Preparation of well‐defined block copolymer having one polystyrene segment and another poly(styrene‐alt‐maleic anhydride) segment with RAFT polymerization

Block copolymers, polystyrene‐b‐poly(styrene‐co‐maleic anhydride), have been prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization technique using three different approaches: 1‐phenylethyl phenyldithioacetate (PEPDTA) directly as RAFT agent, mediated polystyrene (PS) block as the macromolecular PS‐RAFT agent and mediated poly(styrene‐maleic anhydride) (SMA) block with alternating sequence as the macromolecular SMA‐RAFT agent. Copolymers synthesized in the one‐step method using PEPDTA as RAFT agent possess one PS block and one SMA block with gradient structure. When the macromolecular RAFT agents are employed, copolymers with one PS block and one alternating SMA block can be produced. However, block copolymers with narrow molecular weight distribution (MWD) can only be obtained using the PS‐RAFT agent. The MWD deviates considerably from the typical RAFT polymerization system when the SMA is used as the RAFT agent. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modeling analysis of chain transfer in reversible addition‐fragmentation chain transfer polymerization

The validity of simplifying the reversible addition‐fragmentation chain transfer (RAFT) polymerization as a degenerative chain transfer process was verified in this work. The simplified chain transfer mechanism enabled the direct modeling investigation of chain transfer coefficient in the RAFT polymerization. It also gave the analytical expressions for concentration, chain length, and polydispersity of various chain species. The comparison between the simulations based on chain transfer mechanism and those from general RAFT mechanism showed that this simplified mechanism can accurately predict RAFT polymerization in the absence of side reactions to adduct radicals other than fragmentation. However, significant errors are introduced at high conversion when side reactions to adduct are present. The chain transfer coefficient of RAFT agent is the key factor in RAFT polymerization. The polydispersity is more sensitive to chain transfer coefficient at low conversion. At high conversion, however, the polydispersity is mainly determined by termination, which can be controlled by RAFT agent concentration and the selection of initiator. At last, an analytical equation is derived to directly estimate chain transfer coefficient of RAFT agent from the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

4‐Halogeno‐3,5‐dimethyl‐1H‐pyrazole‐1‐carbodithioates: versatile reversible addition fragmentation chain transfer agents with broad applicability

Pyrazole‐based dithiocarbamates are versatile reversible addition fragmentation chain transfer (RAFT) agents that provide molar mass and dispersity (? ) control over the radical polymerization of both more and less activated monomers (MAMs and LAMs). In this paper we report on theoretical and experimental findings demonstrating that their activity as RAFT agents can be significantly enhanced by introducing electron‐withdrawing substituents to the pyrazole ring. This enhancement is most noticeable in methyl methacrylate polymerization where product molar masses are more accurately predicted by the RAFT agent concentration, and significantly lower ? values, with respect to those seen with the parent RAFT agent under similar conditions, are observed. Thus, use of 4‐chloro‐3,5‐dimethyl‐1H ‐pyrazole‐1‐carbodithioate provides a poly(methyl methacrylate) with the anticipated molar mass and ? as low as 1.3 at high monomer conversion. Good control is retained for monosubstituted MAMs, styrene, methyl acrylate and N ,N ‐dimethylacrylamide. Low dispersities and less molar mass control are also achieved for homo‐ and copolymerizations with the LAM vinyl acetate, albeit with some retardation. © 2017 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Synthesis of alkyne‐terminated xanthate RAFT agents and their uses for the controlled radical polymerization of N‐vinylpyrrolidone and the synthesis of its block copolymer using click chemistry

Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X₃) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X₄) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X₃ showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X₃ showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (M_n) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by ¹H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, ¹H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

One‐step synthesis of triarm block copolymers via simultaneous reversible‐addition fragmentation chain transfer and ring‐opening polymerization

