Poly(silyl ester)s: A new route of synthesis via the condensation of Di‐tert‐butyl ester of dicarboxylic acid with dichlorosilane

Poly(silyl ester)s were synthesized by a new route via the condensation of di‐tert‐butyl ester of dicarboxylic acid with dichlorosilane by the elimination of tert‐butyl chloride as a driving force. Three new poly(silyl ester)s with molecular weights typically ranging from 2000 to 5000 amu were produced by the condensation of di‐tert‐butyl adipate with 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl trisiloxane and di‐tert‐butyl fumarate with 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl trisiloxane or 1,3‐dichlorotetramethyl disiloxane. Each polymer was characterized with infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. This new approach showed several advantages. First, it did not require a catalyst or solvent. Second, the tert‐butyl chloride byproduct was volatile and was easily eliminated. Third, there was no reaction between the growing poly(silyl ester)s and the condensation byproduct, tert‐butyl chloride. Fourth, the monomers could be readily purified. Finally, the polymerization could be performed at relatively low temperatures and in a short time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1378–1384, 2006     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Structure and morphology of poly(β‐hydroxybutyrate) synthesized by ring‐opening polymerization of racemic (R,S)‐β‐butyrolactone with distannoxane derivatives

Predominantly syndiotactic poly((R,S)‐β‐hydroxybutyrate) (PHB) was synthesized by ring‐opening polymerization of racemic β‐butyrolactone with distannoxane derivatives as catalysts. We have studied the polymerization of (R,S)‐β‐BL using distannoxane derivatives as catalysts and the effects of polymerization time on crude yield and molecular weight of the polymers obtained. Then, a more detailed study of the characterization of polymers obtained using hydroxy‐ and ethoxy‐distannoxanes was performed. ¹³C NMR spectroscopy resolved stereosequences in synthetic PHB at the diad level for the carbonyl carbon and at the triad level for the methylene carbon. These analyses show that distannoxane catalysts produce preferentially syndiotactic polyesters (syndiotactic diads fraction from 0.56 to 0.61). Triad stereosequence distribution of PHB samples agrees favourably with the Bernoullian statistical model of chain‐end control, where ideally Φ = 4(mm) (rr)/(mr + rm)² = 1 for perfect chain‐end control. Polymer samples synthesized from distannoxane catalysts are composed of two distinct transition endotherm components with peak temperatures of approximately 42 °C and 75 °C. The formation of two melting endotherms may be due to the presence of two different crystalline structures. © 2000 Society of Chemical Industry     

Controlled/living RAFT polymerization of N‐phenyl maleimide and synthesis of its block copolymers

The controlled/living radical polymerization of N‐phenyl maleimide (NPMI) was achieved using 2,2′‐azobisisobutyronitrile as the initiator and 2‐cyanopropyl‐2‐yl dithiobenzoate as the reversible addition‐fragmentation chain transfer agent at 75°C in dichloroethane/ethylene carbonate (60/40, w/w) mixed solvent. The block copolymers of polystyrene‐b‐polyNPMI and poly(n‐butyl methacrylate)‐b‐polyNPMI were successfully prepared by chain extension from dithiobenzoate‐terminated polystyrene and poly (n‐butyl methacrylate) to NPMI, respectively. The obtained NPMI‐based (co)polymers were characterized by gel permeation chromatography and ¹H‐NMR spectroscopy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study on synthesis and morphology control of poly(4‐vinylpyridine‐co‐butyl acrylate)/poly(styrene‐co‐butyl acrylate) composite microspheres

