substantially by the use of a dense membrane reactor,     

Theoretical Investigation of a Pd‐membrane Reactor for Methanol Synthesis

A numerical study is performed in order to evaluate the performance and optimal operating conditions of a palladium membrane reactor for methanol synthesis. A novel reactor configuration with a Pd wall, which is perm‐selective to hydrogen, has been proposed. In this configuration the reactants are added to the tube side while pure hydrogen is added to the shell side, as a result, the hydrogen diffuses across the membrane from the shell side to the tube side. In this membrane reactor, hydrogen penetrates to the reaction side in order to maintain a suitable hydrogen level in the whole length of the reactor and shift the equilibrium reaction. The effects of different parameters on the methanol output mole fraction were investigated in the co‐current mode. These parameters were membrane thickness, reaction side flow rate, reaction side pressure, shell side pressure and H₂/CO₂ ratio in the feed.     

Economic feasibility of silica and palladium composite membranes for industrial dehydrogenation reactions

This article addresses the economic feasibility of silica and palladium composite membranes for gaseous dehydrogenation reaction schemes. Unlike other methodologies addressed so far, this work presents the economic assessment of dehydrogenation reaction schemes using a conceptual design based simulation methodology for the comparative economic assessment of membrane reactors with conventional reactors. The suggested methodology is applied to two industrially prominent reaction schemes namely styrene (from ethylbenzene) and propylene (from propane) production using silica and palladium composite membrane reactors. Various sub-cases studied in this work include the influence of membrane area per reaction zone volume, reaction zone temperature, reaction and permeation zone pressure, membrane thickness and sweep gas flow rate on process economics. Based on this work, the propylene production scheme is evaluated to provide 60–70% excess profits using membrane reactors when compared with the conventional reactor based technology. However, the gross profit profiles for both conventional reactor and membrane reactor configurations have been found to be similar for styrene production case. For all cases, the cost contribution of membranes and other auxiliary equipment is estimated not to exceed 20% of the total costs. In addition, similar economic performance has been observed for both silica and palladium membranes. Based on these studies, it has been concluded that the industrial applicability of membrane reactors is economically suitable for those dehydrogenation reactions that enable significant conversion enhancement with respect to the conventional reactor technologies.     

Dynamic simulation of a cascade fluidized-bed membrane reactor in the presence of long-term catalyst deactivation for methanol synthesis

In this work, a dynamic model for a cascade fluidized-bed hydrogen permselective membrane methanol reactor (CFBMMR) has been developed in the presence of long-term catalyst deactivation. In the first catalyst bed, the synthesis gas is partly converted to methanol in a water-cooled reactor, which is a fluidized-bed. In the second bed, which is a membrane assisted fluidized-bed reactor, the reaction heat is used to preheat the feed gas to the first bed. This reactor configuration solves some observed drawbacks of new conventional dual type methanol reactor (CDMR) and even fluidized-bed membrane dual type methanol reactor (FBMDMR) such as pressure drop, internal mass transfer limitations, radial gradient of concentration and temperature in both reactors. A dynamic two-phase theory in bubbling regime of fluidization is used to model and simulate the proposed reactor. The proposed model has been used to compare the performance of a cascade fluidized-bed membrane methanol reactor with fluidized-bed membrane dual-type methanol reactor and conventional dual-type methanol reactor. The simulation results show a considerable enhancement in the methanol production due to the favorable profile of temperature and activity along the CFBMMR relative to FBMDMR and CDMR systems.     

Optimal conditions of isobutane dehydrogenation in radial flow moving bed hydrogen-permselective membrane reactors to enhance isobutene and hydrogen production

In the isobutane dehydrogenation process, coupling reaction and separation and optimization of the intensified process can improve the isobutane conversion and selectivity, reduce operational costs and lets to produce pure hydrogen. In this research, the radial flow moving bed reactors in the Olefex technology have been supported by Pd–Ag membrane plate to remove hydrogen from the reaction zone. The reactions occur in the tube side and the hydrogen is permeated from the reaction zone to the sweep gas stream. The proposed configuration has been modeled heterogeneously based on the mass and energy conservation laws considering reaction networks. To prove the accuracy of the considered model, the simulation results of the conventional process have been compared against available plant data. The Genetic algorithm as an effective method in the global optimization has been considered to optimize the operating condition of membrane reactors to enhance isobutene productivity. In this optimal configuration, the isobutene production has been enhanced about 3.7%.     