One‐step synthesis of star copolymers by reversible addition–fragmentation chain transfer (RAFT) and ring‐opening polymerization (ROP) by using a novel dual initiator is reported. Triarm block copolymers comprising one polystyrene (or polyacrylamide) arm and two poly(β‐butyrolactone) arms were synthesized in one‐step by simultaneous RAFT polymerization of styrene (St) (or acrylamide, designated as AAm) and ROP of β‐butyrolactone (BL) in the presence of a novel trifunctional initiator, 1,2‐propanediol ethyl xanthogenate (RAFT‐ROP agent). This dual initiator was obtained through the reaction of 3‐chloro‐1,2‐propanediol with the potassium salt of ethyl xanthogenate. The principal parameters such as monomer concentration, initiator concentration, and polymerization time that affect the one‐step polymerization reaction were evaluated. The characterization of the products was achieved using Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H‐NMR), ¹³C‐nuclear magnetic resonance (¹³C‐NMR), Gas chromatography–mass spectrometry (GC–MS), gel‐permeation chromatography (GPC), thermogravimetric analysis (TGA), and fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate

In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

RAFT synthesis of poly(N‐isopropylacrylamide) and poly(methacrylic acid) homopolymers and block copolymers: Kinetics and characterization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used successfully to synthesize temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm), poly(methacrylic acid) (PMAA), and their temperature‐responsive block copolymers. Detailed RAFT polymerization kinetics of the homopolymers was studied. PNIPAAm and PMAA homopolymerization showed living characteristics that include a linear relationship between M _n and conversion, controlled molecular weights, and relatively narrow molecular weight distribution (PDI < 1.3). Furthermore, the homopolymers can be reactivated to produce block copolymers. The RAFT agent, carboxymethyl dithiobenzoate (CMDB), proved to control molecular weight and PDI. As the RAFT agent concentration increases, molecular weight and PDI decreased. However, CMDB showed evidence of having a relatively low chain transfer constant as well as degradation during polymerization. Solution of the block copolymers in phosphate buffered saline displayed temperature reversible characteristics at a lower critical solution temperature (LCST) transition of 31°C. A 5 wt % solution of the block copolymers form thermoreversible gels by a self‐assembly mechanism above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1191–1201, 2006     

RAFT polymerization of N‐vinyl pyrrolidone using prop‐2‐ynyl morpholine‐4‐carbodithioate as a new chain transfer agent

RAFT polymerization of N‐vinyl pyrrolidone (NVP) has been investigated in the presence of chain transfer agent (CTA), i.e., prop‐2‐ynyl morpholine‐4‐carbodithioate (PMDC). The influence of reaction parameters such as monomer concentration [NVP], molar ratio of [CTA]/[AIBN, i.e., 2,2′‐azobis (2‐methylpropionitrile)] and [NVP]/[CTA], and temperature have been studied with regard to time and conversion limit. This study evidences the parameters leading to an excellent control of molecular weight and molar mass dispersity. NVP has been polymerized by maintaining molar ratio [NVP]: [PMDC]: [AIBN] = 100 : 1 : 0.2. Kinetics of the reaction was strongly influenced by both temperature and [CTA]/[AIBN] ratio and to a lesser extent by monomer concentration. The activation energy (E_a = 31.02 kJ mol^?1) and enthalpy of activation (ΔH^?= 28.29 kJ mol^?1) was in a good agreement to each other. The negative entropy of activation (ΔS^? = ?210.16 J mol^‐1K^‐1) shows that the movement of reactants are highly restricted at transition state during polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymer chain extension in semibatch emulsion polymerization with RAFT‐based transfer agent: The influence of reaction conditions on polymerization rate and product properties

A mathematical model was developed for batch and semiemulsion polymerizations of styrene in the presence of a xanthate‐based RAFT agent. Zero–one kinetics was employed along with population balance equations to predict monomer conversion, molecular weight (MWD), and particle size (PSD) distributions in the presence of xanthate‐based RAFT agents. The effects of the transfer agent (AR), surfactant, initiator, and temperature were investigated. Monomer conversion, MWD, and PSD were found to be strongly affected by monomer feed rate. The polymerization rate (Rp), number average molecular weight (Mn) and particle size (r) decreased with increasing AR. With increases in surfactant and initiator concentrations Rp increased, whereas with increase in temperature Mn decreased, Rp increased and r increased. In semibatch mode, Mn and r increased with increase in monomer flow rate. By feeding the RAFT agent along with the monomer (F_M/F_AR = N_Mo/N_ARo = 100), Mn attained a constant value proportional to monomer/RAFT molar ratio. The observed retardation in polymerization and growth rates is due to the exit and re‐entry of small radicals. Thus, chain extension was successfully achieved in semibatch mode. The simulations compared well with our experimental data, and the model was able to accurately predict monomer conversion, Mn, MWD, and PSD of polymer products. Our simulations and experimental results show that monomer feed rate is suitable for controlling the PSD, and the initial concentration and the feed rate of AR for controlling the MWD and PSD. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Morpholine‐based RAFT agents for the reversible deactivation radical polymerization of vinyl acetate and N‐vinylimidazole

