Properties of styrene butadiene rubber (SBR)/recycled acrylonitrile butadiene rubber (NBRr) blends: The effects of carbon black/silica (CB/Sil) hybrid filler and silane coupling agent,Si69

The recycling or reuse of waste rubber by means of blending together with polymeric materials in addition of filler such as hybrid carbon black and silica (CB/Sil) to a polymer system can provides an opportunity to explore alternative product specifications. Therefore, in this work the investigation of recycled rubber blends based on styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) blends reinforced with 50/0, 40/10, 30/20, 20/30, 40/10, 0/50 phr of carbon black/silica (CB/Sil) hybrid filler treated with and without silane coupling agent (Si69) were determined. Cure characteristics, tensile properties, and morphological behavior of selected SBR/NBRr blends at a fix 85/15 blend ratio were evaluated. Results showed that, cure time t₉₀, minimum torque (M_L), and maximum torque (M_H) of CB/Sil hybrid fillers filled SBR/NBRr blends with and without Si69 increased as silica content increased. However, t₉₀ and M_L of SBR/NBRr blends with Si69 were lower than without Si69 except for (M_H). The optimum scorch time (t_s2) of SBR/NBRr blends with and without Si69 was obtained at 30/20 phr of CB/Sil hybrid filler. However, t_s2 of SBR/NBRr blends with Si69 were longer than SBR/NBRr blends without Si69. The incorporation of Si69 has improved the tensile properties [(tensile strength, elongation at break (E_b), stress at 100% elongation (M100), and stress at 300% elongation (M300)] of CB/Sil hybrid fillers filled SBR/NBRr blends. These properties were influenced by the degree of crosslinked density as the silica content is increased. Scanning electron microscopy (SEM) of the tensile fracture surfaces indicated that, with the addition of Si69 improved the dispersion of hybrid fillers and NBRr in SBR/NBRr matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A Study of FTIR,Thermal Properties and Natural Weathering Test on NBRVirgin/Recycled with SBR Blends

The effects of styrene butadiene rubber/virgin acrylonitrile butadiene rubber (SBR/NBRv) blends and styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) blends on properties such Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) were carried out. Results indicated that, based on intensity of amine peak from FTIR at 85/15 blend ratio (R15) revealed optimum formation of crosslink between SBR and NBR either using virgin or NBRr. TG thermograms of SBR/NBRv blends of all ratios showed better onset thermal stability than SBR/NBRr blends. The change in the horizontal baseline from high to low energy level occurred in virgin NBR blends because the amount of reactive sites available in virgin NBR is higher compared to NBRr. Meanwhile NBRr blends showed T_c because the amount of crosslink occurred in these blends were slightly lower than NBRv blends. Up to 25 phr of NBRr, the tensile strength and elongation at break (E_b) retention of SBR/NBRv blends was better than SBR/NBRr blends after 6 months' weathering test except for M100. The scanning electron microscopy on the surface of both blends after 6 months exposure indicated that the severity of the crack was minimal for SBR/NBRr blends compared to SBR/NBRv particularly at 50/50 blend ratio designated the SBR/NBRr blends that contained more NBRr particles could reduce the degradation towards natural weathering.     

Ethylene vinyl acetate as compatibilizer on cure characteristics and mechanical properties of (natural rubber)/(Recycled acrylonitrile‐butadiene rubber) blends

Ethylene vinyl acetate (EVA) has been used as a compatibilizer for (natural rubber)/(recycled acrylonitrile‐butadiene rubber) (NR/NBRr) blends, vulcanized by sulfur. EVA offers excellent heat, ozone, and weather resistance, whereas the vinyl acetate groups provide oil resistance to the blend. It exhibits good tear resistance and may be crosslinked. However, EVA exhibits poor low‐temperature flexibility. NBR gloves have excellent resistance to punctures, tears, and many types of chemicals, while NR has good physical and mechanical properties. NR/NBRr blends were prepared with various compositions with the EVA content fixed. Tensile properties, hardness, and swelling behavior tests were performed to determine the compatibility of NR/NBRr blends in the presence of EVA. Results indicated that incorporation of EVA into NR/NBRr blends improved tensile strength, modulus, and elongation at break compared with NR/NBRr blends without EVA. The improvement in hardness and reduction in resilience on compatibilization are due to an increase in crosslink density, which gives NR/NBRr blends better swelling resistance. Scanning electron microscopy of the fracture surfaces indicates that, with the addition of EVA in NR/NBRr blends, better adhesion between NR and NBRr was obtained, thus improving the compatibility of NR/NBRr blends. J. VINYL ADDIT. TECHNOL., 23:135–141, 2017. © 2015 Society of Plastics Engineers     

