Novel coupling agents for PVC/wood‐flour composites *

Effective interfacial adhesion between wood fibers and plastics is crucial for both the processing and ultimate performance of wood–plastic composites. Coupling agents are added to wood–plastic composites to promote adhesion between the hydrophilic wood surface and hydrophobic polymer matrix, but to date no coupling agent has been reported for PVC/wood‐fiber composites that significantly improved their performance and was also cost‐effective. This article presents the results of a study using chitin and chitosan, two natural polymers, as novel coupling agents for PVC/wood‐flour composites. Addition of chitin and chitosan coupling agents to PVC/wood‐flour composites increased their flexural strength by ～20%, their flexural modulus by ～16%, and their storage modulus by ～33–74% compared to PVC/wood‐flour composite without the coupling agent. Significant improvement in composite performance was attained with 0.5 wt% of chitosan and when 6.67 wt% of chitin was used. J. VINYL ADDIT. TECHNOL., 11:160–165, 2005. © 2005 Society of Plastics Engineers     

Mechanical properties of poly(vinyl chloride)/wood flour/glass fiber hybrid composites

Short glass fibers were added to poly(vinyl chloride) (PVC)/wood flour composites as reinforcement agents. Unnotched and notched impact strength of PVC/wood flour/glass fiber hybrid composites could be increased significantly without losing flexural properties by adding type L glass fibers and over 40% of PVC. There was no such improvement when using type S glass fiber. The impact strength of hybrid composites increased along with the increment of the type L glass fiber content at a 50% PVC content. At high PVC contents, impact fracture surfaces were characterized by wood particle, glass fiber breakage and pullout, whereas interfacial debonding was the dominant fracture mode at higher filler concentrations. The significant improvement in impact strength of hybrid composites was attributed to the formation of the three‐dimensional network glass fiber architecture between type L glass fibers and wood flour.     

Durability of wood flour‐plastic composites exposed to accelerated freeze–thaw cycling. Part I. Rigid PVC matrix

This study examined the effects of accelerated freeze–thaw actions on the durability of wood fiber‐plastic composites. Rigid PVC formulations filled with various concentrations of wood flour (both pine and maple) were processed in a counterrotating twin‐screw extruder and exposed to cyclic freeze–thaw actions according to ASTM Standard D6662. Freeze–thaw cycling was also modified by omitting portions of the test (either the water or freezing) to verify whether or not moisture was the primary cause for property loss. The durability of exposed samples was assessed in terms of flexural properties, density, and dimensional stability. Scanning electron micrographs of unexposed and freeze–thaw‐exposed samples were taken to qualitatively evaluate the interfacial adhesion between the wood flour and PVC matrix. The experimental results indicated that the density was not affected by freeze–thaw cycling. The dimensional stability was also relatively unaffected, although greater wood flour content exhibited greater dimensional change. The loss in stiffness of the composites was statistically significant after only two freeze–thaw cycles, regardless of both the wood species and content. Conversely, the strength of the composites was not significantly affected by five freeze–thaw cycles at lower wood flour contents (50 and 75 phr). The deleterious effects of the freeze–thaw actions on the strength of the composites became apparent at higher wood flour content (100 phr) after only two freeze–thaw cycles for maple flour and five freeze–thaw cycles for pine flour. The property loss was attributed primarily to the water portion of the cycling, which appears to have led to the decreased interfacial adhesion between the wood flour and the rigid PVC matrix. J. VINYL. ADDIT. TECHNOL. 11:1–8, 2005. © 2005 Society of Plastics Engineers.     

