Synthesis,metal ion complexation and antibacterial activities of some thiapodands with lipophilic amide and ester end groups

A series of acyclic analogues of thiacrown ethers (podands) 7–12 with lipophilic amide and ester end groups were synthesized in high yield and in a simple way. Their transition metal ions complexation was studied using a conductometric method in acetonitrile at 25°C. Podands 7 and 11 showed a continuous decrease in the molar conductances in their complexation with Ag⁺, Cu²⁺, Cd²⁺, Hg²⁺, Zn²⁺ and Pb²⁺ which begins to level off at a mole ratio of 1:1 podand to metal indicating the formation of a stable 1:1 complexes. On the other hand, podand 9 also showed the formation of 1:1 complexes with above metal cations except with Hg²⁺ ion, which formed a 1:2 podand-to-metal ratio complex. An influence of end groups on metal ion selectivity is evident. Podands having ethoxy end groups (podands 8, 10 and 12 exhibit pronounced metal ion selectivity over podands having amino end groups (podands 7, 9 and 11). Compounds 10 and 12 with dithiaethylene units and ethoxy end groups provide the best selectivity for Hg²⁺ and Ag⁺ ions. These results suggest that podands 10 and 12 could be useful for the selective removal of Hg²⁺ and Ag⁺ ions from industrial waste that may contain a variety of toxic heavy and transition metal ions. The in vitro antibacterial activity of the investigated compounds was tested against several microorganisms such as Bacillus subtilis (ATCC 6633), Micrococcus luteus (ATCC 10240), Staphylococcus aureus (ATCC 43300), Escherichia coli (ATCC 25922) and Enterobacter aerogenes (ATCC 13048). The antibacterial activity of podand 10 is significant for M. luteus and B. subtilis compared with other podands under investigation.     

Cu2+ Selective Chromogenic Behavior of Calix[4]arene Derivative

This study involves the copper selective chromogenic response of 5, 11, 17, 23-Tetrakis (N-pyrrolidinomethyl)-25, 26, 27, 28-tetrahydroxycalix[4]arene based mannich base (3). Complexation ability of (3) was explored by examining the effect of a series of various metal ions, such as Li⁺, Na⁺, K⁺, Ag⁺, Ba²⁺, Ca²⁺, Mn²⁺, Mg²⁺, Sr²⁺, Ni²⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Pb²⁺, Zn²⁺, Fe²⁺, Fe³⁺, and Al³⁺, by using UV-visible spectroscopy. Ligand (3) exhibited pronounced selectivity toward Cu²⁺ even in the presence of various co-existing ions. The stoichiometric analysis, i.e., Job's plot revealed that (3) form 1:1 complex with Cu²⁺ ion in DMF-H₂O system. The complexation phenomenon was confirmed by FT-IR spectroscopy that favors the selective nature of (3) with Cu²⁺.     

Preparation and adsorption selectivity for Hg(II) and Ag(I) of chelating resin immobilizing benzothiazolyl group on crosslinked polystyrene via hydrophilic sulfur‐containing PEG spacer

A new chelating resin incorporating 2‐mercaptobenzothiazole (MBZ) into macroporous chloromethylated polystyrene via hydrophilic spacer of polyethylene glycol containing sulfur was synthesized. The resin was characterized by elementary analysis and infrared spectra. The adsorption capacity of the resin for Ag⁺, Hg²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ as a function of pH was determined. The effects of interference ions, such as Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺, on percent recovery were also investigated. The results showed that the resin could effectively remove Hg²⁺ and Ag⁺ from solutions containing a large excess of Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. In column operation, it was observed that Hg²⁺ and Ag⁺ in trace quantities were effectively removed from binary metal ions. The percent recovery of the resin for Hg²⁺ and Ag⁺ was >98.6% and >97.5%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5034–5038, 2006     

Synthesis and Metal‐ion Binding Properties of New N2S4O2‐ and N2S5O2‐Donor Macrocycles

Abstract

Synthetic procedures for new mixed‐donor macrocycle compounds were reported. The macrocyclic compounds were used in solvent extraction metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Pb²⁺, and Co²⁺. The metal picrate extractions were investigated at 25±0.1°C with the aid of UV‐visible spectrometry. It was found that 6,7,9,10,12,13,23,24‐octahydro‐19H,26Hdibenzo[h,t](1,4,7,13,16,22,10,19) dioxatetrathiadiazasiclotetracosine‐20,27(21H,28H)‐dione showed selectivity towards Ag⁺, Hg²⁺, and Cd²⁺ among the other metals. The extraction constants (Log K_ex) and complex compositions were determined for the Ag⁺ and Hg²⁺ complexes for this compound and 9,10,12,13,23,24,26,27,29,30‐decahydro‐5H,15H‐dibenzo‐[h,w][1,4,7,13,16,19,25‐,10,22] dioxapentathiadiazacycloheptacosine‐6,16(7H,17H)‐dione.     