Natural Weathering Test of Styrene Butadiene Rubber and Recycled Acrylonitrile Butadiene Rubber (SBR/NBRr) Blends

The effect of recycled acrylonitrile butadiene rubber (NBRr) content of SBR/NBRr blends on natural weathering was studied. Three different size of NBRr (S1; 117–334 µm, S2; 0.85–15.0 mm and S3; direct sheeted form) were used and the blends were exposed to natural weathering for 3 and 6 months. The results indicated that the SBR/NBRr blends with smallest size of NBRr (S1) show a better retention of tensile properties, which are able to withstand better weathering than coarser size (S2 and S3) of SBR/NBRr blends. The presence of hydroxyl, carbonyl and nitro group after exposure to natural weathering was detected in FTIR analysis, which related to the UV oxidation process of rubber blends. The scanning electron microscopy proved that the SBR/NBRr blends with smallest size of NBRr (S1) with higher content of NBRr, shows a better resistant to natural weathering.     

Improvement of the homogeneity of SBR/NBR blends using polyglycidylmethacrylate‐g‐butadiene rubber

Polyglycidylmethacrylate grafted butadiene rubber (PGMA‐g‐BR) was synthesized by a graft solution copolymerization technique. The PGMA content was determined through titration against HBr. The PGMA‐g‐BR was blended with styrene butadiene rubber/butadiene acrylonitrile rubber (SBR/NBR) blends with different blend ratios. The SBR/NBR (50/50) blend was selected to examine the compatibility of such blends. Compatibility was examined using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and viscosity measurements. The scanning electron micrographs illustrate the change of morphology of the SBR/NBR rubber blend as a result of the incorporation of PGMA‐g‐BR onto that blend. The T_gs of SBR and NBR in the blend get closer upon incorporation of PGMA‐g‐BR 10 phr, which indicates improvement in blend homogeneity. The intrinsic viscosity (η) versus blend ratio graph shows a straight‐line relationship, indicating some degree of compatibility. Thermal stability of the compatibilized and uncompatibilized rubber blend vulcanizates was investigated by determination of the physicomechanical properties before and after accelerated thermal aging. Of all the vulcanizates with different blend ratios under investigation, the SBR/NBR (25/75) compatibilized blend possessed the best thermal stability. However, the SBR/NBR (75/25) compatibilized blend possessed the best swelling performance in brake fluid. The effect of various combinations of inorganic fillers on the physicomechanical properties of that blend, before and after accelerated thermal aging, was studied in the presence and absence of PGMA‐g‐BR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1559–1567, 2006     

Effect of Carbon Black/Silica Hybrid Filler on Thermal Properties,Fatigue Life,and Natural Weathering of SBR/Recycled NBR Blends

The utilization of nitrile glove waste will spark a great deal of interest in the rubber industry in developing cost-effective techniques to convert waste and used rubber into a processable form. Blends of styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) reinforced at 85/15 blend with different ratios of a carbon black/silica (CB/Sil) hybrid filler (50/0, 40/10, 30/20, 20/30, 40/10, 0/50 phr) were tested either with or without the silane coupling agent, Si69. Results showed that the increased thermal stability of blends with Si69 is highly related to the formation of crosslinks between the filler. Thermogravimetric (TG) thermograms showed that the percentage of char residue for blends with Si69 was higher than without Si69. The differential scanning calorimetry (DSC) thermograms of both blends revealed a glass transition temperature (Tg) between 65.0°C and 66.9°C. At all blend ratios, the fatigue life of blends with Si69 was better than blends without Si69. After six months’ exposure to natural weather, blends with Si69 exhibited better tensile properties, retention, and morphology compared to blends without Si69.     

