一种高性能低功耗的运动估计的设计

基于运动估计的全搜索算法,人们提出了有预处理的脉动阵列硬件结构,相较于无功耗处理的原始脉动阵列减少了12.3%。在此基础上,进一步根据逻辑产生门控时钟以及停止寄存器链对电路进行管理,取得了69.2%的功耗节省。     

Design of hybrid integrated-filter building blocks

An economical approach to integrated active RC filter design is described. Complex filter networks are broken down into a small family of cascadable second-order filter building blocks consisting of tantalum thin-film RC networks and semiconductor, integrated, operational amplifiers. The same building blocks are used for any desired filter configuration such as low-pass, high-pass, or bandpass filters, all-pass networks, notch filters, etc. Therefore, they possess the uniformity necessary for high-production quantities and batch processing, and consequently, benefit from the economical advantages that go with these methods.     

HMOS-CMOS-a low-power high-performance technology

HMOS-CMOS, a new high-performance bulk CMOS technology, is described. This technology builds on HMOS II, and features high resistivity p-substrate, diffused n-well and scaled n- and p-channel devices of 2-/spl mu/m channel length and 400-/spl Aring/ gate oxide thickness. The aggressive scaling of n and p devices results in 350-ps minimum gate delay and 0.04-pJ power delay product. HMOS-CMOS is a single poly technology suitable for microprocessor and static RAM applications. A 4K static RAM test vehicle is described featuring fully CMOS six-transistor memory cell, a chip size of 19600 mil/SUP 2/, 75 /spl mu/W standby power, data retention down to a V/SUB cc/ voltage of 1.5 V and a minimum chip select and address access time of 25 ns.     

Embedded power supply for low-power DSP

The use of dynamically adjustable power supplies as a method to lower power dissipation in DSP is analyzed. Power can be reduced substantially without sacrificing performance in fixed-throughput applications by slowing the clock and lowering supply voltage instead of idling when computational workload varies. This can yield a typical power savings of 30-50%. If latency can be tolerated, buffering data and averaging processing rate can yield power reductions of an order of magnitude in some applications. Continuous variation of the supply voltage can be approximated by very crude quantization and dithering: a four-level controller is sufficient to get within a few percent of the optimal power savings. Significant savings are possible only if the voltage can be changed on the same time scale as the variations in workload. A chip has been fabricated and tested to verify the closed-loop functionality of a variable voltage system. The controller takes only 0.4 mm² and draws a maximum of 1 mW at 2 V with a 40 MHz clock. The control framework developed is applicable to generic DSP applications     

A low-power high-performance current-mode multiport SRAM

This paper presents a new approach for energy reduction and speed improvement of multiport SRAMs. The key idea is to use current-mode for both read and write operations. To toggle a memory cell, a very small voltage swing is first created on the high-capacitive bit lines. This voltage is then translated into a differential current being injected into the cell, which in turn allows complementary potential to be developed on the cell nodes. As compared to the conventional write approach, SPICE simulations using a 0.35-μm CMOS process have shown 2.8 to 9.9× in energy savings and 1.02 to 6.36× reduction in delay, for memory sizes of 32 to 1 K words. We also present a current-mode sense-amplifier that operates in a similar fashion as the write circuit. The design and implementation of a pipelined 32×64 three-port register file utilizing the proposed technique is described. Measurements of the register file chip have confirmed the feasibility of the approach     

Algorithm-based low-power and high-performance multimedia signalprocessing

Low power and high performance are the two most important criteria for many signal-processing system designs, particularly in real-time multimedia applications. There have been many approaches to achieve these two design goals at many different implementation levels ranging from very-large-scale-integration fabrication technology to system design. We review the works that have been done at various levels and focus on the algorithm-based approaches for low-power and high-performance design of signal processing systems. We present the concept of multirate computing that originates from filterbank design, then show how to employ it along with the other algorithmic methods to develop low-power and high-performance signal processing systems. The proposed multirate design methodology is systematic and applicable to many problems. We demonstrate that multirate computing is a powerful tool at the algorithmic level that enables designers to achieve either significant power reduction or high throughput depending on their choice. Design examples on basic multimedia processing blocks such as filtering, source coding, and channel coding are given. A digital signal-processing engine that is an adaptive reconfigurable architecture is also derived from the common features of our approach. Such an architecture forms a new generation of high-performance embedded signal processor based on the adaptive computing model. The goal of this paper is to demonstrate the flexibility and effectiveness of algorithm-based approaches and to show that the multirate approach is an effective and systematic design methodology to achieve low-power and high throughput signal processing at the algorithmic and architectural level     