Reversible addition–fragmentation chain transfer (RAFT) polymerization of less‐activated monomers in a controlled fashion is challenging due to the high reactivity and instability of the propagating radicals. We have designed dithiocarbamate‐based RAFT agents with morpholine as activating ‘Z’ group and benzyl, ethyl(1‐ethanoate)yl, ethyl(2‐propanoate)yl and cyanomethyl as ‘R’ leaving groups and investigated them for the reversible deactivation radical polymerization of vinyl acetate (VAc) and N‐vinylimidazole (N‐VIm). RAFT polymerization of VAc and N‐VIm at 70 °C using azobisisobutyronitrile as a free radical initiator proceeded in a controlled fashion as demonstrated by a linear increase in molar mass with conversion. Interestingly, the polymerization of VAc followed fast kinetics (approx. 60 min) with good to moderate control affording high‐molar‐mass poly(VAc) polymers. Furthermore, the synthesized chain transfer agents were able to polymerize N‐VIm under controlled conditions. The morpholine RAFT agents bearing cyanomethyl and ethyl(2‐propanoate)yl leaving groups showed better control of the polymerization of VAc and N‐VIm compared to the others. © 2020 Society of Chemical Industry     

Preparation of poly(tert‐butyl acrylate)‐poly(acrylic acid) amphiphilic copolymers via radiation‐induced reversible addition–fragmentation chain transfer mediated polymerization of tert‐butyl acrylate

Poly(tert‐butyl acrylate) (PtBA) is a versatile hydrophobic macromolecule usually preferred in the development of new materials for a host of applications. PtBA homopolymers with well‐defined structure and controlled molecular weight in a wide range were successfully synthesized via radiation‐induced reversible addition–fragmentation chain transfer (RAFT) polymerization in the presence of a trithiocarbonate type RAFT agent. The polymerization of tBA was performed under ⁶⁰Co γ‐irradiation in the presence of 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid (DDMAT) as the RAFT agent in toluene at room temperature with three [tBA]/[DDMAT] ratios (400, 600 and 1000) and different irradiation times. Radiation‐induced polymerization of tBA displayed controlled free radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n ~ 1.1), pseudo first order kinetics and controlled molecular weights. The system followed the RAFT polymerization mechanism even at very low amounts of RAFT agent ([tBA]/[DDMAT] = 1000), and molecular weights up to 113 900 with narrow dispersity (Ð =1.06) were obtained. PtBA was further hydrolysed into different amphiphilic PtBA‐co‐poly(acrylic acid) (PAA) copolymers by low (27.5%) and high (77.3%) degrees of hydrolysis. The pH sensitivity of the two copolymers was investigated by dynamic light scattering at pH 2 and pH 9 (above and below the pK_a value of PAA) and their hydrodynamic diameters and zeta potential values were determined. © 2020 Society of Chemical Industry     

Vesicular and micellar self‐assembly of stimuli‐responsive poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) amphiphilic diblock copolymers

Dually responsive amphiphilic diblock copolymers consisting of hydrophilic poly(N‐isopropyl acrylamide) [poly(NIPAAm)] and hydrophobic poly(9‐anthracene methyl methacrylate) were synthesized by reversible addition fragmentation chain‐transfer (RAFT) polymerization with 3‐(benzyl sulfanyl thiocarbonyl sulfanyl) propionic acid as a chain‐transfer agent. In the first step, the poly(NIPAAm) chain was grown to make a macro‐RAFT agent, and in the second step, the chain was extended by hydrophobic 9‐anthryl methyl methacrylate to yield amphiphilic poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) block copolymers. The formation of copolymers with three different hydrophobic block lengths and a fixed hydrophilic block was confirmed from their molecular weights. The self‐assembly of these copolymers was studied through the determination of the lower critical solution temperature and critical micelle concentration of the copolymers in aqueous solution. The self‐assembled block copolymers displayed vesicular morphology in the case of the small hydrophobic chain, but the morphology gradually turned into a micellar type when the hydrophobic chain length was increased. The variations in the length and chemical composition of the blocks allowed the tuning of the block copolymer responsiveness toward both the pH and temperature. The resulting self‐assembled structures underwent thermally induced and pH‐induced morphological transitions from vesicles to micelles and vice versa in aqueous solution. These dually responsive amphiphilic diblock copolymers have potential applications in the encapsulation of both hydrophobic and hydrophilic drug molecules, as evidenced from the dye encapsulation studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46474.     

