A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Influence of MEOBiPA content on the properties of novel photoluminescent thermosensitive hydrogels

In order to establish a dual functional hydrogel, a special monomer, methacryloyloxy‐ethylene‐oxy‐carbonyl bis[4‐(phenyl‐isopropyl)phenyl]amine (MEOBiPA), was prepared from bis[4‐(phenyl‐isopropyl)phenyl]‐4‐cyanophenyl amine and 2‐hydroxyethyl methacrylate. Subsequently, a series of thermosensitive hydrogels was obtained through copolymerization of N‐isopropyl acrylamide (NIPAAm) with MEOBiPA by UV irradiation (named the NM series). The effect of MEOBiPA content on the swelling behavior, mechanical properties and drug release behavior of the hydrogels was further investigated. Results showed that the swelling ratios of the NM copolymeric hydrogels decreased from 4.73 to 1.74 g g^?1 when the MEOBiPA content in the hydrogel increased from 0.1 to 0.9 mol%. Both gel strength and crosslinking density of the NM hydrogels increased with increasing MEOBiPA. Conversely, the thermosensitive behavior of NM hydrogels significantly decreased upon increase of MEOBiPA content. Likewise, the caffeine release ratio also decreased from 70% to 25%. Notably, the intensity of photoluminescence increased with increasing MEOBiPA content in the hydrogels. Further, the corresponding copolymers of the hydrogels were prepared using free radical polymerization. The UV absorbance and photoluminescent behavior of the MEOBiPA, NIPAAm/MEOBiPA copolymeric hydrogels and their corresponding copolymers in different polar solvents were also investigated. © 2015 Society of Chemical Industry     

Ultradrawing properties of ultrahigh‐ molecular‐weight polyethylene/carbon nanotube fibers prepared at various formation temperatures

The influence of formation temperature on the ultradrawing properties of ultrahigh‐molecular‐weight polyethylene/carbon nanotube (UHMWPE/CNT) fiber specimens is investigated. Gel solutions of UHMWPE/CNT with various CNT contents were gel‐spun at the optimum concentration and temperature but were cooled at varying formation temperatures in order to improve the ultradrawing and tensile properties of the UHMWPE/CNT composite fibers. The achievable draw ratio (D_ra) values of UHMWPE/CNT as‐prepared fibers reach a maximum when they are prepared with the optimum CNT content and formation temperature. The D_ra value of UHMWPE/CNT as‐prepared fibers produced using the optimum CNT content and formation temperature is about 33% higher than that of UHMWPE as‐prepared fibers produced using the optimum concentration and formation temperature. The percentage crystallinity (W_c) and melting temperature (T_m) of UHMWPE/CNT as‐prepared fiber specimens increase significantly as the formation temperature increases. In contrast, W_c increases but T_m decreases significantly as the CNT content increases. Dynamic mechanical analysis of UHMWPE and UHMWPE/CNT fiber specimens exhibits particularly high α‐transition and low β‐transition, wherein the peak temperatures of α‐transition and β‐transition increase dramatically as the formation temperature increases and/or CNT content decreases. In order to understand these interesting drawing, thermal and dynamic mechanical properties of the UHMWPE and UHMWPE/CNT as‐prepared fiber specimens, birefringence, morphological and tensile studies of as‐prepared and drawn fibers were carried out. Possible mechanisms accounting for these interesting properties are proposed. Copyright © 2010 Society of Chemical Industry     

pH‐thermoreversible hydrogels. I. Synthesis and swelling behaviors of the (N‐isopropylacrylamide‐co‐acrylamide‐co‐2‐hydroxyethyl methacrylate) copolymeric hydrogels

