Impact modified polyamide‐6/organoclay nanocomposites: Processing and characterization

The effects of melt state compounding of ethylene‐butyl acrylate‐maleic anhydride (E‐BA‐MAH) terpolymer and/or three types of organoclays (Cloisite® 15A, 25A, and 30B) on thermal and mechanical properties and morphology of polyamide‐6 are investigated. E‐BA‐MAH formed spherical domains in the materials to which it is added, and increased the impact strength, whereas the organoclays decreased the impact strength. In general, the organoclays increased the tensile strength (except for Cloisite 15A), Young's modulus and elongation at break, but the addition of E‐BA‐MAH had the opposite effect. XRD patterns showed that the interlayer spacing for the organoclays Cloisite 25A and Cloisite 30B increased in both polyamide‐6/organoclay binary nanocomposites and in polyamide‐6/organoclay/impact modifier ternary systems. TEM analysis showed that exfoliated‐intercalated nanocomposites were formed. The crystallinities of polyamide‐6/organoclay nanocomposites were in general lower than that of polyamide‐6 (except for Cloisite 15A). In ternary nanocomposites, crystallinities generally were lower than those of polyamide‐6/organoclay nanocomposites. Cloisite 15A containing ternary nanocomposites had higher tensile and impact strengths and Young's modulus than the ternary nanocomposites prepared with Cloisite 25A and Cloisite 30B, owing to its surface hydrophobicity and compatibility with the impact modifier. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers     

Effect of dispersion state of organoclay on cellular foam structure and mechanical properties of ethylene vinyl acetate copolymer/ethylene‐1‐butenecopolymer/organoclay nanocomposite foams

In this study, our goal is to obtain lower density of ethylene‐vinyl acetate copolymer (EVA)/ethylene‐1‐butene copolymer (EtBC) foams without sacrificing mechanical properties. For this purpose EVA/EtBC/organoclay (Cloisite 15A, Closite 30B) nanocomposite foams were prepared. To investigate the effect of compatibilizer on the dispersion state of organoclay in cellular foam structure and mechanical properties of the EVA/EtBC/organoclay foams composites were prepared with and without maleic anhydride grafted EtBC (EtBC‐g‐MAH). The dispersion of organoclay in EVA/EtBC/organocaly foams was investigated by X‐ray diffraction and transmission electron microscopy. The EVA/EtBC nanocomposite foamswith the compatibilzer, especially EVA/EtBC/Cloisite 15A/EtBC‐g‐MAH foams displayed more uniform dispersion of organoclay than EVA/EtBC nanocomposite foams without the compatibilzer. As a result, EVA/EtBC/Cloisite 15A/EtBC‐g‐MAH foams have the smallest average cell size and highest 100% tensile modulus followed by EVA/EtBC/Cloisite 30B/EtBC‐g‐MAH foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3879–3885, 2007     

Preparation and characterization of poly(hydroxybutyrate‐co‐hydroxyvalerate)–organoclay nanocomposites

This study describes the microstructure and thermal and mechanical properties of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHB/HV)–organoclay nanocomposites prepared by melt intercalation using Cloisite 30B, a monotallow bis‐hydroxyethyl ammonium‐modified montmorillonite clay. X‐ray diffractometry and transmission electron microscopy analyses clearly confirm that an intercalated microstructure is formed and finely distributed in the PHB/HV copolymer matrix because PHB/HV has a strong hydrogen bond interaction with the hydroxyl group in the organic modifier of Cloisite 30B. The nanodispersed organoclay also acts a nucleating agent, increasing the temperature and rate of crystallization of PHB/HV; therefore, the thermal stability and tensile properties of the organoclay‐based nanocomposites are enhanced. These results confirm that the organoclay nanocomposite greatly improves the material properties of PHB/HV. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 525–529, 2003     

Effect of different nanoparticles on thermal,mechanical and dynamic mechanical properties of hydrogenated nitrile butadiene rubber nanocomposites