Kinetics of RAFT emulsion polymerization of styrene mediated by oligo(acrylic acid‐b‐styrene) trithiocarbonate

The kinetics of ab initio reversible addition‐fragmentation chain transfer (RAFT) emulsion polymerization of styrene using oligo(acrylic acid‐b‐styrene) trithiocarbonate as both polymerization mediator and surfactant were systematically investigated. The initiator concentration was set much lower than that in the conventional emulsion polymerization to significantly suppress the irreversible termination reaction. It was found that decreased rapidly but the nucleation efficiency of micelles increased with the decrease of the initiator concentrations due to the significant radical exit. The particle number ( ) did not follow the classic Smith–Eward equation but was proportional to [I]^?0.4[S]^0.7. It was suggested that RAFT emulsion polymerization could be fast enough for commercial use even at extremely low initiator concentrations and low macro‐RAFT agent concentrations due to the higher particle nucleation efficiency at lower initiator concentration. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2126–2134, 2016     

Ab initio reversible addition–fragmentation chain transfer emulsion polymerization of styrene/butyl acrylate mediated by poly(acrylic acid)‐block‐polystyrene trithiocarbonate

Ab initio reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of styrene/butyl acrylate was investigated with the trithiocarbonate macro‐RAFT agent poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) as a stabilizer and a RAFT agent. Influences of the amount of ammonium persulfate (APS), the amount of PAA‐b‐PS and the mass ratio of monomers on emulsion polymerization and film properties are discussed. The particle morphology exhibited spherical‐like structure with particles of about 90 nm in diameter and relatively narrow particle size distribution characterized using transmission electron microscopy and dynamic laser scattering. Fourier transform infrared and ¹H NMR spectra showed that the styrene/butyl acrylate emulsion was successfully synthesized. The monomer conversion increased initially with increasing amount of APS, from 0.4 up to 0.8 wt%, and then decreased. The particle size increased and its distribution decreased gradually with increasing amount of APS. The monomer conversion increased from 76.83 to 94.21% as the amount of PAA‐b‐PS increased from 3 to 4 wt%, and then decreased with further increase of PAA‐b‐PS. The particle size decreased and its distribution increased with increasing amount of PAA‐b‐PS. The water resistance and solvent resistance of the polymer films initially increased and then decreased with decreasing mass ratio of butyl acrylate to styrene. © 2014 Society of Chemical Industry     

RAFT‐mediated emulsion polymerization of chloroprene and impact of chain‐end structure on chloroprene rubbers

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of chloroprene (CP) in an emulsion system using a dithiocarbamate‐type RAFT agent was studied. The controlled RAFT‐mediated emulsion polymerization was achieved by the appropriate combination of a RAFT agent and nonionic surfactant (polyoxyethylene phenyl ether) using a water‐soluble initiator (VA‐044) at 35 °C. An almost linear first‐order kinetic plot was observed until relatively high conversion (>80%) with molecular weights between 22,300 and 33,100 and relatively narrow molecular weight distributions (M_w/M_n ≦ 1.5) were achieved. The amount of the emulsifier used and the pH of the system were found to affect the controlled character, polymerization rate, and induction period, which are related to the size of the emulsion particles. Large‐scale RAFT‐mediated emulsion polymerization was also employed to afford industrially applicable poly(CP) (M_w > 25 × 10⁴, resulting product > 2300 g). The vulcanized CP rubber obtained from the RAFT‐synthesized poly(CP) exhibited better physical properties, particularly tensile modulus and compression set, which may be due to the presence of the reactive end groups and the absence of low‐molecular‐weight products. We also evaluated the impact of the chain‐end structure on the mechanical and physical properties of these industrially important CP rubbers with carbon black. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46008.     