A series of pH‐thermoreversible hydrogels that exhibited volume phase transition was synthesized by various molar ratios of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and 2‐hydroxyethyl methacrylate (HEMA). The influence of environmental conditions such as temperature and pH value on the swelling behavior of these copolymeric gels was investigated. Results showed that the hydrogels exhibited different equilibrium swelling ratios in different pH solutions. Amide groups could be hydrolyzed to form negatively charged carboxylate ion groups in their hydrophilic polymeric network in response to an external pH variation. The pH sensitivities of these gels also depended on the AAm content in the copolymeric gels; thus the greater the AAm content, the higher the pH sensitivity. These hydrogels, based on a temperature‐sensitive hydrogel, demonstrated a significant change of equilibrium swelling in aqueous media between a highly solvated, swollen gel state and a dehydrated network response to small variations of temperature. pH‐thermoreversible hydrogels were used for a study of the release of a model drug, caffeine, with changes in temperature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 221–231, 1999     

Swelling behavior of thermoreversible poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels

Thermoresponsive hydrogels based on N‐isopropylacrylamide and N‐vinylimidazole were synthesized, and their swelling–deswelling behavior was studied as a function of the total monomer concentration. For copolymeric structures with better thermoresponsive properties with respect to poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels, these hydrogels were protonated with HCl and HNO₃, and the copolymer behaviors were compared with those of the unprotonated hydrogels. The temperature was changed from 4 to 70°C at fixed pHs and total ionic strengths. The equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all the hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1619–1624, 2004     

Effects of microgel content and n‐methylolacrylamide on the properties of microgel composite hydrogels prepared by postcrosslinking method

Acrylamide co 2‐acrylamido‐2‐methylpropane sulfonic acid microgel composite (MC) hydrogels were prepared by heating MC polymer with 50% water content. Crosslinking reaction occurred in the heating process and reactive microgels with hydroxymethyl groups introduced by N‐methylolacrylamide (NMA) were used as postcrosslinkers. Microgel swollen size is influenced by NMA content. Both microgel and its NMA content affect MC hydrogel properties, which relates to the crosslinking chain length and the crosslinking density. The tensile strength of MC hydrogels increases and their elongation decreases as the microgel content increases from 0.1 to 0.5 g. Both the tensile strength and the elongation decrease as the microgel content further increases from 0.5 to 1.1 g. The MC hydrogel tensile strength increases and the elongation decreases as the NMA content of microgels increases from 5.0 to 14.8%. However, they both decrease when the NMA content of microgels exceeds 14.8%. Although the crosslinking chains υ calculated from tensile stress–strain curves were very high, MC hydrogels were elastic and had the highest tensile strength of 127 kPa and considerably moderate elongation of 427%. Their excellent mechanical properties attributed to their unique structure crosslinked by microgel particles. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

Thermoreversible hydrogel. XVII. Investigation of the drug release behavior for [N‐isopropylacrylamide‐co‐trimethyl acrylamidopropyl ammonium iodide‐co‐3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate] copolymeric hydrogels

A series of copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm), trimethyl acrylamidopropyl ammonium iodide (TMAAI), and 3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate (DMAPS). Results showed that the swelling ratios of these copolymeric hydrogels increased with an increase of TMAAI content. The drug release behavior of the ionic thermosensitive hydrogels related to their ionicity and drug types. Results indicated that the release ratio of caffeine in the hydrogels was not affected by the ionicity of hydrogels, but increased with increasing of the swelling ratio. The anionic solute (phenol red) strongly interacted with cationic hydrogel (very large K_d), so the phenol red release ratio in cationic gels was very low. On the other hand, CV was adsorbed only on the skin layer of the cationic hydrogel because of the charge repulsion, and released rapidly. Therefore the release ratio was highest for cationic hydrogel to cationic drug. In addition, the partition coefficients (K_d) and the drug delivery behavior of the present gels were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1592–1598, 2002     

Thermo‐ and pH‐sensitive hydrogels based on 2‐(2‐methoxyethoxy)ethyl methacrylate and methacrylic acid