Monodispersed crosslinked cationic poly(4‐vinylpyridine‐co‐butyl acrylate) [P(4VP‐BA)] seed latexes were prepared by soapless emulsion polymerization, using 2,2′‐azobismethyl(propionamidine)dihydrochloride (V₅₀) as an initiator and divinylbenzene (DVB) or ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The optimum condition to obtain monodispersed stable latex was investigated. It was found that the colloidal stability of the P4VP latex can be improved by adding an adequate amount of BA (BA/4VP = 1/4, w/w), and adopting a semicontinuous monomer feed mode. Subsequently, poly(4‐vinylpyridine‐co‐butyl acrylate)/Poly(styrene‐co‐butyl acrylate) [P(4VP‐BA)/P(ST‐BA)] composite microspheres were synthesized by seeded polymerization, using the above latex as a seed and a mixture of ST and BA as the second‐stage monomers. The effects of the type of crosslinker, the degree of crosslinking, and the initiators (AIBN and V₅₀) on the morphology of final composite particles are discussed in detail. It was found that P(4VP‐BA)/P(ST‐BA) composite microspheres were always surrounded by a PST‐rich shell when V₅₀ was used as initiator, while sandwich‐like or popcorn‐like composite particles were produced when AIBN was employed. This is because the polarity of the polymer chains with AIBN fragments is lower than for the polymer with V₅₀ fragments, hence leading to higher interfacial tension between the second‐stage PST‐rich polymer and the aqueous phase, and between PST‐rich polymer and P4VP‐rich seed polymer. As a result, the seed cannot be engulfed by the PST‐rich polymer. Furthermore, the decrease of T_g of the second‐stage polymer promoted phase separation between the seeds and the PST‐rich polymer: sandwich‐like particles formed more preferably than popcorn‐like particles. It is important knowledge that various morphologies different from PST‐rich core/P4VP‐rich shell morphology, can be obtained only by changing the initiator, considering P4VP is much more hydrophilic than PST. The zeta potential of composite particles initiated by AIBN in seeded polymerization shifted from a positive to a negative charge. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1190–1203, 2002     

Controlled and stereospecific polymerization of rac‐lactide with a single‐site ethyl aluminum and alcohol initiating system

A single‐site ethyl aluminum complex, [2,2‐ diethyl‐1,3‐propylenebis(3,5‐di‐tert‐butyl‐salicylideneiminato)] ethyl aluminum (2), with a geminal diethyl substitutent on the diamino bridge was synthesized by the reaction of AlEt₃ with 1 equiv of N,N′‐(2,2‐diethyl‐1,3‐propylene)bis(3,5‐di‐tert‐butylsalicylideneimine). X‐ray diffraction showed that complex 2 contained a five‐coordinate aluminum atom with a distorted trigonal bipyramidal geometry in the solid state. ¹H‐NMR and ¹³C‐NMR spectra indicated that the two conformational enantiomers of 2 tautomerized quickly on the NMR timescale in solution. In the presence of isopropyl alcohol, the ring‐opening polymerization (ROP) of rac‐lactide with complex 2 produced a crystalline stereoblock polylactide (PLA). The stereoblocks contained an average of 12 units (L? = 12) of enantiomerically pure lactic acid. There was a linear relationship between the monomer conversion and number‐average molecular weights of the polymer. An induction period was observed for the polymerization. The induction period increased with decreasing concentration of catalyst 2 and isopropyl alcohol. In the presence of poly(ethylene glycol) (PEG), a PLA/PEG/PLA stereocomplex was prepared directly by the ROP of rac‐lactide with complex 2, which was confirmed by NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 102–108, 2005     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006     

The effect of synthesis methods on the mechanical properties of self‐crosslinkable poly(n‐butyl methacrylate‐co‐N‐methylolacrylamide) films

The effects of particle size and parent polymer characteristics on the mechanical properties, gel fraction, and swelling index of self‐crosslinkable poly(n‐butyl methacrylate‐co‐N‐methylolacrylamide) films made by two‐stage emulsion or microemulsion polymerization in the presence of variable amounts of the chain transfer agent, n‐butyl mercaptan, are reported here. In films prepared with latexes made by microemulsion polymerization, the crosslinking degree increased greatly on curing; by contrast, in those made by emulsion polymerization, the crosslinking degree practically did not increase after curing. Stress–strain tests of uncured and cured films indicate that microemulsion‐made films are tougher than the emulsion‐made films. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,cationic polymerization and curing reaction with epoxy resin of 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane

