Study of the solvent effect on miscibility between poly(vinyl chloride) and poly(methyl methacrylate) in the solution state – viscometric measurements

In this work, the solvent effect on the miscibility between poly(vinyl chloride) (PVC) and poly(methyl methacrylate) (PMMA) in ternary polymer solutions was examined by the viscometric method. In these systems, we could understand that the used solvents, tetrahydrofuran (THF) or N,N‐dimethylformamide (DMF), mainly affect the interaction between PVC and PMMA, while prompting various miscible properties. In PVC/PMMA/THF solution, THF is a near θ‐solvent and a poor solvent for PVC and PMMA, respectively. The mixing of the tighter PMMA coils and more extended PVC coils in THF may cause the sea–island heterogeneous structure below the weight fraction of PMMA in the polymer mixture w_PMMA = 0.7, resulting in immiscible PVC/PMMA mixtures. At w_PMMA ≥ 0.7, the PVC/PMMA mixtures are relatively miscible, giving homogeneous polymer solutions. It means that the miscibility between PVC and PMMA depends on the composition of polymer mixture. However, due to the similar affinity of DMF to PVC and PMMA, PVC/PMMA/DMF solutions exhibit high miscibility between PVC and PMMA at about w_PMMA = 0.5. © 2000 Society of Chemical Industry     

Miscibility study of poly(vinyl chloride)/poly(methyl methacrylate‐co‐4‐vinylpyridine) by viscosimetry,DSC, and FTIR

The miscibility of the poly(vinyl chloride)/poly(methylmethacrylate) system were improved by introducing pyridine units into poly(methylmethacrylate) main. For this purpose, we have synthesized through a radical polymerization a series of methylmethacrylate‐co‐vinyl‐4‐pyridine copolymers of different compositions and carried out a comparative study by viscosimetry, differential scanning calorimetry, and Fourier transform infrared spectroscopic (FTIR) methods. The viscosimetric analysis using the Krigbaum‐Wall, K. K. Chee, and Compos approaches revealed that, the Poly(vinyl chloride)/poly(methylmethactylate‐co‐4‐vinylpyridine)(PVC/MMA4VP‐15) at 15 wt % of 4‐vinylpyridine systems in tetrahydrofuran are completely miscible in all proportions. The differential scanning calorimetry analysis confirmed the miscibility of these systems in all proportions by the appearance of only one glass transition temperature between those of the two pure constituents. The Kwei and Schneider approaches showed also the miscibility of this system, which is due to the specific interactions between the acidic hydrogen atom of PVC and the nitrogen of MMA4VP‐15. The use of FTIR method has confirmed the occurrence of this kind of interactions by broadening and shifting of the involved functional groups vibration bands. In this work, we have also carried out a preliminary test of sorption of THF aqueous solution by PVC and PVC/MMA4VP‐15 blend membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(styrene‐co‐acrylonitrile)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) with approximately the same molecular weight were mixed separately with poly(styrene‐co‐acrylonitrile) (abbreviated as PSAN) containing 25 wt % of acrylonitrile in tetrahydrofuran to make three polymer blend systems. Differential scanning calorimetry (DSC) was used to study the miscibility of these blends. The results showed that the tacticity of PMMA has a definite impact on its miscibility with PSAN. The aPMMA/PSAN and sPMMA/PSAN blends were found to be miscible because all the prepared films were transparent and showed composition dependent glass transition temperatures (T_gs). The glass transition temperatures of the two miscible blends were fitted well by the Fox equation, and no broadening of the glass transition regions was observed. The iPMMA/PSAN blends were found to be immiscible, because most of the cast films were translucent and had two glass transition temperatures. Through the use of a simple binary interaction model, the following comments can be drawn. The isotactic MMA segments seemed to interact differently with styrene and with acrylonitrile segments from atactic or syndiotactic MMA segments. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2894–2899, 1999     

Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(vinyl pyrrolidone)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMA) (designated iPMMA, aPMMA, and sPMMA) with approximately the same molecular weight were mixed separately with poly(vinyl pyrrolidone) (PVP) primarily in chloroform to make three polymer blend systems. Differential scanning calorimetry (DSC) was used to study the miscibility of these blends. The results showed that the tacticity of PMMA has a definite impact on its miscibility with PVP. The aPMMA/PVP and sPMMA/PVP blends were found to be miscible because all the prepared films showed composition-dependent glass-transition temperatures (T_g). The glass-transition temperatures of the aPMMA/PVP blends are equal to or lower than weight average and can be qualitatively described by the Gordon–Taylor equation. The glass-transition temperatures of the other miscible blends (i.e., sPMMA/PVP blends) are mostly higher than weight average and can be approximately fitted by the simplified Kwei equation. The iPMMA/PVP blends were found to be immiscible or partially miscible based on the observation of two glass-transition temperatures. The immiscibility is probably attributable to a stronger interaction among isotactic MMA segments because its ordination and molecular packing contribute to form a rigid domain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3190–3197, 2001     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Free volume microprobe studies on poly(methyl methacrylate)/poly(vinyl chloride) and poly(vinyl chloride)/polystyrene blends

Blends of Poly(methyl methacrylate) (PMMA)/Poly(vinyl chloride) (PVC) and Poly(vinyl chloride) (PVC)/Polystyrene (PS) of different compositions were prepared by solution casting technique. The blends were characterized using Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), and Positron Lifetime Spectroscopy. DSC data were found to be inadequate to describe whether PMMA/PVC blends are miscible or not, possibly because of the small gap in their glass transition temperatures. On the other hand, PVC/PS blends were clearly found to be immiscible by DSC. FTIR results for PMMA/PVC indicate the possible interactions between the carbonyl group of PMMA and α‐hydrogen of PVC. Free volume data derived from Positron lifetime measurements showed that the PMMA/PVC blends to be miscible in low PVC concentration domain. For the first time, the authors have evaluated the hydrodynamic interaction parameter α, advocated by Wolf and Schnell, Polymer, 42, 8599 (2001), to take into account the friction between the component molecules using the free volume data. This parameter (α) has a high value (?57) at 10 wt% of PVC, which could be taken to read miscibility for PMMA/PVC blends to be high. In the case of PVC/PS blends, the positron results fully support the DSC data to conclude the blends to be immiscible throughout the range of concentration. As expected, the hydrodynamic interaction parameter α does not show any change throughout the concentration in PVC/PS blends, further supporting the idea that α is another suitable parameter in the miscibility study of polymer blends. POLYM. ENG. SCI., 46:1231–1241, 2006. © 2006 Society of Plastics Engineers     

Biodegradable blends of high molecular weight poly(ethylene oxide) with poly(3‐hydroxypropionic acid) and poly(3‐hydroxybutyric acid): a miscibility study by DSC,DMTA and NMR spectroscopy

The miscibility of high molecular weight poly(ethylene oxide) blends with poly(3‐hydroxypropionic acid) and poly(3‐hydroxybutyric acid) (P(3HB)) has been investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and high‐resolution solid state ¹³C nuclear magnetic resonance (NMR). The DSC thermal behaviour of the blends revealed that the binary blends of poly(ethylene oxide)/poly(3‐hydroxypropionic acid) (OP blends) were miscible over the whole composition range while the miscibility of poly(ethylene oxide)/poly(3‐hydroxybutyric acid) blends (OB blends) was dependent on the blend composition. OB blends were found to be partly miscible at the middle P(3HB) contents (25 %, 50 %) and miscible at other P(3HB) contents (10 %, 75 % and 90 %). Single‐phase behaviour for OP blends and phase separation behaviour for OB blends were observed from DMTA. The results from NMR spectroscopy revealed that the two components in the OP50 blend were intimately mixed on a scale of about 35 nm, while the domain sizes in the OB blend with a P(3HB) content of 50 % were larger than about 32 nm. © 2000 Society of Chemical Industry     