Styrene butadiene rubber/epoxidized natural rubber/carbon filler nanocomposites: microstructural development and cure characterization

Microstructural development of elastomeric nanocomposites based on (50/50 wt%) styrene butadiene rubber (SBR) and epoxidized natural rubber (50 mol% epoxidation, ENR50) as the rubber matrix including two types of carbon fillers, carbon black (CB) and functionalized multiwall carbon nanotube (NH₂-MWCNT), which were prepared through melt mixing, was studied. The results from FTIR analysis show that there is interaction between functional groups on MWCNT surface and the rubber chains. The AFM analysis also indicates good dispersion of filler particles in the rubber phases. FESEM images from cryo-fractured surface of samples have revealed that nanotubes were rarely pulled out of matrix and their diameter increased, resulting from good interaction between MWCNTs and rubber chains. The DMA results confirm good interfacial interaction between them. Furthermore, the reduced difference between the two T_gs of phases (ΔT_g) shows that the incorporation of 3 phr MWCNT into the blend leads to increment in rubber phase compatibility but at higher MWCNT content (5 phr) due to lower Mooney viscosity of SBR phase, MWCNTs tend to remain in this phase. The bound rubber was adopted to characterize the polymer–filler interaction, showing that bound rubber content has an increasing trend with increasing in fillers content. The cure rheometric studies reveal that MWCNTs accelerate the cure process due to the presence of amine groups on the nanotube surface. In addition, the mechanical properties of samples show an increasing trend by increasing nano-filler content.

     

NR/SBR/organoclay nanocomposites: Effects of molecular interactions upon the clay microstructure and mechano‐dynamic properties

Nanocomposites based on (70/30) blends of natural rubber (NR), styrene‐butadiene rubber (SBR), and organoclay (OC) have been prepared successfully via melt‐mixing process. Effects of the extent of polymers/clay interactions upon the developed microstructure, fatigue life, and dynamic energy loss by the nanocomposites have been investigated. Maleated EPDM (EPDM‐g‐MAH) and epoxidized NR (ENR50) were employed as compatibilizer. Nanocomposites were characterized by means of X‐ray diffractometer (XRD), transmission electron microscope (TEM), scanning electron microscope, atomic force microscopy, root mean square, and dynamic mechanical thermal analysis. EPDM‐g‐MAH showed more potential in enhancing dispersion of the clay nanolayers and their interaction with rubber phases. More potential for separating and dispersing the clay nanoplatelets with better interface enhancement was exhibited by EPDM‐g‐MAH as compatibilizer. This was consistent with higher resistance towards large strain cyclic deformations along with more heat build‐up characteristics showed by EPDM‐g‐MAH based nanocomposites especially at compatibilizer/organoclay ratio of 3. Pronounced non‐terminal behavior within low frequency region was also observed for melt storage modulus of this nanocomposite, indicating higher extent of intercalation/exfoliation microstructure with reinforced interfaces than the nanocomposite generated by ENR50. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of blend ratio on Mooney scorch time of rubber blends

The Mooney scorch times of three rubber blends [epoxidized natural rubber (ENR) 50/SMR L, ENR 50/styrene butadiene rubber (SBR), and Standard Malaysian Rubber SMR L/SBR] were studied in the temperature range of 120–160°C using an automatic Mooney viscometer. N-Cyclohexyl-2-benzothiazyl sulfenamide was used as the accelerator, and the rubber formulation was based on the conventional vulcanization system. Results for the blends investigated indicate that a negative deviation of scorch time from the interpolated value was observed, especially for temperatures lower than 130°C. This observation was attributed to the induction effect of the ENR 50 in the ENR 50/SMR L and ENR 50/SBR blends to produce more activated precursors to crosslinks, thus enhancing interphase crosslinking. To a lesser extent, SMR L also exhibited such an induction effect in the SMR L/SBR blend. At 120°C, maximum induction effect occurred at around a 40% blend ratio of ENR 50 and SMR L in the respective blends. For the filled stock at 140°C, carbon black exhibited less effect on the scorch property of the blends compared to silica. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1301–1305, 1998     