Hydrogels based on commercially available 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), with methacrylic acid (MAA) as comonomer, are studied. The incorporation of an ionizable monomer, such as MAA, in a thermosensitive system leads to the formation of hydrogels able to respond to pH and temperature according to their monomeric composition. Thus, at low pH, the acid groups of MAA are protonated, and they do not contribute to increase the hydrophilic balance, and collapse of the hydrogels occurs around room temperature. For temperatures below that of collapse, the degree of swelling increases with increasing MEO₂MA content. In contrast, at neutral or basic pH, the ionization of the acid groups contributes to increase the hydrophilicity and the osmotic pressure, leading to polyelectrolyte behaviour. In this regime, the swelling capacity increases and the thermosensitivity decreases with increasing MAA content in the hydrogels. These properties make poly(MEO₂MA‐co‐MAA) hydrogels suitable candidates for use in oral controlled delivery of hydrophobic drugs. This possibility is explored using ibuprofen as a model drug, after a complete study of the swelling kinetics. Copyright © 2010 Society of Chemical Industry     

Controlled mechanical and swelling properties of poly(vinyl alcohol)/sodium alginate blend hydrogels prepared by freeze–thaw followed by Ca2+ crosslinking

Poly(vinyl alcohol) (PVA)/sodium alginate (SA) blend hydrogels have immense potential for use as functional biomaterials. Understanding of influences of processing parameters and compositions on mechanical and swelling properties of PVA/SA blend hydrogels is very important. In this work, PVA/SA blend hydrogels with different SA contents were prepared by applying freeze–thaw method first to induce physical crosslinking of PVA chains and then followed by Ca²⁺ crosslinking SA chains to form interpenetrating networks of PVA and SA. The effects of number of freeze–thaw cycles, SA content and Ca²⁺ concentration on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels were investigated. The results showed that the blend hydrogels have porous sponge structure. Gel fraction, which is related to crosslink density of the blend hydrogels, increased with the increase of freeze–thaw cycles and strongly depended on SA content. The SA content exerts a significant effect on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels. The number of freeze–thaw cycles has marked impact on mechanical properties, but no obvious effect on the pH‐sensitivity of the PVA/SA blend hydrogels. Concentration of CaCl₂ aqueous solution also influences mechanical properties and pH‐sensitivity of the blend hydrogel. By altering composition and processing parameters such as freeze–thaw cycles and concentration of CaCl₂ aqueous solution, the mechanical properties and pH‐sensitivity of PVA/SA blend hydrogels can be tightly controlled. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Compressive moduli and network parameters of N‐isopropylacrylamide hydrogels copolymerized by monoesters of itaconic acid and crosslinked with tetraallylammonium bromide

The present study focuses on the mechanical properties of hydrophilically or hydrophobically modified poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels, and all discussions on their improved mechanical strengths are based on the conformational effects of hydrophobic side chains attached to the comonomers and the structural differences between the crosslinkers. Three different types of monoalkyl itaconates, bearing octyl (Oc), cetyl (Ce), and cyclohexyl (CH) groups as comonomers, were used to prepare the copolymeric PNIPAAm hydrogels crosslinked with N,N′‐methylenebisacrylamide (BIS) and tetraallylammonium bromide (TAB) as neutral tetrafunctional and ionic octafunctional crosslinkers, respectively. The most striking result is the compressive E modulus of TAB‐crosslinked PNIPAAm hydrogel containing 10 mol % of mOcI. It reaches nearly 1.0 MPa and is independent of the temperature and pH of the swelling/shrinking medium. The result was discussed in terms of the inter/intramolecular interactions between hydrophobic octyl groups adopting a rod‐like conformation in the case of 25 °C/distilled deionized water (DDW) and 37 °C/DDW combinations. Further, it was observed that the electrostatic repulsive forces between the carboxylate groups on mOcI units could be suppressed even at 37 °C and pH 9 due to the rod‐like conformations of C₈H₁₇ groups. Its micrographs under bright‐field and polarized light supported the presence of an ordered anisotropic phase and multiple associations of extended, hydrophobic side chains. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45039.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002     