Narrow bus encoding for low-power DSP systems

High levels of integration in integrated circuits often lead to the problem of running out of pins. Narrow data buses can be used to alleviate this problem provided that the degraded performance due to wait cycles can be tolerated. We address bus coding methods for low-power core-based systems incorporating narrow buses. We show that transition signaling combined with bus-invert coding, which we call BITS coding, is particularly suitable for the data patterns of typical DSP applications on narrow data buses. The application of BITS coding to real circuit design is limited by the extra bus line introduced, which changes the pinout of the chip. We propose a new coding method, which does not require the extra bus line but retains the advantage of BITS     

A low-power DSP core-based software radio architecture

This paper describes an approach to developing a low-power digital signal processor (DSP) subsystem architecture for advanced software radio platforms. The architecture is intended to support next-generation wide-band spread-spectrum military waveforms. The methodology illustrates how a next-generation programmable DSP core forms the basis for an application-specific integrated circuit (ASIC). It also shows how semiconductor technologies can be integrated into such chips to achieve algorithm performance while minimizing subsystem power consumption. The ASIC is run-time configurable to maintain high flexibility. The range of RF channel modulation (“waveforms”) and air interfaces is intended to include both wide-band and traditional narrow-band waveforms. Estimated gate counts and power-consumption estimates are presented. DSP circuit-design and power-management strategies necessary to achieve low-power operation are presented. While the architecture discussion focuses on military waveforms, the approach is also applicable to commercial waveforms     

NEDA: a low-power high-performance DCT architecture

Conventional distributed arithmetic (DA) is popular in application-specific integrated circuit (ASIC) design, and it features on-chip ROM to achieve high speed and regularity. In this paper, a new DA architecture called NEDA is proposed, aimed at reducing the cost metrics of power and area while maintaining high speed and accuracy in digital signal processing (DSP) applications. Mathematical analysis proves that DA can implement inner product of vectors in the form of two's complement numbers using only additions, followed by a small number of shifts at the final stage. Comparative studies show that NEDA outperforms widely used approaches such as multiply/accumulate (MAC) and DA in many aspects. Being a high-speed architecture free of ROM, multiplication, and subtraction, NEDA can also expose the redundancy existing in the adder array consisting of entries of 0 and 1. A hardware compression scheme is introduced to generate a butterfly structure with minimum number of additions. NEDA-based architectures for 8 /spl times/ 8 discrete cosine transform (DCT) core are presented as an example. Savings exceeding 88% are achieved, when the compression scheme is applied along with NEDA. Finite word-length simulations demonstrate the viability and excellent performance of NEDA.     

Circuit techniques for CMOS low-power high-performance multipliers

In this paper we present circuit techniques for CMOS low-power high-performance multiplier design. Novel full adder circuits were simulated and fabricated using 0.8-μm CMOS (in BiCMOS) technology. The complementary pass-transistor logic-transmission gate (CPL-TG) full adder implementation provided an energy savings of 50% compared to the conventional CMOS full adder. CPL implementation of the Booth encoder provided 30% power savings at 15% speed improvement compared to the static CMOS implementation. Although the circuits were optimized for (16×16)-b multiplier using the Booth algorithm, a (6×6)-b implementation was used as a test vehicle in order to reduce simulation time. For the (6×6)-b case, implementation based on CPL-TG resulted in 18% power savings and 30% speed improvement over conventional CMOS     

A mixed-signal approach to high-performance low-power linearfilters

We present a new approach to the design of high-performance low-power linear filters. We use p-channel synapse transistors as analog memory cells, and mixed-signal circuits for fast low-power arithmetic. To demonstrate the effectiveness of our approach, we have built a 16-tap 7-b 200-MHz mixed-signal finite-impulse response (FIR) filter that consumes 3 mW at 3.3 V. The filter uses synapse pFETs to store the analog tap coefficients, electron tunneling and hot-electron injection to modify the coefficient values, digital registers for the delay line, and multiplying digital-to-analog converters to multiply the digital delay-line values with the analog tap coefficients. The measured maximum clock speed is 225 MHz; the measured tap-multiplier resolution is 7 b at 200 MHz. The total die area is 0.13 mm². We can readily scale our design to longer delay lines     