Rheological behavior of blends of natural rubber and styrene–butadiene rubber latices

The rheological behavior of blends of natural rubber (NR) and styrene–butadiene rubber (SBR) latices has been studied with reference to the effects of blend ratio, shear rate, surface-active agents (casein and sodium carboxymethyl cellulose), and temperature. When the SBR content was less than 50%, the viscosities of the blends appeared to be a nonadditive function of the viscosities of the constituent homopolymers; i.e., a positive deviation was observed. This was due to the structural buildup of the SBR domains. The SBR domains underwent agglomeration and consequently so-called microflocculation took place. The viscosities of all the blends were found to decrease with increase of temperature and shear rate. The increase in temperature and shear rate marginally weakened the structural buildup as evidenced by the lowering of viscosity. As the SBR content in the system increased, the pseudoplasticity of the blend increased. Even in the presence of surface-active agents the blends showed composition-dependent positive deviation. However, surface-active agents marginally reduced the extent of structural buildup by reducing the microflocculation behavior of SBR domains. © 1995 John Wiley & Sons, Inc.     

The aggregation structure regulation of lignin by chemical modification and its effect on the property of lignin/styrene–butadiene rubber composites

The aggregation structure of lignin in aqueous solution had an important effect on the dispersion of lignin and the properties of lignin/styrene–butadiene rubber (SBR) composites. This article revealed the relationship between aggregation structure and chemical structure of modified lignin. Unmodified lignin was amorphous; however, our results showed that aldehyde‐modified lignin was transformed into spherical aggregates, while propylene‐oxide‐modified lignin self‐aggregated into supramolecular domains. The relationships between aggregation structure, filler dispersion, filler–rubber interaction, and performance were also studied by investigating the microstructure, viscoelastic behavior, and mechanical properties of lignin/SBR composites. Meanwhile, a solution to improve the coprecipitation efficiency of lignin and SBR latex was proposed. In this article, epoxidized natural rubber (ENR) was also used as compatibilizer to improve the interfacial adhesion between polar lignin and nonpolar SBR. The results showed better lignin dispersion for the ENR‐containing rubber composites, as well as superior wet skid resistance and lower rolling resistance. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45759.     

Effect of maleic anhydride‐grafted polypropylene on polypropylene/recycled acrylonitrile butadiene rubber/empty fruit bunch composite

The effect of maleic anhydride‐grafted polypropylene (PP‐g‐MAH) as a compatibilizer on the properties of polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr)/empty fruit bunch (EFB) composites were studied. The composites were melt mixed using a heated two roll mill at 180°C and a speed of 15 rpm with six different compositions (100/0/10, 80/20/10, 70/30/10, 60/40/10, 50/50/10, 40/60/10 phr). The effects of PP‐g‐MAH on mechanical, morphological and chemical properties of the PP/NBRr/EFB composites were examined. The PP‐g‐MAH compatibilized composites have higher tensile values compare to uncompatibilized composites. Scanning electron microscopy showed better adhesion between EFB and PP/NBRr matrices in the presence of PP‐g‐MAH. Better interaction was formed between EFB and PP/NBRr matrices via C‐O‐C ester bonds as indicated by FTIR analysis. J. VINYL ADDIT. TECHNOL., 24:275–280, 2018. © 2016 Society of Plastics Engineers     

Compatibilization of SBR/NBR blends using chemically modified styrene‐co‐butadiene rubber Part 2. Effect of compatibilizer loading

The present work focuses on the compatibization of styrene‐co‐butadiene rubber (SBR)/acrylonitrile‐co‐butadiene rubber (NBR) blends with dichlorocarbene modified styrene‐co‐butadiene rubber (DCSBR) as a function of concentration of compatibilizer and composition of the blend. FTIR studies, differential scanning calorimetry and dynamic mechanical analysis reveal molecular level miscibility in the blends in the presence of compatibilizer. The formation of interfacial bonding is assessed by analysis of swelling behaviour, cure characteristics, stress–strain data and mechanical properties. These studies show that the compatibilizing action of DCSBR becomes more prominent as the proportion of NBR in the blend increases. The resistance of the vulcanizate towards thermal and oil ageing improved with compatibilization. The change in technological properties is correlated with the crosslink density of the blends assessed from swelling and stress–strain data. © 2001 Society of Chemical Industry     