Study of the synthesis of chitosan derivatives containing benzo‐21‐crown‐7 and their adsorption properties for metal ions

Three new chitosan crown ethers, N‐Schiff base‐type chitosan crown ethers (I, III), and N‐secondary amino type chitosan crown ether (II) were prepared. N‐Schiff base‐type chitosan crown ethers (I, III) were synthesized by the reaction of 4′‐formylbenzo‐21‐crown‐7 with chitosan or crosslinked chitosan. N‐Secondary amino type chitosan‐crown ether (II) was prepared through the reaction of N‐Schiff base type chitosan crown ether (I) with sodium brohydride. Their structures were characterized by elemental analysis, infrared spectra analysis, X‐ray diffraction analysis, and solid‐state ¹³C NMR analysis. In the infrared spectra, characteristic peaks of C?N stretch vibration appeared at 1636 cm^?1 for I and 1652 cm^?1 for II; characteristic peaks of N? H stretch vibration appeared at 1570 cm^?1 in II. The X‐ray diffraction analysis showed that the peaks at 2θ = 10° and 28° disappeared in chitosan derivatives I and III, respectively; the peak at 2θ = 10° disappeared and the peak at 2θ = 28° decreased in chitosan‐crown ether II; and the peak at 2θ = 20° decreased in all chitosan derivatives. In the solid‐state ¹³C NMR, characteristic aromatic carbon appeared at 129 ppm in all chitosan derivatives, and the characteristic peaks of carbon in C?N groups appeared at 151 ppm in chitosan crown ethers I and III. The adsorption and selectivity properties of I, II, and III for Pd²⁺, Au³⁺, Pt⁴⁺, Ag⁺, Cu²⁺, and Hg²⁺ were studied. Experimental results showed these adsorbents not only had good adsorption capacities for noble metal ions Pd²⁺, Au³⁺, Pt⁴⁺, and Ag⁺, but also high selectivity for the adsorption of Pd²⁺ with the coexistence of Cu²⁺ and Hg²⁺. Chitosan‐crown ether II only adsorbs Hg²⁺ and does not adsorbs Cu²⁺ in an aqueous system containing Pd²⁺, Cu²⁺, and Hg²⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1886–1891, 2002     

C,N‐Pyridylpyrazole‐Based Ligands: Synthesis and Preliminary Use in Metal Ion Extraction

Abstract

The synthesis of new N‐donor pyridylpyrazole ligands with a functionalized arm is described. The complexation capabilities of these compounds towards bivalent metal ions (Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺) and alkali metal ions (K⁺, Na⁺, and Li⁺) were investigated using the liquid‐liquid extraction process. The percentage limits of extraction were determined by atomic absorption measurements.     

Chromatographic Separations of Metal Ions on Zirconium Tungstoarsenate Impregnated Ion-Exchange Papers

Abstract

A new heteropolyacid salt ion-exchanger, zirconium tungstoarsenate, has been used for preparing impregnated ion-exchange papers. Twenty-nine metal ions have been chromatographed and R_F values determined in seven different mixed solvent systems containing 1-propanol and HNO³ or HCl. On the basis of the difference in selectivities for different metal ions on impregnated papers, a large number of binary and ternary separations has been obtained. Some of the important separations achieved are Ag⁺–Tl⁺, Ag⁺–Pt(IV), Zn²⁺–Hg²⁺, Sb³⁺–Bi³⁺, Zn²⁺–UO₂ ²⁺, Fe²⁺–Fe³⁺, Sb³⁺–Bi³⁺–Hg²⁺, Ag⁺–Ba²⁺–UO₂ ²⁺, and Ag⁺–Zn²⁺–Cu²⁺–Sn²⁺. The results are compared with those obtained on plain papers.     

