Coaxial multi-interface hollow Ni-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZnO nanowires tailored by atomic layer deposition for selective-frequency absorptions

In this work atomic layer deposition (ALD) was employed to fabricate coaxial multi-interface hollow Ni-Al2O3-ZnO nanowires.The morphology,microstructure,and ZnO shell thickness dependent electromagnetic and microwave absorbing properties of these Ni-A12O3-ZnO nanowires were characterized.Excellent microwave absorbing properties with a minimum reflection loss (RL) of approximately-50 dB at 9.44 GHz were found for the Ni-Al2O3-100ZnO nanowires,which was 10 times of Ni-A12O3 nanowires.The microwave absorption frequency could be effectively varied by simply adjusting the number of ZnO deposition cycles.The absorption peaks of Ni-Al2O3-100ZnO and Ni-A12O3-150ZnO nanowires shifted of 5.5 and 6.8 GHz towards lower frequencies,respectively,occupying one third of the investigated frequency band.The enhanced microwave absorption arose from multiple loss mechanisms caused by the unique coaxial multi-interface structure,such as multi-interfacial polarization relaxation,natural and exchange resonances,as well as multiple internal reflections and scattering.These results demonstrate that the ALD method can be used to realize tailored nanoscale structures,making it a highly promising method for obtaining high-efficiency microwave absorbers,and opening a potentially novel route for frequency adjustment and microwave imaging fields.     

Preparation of a magnetically recoverable nanocatalyst via cobalt-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and its application in the hydrogenation of nitroarenes

In this paper, we describe the facile and effective preparation of a series of cobalt-doped Fe₃O₄ nanocatalysts via chemical coprecipitation in an aqueous solution. The catalyst allowed the hydrogenation of chloronitrobenzenes to chloroanilines (CAs) to proceed at low temperatures in absolute water and at atmospheric pressure, resulting in approximately 100% yield and selectivity. Several factors that influence the yield of CAs were investigated. The results showed that the suitable dosage of the catalyst was ~10 mol.% of the substrate, and the optimal reaction time, reaction temperature, and reaction pressure were 20 min, 80 °C, and atmospheric pressure, respectively. Under the optimal reaction conditions, the CA yield was as high as 98.4%, and the nitro reduction rate reached 100%, which indicates the excellent selectivity of the homemade catalyst. This process also overcomes the environmental pollution harms associated with the traditional process.

Open image in new window

     

Effects of talc and clay addition on pressureless sintering of porous Si<Subscript>3</Subscript>N<Subscript>4</Subscript> ceramics

Porous Si₃N₄ ceramics were successfully synthesized using cheaper talc and clay as sintering additives by pressureless sintering technology and the microstructure and mechanical properties of the ceramics were also investigated. The results indicated that the ceramics consisted of elongated β-Si₃N₄ and small Si₂N₂O grains. Fibrous β-Si₃N₄ grains developed in the porous microstructure, and the grain morphology and size were affected by different sintering conditions. Adding 20% talc and clay sintered at 1700°C for 2 h, the porous Si₃N₄ ceramics were obtained with excellent properties. The final mechanical properties of the Si₃N₄ ceramics were as follows: porosity, P ₀ = 45·39%; density, ρ = 1·663·g·cm⁻³; flexural strength, σ _b (average) = 131·59 MPa; Weibull modulus, m = 16·20.     

Room-Temperature Photomagnetic Effect of Fe<Subscript>3</Subscript>Ga<Subscript>4</Subscript> Grown on GaAs Substrates

Ga–As–Fe composite films prepared by molecular beam epitaxy at 600°C on GaAs(100) substrates with the stacking sequence of [100-nm GaAs/50-nm Fe₃Ga_{2− x} As _x /100-nm GaAs] exhibit the distinct photo-enhanced magnetization at room temperature. Transmission electron microscopy reveals the formation of metamagnetic Fe₃Ga₄ grains on the sample surface. Illumination power dependence of the enhanced magnetization has been carefully compared with the antiferromagnetic-type magnetization–temperature (M–T) curve (Neel temperature of T _N = 340–390 K), from which we have discussed the existence of photon-mode photo-enhanced magnetization of some sort in addition with the enhancement due to the light-induced heating.     