Organically modified and unmodified montmorillonite clays (Cloisite NA, Cloisite 30B and Cloisite 15A), sepiolite (Pangel B20) and nanosilica (Aerosil 300) were incorporated into hydrogenated nitrile rubber (HNBR) matrix by solution process in order to study the effect of these nanofillers on thermal, mechanical and dynamic mechanical properties of HNBR. It was found that on addition of only 4 phr of nanofiller to neat HNBR, the temperature at which maximum degradation took place (T_max) increased by 4 to 16°C, while the modulus at 100% elongation and the tensile strength were enhanced by almost 40–60% and 100–300% respectively, depending upon nature of the nanofiller. It was further observed that T_max was the highest in the case of nanosilica‐based nanocomposite with 4 phr of filler loading. The increment of storage modulus was highest for sepiolite‐HNBR and Cloisite 30B‐HNBR nanocomposites at 25°C, while the modulus at 100% elongation was found maximum for sepiolite‐HNBR nanocomposite at the same loading. A similar trend was observed in the case of another grade of HNBR having similar ACN content, but different diene level. The results were explained by x‐ray diffraction, transmission electron microscopy, and atomic force microscopy studies. The above results were further explained with the help of thermodynamics. Effect of different filler loadings (2, 4, 6, 8, and 16 phr) on the properties of HNBR nanocomposites was further investigated. Both thermal as well as mechanical properties were found to be highest at 8 phr of filler loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influence of the relative amounts of crystalline and amorphous phases on the mechanical properties of polyamide-6 nanocomposites

The relative amounts of amorphous and crystalline γ- and α-phases in polyamide-6 nanocomposites, estimated from the deconvolution of X-ray diffraction peaks using Gaussian functions, correlates with their mechanical, thermomechanical, and barrier properties. The incorporation of organoclay platelets (Cloisite 15A and 30B) induced the crystallization of the polymer in the γ form at expense of the amorphous phase, such that 1–2 wt % of Cloisite is enough to enhance the mechanical and the thermomechanical properties. However, higher nanofiller loads were necessary to achieve good barrier effects, because this property is mainly dependent on the tortuous path permeation mechanism of the gas molecules through the nanocomposite films. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

UV-cured clay/based nanocomposite topcoats for wood furniture. Part II: Dynamic viscoelastic behavior and effect of relative humidity on the mechanical properties

Topcoat constituting multi-layer coatings for wood furniture used in high humidity environments, like bathrooms, must have not only good barrier properties, but also good mechanical properties. Three different types of commercial organoclays, namely Cloisite 10A (C10A), Cloisite 15A (C15A) and Cloisite 30B (C30B), were chosen in this study as reinforcing agents. These nanoparticles were dispersed (1 and 3 wt% into the formulation) into a commercial epoxy acrylate oligomer by means of a three roll mill. Samples obtained from free standing UV-cured coatings were used for mechanical assessments. Mechanical tests were performed in both dynamic and static mode in order to investigate the viscoelastic behavior and tensile properties of coatings. Results from dynamic mechanical analysis have shown that all nanocomposite coatings have higher (72–75 °C) glass transition temperature compared to that observed (71 °C) in unreinforced coatings. The restriction of polymer chains mobility, due to the presence of layered silicate nanoparticles, has been used to explain the increase of glass transition temperature related to the decrease of the free volume. The storage modulus for nanocomposites containing 3 wt% of C10A, C15A and C30B was found to be slightly higher than that observed in pure coatings. The analysis of tensile stress–strain curves has revealed that tensile properties are affected by relative humidity (RH) due to the plasticization effect of humidity. In fact, results have shown that regardless of the organoclay type, the increase of RH decreases both Young's modulus and tensile strength while increasing maximum strain. We believe that low interfaces between photocrosslinked polymer chains and organoclays explain the lack of any effect of organoclays on both storage and Young's moduli. Among samples from each type of UV-cured coating tested at 0, 20 and 80% of RH, regardless of the organoclay type and content, only samples tested (tensile tests in static mode) at RH = 80% were broken. SEM images obtained from the fractured surface of these samples have shown that unreinforced UV-cured coatings and nanocomposite coatings are respectively characterized by smooth and rough fracture surface.     