Highly efficient reversible addition–fragmentation chain‐transfer polymerization in ethanol/water via flow chemistry

Utilization of a flow reactor under high pressure allows highly efficient polymer synthesis via reversible addition–fragmentation chain‐transfer (RAFT ) polymerization in an aqueous system. Compared with the batch reaction, the flow reactor allows the RAFT polymerization to be performed in a high‐efficiency manner at the same temperature. The adjustable pressure of the system allows further elevation of the reaction temperature and hence faster polymerization. Other reaction parameters, such as flow rate and initiator concentration, were also well studied to tune the monomer conversion and the molar mass dispersity (?) of the obtained polymers. Gel permeation chromatography, nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopies (FTIR) were utilized to monitor the polymerization process. With the initiator concentration of 0.15 mmol L^?1, polymerization of poly(ethylene glycol) methyl ether methacrylate with monomer conversion of 52% at 100 °C under 73 bar can be achieved within 40 min with narrow molar mass dispersity (D) ? (<1.25). The strategy developed here provides a method to produce well‐defined polymers via RAFT polymerization with high efficiency in a continuous manner. © 2017 Society of Chemical Industry     

Kinetics of UV‐initiated RAFT crosslinking polymerization of dimethacrylates

The UV‐initiated RAFT polymerizations of a series of poly(ethylene glycol) dimethacrylates (PEGDMA) were investigated using differential scanning photocalorimetry (DPC) at room temperature. The rate of the RAFT system was much lower than that of a conventional free radical polymerization. A mild autoacceleration occurred as the addition reaction became diffusion controlled. The influence of the spacer length (CH₂CH₂O)_x between the vinyl moieties of the dimethacrylates on the polymerization kinetics was examined. The polymerization rate of PEGDMA decreased with an increased x value from 4 to 9, but it increased with a further increased x value from 9 to 14. Mechanical properties of the resulting polymers were also examined by dynamic mechanical analysis (DMA). It was concluded that the presence of the RAFT agent during polymerization of multifunctional monomers did not have an effect on the heterogeneity of the polymer network. In comparison with three different PEGDMAs, the PEGDMA with the longest spacer formed the most homogeneous networks with a lower crosslinking density. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

RAFT‐mediated graft polymerization of glycidyl methacrylate in emulsion from polyethylene/polypropylene initiated with γ‐radiation

The successful reversible addition‐fragmentation (RAFT)‐mediated graft polymerization of glycidyl methacrylate (GMA) in emulsion phase from polyethylene/polypropylene nonwoven fabric using 4‐cyano‐4‐[(phenylcarbonothioyl)thio]pentanoic acid under γ‐irradiation at ambient condition is reported. While conventional graft polymerization in emulsion phase yielded grafted materials with low of grafting (Dg) values [<7.5% at 10% (wt/wt) GMA], addition of RAFT agent to the graft polymerization system allowed the synthesis of polyethylene/polypropylene‐g‐poly(GMA) with more tunable Dg (8% ≤ Dg ≤ 94%) by controlling the grafting parameters. Relatively good control (PDI ～1.2 for selected grafting conditions) during polymerization was attained at 100:1 monomer‐to‐RAFT agent molar ratio. The number average molecular weight of free poly(glycidyl methacrylate) (PGMA) increased as a function of monomer conversion. NMR analyses of the free PGMA homopolymers indicate the presence of dithiobenzoate group from 4‐cyano‐4‐((phenylcarbonothioyl)thio) pentanoic acid on the polymer chain. The reactive pendant oxirane group of the grafted GMA can be modified for various environmental and industrial applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45270.     

Synthesis of polydimethylsiloxane‐containing block copolymers via reversible addition fragmentation chain transfer (RAFT) polymerization

Low polydispersity polydimethylsiloxane (PDMS) was end functionalized with a reversible addition fragmentation chain transfer (RAFT) agent by the esterification of hydroxyl terminated PDMS with a carboxylic acid functional RAFT agent. These PDMS‐RAFT agents were able to control the free radical polymerization of styrene and substituted styrene monomers to produce PDMS‐containing block copolymers with low polydispersities and targeted molecular weights. A thin film of polydimethylsiloxane‐block‐polystyrene was prepared by spin coating and exhibited a microphase separated morphology from scanning force microscopy measurements. Controlled swelling of these films in solvent vapor produced morphologies with significant long‐range order. This synthetic route will allow the straightforward production of PDMS‐containing block copolymer libraries that will be useful for investigating their thin film morphological behavior, which has applications in the templating of nanostructured materials.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010