A new spiro ortho carbonate, 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane was prepared by the reaction of 2‐methoxybenzyl‐1,3‐propanediol with di(n‐butyl)tin oxide, following with carbon disulfide. Its cationic polymerization was carried out in dichloromethane using BF₃‐OEt₂ as catalyst. The [¹H], [¹³C]NMR and IR data as well as elementary analysis of the polymers obtained indicated that it underwent double ring‐opening polymerization. The polymerization mechanism is discussed. The curing reaction of bisphenol A type epoxy resin in the presence of the monomer and a curing agent was investigated. DSC measurements were used to follow the curing process. In the case of boron trifluoride‐o‐phenylenediamine (BF₃‐OPDA) as curing agent, two peaks were found on the DSC curves, one of which was attributed to the polymerization of the epoxy group, and the other to the copolymerization of the monomer with the isolated epoxy groups or homopolymerization. However, when BF₃‐H₂NEt was used as curing agent, only one peak was present. IR measurement of the modified epoxy resin with various weight ratios of epoxy resin/monomer was performed in the presence of BF₃‐H₂NEt as curing agent. The results demonstrate that the conversion of epoxy group increases as the content of monomer increases. The curing process and the structure of the epoxy resin network are discussed. © 2000 Society of Chemical Industry     

Methyl acrylate/1‐octene copolymers: Lewis acid‐mediated polymerization

Copolymerization of methyl acrylate (MA) with 1‐octene (1‐Oct) was conducted in the presence of free radical initiator, 2,2′‐azobis(2‐methylpropionitrile) (AIBN) using heterogeneous Lewis acid, acidic alumina. The polymers obtained were transparent and highly viscous liquids. The copolymer composition calculated from ¹H NMR showed alkene incorporation in the range of 10–61%. The monomodal nature of chromatographic curves corresponding to the molecular weight distribution in gel permeation chromatography (GPC) further confirmed that the polymers obtained are true copolymers. The number–average molecular weights (M_n) of the copolymers were in the range of 1.1 × 10⁴–1.6 × 10⁴ with polydispersity index of 1.75–2.29. The effects of varying the acidic alumina amount, time of polymerization, and monomer infeed on the incorporation of 1‐Oct in the polymer chain were studied. Increased 1‐Oct infeed led to its higher inclusion in the copolymer chain as elucidated by NMR. DEPT‐135 NMR spectral analysis was used to explicate the nature of arrangement of monomer sequences in the copolymer chain. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Modeling of “living” free‐radical polymerization processes. I. Batch,semibatch, and continuous tank reactors

A comprehensive mathematical model is developed for “living” free‐radical polymerization carried out in tank reactors and provides a tool for the study of process development and design issues. The model is validated using experimental data for nitroxide‐mediated styrene polymerization and atom transfer radical copolymerization of styrene and n‐butyl acrylate. Simulations show that the presence of reversible capping reactions between growing and dormant polymer chains should boost initiation efficiency when using free nitroxide in conjunction with conventional initiator and also increase the effectiveness of thermal initiation. A study shows the effects of the value of the capping equilibrium constant and capping reaction rate constants for both nitroxide‐mediated styrene polymerization (using alkoxyamine as polymer chain seeds) and atom transfer radical polymerization of n‐butyl acrylate (using methyl 2‐bromopropionate as chain extension seeds). Also the effect of introducing additional conventional initiator into atom transfer radical polymerization of n‐butyl acrylate is studied. It is found that the characteristics of long chain growth are determined by the fast exchange of radicals between growing and dormant polymer chains. Polymerization results in batch, semibatch, and a series of continuous tank reactors are analyzed. The simulations also show that a semibatch reactor is most flexible for the preparation of polymers with controlled architecture. For continuous tank reactors, the residence time distribution has a significant effect on the development of chain architecture. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1630–1662, 2002     

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

Amphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)₂(AA)₂, was confirmed by ¹H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Ultrasonically initiated emulsion polymerization of n‐butyl acrylate

Ultrasonically initiated emulsion polymerization of n‐butyl acrylate (BA) without added initiator has been studied. The experimental results show that high conversion of BA can be reached in a short time by employing an ultrasonic irradiation technique with a high purge rate of N₂. The viscosity average molecular weight of poly(n‐butyl acrylate) (PBA) obtained reaches 5.24 × 10⁶ g mol^?1. The ultrasonically initiated emulsion polymerization is dynamic and complicated, with polymerization of monomer and degradation of polymer occurring simultaneously. An increase in ultrasound intensity leads to an increase in polymerization rate in the range of cavitation threshold and cavitation peak values. Lower monomer concentration favours enhancement of the polymerization rate. ¹H NMR, ¹³C NMR and FTIR spectroscopies reveal that there are some branches and slight crosslinking, and also carboxyl groups in PBA. Ultrasonically initiated emulsion polymerization offers a new route for the preparation of nanosized latex particles; the particle size of PBA prepared is around 50–200 nm as measured by transmission electron microscopy. © 2001 Society of Chemical Industry     