Theoretical study of a membrane reactor for the water gas shift reaction under nonisothermal conditions

A simulation of a membrane reactor for the water gas shift reaction is carried out by means of a 1D pseudo‐homogeneous nonisothermal mathematical model. The composite membrane consists of a dense layer of Pd (selective to H₂) supported over a porous ceramic layer. The effect of temperature, overall heat‐transfer coefficient, and mode of operation on the membrane reactor performance and stability are analyzed, and the results obtained are compared with those corresponding to a reactor with no hydrogen permeation. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

糠醛在Pd-Cu膜反应器中催化加氢合成糠醇

以糠醛催化加氢合成糠醇作为模型反应,采用共沉淀法制备的Cu/MgO-K₂O作为催化剂,考察了Pd-Cu膜反应器的加氢性能.膜反应器由双套管组成,采用分别进料的方式操作.即糠醛气化后由载气带入中心膜管的催化床层,而氢气则进入管壳层通过Pd-Cu合金膜渗透到反应区.在不同条件下分别进行糠醛催化加氢反应,考察了糠醛转化率、产品糠醇选择性和收率,并与传统的共进料填充床反应器进行比较.研究结果显示,膜反应器比传统的填充床反应器具有产品收率高、选择性好和副产物少的特点.此外,本文结合催化剂的组成、结构和表面形貌的表征对催化剂的催化活性和失活行为进行了讨论.     

Analysis of process integration and intensification of enzymatic cellulose hydrolysis in a membrane bioreactor

Enzymatic cellulose hydrolysis has been studied for many years, generating rich literatures and knowledge in respect to the underlying reaction mechanism, reaction kinetics, and bioreactor systems. This paper attempts to offer some additional information and new understanding of how reaction kinetics and reactor productivity can be improved in a process involving simultaneous reaction and product separation using a purpose‐built membrane reactor with a single combined reaction zone and separation zone. Different operating strategies of batch, fed batch and continuous cellulose hydrolysis were investigated with intermittent or simultaneous removal of products (reducing sugars) to reduce enzyme inhibition and improve reactor productivity. The effect of continuous and selective product removal, reduced enzyme inhibition and higher enzyme concentration in retention were examined for the potential benefit in process integration and intensification in order to lower the high process cost of the enzymatic hydrolysis process, mainly due to slow reaction kinetics and expensive enzymes. A mathematical model was offered to account for the effect of selective product (reducing sugars) separation, permeate flux, reduced cellulase inhibition, dynamic structural change of the solid substrate and possible shear deactivation of the enzyme. Computer analysis was also carried out to analyse the quasi‐steady state of the reaction intermediates in order to gain an insight into the reaction mechanism in simultaneous reaction and separation systems. Some original analysis and simulation of the effect of membrane separation parameters on the overall reactor performance is offered, including the effect of membrane selectivity (rejection coefficient) and flux. Copyright © 2005 Society of Chemical Industry     

Production of pure hydrogen and more valuable hydrocarbons from ethane on a novel highly active catalyst system with a Pd-based membrane reactor

Production of pure hydrogen and more valuable hydrocarbons from ethane on a novel highly active catalyst system with a Pd-based membrane reactor is studied at the mild reaction temperatures of 773–858 K and a wide SV range of ethane. Re/HZSM-5 is highly active for upgrading of ethane for production of hydrogen and more valuable hydrocarbons such as ethylene and aromatics (BTX) even at the relatively lower temperatures. Formation rates of the more valuable hydrocarbons and hydrogen are remarkably enhanced by selective permeation of hydrogen product in the membrane reactor. It is also found that formation rate of methane as a side product is effectively suppressed by selective permeation of hydrogen though the membrane tubes. Therefore, both ethane conversion and selectivity for production of hydrogen and more valuable hydrocarbons such as ethylene and BTX are greatly enhanced by application of the membrane reactor.     