Epoxy/acrylonitrile-butadiene-styrene copolymer/clay ternary nanocomposite as impact toughened epoxy

Epoxy resins have low impact strength and poor resistance to crack propagation, which limit their many end use applications. The main objective of this work is to incorporate both acrylonitrile-butadiene-styrene copolymer (ABS) and organically modified clay (Cloisite 30B) into epoxy matrix with the aim of obtaining improved material with the impact strength higher than neat epoxy, epoxy/clay and epoxy/ABS hybrids without compromising the other desired mechanical properties such as tensile strength and modulus. Impact and tensile properties of binary and ternary systems were investigated. Tensile strength, elongation at break and impact strength were increased significantly with incorporation of only 4 phr ABS to epoxy matrix. For epoxy/clay nanocomposite with 2.5% clay content, tensile modulus and strength, and impact strength were improved compared to neat epoxy. With incorporation of 2.5% clay and 4 phr ABS into epoxy matrix, 133% increase was observed for impact strength. Ternary nanocomposite had impact and tensile strengths greater than values of the binary systems. Morphological properties of epoxy/ABS, epoxy/clay and epoxy/ABS/clay ternary nanocomposite were studied using atomic force microscopy (AFM) phase imaging, scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). New morphologies were achieved for epoxy/ABS and epoxy/ABS/clay hybrid materials. Exfoliated clay structure was obtained for epoxy/clay and epoxy/ABS/clay nanocomposite.     

Polyethylene/Ethylene Vinyl Acetate and Ethylene Octene Copolymer/Clay Nanocomposite Films: Different Processing Conditions and Their Effect on Properties

Polymer nanocomposites based on a layered clay used as nanofiller and copolymers ethylene and vinyl acetate matrix (EVA, the content of vinyl acetate (VA) component 19 wt% and 5 wt%) and ethylene octene copolymer (EOC, 17% and 45% of octene) were prepared. KO Buss kneader and double screw extruder were used. The MMT Na+ and four types of commercial products such as Nanofil N5 and N3000, Cloisite 93A and 30B were used as nanofillers—5 wt% in relation to the content of montmorillonite. The aim was to evaluate the influence of copolymer composition and processing on prepared nanocomposite properties. The morphology of samples was examined by means of X‐ray diffraction (XRD) and transmission electronic microscopy TEM. Furthermore, mechanical and especially barrier properties were observed. Despite the fact that the XRD and microscopy results have revealed that complete exfoliation did not take place in any case, mechanical properties as well as the permeability showed that used 5 wt% of clay was enough to achieve the improvement of properties. Cloisite 30B might be the most suitable for the polyethylene/EVA matrix. In case of EOC copolymer the nanofiller Nanofil N3000 and mainly Cloisite 93A seems to be more suitable. The better properties were achieved for the version of EVA with lower VA content and also for EOC 17, but not for each evaluated property. POLYM. ENG. SCI., 59:2514–2521, 2019. © 2019 Society of Plastics Engineers     

Effect of organoclay on the morphology,mechanical, and thermal properties of polyimide/organoclay nanocomposite foams

A series of polyimide (PI)/organoclay nanocomposite foams containing different contents of organoclay were prepared by the monomer in situ intercalative polymerization. The effect of organoclay on the chemical structure, morphology, mechanical, and thermal properties of the nanocomposite foams was studied. Fourier transform infrared spectra showed that the hydrogen bonds between organoclay and the polymer matrix were formed. X‐ray diffraction and transmission electron microscope results indicated that the organoclay were well dispersed in the PI matrix. The compressive strength and tensile strength of the nanocomposite foams enhanced significantly, especially for the nanocomposite foam containing 4 wt% organoclay, increasing by 15% and 9%, respectively, compared with these of the neat PI foam, and the presence of the organoclay in the PI foam improved apparently the cellular structure of the nanocomposite foams. Besides, thermogravimetric analysis revealed that the addition of organoclay improved the thermal stability of the nanocomposite foams strongly, and dynamic mechanical analysis indicated that the incorporation of organoclay significantly influenced the storage modulus of the nanocomposite foams. POLYM. COMPOS., 35:2311–2317, 2014. © 2014 Society of Plastics Engineers     