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by melt mixing. The miscibility, crystallization behavior, mechanical properties and hydrophilicity of the ternary blends have been investigated. The high compatibility of PVDF/PMMA/PVP ternary blends is induced by strong interactions between the carbonyl groups of the PMMA/PVP blend and the CF₂ or CH₂ group of PVDF. According to the Fourier transform infrared and wide‐angle X‐ray difffraction analyses, the introduction of PMMA does not change the crystalline state (i.e. α phase) of PVDF. By contrast, the addition of PVP in the blends favors the transformation of the crystalline state of PVDF from non‐polar α to polar β phase. Moreover, the crystallinity of the PVDF/PMMA/PVP ternary blends also decreases compared with neat PVDF. Through mechanical analysis, the elongation at break of the blends significantly increases to more than six times that of neat PVDF. This confirms that the addition of the PMMA/PVP blend enhances the toughness of PVDF. Besides, the hydrophilicity of PVDF is remarkably improved by blending with PMMA/PVP; in particular when the content of PVP reaches 30 wt%, the water contact angle displays its lowest value which decreased from 91.4° to 51.0°. Copyright © 2011 Society of Chemical Industry     

Miscible blends containing bacterial poly(3‐hydroxyvalerate) and poly(p‐vinyl phenol)

The miscibility of poly(3‐hydroxyvalerate) (PHV)/poly(p‐vinyl phenol) (PVPh) blends has been studied by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The blends are miscible as shown by the existence of a single glass transition temperature (T_g) and a depression of the equilibrium melting temperature of PHV in each blend. The interaction parameter was found to be −1.2 based on the analysis of melting point depression data using the Nishi–Wang equation. Hydrogen‐bonding interactions exist between the carbonyl groups of PHV and the hydroxyl groups of PVPh as evidenced by FTIR spectra. The crystallization of PHV is significantly hindered by the addition of PVPh. The addition of 50 wt % PVPh can totally prevent PHV from cold crystallization. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 383–388, 1999     

Influence of tacticity of poly(methyl methacrylate) on the compatibility with poly(vinyl phenol)

Isotactic, atactic, and syndiotactic poly(methyl methacrylate) (PMMA) were mixed with poly(vinyl phenol) (PVPh) separately in tetrahydrofuran to make three polymer blend systems. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the miscibility of these blends. Isotactic PMMA was found to be more miscible with PVPh than atactic or syndiotactic PMMA. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1773–1780, 1997     

Miscibility of block copolymers of poly(ε‐caprolactone) and poly(ethylene glycol) with poly(3‐hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(ε‐caprolactone) and poly(3‐hydroxybutyrate)

Atactic poly(3‐hydroxybutyrate) (a‐PHB) and block copolymers of poly(ethylene glycol) (PEG) with poly(ε‐caprolactone) (PCL‐b‐PEG) were synthesized through anionic polymerization and coordination polymerization, respectively. As demonstrated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) measurements, both chemosynthesized a‐PHB and biosynthesized isotactic PHB (i‐PHB) are miscible with the PEG segment phase of PCL‐b‐PEGs. However, there is no evidence showing miscibility between both PHBs and the PCL segment phase of the copolymer even though PCL has been block‐copolymerized with PEG. Based on these results, PCL‐b‐PEG was added, as a compatibilizer, to both the PCL/a‐PHB blends and the PCL i‐PHB blends. The blend films were obtained through the evaporation of chloroform solutions of mixed components. Excitingly, the improvement in mechanical properties of PCL/PHB blends was achieved as anticipated initially upon the addition of PCL‐b‐PEG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2600–2608, 2001     

Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(vinyl acetate)

The results of the miscibility between the chemically similar polymers poly(methyl methacrylate) (PMMA) and poly(vinyl acetate) (PVAc) published so far show inconsistent statements concerning miscibility. The problems may be due to differences in molecular weights, tacticity, and preparation methods of the polymers. This investigation was carried out by using either chloroform or tetrahydrofuran (THF) as solvent to prepare the blends, because to our knowledge, nobody has reported any tacticity effect of PMMA on the miscibility with PVAc. Therefore, in this article, different tactic PMMAs were used to mix with PVAc and their miscibility was studied calorimetrically. The results showed little effect of solvent and tacticity. PMMA and PVAc were determined to be almost completely immiscible because of the observation of two T_g's. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 35–39, 2004     

Viscoelastic properties of blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) having various acrylonitrile contents