Characterization of the Plasticized GAP/PEG and GAP/PCL Block Copolyurethane Binder Matrices and its Propellants

Though glycidyl azide polymer (GAP) is a well‐known and promising energetic polymer, propellants based on it suffer from poor mechanical and low‐temperature properties. To overcome these problems, plasticized GAP‐based copolymeric binders were prepared and investigated through the incorporation of flexible‐structural polyethylene glycol (PEG) and polycaprolactone (PCL) into a binder recipe under a Desmodur N‐100 polyisocyanate (N‐100)/isophorone diisocyanate (IPDI) (2 : 1, wt. ratio) mixed curative system. The nitrate esters (NEs) or GAP oligomer were used as energetic plasticizers at various ratios to the polymers. The GAP/PCL binders held the plasticizers much more than the GAP/PEG binders did. The glass transition temperatures (T_g) of segmented copolymeric binders were more dependent on the plasticizer level than the PEG or PCL content. The increase in the plasticizer content decreased the mechanical strength and modulus of binders, while the change of strain was modest. Finally, the NE plasticized GAP‐based solid propellants showed enhanced mechanical and thermal properties by the incorporation of PEG or PCL. The properties of GAP/PCL propellants were superior to those of GAP/PEG propellants.     

Synthesis and swelling properties of 2‐hydroxyethyl methacrylate‐co‐1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine hydrogels

A series of 2‐hydroxyethyl methacrylate/1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine (HEMA/VSIB) copolymeric gels were prepared from various molar ratios of HEMA and the zwitterionic monomer VSIB. The influence of the amount of VSIB in copolymeric gels on their swelling behavior in water and various saline solutions at different temperatures and the drug‐release behavior, compression strength, and crosslinking density were investigated. Experimental results indicated that the PHEMA hydrogel and the lower VSIB content (3%) in the HEMA/VSIB gel exhibited an overshooting phenomenon in their dynamic swelling behavior, and the overshooting ratio decreased with increase of the temperature. In the equilibrium water content, the value increased with increase of the VSIB content in HEMA/VSIB hydrogels. In the saline solution, the water content for these gels was not affected by the ion concentration when the salt concentration was lower than the minimum salt concentration (MSC) of poly(VSIB). When the salt concentration was higher than the MSC of poly(VSIB), the deswelling behavior of the copolymeric gel was more effectively suppressed as more VSIB was added to the copolymeric gels. However, the swelling behavior of gels in KI, KBr, NaClO₄, and NaNO₃ solutions at a higher concentration would cause an antipolyelectrolyte phenomenon. Besides, the anion effects were larger than were the cation effects in the presence of a common anion (Cl^?) with different cations and a common cation (K⁺) with different anions for the hydrogel. In drug‐release behavior, the addition of VSIB increased the drug‐release ratio and the release rate. Finally, the addition of VSIB in the hydrogel improved the gel strength and crosslinking density of the gel. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2888–2900, 2001     

Effect of porosigen and hydrophobic monomer on the fast swelling–deswelling behaviors for the porous thermoreversible copolymeric hydrogels

A series of porous thermoreversible copolymeric hydrogels were prepared from N‐isopropylacrylamide (NIPAAm) and hydrophobic monomers such as 2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate (OFPMA) and n‐butyl methacrylate (BMA) and CaCO₃ or poly(ethylene glycol) 8000 (PEG8000) as porosigen by emulsion polymerization. The effect of hydrophobic monomers and porosigens on the fundamental properties, such as equilibrium swelling ratio, swelling kinetics, gel strength, crosslinked densities, etc., and fast swelling–deswelling behavior for the present copolymeric hydrogels were investigated. Results showed that the deswelling rates for the gels porosigened by CaCO₃ were more rapid than those gels foamed by PEG8000. Results also showed that the swelling rates for the gel foamed by CaCO₃ were higher than those for the gel foamed by PEG8000. At the same time, results also showed that the gels with OFPMA foamed by CaCO₃ exhibit a faster swelling–deswelling behavior than those gels with BMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3152–3160, 2006     