Properties of Waterborne Polyurethane/Clay Nanocomposite Adhesives

A series of waterborne polyurethane (WBPU)/clay nanocomposite dispersions using two different organically modified clays, namely Cloisite 15A and Cloisite 30B, were prepared. It was found that the properties of WBPU/clay nanocomposites were highly dependent on both the clay content and the clay surface characteristic (hydrophilic/hydrophobic). A WBPU/clay nanocomposite dispersion with a higher clay content showed a less negative zeta potential. A lower zeta potential for dispersion with Cloisite 30B compared to Cloisite 15A was observed indicating a higher stability of the dispersion. The tensile strength, Young's modulus and adhesive strength of WBPU/clay nanocomposite containing Cloisite 30B were also higher than those of nanocomposite containing Cloisite 15A. The optimum clay contents, with respect to these properties, for nanocomposites with Cloisite 15A and Cloisite 30B were found to be 2 wt% and 3 wt%, respectively.     

Synthesis and characterization of epoxy based nanocomposites

Epoxy‐clay nanocomposites were synthesized to examine the effects of the content and type of different clays on the structure and mechanical properties of the nanocomposites. Diglycidyl ether of bisphenol‐A (epoxy) was reinforced by 0.5–11 wt % natural (Cloisite Na⁺) and organically modified (Cloisite 30B) types of montmorillonite. SEM results showed that as the clay content increased, larger agglomerates of clay were present. Nanocomposites with Cloisite 30B exhibited better dispersion and a lower degree of agglomeration than nanocomposites with Cloisite Na⁺. X‐ray results indicated that in nanocomposites with 3 wt % Cloisite 30B, d‐spacing expanded from 18.4 Å (the initial value of the pure clay) to 38.2 Å. The glass transition temperature increased from 73°C, in the unfilled epoxy resin, to 83.5°C in the nanocomposite with 9 wt % Cloisite 30B. The tensile strength exhibited a maximum at 1 wt % modified clay loading. Addition of 0.5 wt % organically modified clay improved the impact strength of the epoxy resin by 137%; in contrast, addition of 0.5 wt % unmodified clay improved the impact strength by 72%. Tensile modulus increased with increasing clay loading in both types of nanocomposites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1081–1086, 2005     

Effect of compatibilizer and organoclay content on structure,thermal, and mechanical properties of poly(butylene succinate)/(Ethylene acrylic acid)/Organoclay nanocomposites

Poly(butylene succinate) (PBS)/(ethylene acrylic acid) (EAA)/organoclay nanocomposites were prepared by using the melt intercalation technique. EAA was used as compatibilizer and organoclay was used as inorganic filler. X‐ray diffraction and transmission electron microscopy results indicated the addition of compatibilizer led to a large increase in basal spacing of nanocomposites and better overall dispersion of organoclay in the PBS matrix. However, the basal spacing was found to be invariant as the organoclay content increased. The differential scanning calorimetry analyses revealed that the incorporation of the organoclay and EAA and the variation of organoclay content altered the melting behavior and crystallization properties of PBS. Storage and loss modulus of virgin matrix increased with the incorporation of organoclay and EAA, and a maximum for the nanocomposite with 9 wt% organoclay. Moreover, the glass transition temperatures also increased for the various organoclay‐containing samples. Mechanical properties showed an increase with the incorporation of organoclay and EAA. The 5 wt% organoclay‐filled PBS gave the highest tensile strength and notched Izod impact strength among all the composites. Further increments in organoclay loading reduced the tensile strength and notched impact strength of nanocomposites, which was thought to be the result of agglomeration. However, increments in clay loading enhanced the flexural strength and flexural modulus of nanocomposites, with a maximum at 9 wt% organoclay. J. VINYL ADDIT. TECHNOL., 23:219–227, 2017. © 2015 Society of Plastics Engineers     

Synergistic reinforcement of NBR by hybrid filler system including organoclay and nano‐CaCO3

Rubber nanocomposites containing one type of nanofiller are common and are widely established in the research field. In this study, nitrile rubber (NBR) based ternary nanocomposites containing modified silicate (Cloisite 30B) and also nano‐calcium carbonate (nano‐CaCO₃) were prepared using a laboratory internal mixer (simple melt mixing). Effects of the hybrid filler system (filler phase have two kind of fillers) on the cure rheometry, morphology, swelling, and mechanical and dynamic–mechanical properties of the NBR were investigated. Concentration of nano‐CaCO₃ [0, 5, 10, and 15 parts per one hundred parts of rubber by weight (phr)] and organoclay (0, 3, and 6 phr) in NBR was varied. The microstructure and homogeneity of the compounds were confirmed by studying the dispersion of nanoparticles in NBR via X‐ray diffraction and field emission scanning electron microscopy. Based on the results of morphology and mechanical properties, the dual‐filler phase nanocomposites (hybrid nanocomposite) have higher performance in comparison with single‐filler phase nanocomposites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42744.     