Dynamic viscoelastic properties of blends of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) with various AN contents were measured to evaluate the influence of SAN composition, consequently χ parameter, upon the melt rheology. PMMA/SAN blends were miscible and exhibited a terminal flow region characterized by Newtonian flow, when the acrylonitrile (AN) content of SAN ranges from 10 to 27 wt %. Whereas, PMMA/SAN blends were immiscible and exhibited a long time relaxation, when the AN content in SAN is less than several wt % or greater than 30 wt %. Correspondingly, melt rheology of the blends was characterized by the plots of storage modulus G′ against loss modulus G″. Log G′ versus log G″ plots exhibited a straight line of slope 2 for the miscible blends, but did not show a straight line for the immiscible blends because of their long time relaxation mechanism. The plateau modulus, determined as the storage modulus G′ in the plateau zone at the frequency where tan δ is at maximum, varied linearly with the AN content of SAN irrespective of blend miscibility. This result indicates that the additivity rule holds well for the entanglement molecular weights in miscible PMMA/SAN blends. However, the entanglement molecular weights in immiscible blends should have “apparent” values, because the above method to determine the plateau modulus is not applicable for the immiscible blends. Effect of χ parameter on the plateau modulus of the miscible blends could not be found. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Binary blends of poly(vinyl chloride) stabilized by lithium acetate‐thermal studies

A series of blends of poly(vinyl chloride) (PVC) with (1) poly(methyl methacrylate) (PMMA) or (2) polyoxymethylene (POM), with lithium acetate as a stabilizing agent, was investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), either alone or coupled with Fourier transform infrared (FTIR) spectroscopy. It was found that lithium acetate has a significant effect on the thermal properties of blends under investigation. It causes the initial decomposition temperatures to increase by about 60–150°C for PVC–POM blends, a substantial suppression of the volatile products evolution for PVC/PMMA blends, and an improvement in the surface morphology for both polymer systems by lowering the degree of roughness. The origin of these effects was discussed by analysis of the intermolecular complexation between metal salt and PVC structural arrangements in the blends. Such interactions may lead to the formation of long‐range, directional‐specific structural regularities, which in turn thermally stabilize the whole system (strong interactions model). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2576–2587, 1999     

Influence of the tacticity of poly(methyl methacrylate) on the miscibility with poly(vinyl chloride)

It can be concluded from the work of Schurer et al.¹⁰ that poly(vinyl chloride) (PVC) is more miscible with syndiotactic than with isotactic poly(methyl methacrylate) (PMMA). By choosing different molar masses for the various tactic forms of PMMA it is possible to obtain blends with PVC with similar phase behaviour, i.e. in all cases a cloud-point curve with a minimum in the vicinity of 190°C. In this way a more quantitative statement about the influence of the tacticity of PMMA on its miscibility with PVC can be made. One of the principal differences between syndiotactic or atactic PMMA and isotactic PMMA is the higher flexibility of the latter. Using Flory's equation of state theory it will be shown that the effect of this difference is large enough to explain the difference in phase behaviour observed. Heats of mixing of low molar mass analogues were also measured and found to be negative.     

Miscibility and thermal behavior of poly(vinyl chloride)/feather keratin blends

Various poly(vinyl chloride) (PVC)/feather keratin (FK) blends were prepared via a solution blending method in the presence of N,N‐dimethylformamide as a solvent. The miscibility of the blends was studied with different analytical methods, such as dilute solution viscometry, differential scanning calorimetry, refractometry, and atomic force microscopy. According to the results obtained from these techniques, it was concluded that the PVC/FK blend was miscible in all the studied compositions. Specific interactions between carbonyl groups of the FK structure and hydrogen from the chlorine‐containing carbon of the PVC were found to be responsible for the observed miscibility on the basis of Fourier transform infrared spectroscopy. Furthermore, increasing the FK content in the blends resulted in their miscibility enhancement. The thermal stability of the samples, as an important characteristic of biobased polymer blends, was finally examined in terms of their FK weight percentage and application temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermal decomposition behavior of γ‐irradiated poly(vinyl acetate)/poly(methyl methacrylate) miscible blends