Effect of triblock copolymers on homogeneity,mechanical properties and swelling behavior of IIR/SBR rubber blends

The present research concerns with the preparation and characterization of isobutylene isoprene/butadiene–styrene rubber (IIR/SBR) blends with different blend ratios, in the presence and absence of styrene–isoprene–styrene (SIS) and styrene–isobutylene–styrene (SiBS) triblock copolymers to be tested as compatibilizers. Effect of the triblock copolymers on the blend homogeneity was investigated with the aid of scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) measurements. Characterization of the rubber blends was conducted by measuring the physico-mechanical properties after and before thermal aging, in presence and absence of the triblock copolymers. In addition, weight swell % in toluene, motor oil and brake fluid of the rubber blend vulcanizates was assessed. The incorporation of SIS and SiBS triblock copolymers improved the homogeneity of IIR/SBR blends as well as increased both tensile strength and elongation at break of the rubber blend vulcanizates. Of the entire blend ratios examined, IIR/SBR (25/75) blend containing SIS compatibilizer possessed the best physico-mechanical properties (12.6 MPa tensile strength and 425 % elongation at break) and (14 MPa tensile strength and 555 % elongation at break) after and before thermal aging, respectively. Utilization of SIS and SiBS triblock copolymers enhanced the thermal stability of IIR/SBR blend vulcanizates. Moreover, IIR/SBR blends of different blend ratios showed superior swelling resistance in the brake fluid. IIR/SBR (25/75) blend containing SIS compatibilizer and cured with CBS/ZDEC/S vulcanizing system possessed the best physico-mechanical properties (14.4 MPa tensile strength and 440 % elongation at break) and (16.5 MPa tensile strength and 610 % elongation at break) after and before thermal aging, respectively.     

Performance evaluation of chlorinated polyethylene compatibilized‐industrial waste‐filled acrylonitrile butadiene rubber/low‐density polyethylene blends

Chlorinated polyethylene as a compatibilizer at various levels was mixed in a Brabender^® internal mixer with different ratios of (acrylonitrile butadiene rubber)/(low‐density polyethylene) that contained industrial marble waste. Vulcanized articles were fabricated. The properties were investigated by cure characteristics, and mechanical and swelling parameters. The natural weathering impact on these properties was also evaluated within the span of 6 to 12 months. Notable improvements were recorded in the cure, and mechanical and swelling behaviors of uncompatibilized and chlorinated polyethylene compatibilized marble waste‐‐filled (acrylonitrile butadiene rubber)/(low‐density polyethylene) blends. Considerable losses in mechanical properties were found for all specimens because of environmental oxidation. J. VINYL ADDIT. TECHNOL., 22:460–469, 2016. © 2015 Society of Plastics Engineers     

A study about the structure of vulcanized natural rubber/styrene butadiene rubber blends and the glass transition behavior

A study of the thermal behavior of cured elastomeric blends of natural rubber (NR) and styrene butadiene rubber (SBR) prepared by solution blending in toluene is presented. Binary blends with different compositions of NR/SBR were produced using a conventional cure system based on sulfur and TBBS (n-t-butyl-2-benzothiazole sulfonamide as accelerator. The compounds were vulcanized at 433 K up to an optimum time of cure determined by rheometric tests. From swelling tests, the crosslink densities of the compounds were obtained and compared with those obtained in similar blends prepared by mechanical mixing. The results were analyzed in terms of the disentangling of the chain structures of the SBR and NR phases and the achieved cure state of the blend. Using differential scanning calorimetry, the glass transition temperature T_g of each blend was measured. In most compounds, the value of T_g corresponding to each phase of the blend was determined, but in some blends a single value of T_g was obtained. The variation of T_g with the composition and cure level in each phase was analyzed. On the other hand, a physical mixture of two equal parts of NR and SBR vulcanized was measured and the results were compared to those of the NR50/SBR50 cured blend. Besides, to analyze the influence of the network structure, pure NR and SBR unvulcanized samples were measured. On the basis of all the obtained results, the influence of the interphase formed in the blend between SBR and NR phases is discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mechanical and sorption properties of poly(ethylene-co-vinyl acetate)(EVA) compatibilized acrylonitrile butadiene rubber/natural rubber blend systems