Polyamide 66 binary and ternary nanocomposites: Mechanical and morphological properties

Polyamide 66 (PA 66)/impact modifier blends and polyamide/organoclay binary and PA 66/organoclay/impact modifier ternary nanocomposites were prepared by the melt‐compounding method, and the effects of the mixing sequences on the morphology and mechanical and flow properties were investigated. Lotader AX8840 and Lotader AX8900 were used as impact modifiers. The concentrations of the impact modifiers and the organoclay (Cloisite 25A) were maintained at 2 and 5 wt %, respectively. Both the binary and ternary nanocomposites displayed high tensile strength and Young's modulus values compared to the PA 66/impact modifier blends. Decreases occurred in the strength and stiffness of the binary nanocomposites upon incorporation of the elastomeric materials into the polymeric matrix. In general, the mixing sequence in which all three ingredients were added simultaneously and extruded twice (the All‐S mixing sequence) exhibited the most enhanced mechanical properties in comparison with the mixing sequences in which two of the components were extruded in the first extrusion step and the third ingredient was added in the second extrusion step. The mechanical test results were in accordance with the organoclay dispersion. The impact strength was highly affected by the elastomeric domain sizes, interdomain distances, interfacial interactions, and organoclay delamination. The smallest elastomeric domain size was obtained for the All‐S mixing sequence, whereas the elastomeric domain sizes of the other mixing sequences were quite close to each other. Drastic variations were not observed between the melt viscosities of the ternary nanocomposites prepared with different mixing sequences. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of nanofillers as reinforcement agents for lignin composite fibers

Biobased nanocomposites and composite fibers were prepared from organosolv lignin/organoclay mixtures by mechanical mixing and subsequent melt intercalation. Two organically‐modified montmorillonite (MMT) clays with different ammonium cations were used. The effect of organoclay varying from 1 to 10 wt % on the mechanical and thermal properties of the nanocomposites was studied. Thermal analysis revealed an increased in T_g for the nanocomposites as compared with the original organosolv lignin. For both organoclays, lignin intercalation into the silicate layers was observed using X‐ray diffraction (XRD). The intercalated hybrids exhibited a substantial increase in tensile strength and melt processability. In the case of organoclay Cloisite 30B, X‐ray analysis indicates the possibility of complete exfoliation at 1 wt % organoclay loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The Effect of ultra‐high speed twin screw extrusion on ABS/organoclay nanocomposite blend properties

Acrylonitrile butadiene styrene (ABS) nanocomposites containing Cloisite 11 organoclay at 2 wt% were prepared using a 60 L/D ultra‐ high speed twin screw extruder (TSE), with speeds ranging from 400 to 4000 rpm. The purpose of this study was to investigate the effect of high shear melt processing on the intercalation and exfoliation of organoclay in the polymer, as well as the mechanical and rheological properties of the material. X‐ray Diffraction (XRD), and Transmission Electron Microscopy (TEM) results showed better intercalation of the nanofiller with increasing screw speed up to a point, and indicated an exfoliated structure of the nanocomposites extruded at 4000 rpm. Mechanical and rheological testing results indicated that by adding organoclay to ABS, the properties improved with increasing screw speed up to an optimum value of 2000 rpm. However, at the higher screw speeds of 3000 and 4000 rpm, the intense shear history led to a decrease in properties, most likely due to chain scission and molecular weight reduction. Similar trends were observed in rheological properties of the nanocomposite as well. At 2000 rpm, the results indicate that the lowering of the molecular weight due to shear effects is balanced by good intercalation/exfoliation of the organoclay. POLYM. ENG. SCI., 57:60–68, 2017. © 2016 Society of Plastics Engineers     