Miscible polymer blends based on various ratios of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were prepared in film form by the solution casting technique using benzene as a common solvent. The thermal decomposition behavior of these blends and their individual homopolymers before and after γ‐irradiation at various doses (50–250 kGy) was investigated. The thermogravimetric analysis technique was utilized to determine the temperatures at which the maximum value of the rate of reaction (T_max) occurs and the kinetic parameters of the thermal decomposition. The rate of reaction curves of the individual homopolymers or their blends before or after γ‐ irradiation displayed similar trends in which the T_max corresponding to all polymers was found to exist in the same position but with different values. These findings and the visual observations of the blend solutions and the transparency of the films gave support to the complete miscibility of these blends. Three transitions were observed along the reaction rate versus temperature curves; the first was around 100–200°C with no defined T_max, which may arise from the evaporation of the solvent. The second T_max was in the 340–380°C range, which depended on the polymer blend and the γ‐irradiation condition. A third transition was seen in the rate of reaction curves only for pure PVAc and its blends with PMMA with ratios up to 50%, regardless of γ‐ irradiation. We concluded that γ‐irradiation improved the thermal stability of PVAc/PMMA blends, even though the PMMA polymer was degradable by γ irradiation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1773–1780, 2006     

Effect of the composition of structured rubber particles on the toughness of poly(methylmethacrylate)

Composite natural rubber (NR) and monodisperse poly(n-butylacrylate) (PBuA) based latex particles were tested as possible impact modifiers for a poly(methylmethacrylate) (PMMA) matrix. A continuous extrusion process was used for the incorporation of wet latexes directly into a twin-screw extruder. All latexes had been coated by a PMMA shell. Furthermore, polystyrene (PS) subinclusions were introduced into the NR core. The impact resistance of the prepared PMMA blends can be most effectively improved by NR particles containing a large weight fraction of compatibilising PMMA in the shell. The degree of crosslinking of the shell polymer has to be restricted. PBuA based latex particles of 180 nm in size are ineffective to toughen the PMMA matrix. The degree of grafting of the NR phase in core–shell particles containing PS subinclusions is not crucial. Scanning electron microscopy was used to analyse the failure processes in composite rubber particle toughened PMMA blends at fast (impact conditions) and slow (tensile testing) deformation speeds.     

Investigation on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends by solution casting

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by solution casting. The crystallization behavior and hydrophilicity of ternary blends were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and contact angle test. According to morphological analysis, the surface was full of typical spherulitic structure of PVDF and the average diameter was in the order of 3 μm. The samples presented predominantly β phase of PVDF by solution casting. It indicated that the size of surface spherulites and crystalline phase had little change with the PMMA or PVP addition. Moreover, FTIR demonstrated special interactions among the ternary polymers, which led to the shift of the carbonyl stretching absorption band of PVP. On the other hand, the melting, crystallization temperature, and crystallinity of the blends had a little change compared with the neat PVDF in the first heating process. Except for the content of PVP containing 30 wt %, the crystallinity of PVDF decreased remarkably from 64% to 33% and the value of t_1/2 was not obtained. Besides, the hydrophilicity of PVDF was remarkably improved by blending with PMMA/PVP, especially when the content of PVP reached 30 wt %, the water contact angle displayed the lowest value which decreased from 98.8° to 51.0°. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The effect of composition on the dynamic and mechanical properties of natural rubber–poly(methylmethacrylate) blends

The miscibility of the components in natural rubber–poly(methylmethacrylate) blends for potential use as reinforced rubbers was evaluated using the glass transition temperatures, peak widths of the loss tangent peak at the glass transition and the complex heat capacity data obtained from dynamic mechanical thermal analysis (DMTA), and modulated differential scanning calorimetry (MDSC). In addition, the effect of the poly(methylmethacrylate) content on the dynamic mechanical and the physical properties such as tensile behavior and hysteresis loss was studied. DMTA and MDSC data clearly indicated that the blends were phase‐separated. Nevertheless, the glass transition temperature of the natural rubber component in the 30–50 wt % NR/PMMA blends has shifted to higher temperatures compared to the natural rubber treated under the same condition, indicating some limited extent of mixing of components in these blends. The physicomechanical properties including moduli at 100, 300, and 500% and tensile strength of the NR/PMMA blends were determined. Incorporation of PMMA into NR matrix improved the strength properties of the NR/PMMA blends prepared reasonably akin to interpenetrating polymer networks (IPN) polymerization method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009