Poly (ethylene-co-vinyl acetate) (EVA) has been used as a compatibilizer for heterogeneous natural rubber/acrylonitrile butadiene rubber (NR/NBR) blends. NR/NBR (50/50) blends were compatibilized with varying amounts, from 0 to 10 parts per hundred rubber (phr), of EVA. The compatibility of the blend components in presence of EVA has been evaluated in terms of mechanical and sorption characteristics. The mechanical properties were found to be improved by the addition of EVA upto 6 phr. The solvent resistance of the compatibilized samples has been observed to be higher compared to the uncompatibilized blends; attributed to the increased interfacial adhesion between the blend components. DSC studies showed a shift of glass transition temperatures of the blend components towards higher temperatures indicating increased rigidity of the matrix in presence of EVA.     

The effect of polypropylene maleic anhydride on polypropylene/(recycled acrylonitrile butadiene rubber)/(sugarcane bagasse) composite

The effect of polypropylene maleic anhydride (PPMAH) on the tensile properties and morphology of polypropylene (PP)/(recycled acrylonitrile butadiene rubber) (NBRr)/(sugarcane bagasse) (SCB) composites has been studied. Six different composites (100/0/10, 80/20/10, 70/30/10, 60/40/10, 50/50/10, and 40/60/10), with fixed 5 wt% of PPMAH compatibilizer and without PPMAH addition, were carried out. The composites were prepared through melt‐mixing technique at 180^oC for 9 min using a rotor speed of 15 rpm. The specimens were analyzed for mechanical properties and examined with scanning electron microscopy. The tensile strength was found to decrease with increasing filler content. However, tensile strength and Young's modulus of the PPMAH compatibilized composites were found to increase, while the elongation at break showed the opposite trend as compared with the control composites. The morphology results support the tensile properties and indicated a better interaction between the SCB filler and PP/NBRr matrices with the presence of PPMAH as a compatibilizer. This is due to the esterification bonding between the SCB filler and PP matrix in the presence of PP/NBRr matrices. J. VINYL ADDIT. TECHNOL., 23:228–233, 2017. © 2015 Society of Plastics Engineers     

Impact of gamma irradiation on virgin styrene butadiene rubber blended with ultrasonically devulcanized waste rubber

This investigation focused on the opportunity of devulcanizing waste Rubber (WR) by ultrasonication to study the possibility of utilized as an added substance to replace with styrene‐butadiene rubber (SBR) in preparation process with the final aim of preparation new composites. The present work expects to compare the ultrasonic technique and the previous work on devulcanization by mechano‐chemical method. The influence of the ultrasonication treatment on the WR was explored by Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy analysis revealed that ultrasonication was observed to be the best factor impacting the devulcanization procedure, this procedure suggests that use of specific levels of ultrasonic waves to the vulcanized rubber with a specific aim to accomplish a particular breaking of compound connections: scission of C‐S and S‐S bonds without break carbon–carbon (C‐C) bonds. Various blends of devulcanized WR with SBR was treatments with gamma ray then investigated and compared with find out the rubber giving the highest compatibility for compounding and revulcanization. In addition, a comparison of these results was made with the ones of raw SBR rubber compound. POLYM. ENG. SCI., 59:807–813, 2019. © 2019 Society of Plastics Engineers     

New oligomer‐bound antioxidants in natural rubber/polybutadiene rubber and natural rubber/styrene–butadiene rubber blends

New paraphenylene diamine antioxidants were prepared. The efficiency and permanence of these oligomer‐bound paraphenylene diamines were compared with those of conventional amine‐type antioxidants in elastomer blends such as natural rubber/styrene–butadiene rubber and natural rubber/polybutadiene rubber. These oligomer‐bound antioxidants showed improved aging resistance and ozone resistance in comparison with the blends containing conventional antioxidants. The liquid oligomer‐bound paraphenylene diamine could replace the plasticizer required for compounding. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 437–443, 2004