A novel temperature and pH dual‐responsive hybrid hydrogel with polyhedral oligomeric silsesquioxane as crosslinker: synthesis,characterization and drug release properties

Octavinyl polyhedral oligomeric silsesquioxane (OVPS) is used as the crosslinker instead of N,N′‐methylenebisacrylamide (BIS) to copolymerize with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) or DMAEMA and N‐isopropylacrylamide (NIPAM) to prepare hybrid hydrogels: P(OVPS‐co‐DMAEMA) and P(OVPS‐co‐DMAEMA‐co‐NIPAM). The prepared hydrogels are transparent and show dual response to temperature and pH. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis and tensile tests. Their mechanical properties, swelling ratio, deswelling and reswelling behaviors as well as drug release properties were investigated. The results indicate that OVPS can be incorporated into polymer networks in proportion to feed ratios. The P(OVPS‐co‐DMAEMA) hydrogel exhibits more homogeneous interior structure, higher swelling ratio and faster response than the conventional hydrogel prepared with BIS. Moreover, the incorporation of OVPS enhances the compression and tensile properties of the hydrogels. The feed ratios of OVPS and NIPAM have a great effect on volume phase transition temperature, thermal sensitivity, swelling behavior, mechanical properties and drug release properties of the hybrid hydrogels. The prepared dual‐responsive OVPS‐containing hydrogels are expected to be used as biomedical materials in drug release and tissue engineering. © 2014 Society of Chemical Industry     

Synthesis and characterization of poly(urethane‐ester)s based on calcium salt of mono(hydroxybutyl)phthalate

Calcium‐containing poly(urethane‐ester)s (PUEs) were prepared by reacting diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and hydroxyl‐terminated poly(1,4‐butylene glutarate) [HTPBG₁₀₀₀], using di‐n‐butyltin‐dilaurate as catalyst. About six calcium‐containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:HTPBG₁₀₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4, and 1:3:4. Two blank PUEs were synthesized by the reaction of HTPBG₁₀₀₀ with diisocyanate (HMDI or TDI). The polymers were characterized by IR, ¹H NMR, Solid state ¹³C‐CP‐MAS NMR, TGA, DSC, XRD, solubility, and viscosity studies. The T_g value of PUEs increases with increase in the calcium content and decreases with increase in soft segment content. The viscosity of the calcium‐containing PUEs increases with increase in the soft segment content and decreases with increase in the calcium content. X‐ray diffraction patterns of the polymers show that the HMDI‐based polymers are partially crystalline and TDI‐based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium‐containing PUEs based on HMDI shows that with increase in the calcium content of polymer, modulus (g′ and g″) increases at any given temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1720–1727, 2006     

Thermoreversible hydrogels. IX. Swelling behaviors of thermosensitive hydrogels copolymerized by N‐isopropylacrylamide with 1‐vinyl‐3‐(3‐sulfopropyl) imidazolium betaine

A series of thermosensitive hydrogels were prepared from the various molar ratios of N‐isopropylacrylamide, 1‐vinyl‐3‐(3‐sulfopropyl) imidazolium betaine (VSIB), and N,N′‐methylene‐bis‐acrylamide. The influence of the amount of VSIB in the copolymeric gels on the swelling behaviors in water, in various saline solutions, and at various temperatures was investigated. The results indicated that the higher the VSIB content in the hydrogel system, the higher the swelling ratio and the gel transition temperature. In the saline solution the results showed that when the concentration of salt is higher than the minimum salt concentration (MSC) of poly(VSIB), the deswelling behavior of the copolymeric gel was more effectively suppressed as more VSIB was added to the copolymeric gels. In addition, only the sample containing 12 mol % VSIB (V4) exhibited an antipolyelectrolyte's swelling behavior when the concentration of salt was higher than the MSC of poly(VSIB). This means that the swelling ratio of the hydrogel can be improved with a higher concentration salt solution. In addition, the anion effects were larger than the cation effects in the presence of a common anion (Cl⁻) with different cations and a common cation (K⁺) with different anions for the hydrogel. Finally, the more VSIB in the hydrogel, the higher the diffusion coefficient in dynamic swelling. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 14–23, 2000     