Effect of Receiving Phase Anion on Macrocycle-Mediated Cation Transport Rates and Selectivities in Water—Toluene—Water Emulsion Membranes

Abstract

Relative transport rates of metal nitrates (Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, T1⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, and Pb²⁺) were measured alone and in combination with either Pb²⁺, Ag⁺, or T1⁺ in a water-toluene-water emulsion membrane system. The toluene phase contained the surfactant Span 80 and the crown ether dicyclohexano-18-crown-6 (DC18C6). The aqueous receiving phase contained the lithium salt of one of the following anions: pyrophosphate, thiosulfate, hydroxide, chloride, formate, nitrate. In the case of the metal combinations, chloride and formate ions were not studied. Unless significant complexation occurred both between the transported cation and the anion in the receiving phase and between the cation and DC18C6 in the membrane phase, there was little or no transport of the cation from the source phase to the receiving phase. Selective removal of Pb²⁺ and of Ag⁺ from binary mixtures of these cations with each of the cations listed was demonstrated using the emulsion membrane.     

Synthesis and characterization of new optically active polymers carrying calix[4]arene and amino acid units in the main chain and their binding properties towards toxic heavy metals

BACKGROUND: A series of novel optically active polymers containing upper rim calix[4]arene was prepared from the polycondensation reaction of calix diamine derivative 2 with two optically active diacid chlorides. RESULTS: The optically active compounds were prepared from the reaction of a pyromellitic dianhydride with two chiral amino acids. The optically active polymers were obtained in a yield of 80–86% and had an inherent viscosity of 0.20–0.26 dL g^?1. The polymers were characterized using Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. Studies of the complexation of the polymers towards some alkali metal and toxic transition metal cations were performed using solid–liquid sorption procedures and comparisons made with the starting monomer. CONCLUSION: It is evident from the complexation studies that the polymers investigated are good polymeric ionophores for alkali metal cations like Na⁺ and K⁺, for Ag⁺ and for toxic heavy metal cations such as Cu²⁺, Co²⁺, Cd²⁺ and Hg²⁺. These polymers are good candidates for use in chiral stationary phases for separation of enantiomers in ionic media, as well for removing metal ions. Copyright © 2009 Society of Chemical Industry     

Complexation studies of some newly synthesized precursors for substituted dibenzo and dibenzodiaza crown ethers

This study represents the synthesis of dibenzo and dibenzodiaza crown ether precursors with various functional groups in good yield by employing four different methods using polar protic and aprotic solvents with high boiling points. Also the complexation abilities of all synthesized ligands with Cu²⁺, Zn²⁺, and Ag⁺ were studied by conductometry; thus the conductometric behavior of Cu(NO₃)₂, ZnCI₂, and AgNO₃ in 80% dioxane–water mixture was investigated in the presence of these ligands. The order of formation constant for complexes of the ligands with Cu²⁺, Zn²⁺, and Ag⁺ ions was found to be: Cu²⁺ > Zn²⁺ > Ag⁺ for the ligands of VI , VII , XI , and XII ; Cu²⁺ > Ag⁺ > Zn²⁺ for the ligands of III and VIII ; and Zn²⁺ > Cu²⁺ > Ag⁺ for the ligands of I , II , IV , V , IX , and X . © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2497–2501, 2004     

Chromogenic sensing of Cu(II) by imino linked thiacalix[4]arene in mixed aqueous environment

Thiacalix[4]arene based imino receptors 4–5 carrying azophenol appendage have been synthesized and studied for their binding abilities towards different metal ions (Li⁺, Na⁺, K⁺, Cd²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺ and Hg²⁺). Receptor 4 showed selective chromogenic sensing for Cu²⁺ ions in mixed aqueous conditions (THF:H₂O, 9:1 v/v).     

Physicochemical investigation of radiation‐grafted poly(acrylic acid)‐graft‐poly(tetrafluoroethylene–ethylene) copolymer membranes and their use in metal recovery from aqueous solution

ET‐g‐PAAc membranes were obtained by radiation grafting of acrylic acid onto poly(tetrafluoroethylene–ethylene) copolymer films using a mutual technique. The ion selectivity of the grafted membranes was determined toward K⁺, Ag⁺, Hg²⁺, Co²⁺, and Cu²⁺ in a mixed aqueous solution. The ion‐exchange capacity of the grafted membranes was measured by back titration and atomic absorption spectroscopy. The Hg²⁺ ion content of the membrane was more than that of either the K⁺ or Ag⁺ ions. The presence of metal ions in the membranes was studied by infrared and energy‐dispersive spectroscopy measurements. Scanning electron microscopy of the grafted and metal‐treated grafted membranes showed modification of the morphology of the surface due to the adsorption of K⁺ and Ag⁺ ions. No change was observed for the surface of the membrane that was treated with Hg²⁺ ions. The thermal stability of different membranes was improved more with Ag⁺ and Hg²⁺ ions than with K⁺ ions. It was found that the modified grafted membranes possessed good hydrophilicity, which may make them promising candidates for practical applications, such as for cation‐exchange membranes in the recovery of metals from an aqueous solution. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2692–2698, 2002     