Coextruded PVC/wood‐flour composites with WPC cap layers

Wood‐plastic composites (WPCs) can absorb moisture in a humid environment owing to the hydrophilic nature of the wood, thereby making the products susceptible to microbial growth and loss of mechanical properties. In this study, rigid poly(vinyl chloride) (PVC)/wood‐flour composites (core layer) were coextruded with either unfilled rigid PVC (cap layer) or rigid PVC filled with a small amount (5–27.5%) of wood flour (composite cap layers) in order to decrease or delay the moisture uptake. The thickness of the cap layer and its composition in terms of wood flour content were the variables examined during coextrusion. Surface color, moisture absorption, and flexural properties of both coextruded and noncoextruded (control) composite samples were characterized. The experimental results indicated that both unfilled PVC and composite cap layers can be encapsulated over rigid PVC/wood‐flour composites in a coextrusion process. The moisture uptake rate was lower when a cap layer was applied in the composites, and the extent of the decrease was a strong function of the amount of wood flour in the cap layer but insensitive to cap layer thickness. Overall, coextruding PVC surface‐rich cap layers on WPCs significantly increased the flexural strength but decreased the flexural modulus as compared with those of control samples. The changes in bending properties were sensitive to both cap layer thickness and wood flour content. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers     

Influence of various wood modifications on the properties of polyvinyl chloride/wood flour composites

Aminosilane, melamine and acetic anhydride treated wood flour were added to polyvinyl chloride (PVC) in order to process improved PVC/wood flour composites. The influence of wood treatment on water absorption and mechanical properties were evaluated. Treatments with amino-alkyl functional oligomeric siloxane and melamine in suitable concentration as well as acetylated wood flour composites showed decreased equilibrium moisture content and reduced speed of water absorption. Tensile strength, elongation at break and unnotched impact strength were considerably improved by the aminosilane treatments. The increase in strength and elongation was mainly influenced by the chemical structure and concentration of the used aminosilanes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Wood/plastic composites co‐extruded with multi‐walled carbon nanotube‐filled rigid poly(vinyl chloride) cap layer

Wood/plastic composites (WPCs) can absorb moisture in a humid environment due to the hydrophilic nature of the wood in the composites, making products susceptible to microbial growth and loss of mechanical properties. Co‐extruding a poly(vinyl chloride) (PVC)‐rich cap layer on a WPC significantly reduces the moisture uptake rate, increases the flexural strength but, most importantly, decreases the flexural modulus compared to uncapped WPCs. A two‐level factorial design was used to develop regression models evaluating the statistical effects of material compositions and a processing condition on the flexural properties of co‐extruded rigid PVC/wood flour composites with the ultimate goal of producing co‐extruded composites with better flexural properties than uncapped WPCs. Material composition variables included wood flour content in the core layer and carbon nanotube (CNT) content in the cap layer of the co‐extruded composites, with the processing temperature profile for the core layer as the only processing condition variable. Fusion tests were carried out to understand the effects of the material compositions and processing condition on the flexural properties. Regression models indicated all main effects and two powerful interaction effects (processing temperature/wood flour content and wood flour content/CNT content interactions) as statistically significant. Factors leading to a fast fusion of the PVC/wood flour composites in the core layer, i.e. low wood flour content and high processing temperature, were effective material composition and processing condition parameters for improving the flexural properties of co‐extruded composites. Reinforcing the cap layer with CNTs also produced a significant improvement in the flexural properties of the co‐extruded composites, insensitive to the core layer composition and the processing temperature condition. Copyright © 2009 Society of Chemical Industry     

PVC／木粉复合材料抗冲改性研究

用甲基丙烯酸、丙烯酸丁酯、甲基丙烯酸甲酯三元共聚物P（MAA—BA—MMA）对木粉进行预处理,再利用CPE、ACR和nano—CaCO3对PVC／木粉复合材料进行增韧改性。结果表明,木粉经P（MAA—BA—MMA）预处理后,使用ACR增韧时效果最好,其拉伸强度、弯曲强度、冲击强度和断裂伸长率分别提高了7．97％、5．26％、68．85％和571．26％。SEM结果表明,木粉预处理后再增韧,复合材料界面模糊,断面呈一定的韧性断裂特征。     

Effect of surface properties on the adhesion between PVC and wood veneer laminates