Polymerization of cyclic monomers. VII. Synthesis and radical polymerization of 1,3‐bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes

1,3‐Bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes 1 [RO: CH₃O (a), C₂H₅O (b)] were synthesized by the esterification of the corresponding 1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acids with resorcinol. The structure of the new vinylcyclopropanes was confirmed by elemental analysis and infrared (IR), ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C nuclear magnetic resonance (¹³C‐NMR) spectroscopy. The radical polymerization of difunctional 2‐vinyl‐cyclopropanes in bulk with 2,2′‐azoisobutyronitrile (AIBN) results in hard, transparent, crosslinked polymers. During the bulk polymerization of the crystalline bis[(1‐methoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzene 1a, an expansion in volume of about 1% took place. The radical solution polymerization of 1a resulted in a soluble polymer with pendant 2‐vinylcyclopropane groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1775–1782, 1999     

Biodegradable poly(ester‐ether)s: ring‐opening polymerization of D,L‐3‐methyl‐1,4‐dioxan‐2‐one using various initiator systems

The synthesis and detailed characterization of racemic 3‐methyl‐1,4‐dioxan‐2‐one (3‐MeDX) are reported. The bulk ring‐opening polymerization of 3‐MeDX, to yield a poly(ester‐ether) meant for biomedical applications, in the presence of various initiators such as tin(II) octanoate, tin(II) octanoate/n‐butyl alcohol, aluminium tris‐isopropoxide and an aluminium Schiff base complex (HAPENAlOⁱPr) under varying experimental conditions is here detailed for the first time. Polymerization kinetics were investigated and compared with those of 1,4‐dioxan‐2‐one. The studies reveal that the rate of polymerization of 3‐MeDX is less than that of 1,4‐dioxan‐2‐one. Experimental conditions to achieve relatively high molar masses have been established. Thermodynamic parameters such as enthalpy and entropy of 3‐MeDX polymerization as well as ceiling temperature have been determined. Poly(D ,L ‐3‐MeDX) is found to possess a much lower ceiling temperature than poly(1,4‐dioxan‐2‐one). Poly(D ,L ‐3‐MeDX) was characterized using NMR spectroscopy, matrix‐assisted laser desorption ionization mass spectrometry, size exclusion chromatography and differential scanning calorimetry. This polymer is an amorphous material with a glass transition temperature of about ?20 °C. Copyright © 2010 Society of Chemical Industry     

Using hydroxypropyl‐β‐cyclodextrin for the preparation of hydrophobic poly(ketoethyl methacrylate) in aqueous medium

This work was committed to the polymerization of hydrophobic ketoethyl methacrylate monomer in aqueous medium in the presence of cyclodextrin, instead of polymerizing the monomer in toxic and volatile organic solvents. For this purpose, a new ketoethyl methacrylate monomer, p‐methylphenacylmethacrylate (MPMA), was synthesized from the reaction of p‐methylphenacylbromide with sodium methacrylate in the presence of triethylbenzylammonium chloride. The monomer was identified with FTIR, ¹H and ¹³C‐NMR spectroscopies. Hydroxypropyl‐β‐cyclodextrin (HPCD) was used to form a water‐soluble host/guest inclusion complex (MPMA/HPCD) with the hydrophobic monomer. The complex was identified with FTIR and NMR techniques and polymerized in aqueous medium using potassium persulfate as initiator. During polymerization the resulting hydrophobic methacrylate polymer precipitated out with a majority of HPCD left in solution and a minority of HPCD bonded on the resulting polymer. The thus‐prepared polymer exhibited little difference from the counterparts obtained in organic solvent in number average molecular weight (M_n), polydispersity (M_w/M_n) and yield. The investigation provides a novel strategy for preparing hydrophobic ketoethyl methacrylate polymer in aqueous medium by using a monomer/HPCD inclusion complex. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and in vitro drug‐release properties of 2‐hydroxyethyl methacrylate copolymers