Preparation of polyethylene‐octene elastomer/clay nanocomposite and microcellular foam processed in supercritical carbon dioxide

Polyethylene‐octene elastomer (POE)/organoclay nanocomposite was prepared by melt mixing of the POE with an organoclay (Cloisite 20A) in an internal mixer, using poly[ethylene‐co‐(methyl acrylate)‐co‐(glycidyl methacrylate)] copolymer (E‐MG‐GMA) as a compatibilizer. X‐ray diffraction and transmission electron microscopy analysis revealed that an intercalated nanocomposite was formed and the silicate layers of the clay were uniformly dispersed at a nanometre scale in the POE matrix. The nanocomposite exhibited greatly enhanced tensile and dynamic mechanical properties compared with the POE/clay composite without the compatibilizer. The POE/E‐MA‐GMA/clay nanocomposite was used to produce foams by a batch process in an autoclave, with supercritical carbon dioxide as a foaming agent. The nanocomposite produced a microcellular foam with average cell size as small as 3.4 µm and cell density as high as 2 × 10¹¹ cells cm^?3. Copyright © 2005 Society of Chemical Industry     

Effect of modified layered silicates on the confined crystalline morphology and thermomechanical properties of poly(ethylene oxide) nanocomposites

In this work, poly(ethylene oxide) (PEO)/organoclay nanocomposites with three different types of nanoclays (Cloisite 30B, Somasif JAD400, and Somasif JAD230) were prepared by melt mixing with a laboratory kneader followed by compression molding. The nanocomposites were characterized by atomic force microscopy and scanning electron microscopy. Their crystallization behavior on a hot stage was investigated with polarized optical microscopy. The size and regularity of the spherulites of the PEO matrix were altered significantly by the incorporation of Cloisite 30B, but there was not as much variation with the other two clays. The dynamic viscoelastic behavior of the PEO/organoclay nanocomposites was assessed with a strain‐controlled parallel‐plate rheometer. The effects of clay modification on the thermomechanical and rheological properties were addressed. The reinforcing effect of the organoclay was determined with dynamic mechanical analysis and tensile testing. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Investigation on the melt spinning fibers of PP/organoclay nanocomposites prepared by in‐situ polymerization

Fibers prepared by melt spinning process from the PP (polypropylene)/organoclay nanocomposite were characterized in details with the aid of SEM, FTIR, XRD, DSC, and mechanical measurements. The results suggested that the lower content of organoclay (0.1%) added to the PP matrix increased the crystallinity and mechanical property (tensile strength) of the PP/organoclay nanocomposite fiber. With increasing the content of organoclay (≥ 0.3%), the crystallinity and the tensile strength both a little decreased, and the fiber containing organoclay exhibited multi‐peaks at the same draw ratio during the heating process. Furthermore, the degree of orientation of the fiber increased a little with lower content of organoclay (0.1%) introduction to PP during the infrared dichroism measurement. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies of particle dispersion in plasticized poly(vinyl chloride)/montmorillonite nanocomposites

Poly(vinyl chloride)(PVC) and dioctyl phthalate (DOP) were mixed with 5 and 10 wt % of Cloisite Na⁺, Cloisite 30B or Cloisite 93A. The obtained nanocomposites were characterized by thermal analysis using a thermogravimetric analyzer which showed that addition of 5 wt % of nanoclay to PVC increased its thermal stability in the sequence: Cloisite Na⁺< Cloisite 93A< Cloisite 30B. The electrical conductivity of these composites was studied as a function of temperatures and showed that the conductivity of PVC was enhanced upon using 5 wt % of nanoclay in the sequence: Cloisite Na⁺< Cloisite 30B < Cloisite 93A. The activation energy of interaction of PVC with nanoclay was found to be lowest for the composite containing 5 wt % of nanoclay in the same sequence. The tensile strength, elongation (%), and Young's modulus were considerably enhanced upon increasing the clay content to 5 wt % in the sequence: Cloisite Na⁺< Cloisite 93A < Cloisite 30B. X‐ray diffraction (XRD) and scanning electron microscopy (SEM) were used to study these nanocomposite structures, and it was found that the organoclay layers are homogeneously dispersed in the PVC matrix when 5 wt % of Cloisite 30B or Cloisite 93A was used. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012