Synthesis of well-defined Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods/N-doped graphene for lithium-ion batteries

The geometric size and distribution of magnetic nanoparticles are critical to the morphology of graphene (GN) nanocomposites, and thus they can affect the capacity and cycling performance when these composites are used as anode materials in lithium-ion batteries (LiBs). In this work, Fe₃O₄ nanorods were deposited onto fully extended nitrogen-doped GN sheets from a binary precursor in two steps, a hydrothermal process and an annealing process. This route effectively tuned the Fe₃O₄ nanorod size distribution and prevented their aggregation. The transformation of the binary precursor was characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). XPS analysis indicated the presence of N-doped GN sheets, and that the magnetic nanocrystals were anchored and uniformly distributed on the surface of the flattened N-doped GN sheets. As a high performance anode material, the structure was beneficial for electron transport and exchange, resulting in a large reversible capacity of 929 mA·h·g^–1, high-rate capability, improved cycling stability, and higher electrical conductivity. Not only does the result provide a strategy for extending GN composites for use as LiB anode materials, but it also offers a route for the preparation of other oxide nanorods from binary precursors.

Open image in new window

     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.     

Study of gel grown mixed crystals of Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript>(1−<Emphasis Type="Italic">x</Emphasis>)</Subscript>(IO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The growth of mixed crystals of Ba _x Ca_1−x (IO₃)₄ were carried out with simple gel method. The effect of various parameters such as pH of gel solution, gel concentration, gel setting time, concentration of reactants on the growth was studied. Crystals having different morphologies and habits were obtained. The grown crystals were characterized by XRD, FT-IR, EDAX, TGA, DTA and DSC.     

Single Ni Atoms Anchored on Porous Few‐Layer g‐C3N4 for Photocatalytic CO2 Reduction: The Role of Edge Confinement

It is greatly intriguing yet remains challenging to construct single‐atomic photocatalysts with stable surface free energy, favorable for well‐defined atomic coordination and photocatalytic carrier mobility during the photoredox process. Herein, an unsaturated edge confinement strategy is defined by coordinating single‐atomic‐site Ni on the bottom‐up synthesized porous few‐layer g‐C₃N₄ (namely, Ni₅‐CN) via a self‐limiting method. This Ni₅‐CN system with a few isolated Ni clusters distributed on the edge of g‐C₃N₄ is beneficial to immobilize the nonedged single‐atomic‐site Ni species, thus achieving a high single‐atomic active site density. Remarkably, the Ni₅‐CN system exhibits comparably high photocatalytic activity for CO₂ reduction, giving the CO generation rate of 8.6 µmol g^?1 h^?1 under visible‐light illumination, which is 7.8 times that of pure porous few‐layer g‐C₃N₄ (namely, CN, 1.1 µmol g^?1 h^?1). X‐ray absorption spectrometric analysis unveils that the cationic coordination environment of single‐atomic‐site Ni center, which is formed by Ni‐N doping‐intercalation the first coordination shell, motivates the superiority in synergistic N–Ni–N connection and interfacial carrier transfer. The photocatalytic mechanistic prediction confirms that the introduced unsaturated Ni‐N coordination favorably binds with CO₂, and enhances the rate‐determining step of intermediates for CO generation.     

Ti3+ Self‐Doped Li4Ti5O12 Anchored on N‐Doped Carbon Nanofiber Arrays for Ultrafast Lithium‐Ion Storage

Omnibearing acceleration of charge/ion transfer in Li₄Ti₅O₁₂ (LTO) electrodes is of great significance to achieve advanced high‐rate anodes in lithium‐ion batteries. Here, a synergistic combination of hydrogenated LTO nanoparticles (H‐LTO) and N‐doped carbon fibers (NCFs) prepared by an electrodeposition‐atomic layer deposition method is reported. Binder‐free conductive NCFs skeletons are used as strong support for H‐LTO, in which Ti³⁺ is self‐doped along with oxygen vacancies in LTO lattice to realize enhanced intrinsic conductivity. Positive advantages including large surface area, boosted conductivity, and structural stability are obtained in the designed H‐LTO@NCF electrode, which is demonstrated with preeminent high‐rate capability (128 mAh g^?1 at 50 C) and long cycling life up to 10 000 cycles. The full battery assembled by H‐LTO@NCFs anode and LiFePO₄ cathode also exhibits outstanding electrochemical performance revealing an encouraging application prospect. This work further demonstrates the effectiveness of self‐doping of metal ions on reinforcing the high‐rate charge/discharge capability of batteries.