A low-power transponder IC for high-performance identificationsystems

A novel CMOS integrated circuit for a batteryless transponder system is presented. Batteryless transponders require contactless transmission of both the information and power between a mobile data carrier and a stationary or handheld reader unit. The operating principle of this system gives a superior performance in reading distance due to separation of the powering and data transmission phases-compared to systems with continuous powering and damping modulation. This paper describes the function of the transponder IC and the circuit design techniques used for the various building blocks     

A high-performance low-power CMOS AGC for GPS application

In this paper, a wide tuning range, low power CMOS automatic gain control (AGC) with a simple architecture is proposed. The proposed AGC is composed of variable gain amplifier (VGA), comparator and charge pump, and the dB-linear gain is controlled by charge pump. The AGC was implemented in a 0.18um CMOS technology. The dynamic range of the VGA is more than 55dB, the bandwidth is 30MHz and the gain error lower than ±1.5dB over the full temperature and gain ranges. It is designed for GPS application and is fed from a single 1.8V power supply. The AGC power consumption is less than 5mW and area of the AGC is 700*450um2.     

A high-performance low-power CMOS AGC for GPS application

A wide tuning range, low power CMOS automatic gain control (AGC) with a simple architecture is proposed. The proposed AGC is composed of a variable gain amplifier (VGA), a comparator and a charge pump, and the dB-linear gain is controlled by the charge pump. The AGC was implemented in a 0.18 μm CMOS technology. The dynamic range of the VGA is more than 55 dB, the bandwidth is 30 MHz, and the gain error is lower than ±1.5 dB over the full temperature and gain ranges. It is designed for GPS application and is fed from a single 1.8 V power supply.The AGC power consumption is less than 5 mW, and the area of the AGC is 700 × 450 μm~2.     

A high-performance, low-power complementary coupled BiCMOS circuit

Reported is a new complementary technique of full-swing BiCMOS circuit design which, though employs a p-n-p, allows the use of n-p-n-only drivers. The simulated results of this new circuit compare favorably among several representative BiCMOS circuits     

Architectural optimization for low-power nonpipelined asynchronoussystems

This paper presents an architectural optimization for low-power asynchronous systems. The optimization is targeted to nonpipelined computation. In particular, two new sequencing controllers are introduced, which significantly increase the throughput of the entire system. Data hazards may result in existing datapaths, when the new sequencers are used. To insure correct operation, new interlock mechanisms are introduced, for both dual-rail and single-rail implementations. The resulting increase in throughput can be traded for substantial system-wide power savings through application of voltage scaling. SPICE simulations show energy reduction by up to a factor of 2.4     

Vertically integrated SOI circuits for low-power and high-performance applications

Vertical integration offers numerous advantages over conventional structures. By stacking multiple-material layers to form double gate transistors and by stacking multiple device layers to form multidevice-layer integration, vertical integration can emerge as the technology of choice for low-power and high-performance integration. In this paper, we demonstrate that the vertical integration can achieve better circuit performance and power dissipation due to improved device characteristics and reduced interconnect complexity and delay. The structures of vertically integrated double gate (DG) silicon-on-insulator (SOI) devices and circuits, and corresponding multidevice-layer (3-D) SOI circuits are presented; a general double-gate SOI model is provided for the study of symmetric and asymmetric SOI CMOS circuits; circuit speed, power dissipation of double-gate dynamic threshold (DGDT) SOI circuits are investigated and compared to single gate (SG) SOI circuits; potential 3-D SOI circuits are laid out. Chip area, layout complexity, process cost, and impact on circuit performance are studied. Results show that DGDT SOI CMOS circuits provide the best power-delay product, which makes them very attractive for low-voltage low-power applications. Multidevice-layer integration achieves performance improvement by shortening the interconnects. Results indicate that up to 40% of interconnect performance improvements can be expected for a 4-device-layer integration.     

A low-power and high-performance CMOS fingerprint sensing andencoding architecture

A CMOS fingerprint sensor architecture with embedded cellular logic for image processing is presented. The system senses a fingerprint image with a capacitive technique and performs several image-processing algorithms, including thinning the ridges of the fingerprint structure and encoding it to its characteristic features. Image processing is achieved by application of hexagonal local operators implemented in pixel-parallel mixed neuron-MOS/CMOS logic circuits. The massive parallelism of the architecture leads to a very low power dissipation. Results of simulations and measurements on a demonstrator chip in 0.65-μm double-poly standard CMOS technology are shown. The approach is well suited for person-identification applications, especially in small and low-cost portable systems, such as smart cards