The interface between plastic and wood fibers strongly influences the mechanical properties of a plastic/wood-fiber composite. This paper presents a means for evaluating the effectiveness of surface treatment on the wood-fibers in the PVC/wood-fiber composites by investigating the adhesion between PVC and laminated wood veneers. Wood veneers were first treated with γ-aminopropyltriethoxysilane, dichlorodiethylsilane, phthalic anhydride, and maleated polypropylene for surface modification. The chemical modification made on the wood surfaces was then characterized using different complementary surface analytical techniques: X-ray photoelectron spectroscopy and surface tension measurements. The surface tension was determined from the equation of state for interfacial tensions and the measured contact angles of glycerol sessile drops on the wood veneers (both untreated and treated) and on PVC using the Axisymmetric Drop Shape Analysis–Contact Diameter (ADSA-CD) approach. The adhesion property was evaluated by measuring the tensile shear strength of single lap joints between two wood veneers bonded with a PVC film. The adhesion between PVC and wood veneer laminates was significantly improved when wood veneers were treated with amino-silane, while no improvement was observed for the other adhesion promoters. Our experimental results indicate that matching the surface tension is not sufficient to ensure good adhesion between PVC and wood veneers.     

加工助剂对PVC木塑复合材料性能的影响

研究了4种新型加工助剂对聚氯乙烯(PVC)木塑复合材料的加工特性和物理力学性能的影响,并利用扫描电子显微镜(SEM)研究复合材料的冲击断面。结果表明,以不饱和芳香族碳氢化合物、脂肪烃树脂为主要组分的加工助剂,能够提高木粉在PVC基体中的分散性,改善木粉与PVC的相容性,从而明显提高PVC木塑材料的力学性能和加工性能;以钙皂和饱和脂肪酸酰胺混合物、脂肪醇和脂肪酸酯的混合物为主要组分的加工助剂,对木粉的分散性和复合材料的加工性能有一定的改善,但其用量较大时对复合材料的力学性能有不利影响。     

Reinforcement of rigid PVC/wood‐flour composites with multi‐walled carbon nanotubes

Multi‐walled carbon nanotubes (CNT) were compounded with PVC by a melt blending process based on fusion behaviors of PVC. The effects of CNT content on the flexural and tensile properies of the PVC/CNT composites were evaluated in order to optimize the CNT content. The optimized CNT‐reinforced PVC was used as a matrix in the manufacture of wood‐plastic composites. Flexural, electrical, and thermal properties of the PVC/wood‐flour composites were evaluated as a function of matrix type (nonreinforced vs. CNT‐reinforced). The experimental results indicated that rigid PVC/wood‐flour composites with properties similar to those of solid wood can be made by using CNT‐reinforced PVC as a matrix. The CNT‐reinforced PVC did not influence the electrical and thermal conductivity of the PVC/wood‐flour composites. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers.     

Studies on the Thermal and Mechanical Properties of Foamed Wood-Polymer Composites

Wood flour-polypropylene foamed composites, in ratios of 10:90, 20:80, 30:70, and 40:60 (wt./wt.), were prepared with and without maleic anhydride treatment of wood flour and maleic anhydride-grafted PP (MAgPP). The effects of the amount of wood flour and its treatment on the morphology, the mechanical properties, and the thermal properties of the composites were investigated. Vicat softening temperatures (VST) were recorded as 112.9°C, 103.2°C, and 96.2°C for MAgPP wood flour (MPP), maleic anhydride-treated wood flour (MWF), and untreated wood flour (UWF) (40:60 wt./wt.) foamed composites, respectively. The heat distortion temperatures (HDT) were measured to be 80°C, 76°C, and 58°C for the respective composites. DSC thermograms showed an increase in the crystallinity of MPP and MWF composites with an increase in the ratio of wood flour in the composite, whereas the opposite trend was observed in untreated wood flour. Except for impact strength and flexural strength, Young's modulus, flexural modulus, and hardness all increased with an increase in wood flour content. The micrographs confirmed the foaming. The improvement in the properties of the composites is due to the increment in interfacial bonding between polymer and wood flour, which is caused by the compatibilizers.     