Thiacalixarenes with Sulfur Functionalities at Lower Rim: Heavy Metal Ion Binding in Solution and 2D-Confined Space

Sulfur-containing groups preorganized on macrocyclic scaffolds are well suited for liquid-phase complexation of soft metal ions; however, their binding potential was not extensively studied at the air–water interface, and the effect of thioether topology on metal ion binding mechanisms under various conditions was not considered. Herein, we report the interface receptor characteristics of topologically varied thiacalixarene thioethers (linear bis-(methylthio)ethoxy derivative L², O₂S₂-thiacrown-ether L³, and O₂S₂-bridged thiacalixtube L⁴). The study was conducted in bulk liquid phase and Langmuir monolayers. For all compounds, the highest liquid-phase extraction selectivity was revealed for Ag⁺ and Hg²⁺ ions vs. other soft metal ions. In thioether L² and thiacalixtube L⁴, metal ion binding was evidenced by a blue shift of the band at 303 nm (for Ag⁺ species) and the appearance of ligand-to-metal charge transfer bands at 330–340 nm (for Hg²⁺ species). Theoretical calculations for thioether L² and its Ag and Hg complexes are consistent with experimental data of UV/Vis, nuclear magnetic resonance (NMR) spectroscopy, and single-crystal X-ray diffractometry of Ag–thioether L² complexes and Hg–thiacalixtube L⁴ complex for the case of coordination around the metal center involving two alkyl sulfide groups (Hg²⁺) or sulfur atoms on the lower rim and bridging unit (Ag⁺). In thiacrown L³, Ag and Hg binding by alkyl sulfide groups was suggested from changes in NMR spectra upon the addition of corresponding salts. In spite of the low ability of the thioethers to form stable Langmuir monolayers on deionized water, one might argue that the monolayers significantly expand in the presence of Hg salts in the water subphase. Hg²⁺ ion uptake by the Langmuir–Blodgett (LB) films of ligand L³ was proved by X-ray photoelectron spectroscopy (XPS). Together, these results demonstrate the potential of sulfide groups on the calixarene platform as receptor unit towards Hg²⁺ ions, which could be useful in the development of Hg²⁺-selective water purification systems or thin-film sensor devices.     

A new rhodamine-based single molecule multianalyte (Cu, Hg) sensor and its application in the biological system

A new single molecule multianalyte sensor, vanillic aldehyde rhodamine 6G hydrazone has been designed for the selective detection of Cu²⁺ and Hg²⁺ ions. UV/Vis spectroscopy indicates that the sensor is a good chromogenic chemosensor for Cu²⁺ in 1:99 (v/v) ethanol-water media. Whereas, other ions, such as Li⁺, Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺, Ag⁺, Cd²⁺, Ba²⁺, Hg²⁺ and Pb²⁺ failed to generate a distinct response. Fluorescence spectral data reveals that the sensor is an excellent fluorescent chemosensor for Hg²⁺ in aqueous ethanol solution and with no fluorescent response toward other ions. The spectroscopic behavior of the sensor in living cells indicated that it can be used for the detection of Cu²⁺ and Hg²⁺ in environmental and biological systems. Mechanisms for the high selectivity of the sensor to Cu²⁺ and Hg²⁺ are discussed.     

The Synthesis of New N2S2‐Macrocyclic Schiff Base Ligands and Investigation of Their Ion Extraction Capability from Aqueous Media

Abstract

Two new macrocyclic Schiff bases, (5) and (7), containing nitrogen‐sulfur donor atoms were designed and synthesized by reaction of α,α′ bis(o‐aminophenylthio)‐1,2‐xylene with glyoxal and phthaldialdehyde, respectively. The liquid‐liquid extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, K⁺, and Na⁺ from aqueous phase to the organic phase was carried out using the novel ligands. The effect of chloroform and dichloromethane as organic solvents over the metal picrate extractions was investigated at 25±0.1°C by using UV‐visible spectrometry. The extractability and selectivity of the tested metal picrates were evaluated. The values of the extraction constants (log K_ex) were determined for the extracted complexes.     