2‐Hydroxyethyl methacrylate was copolymerized with acrylamide, N‐vinyl‐2‐pyrrolidone, and n‐butyl methacrylate by free‐radical solution polymerization with α,α′‐azobisisobutyronitrile as an initiator at 70 ± 1°C. The average molecular weights and molar compositions of the resultant copolymers were determined with gel permeation chromatography and ¹H‐NMR spectroscopy data, respectively. Diclofenac or 2‐[(2,6‐dichlorophenyl)amino]benzene acetic acid, a nonsteroidal anti‐inflammatory drug, was chemically attached to the copolymers by transesterification reaction in the presence of N,N′‐dicyclohexylcarbodiimide to give macromolecular prodrugs. All the synthesized polymers were characterized with Fourier transform infrared, ¹H‐, and ¹³C‐NMR spectroscopy techniques. The polymer–drug conjugates were hydrolyzed in cellophane member dialysis bags containing aqueous buffered solutions (pH 8) at 37°C, and the hydrolysis solutions were detected by UV spectrophotometer at selected intervals. The results showed that the drug could be released by selective hydrolysis of the ester bond from the side chain of the drug moiety. The release profiles of the drug indicated that the hydrolytic behavior of polymeric prodrugs strongly depends on the hydrophilicity of the polymer. The results suggest that the synthesized copolymers could be useful carriers for the release of diclofenac in controlled‐release systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2403–2409, 2007     

Two‐dimensional NMR studies of styrene/n‐butyl acrylate copolymers synthesized by atom transfer radical polymerization

Copolymers of styrene and n‐butyl acrylate were prepared by atom transfer radical polymerization (ATRP) using CuBr/N,N,N′,N′,N″‐pentamethyl‐diethylenetriamine as catalyst and Methyl 2‐bromopropionate as initiator. The polydispersity of the copolymers is quite low (1.1–1.3). ¹³C {¹H} NMR spectra of these copolymers show that the methylene and methine signals of the main chain are compositional sensitive and highly overlapped. Even the distortionless enhancement by polarization transfer (DEPT) was not able to assign the complex and overlapping signals. Assignments of the various resonance signals were done with the help of heteronuclear single quantum coherence (HSQC), total correlation spectroscopy (TOCSY), and heteronuclear multiple bond correlation (HMBC) experiments. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Study on microemulsion polymerization of N‐butyl maleimide

By using sodium dodecyl sulfate (SDS) as an emulsifier, polymerization of N‐butyl maleimide (NBMI) was carried out in ternary oil‐in‐water microemulsion, initiated with potassium persulfate (KPS). The kinetics of microemulsion polymerization were measured by dilatometry. The effects of initiator concentration, polymerization temperature, monomer concentration, and emulsifier concentration on polymerization kinetics were investigated. On this basis, the polymerization kinetics were discussed. The experiment result showed that the microemulsion polymerization kinetics of N‐butyl maleimide were almost consistent with the prediction of the Smith‐Ewart theory in conventional emulsion polymerization, except that the emulsifier showed a special effect on polymerization. At the same time, the polymer was characterized by IR, ¹H‐NMR, DSC, and TGA. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 805–809, 2000     

Synthesis and characterization of a novel liquid crystalline star‐shaped polymer based on α‐CD core via ATRP

Well‐defined side‐chain liquid crystalline star‐shaped polymers were synthesized with a combination of the “core‐first” method and atom transfer radical polymerization (ATRP). Firstly, the functionalized macroinitiator based on the α‐Cyclodextrins (α‐CD) bearing functional bromide groups was synthesized, confirmed by ¹H‐NMR, MALDI‐TOF, and FTIR analysis. Secondly, the side‐chain liquid crystalline arms poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAzo) were prepared by ATRP. The characterization of the star polymers were performed with ¹H‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). It was found that the liquid crystalline behavior of the star polymer α‐CD‐PMMAzo_n was similar to that of the linear homopolymer. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased as the molecular weight increased for most of these samples. All star‐shaped polymers show photoresponsive isomerization under the irradiation with Ultraviolet light. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009