Chemical treatment of wood fiber and its reinforced unsaturated polyester composites

In order to enhance the interfacial adhesion between wood fiber and an unsaturated polyester matrix (UPE), acrylic acid (acrylic acid)/poly(methyl methacrylate), and (acrylic acid)/silanization (AAS) were used to treat the wood fibers. The mechanical properties and the impact fracture surfaces of the prepared composites were measured and characterized, and the fracture mechanism of these kinds of composites was analyzed. The results showed that the AAS composites possessed the optimum comprehensive mechanical properties. When the weight fraction of wood fiber was 16%, the flexural strength and flexural modulus of the AAS composites were increased by 28.9 and 51.8%, respectively, compared to those of untreated composites. The highest tensile strength and lowest water absorption were also noted for AAS composites. These composites possessed the strongest interfacial adhesion between wood fiber and the UPE matrix. J. VINYL ADDIT. TECHNOL., 19:18–24, 2013. © 2013 Society of Plastics Engineers     

Tensile properties,morphology, and thermal behavior of PVC composites containing pine flour and bamboo flour

Composites of unplasticized poly(vinyl chloride) (PVC) blended with bamboo flour and pine flour, respectively, were prepared in a batch mixer followed by compression molding. The effects of wood flour fillers on the morphology, static mechanical properties, and thermal properties of the composites were investigated. Compared with neat PVC resin, the introduction of both bamboo flour and pine flour significantly improved the stiffness of the composites, while decreasing the tensile strength to some extent. Tensile tests showed that pine flour–filled composites exhibited better mechanical properties than those filled with bamboo flour with the same particle size at the same loading level. Scanning electron microscopic examination revealed good dispersion and alignment tendency of short pine fiber within the composites at a lower loading level. Moreover, experimental results indicated that both bamboo flour and pine flour additions showed no obviously adverse effect on the thermal stabilities of these composites. Based on the comprehensive properties, these composites meet the need of woodlike material for use as wood structures. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1804–1811, 2004     

Mechanical,flammability, and thermal properties of polyvinyl chloride‐wood composites with carbide slag

Carbide slag, an industrial waste produced by calcium carbide hydrolysis to prepare C₂H₂ gas, was successfully used as inorganic filler in the production of polyvinyl chloride (PVC)‐wood composites. carbide slag had an average diameter of 8.1 μm which thermally decomposed at about 450°C, and its main component was Ca(OH)₂. Incorporating carbide slag into PVC‐wood composites substantially decreased the flexural, tensile, and impact strength of the composites as a result of the poor interfacial adhesion between carbide slag and PVC matrix, which could be evidently observed from the scanning electron microscopy (SEM) study. To give carbide slag better use, silane coupling agent KH570 were chose to modify carbide slag. The results indicated that adding carbide slag modified by KH570 (MCS) into PVC‐wood composites could significantly improve its notched impact strength and flexural modulus. The thermogravimetric analysis (TGA) data showed that with the addition of MCS, composite had better thermal stability. It also turned out that with the addition of MCS, its smoke suppression property and flammability were enhanced effectively. To ensure sufficient properties of PVC‐wood composites, the optimal adding content of MCS was 20 phr and it leaded to remarkable performance (its flexural modulus was 3.4 GPa, notched impact strength was 3.87 KJ/m², limiting oxygen index value was 41.5% and smoke density ranting was 55.1%), all of which endowed PVC‐wood composites better utilization. All the results indicated that the preparation of PVC‐wood composites with carbide slag could resolve environmental pollution, reuse carbide slag in different fields, and provide a new method for resource utilization of carbide slag. POLYM. COMPOS., 38:2898–2906, 2017. © 2015 Society of Plastics Engineers     

Online measurement of rheological properties of PVC/wood‐flour composites

By using a factorial design approach, this study examined the effect of the component materials on the viscoelastic properties of PVC/wood‐flour composites. Statistical analysis was performed to determine the effects of wood‐flour content, acrylic modifier content, and plasticizer content on the die swell ratio and viscosity of the composites measured online on a conical twin‐screw extrusion capillary rheometer. The viscoelastic properties of the samples also were measured using dynamic mechanical analyzer (DMA). Wood‐flour content and acrylic modifier content were the two important variables affecting the die swell ratio, whereas the addition of a low level of plasticizer did not affect this ratio. The die swell increased with the increased acrylic modifier content, but it was reduced considerably by adding wood flour into the PVC matrix. The true viscosity of neat PVC and PVC/wood‐flour composites decreased with the plasticizer content, irrespective of the acrylic modifier content. However, the addition of acrylic modifier significantly increased the viscosity of unfilled PVC, while an opposite trend was observed for the composites, owing to the differing effect of acrylic modifier on the melt elasticity and viscosity of these materials. J. Vinyl Addit. Technol. 10:121–128, 2004. © 2004 Society of Plastics Engineers.     