Thermoreversible hydrogels. XIX. Synthesis and swelling behavior and drug release behavior for the N‐isopropylacrylamide/poly(ethylene glycol) methylether acrylate copolymeric hydrogels

A series of thermosensitive copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and poly(ethylene glycol) methylether acrylate (PEGMEA_n), which was synthesized from acryloyl chloride and poly(ethylene glycol) mono methylether with three oxyethylene chain lengths. Investigation of the effect of the chain length of oxyethylene in PEGMEA_n, and the amount of the PEGMEA_n in the NIPAAm/PEGMEA_n copolymeric gels, on swelling behavior in deionized water was the main purpose of this study. Results showed that the swelling ratio for the present copolymeric gels increased with increasing chain length of oxyethylene in PEGMEA_n and also increased with increase in the amount of PEGMEA_n in the copolymeric gels. However, the gel strength and effective crosslinking density of these gels decreased with increase in swelling ratio. Some kinetic parameters were also evaluated in this study. Finally, the drug release and drug delivery behavior for these gels were also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1683–1691, 2003     

Electrically conductive and mechanically tough graphene nanocomposite hydrogels with self‐oscillating performance

Conventional hydrogels are extremely brittle, fragile and poorly conductive, which limits their applications in a variety of aspects. In this study, we fabricated a novel kind of nanocomposite self‐oscillating hydrogel poly(AA‐co‐Fe(phen)₃)/PVA/RGO with high conductivity and good mechanical strength by dispersing reduced graphene oxide (RGO). Due to the synergetic effect of RGO dispersed in the hydrogels or dry gels and Fe metal which is the reduction product of the Fe(phen)₃ moiety by RGO, the hydrogels have a high conductivity of 18.2 S m^?1 with 0.67 wt% RGO content. The dispersed RGO in the hydrogels combined with the network structure by means of hydrogen bonding, π–π stacking and electrostatic interaction and was demonstrated to enhance the mechanical properties of the hydrogels. The elastic modulus achieves 65.2 kPa (1020% of the tensile strength) and 236.4 kPa (with 70% compression), respectively. In addition, the prepared hydrogels exhibit a self‐oscillating behavior in a Belousov–Zhabotinsky solution free of catalyst. These results can be broadly applied in the future in the development of an autonomous on–off switching, flexible/stretchable, graphene‐based soft electronic device. © 2019 Society of Chemical Industry     

Effect of montmorillonite on the properties of thermosensitive poly(N‐isopropylacrylamide) composite hydrogels

Thermosensitive composite hydrogels containing various amounts of sodium montmorillonite (NaMM) and poly(N‐isopropylacrylamide) (pNIPAAm) were synthesized. Their equilibrium degree of swelling (DS) was measured in NaCl solutions of different ionic strength and at various temperatures. The DS decreased when increasing the clay content and no substantial shift in the phase transition temperature was noticed. The composite hydrogels investigated had a NaMM content ranging between 1.0 and 5.7 wt % (in 0.1M NaCl at 25°C). A considerable enhancement in the response to thermal stimuli was observed for NaMM contents >2–3 wt %. It is suggested that when the NaMM concentration approaches a critical value, the clay platelets can inhibit the formation of the hydrophobic skin layer that hinders shrinking in conventional pNIPAAm hydrogels. The effect of montmorillonite on the mechanical properties of the hydrogels was investigated by uniaxial compression tests, which showed that the modulus increases with the NaMM content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1964–1971, 2004