A photocatalytic membrane reactor for gas-phase reactions using porous titanium oxide membranes

Photocatalytic membrane reactors using porous titanium oxide membranes having pore sizes of several nanometers were utilized for a gas-phase reaction of methanol. Air mixed with methanol (MeOH) vapor, the concentration of which was controlled in the range of 500–6000 ppm, was fed to the photocatalytic membrane reactor in the range of 50–500 cm³/min using several types of flow patterns. Photocatalysis with membrane permeation resulted in a large decomposition rate, compared to photocatalysis without membrane permeation. The characteristics of the reaction such as decomposition ratio of MeOH, the conversion of the decomposed MeOH to CO₂ and H₂O were found to be a function of the residence time in the reactor. The photocatalytic reaction was analyzed based on pseudo-first-order kinetics to ascertain its simplicity, and the fitted curves were found to be in a relatively good agreement with the experimental data. Apparent rate constants with and without membrane permeation were 2.5 and 1.5×10⁻⁶ m s⁻¹, respectively, indicating that the performance of the photocatalytic reaction system with membrane permeation was enhanced.     

多孔膜反应器中丙烷催化脱氢制丙烯的模拟研究

针对丙烷高效脱氢制丙烯的多孔膜反应器构建了无量纲数学模型并进行了模拟研究,考察了催化剂活性、透氢膜性能、操作条件对多孔膜反应器中丙烷脱氢的转化率、丙烯收率、氢气收率和纯度的影响。结果表明,移走产物氢气可以有效提升膜反应器的性能,其性能的提升程度由不同温压条件下催化剂和透氢膜性能共同决定。高活性催化剂是丙烷高效转化的基础,催化剂活性越高,膜反应器内的产氢速率越快;其次,膜的选择性和渗透通量越高,氢气的移除效率越高,可在最大程度上打破热力学平衡的限制,使反应向生成丙烯的方向移动。当多孔透氢膜的氢气渗透率在10^-7~10^-6 mol·m^-2·s^-1·Pa^-1,H₂/C₃H₈选择性达到100时,其丙烷转化率可以与Pd膜反应器内的转化率相当,但分离的氢气纯度低于Pd膜反应器。与传统的固定床反应器相比,膜反应器由于促进了化学平衡的移动,可以在较低的反应温度下获得相当高的丙烷转化率,且丙烷转化率随着反应压力的增加呈现出一个最大值。该模拟研究可为实际生产过程中膜反应器用于PDH反应的高效强化提供有益的技术指导。     

A Novel Fluidized‐Bed Membrane Dual‐Type Reactor Concept for Methanol Synthesis

A novel fluidized‐bed membrane dual‐type methanol reactor (FBMDMR) concept is proposed in this paper. In this proposed reactor, the cold feed synthesis gas is fed to the tubes of the gas‐cooled reactor and flows in counter‐current mode with a reacting gas mixture in the shell side of the reactor, which is a novel membrane‐assisted fluidized bed. In this way, the synthesis gas is heated by heat of reaction which is produced in the reaction side. Hydrogen can penetrate from the feed synthesis gas side into the reaction side as a result of a hydrogen partial pressure difference between both sides. The outlet synthesis gas from this reactor is fed to tubes of the water‐cooled packed bed reactor and the chemical reaction is initiated by the catalyst. The partially converted gas leaving this reactor is directed into the shell of the gas‐cooled reactor and the reactions are completed in this fluidized‐bed side. This reactor configuration solves some drawbacks observed from the new conventional dual‐type methanol reactor, such as pressure drop, internal mass transfer limitations, radial gradient of concentration, and temperature in the gas‐cooled reactor. The two‐phase theory of fluidization is used to model and simulate the proposed reactor. An industrial dual‐type methanol reactor (IDMR) and a fluidized‐bed dual‐type methanol reactor (FBDMR) are used as a basis for comparison. This comparison shows enhancement in the yield of methanol production in the fluidized‐bed membrane dual‐type methanol reactor (FBMDMR).     

CFD-based optimization and design of multi-channel inorganic membrane tubes☆

As a major configuration of membrane elements,multi-channel porous inorganic membrane tubes were studied by means of theoretical analysis and simulation.Configuration optimization of a cylindrical 37-channel porous inorganic membrane tube was studied by increasing membrane filtration area and increasing permeation efficiency of inner channels.An optimal ratio of the channel diameter to the inter-channel distance was proposed so as to increase the total membrane filtration area of the membrane tube.The three-dimensional computational fluid dynamics(CFD) simulation was conducted to study the cross-flow permeation flow of pure water in the 37-channel ceramic membrane tube.A model combining Navier–Stokes equation with Darcy's law and the porous jump boundary conditions was applied.The relationship between permeation efficiency and channel locations,and the method for increasing the permeation efficiency of inner channels were proposed.Some novel multichannel membrane configurations with more permeate side channels were put forward and evaluated.