Effects of fiber extraction,morphology, and surface modification on the mechanical properties and water absorption of bamboo fibers‐unsaturated polyester composites

Bamboo fibers reinforced unsaturated polyester (UPE) composites were prepared by compression molding. Effects of fiber extraction, morphology, and chemical modification on the mechanical properties and water absorption of the bamboo fibers‐UPE composites were investigated. Results showed that the unidirectional original bamboo fibers resulting composites demonstrated the highest tensile strength, flexural strength, and flexural modulus; the 30–40 mesh bamboo particles resulting composites had the lowest tensile strength and flexural strength, but had comparable flexural modulus with that of chemical pulp fibers. The treatment of bamboo fibers with 1,6‐diisocyanatohexane (DIH) and 2‐hydroxyethyl acrylate (HEA) significantly increased the tensile strength, flexural strength and flexural modulus, and water resistance of the resulting composites. Fourier Transform Infrared and X‐ray photoelectron spectroscopy analyses showed that DIH and HEA were covalently bonded onto bamboo fibers. Scanning electron microscopic images of the fractured surfaces of the composites showed that the treatment of bamboo fibers greatly improved the interfacial adhesion between the fibers and UPE resins. The water absorption kinetics of the composites was also investigated; and the results showed that the water absorption of the composites fitted Fickian behavior well. POLYM. COMPOS., 37:1612–1619, 2016. © 2014 Society of Plastics Engineers     

Amine treatment of polyvinyl chloride/wood flour composites

Ethanolamine and L ‐arginine treated wood flour were added to polyvinyl chloride (PVC) in order to improve the interphase between PVC and wood. The influence of the treatment on pH‐value changes and nitrogen fixation of the wood and mechanical properties of the composite were evaluated. The treatments changed the pH of wood from acidic to basic. The highest nitrogen fixation was measured for monoethanolamine and L ‐arginine treated wood flour at high concentrations. Tensile strength, elongation at break, and unnotched impact strength were improved by ethanolamine and L ‐arginine treatments considerably. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

PVC基木塑复合材料力学性能的研究

利用胺类改性剂M处理木粉,研究了改性剂M和力学性能改性剂丙烯腈-苯乙烯共聚(物AS)的用量对聚氯乙(烯PVC)基复合材料力学性能的影响。结果表明:随着改性剂M用量的增加,复合材料的拉伸强度、无缺口冲击强度、弯曲强度以及弯曲模量都呈先上升后下降的趋势,且当M用量略大于2%时达到最大值;随着AS用量的增加,复合材料的拉伸强度、弯曲强度及弯曲模量都呈逐渐上升的趋势,无缺口冲击强度呈逐渐下降的趋势到,8%时趋于平缓。     

甲基化木粉与PE-g-MAH对木粉/HDPE复合材料力学性能的协同作用研究

主要研究了木粉表面甲基化改性和增容剂马来酸酐接枝聚乙烯(PE-g-MAH)对木粉/高密度聚乙烯(HDPE)复合材料力学性能的协同作用.木粉经表面甲基化处理后,与10％PE-g-MAH协同使用,甲基化木粉/PE-g-MAH/HDPE复合材料的拉伸强度、弯曲强度和冲击强度均明显高于未改性木粉/PE-g-MAH/HDPE复合...     

木质填料种类及含量对木塑复合材料性能的影响

研究了木质填料的种类和含量对木塑复合材料性能的影响。实验发现:随着木粉、竹粉含量的提高,复合材料的拉伸强度、维卡软化温度、弯曲强度和弯曲模量都得到了较大幅度的提高,冲击强度、断裂伸长率和熔体流动速率有所下降。不同粒径和不同种类的木质填料对复合材料的力学性能也有明显的影响,以100目木粉制得复合材料的性能最好,DSC实验数据分析表明:木粉、竹粉含量的变化对复合材料体系的熔融温度有影响;SEM扫描冲击断口形貌表明:相容剂能够有效改善木粉与HDPE界面的相容性,提高界面黏合力,从而使复合材料的性能得到提高。