Adsorption properties of novel chelating resins containing 2‐amino‐5‐methylthio‐1,3,4‐thiadizole and hydrophilic spacer arms for Hg2+ and Ag+

The adsorption properties, including the adsorption kinetics, adsorption isotherms, and adsorption selectivity, of newly formed chelating resins that contained a heterocyclic functional group and a hydrophilic spacer arm of poly(ethylene glycol) [polystyrene–diethylene glycol–2‐amino‐5‐methylthio‐1,3,4‐thiadizole (PS–DEG–AMTZ) and polystyrene–triethylene glycol–2‐amino‐5‐methylthio‐1,3,4‐thiadizole (PS–TEG–AMTZ)] were studied in detail. The results show that the adsorption kinetics of PS–DEG–AMTZ and PS–TEG–AMTZ for Hg²⁺ and Ag⁺ could be described by a pseudo‐second‐order rate equation. The introduction of a spacer arm between the polymeric matrix and functional group was beneficial for increasing the adsorption rates. The apparent activation energies of the resins for Hg²⁺ and Ag⁺ were within 20.89–32.32 kJ/mol. The Langmuir model could describe the isothermal process of Hg²⁺ and Ag⁺. The competitive adsorption of the resins for Hg²⁺ and Ag⁺ in binary mixture systems was also investigated. The results show that Hg²⁺ and Ag⁺ were adsorbed before the other metal ions, such as Cu²⁺, Zn²⁺, Fe³⁺, Cd²⁺, and Pb²⁺, under competitive conditions. Five adsorption–desorption cycles were conducted for the reuse of the resins. The results indicate that these two resins were suitable for reuse without considerable changes in the adsorption capacity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Spectrophotometric and electrochemical behavior of a novel azocalix[4]arene derivative as a highly selective chromogenic chemosensor for Cr

In this study, a novel azocalix[4]arene derivative, 5,11,17-tris[(1-naphtyl)azo]-25,26,27,28-tetrahydroxy-calix[4]arene (NAC4) bearing napthyl groups on the upper rim was synthesized. Its complexation behavior for alkali, alkaline-earth and various heavy metal ions (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺, Hg²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Co²⁺, Fe²⁺, Cr³⁺, Ag⁺) was investigated by spectroscopic and voltammetric methods. This chemosensor exhibits decreased absorbance in the presence of Hg²⁺ and a unique absorbance quenching effect only for Cr³⁺. In addition, a new absorption band centered at 565 nm with the formation of the 1:1 host–guest complex (Cr³⁺-NAC4) was observed in the case of Cr³⁺, leading to an obvious color change from light orange to dark lilac. In voltammetric experiments, Cr³⁺ ions decreased voltammetric peaks of NAC4, whereas no significant changes occurred in the presence of the other metal ions. The Benesi–Hildebrand method was used to determine a logarithmic value of 3.76 for the association constant of the complex between Cr³⁺ and NAC4.     

Evaluation of a (E,E)‐Dioxime Containing Two 15‐Membered Dioxatrithiamacrocycles and its Mononuclear Ni(II) Complex as Ag+ Extractants

Abstract

A macrocyclic vic‐dioxime (1) and its mononuclear Ni(II) complex (2) were studied as extractant. The aqueous solutions of Ag⁺, Mn²⁺, Pb²⁺, Ni²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ picrates were used for extraction experiments. The solutions of the ligands in two different organic solvents were used as organic phases. The metal picrate extractions were carried out at 25±0.1°C by using UV‐visible spectrometry. The most effective transport was observed for Ag⁺ picrate among the tested metal picrates. The effect of pH on the extraction of Ag⁺ picrate was evaluated with the ligands. The ratio of extracted Ag‐complex to chloroform phase was 2:1 (L:M) for (2). In other cases the ratios were 1:1 for both (1) and (2). Molar ratio method was also used to demonstrate the composition. The values of the extraction constants (log K_ex) were determined for the extracted Ag‐complexes.     

The first substituted macrocyclic ligand Py2N4S2 containing four naphthylmethylene pendant-armed groups: Synthesis and photophysical properties

The synthesis of a pendant donor emissive macrocyclic ligand Py₂N₄S₂ with up to four naphthylmethylene arms (L) has been achieved. Their derivative solid metal complexes (Co^2 +, Ni^2 +, Cu^2 +, Zn^2 +, Cd^2 +, Hg^2 + and Ag⁺) have been isolated and characterized. The photophysical properties of the free ligand L and their complexation behaviour have been investigated in solution. In dichloromethane, the free ligand presents two emission bands which are related to the monomer naphthalene emission and a red-shifted band attributable to ground state dimers (interaction between two naphthalene chromophores), which was further validated from time-resolved data, with bi-exponential decay with absence of dynamic components. UV–Vis spectroscopy has revealed a 2:1 binding stoichiometry for Co^2 +, Cu^2 +, Zn^2 +, Hg^2 + and Ag⁺.