A New Class of 3′‐Sulfonyl BINAPHOS Ligands: Modulation of Activity and Selectivity in Asymmetric Palladium‐Catalysed Hydrophosphorylation of Styrene

Palladium‐catalysed monophosphorylation of (R)‐2,2′‐bisperfluoroalkanesulfonates of BINOL (R^F=CF₃ or C₄F₉) by a diaryl phosphinate [Ar₂P(O)H] followed by phosphine oxide reduction (Cl₃SiH) then lithium diisopropylamide‐mediated anionic thia‐Fries rearrangement furnishes enantiomerically‐pure (R)‐2′‐diarylphosphino‐2′‐hydroxy‐3′‐perfluoralkanesulfonyl‐1,1′‐binaphthalenes [(R)‐ 8ab and (R)‐ 8g–j ], which can be further diversified by Grignard reagent (RMgX)‐mediated CF₃‐displacement [→(R)‐ 8c–f ]. Coupling of (R)‐ 8a–j with (S)‐1,1′‐binaphthalene‐2,2′‐dioxychlorophosphine (S)‐ 9 generates 3′‐sulfonyl BINAPHOS ligands (R,S)‐ 10a–j in good yields (43–82%). These new ligands are of utlility in the asymmetric hydrophosphonylation of styrene ( 1 ) by 4,4,5,5‐tetramethyl‐1,3,2‐dioxaphospholane 2‐oxide ( 2 ), for which a combination of the chiral ligands with either [Pd(Cp)(allyl)] or [Pd(allyl)(MeCN)₂]⁺/NaCH(CO₂Me)₂ proves to be a convenient and active pre‐catalyst system. A combination of an electron‐rich phosphine moiety and an electron‐deficient 3′‐sulfone moiety provides the best enantioselectivity to date for this process, affording the branched 2‐phenethenephosphonate, (−)‐iso‐ 3 , in up to 74% ee with ligand (R,S)‐ 10i , where Ar=p‐anisyl and the 3′‐SO₂R group is triflone.     

Kinetics of azo‐initiated 1‐vinyl‐2‐pyrrolidone polymerizations at low conversions in aqueous media

The free‐radical polymerization behavior of 1‐vinyl,2‐pyrrolidone (NVP) was studied at low conversions, using capillary dilatometry. The aqueous media were kept at neutral pH and the studies were conducted isothermally, at 40 or 45°C. The azo‐type initiators used were 4,4′‐azobis‐4‐cyanopentanoic acid (ACPA), 2,2′‐azobisisobutyronitrile (AZBN), and 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane dihydrochloride] (ABDH). The monomer concentration and initiator concentration ranges were 1.17–2.34 mol L⁻¹ and 1–8 mmol L⁻¹, respectively. The rates of polymerization (R_p) and orders of reaction with respect to NVP and the initiator were evaluated and the kinetic equations were found to be R_p ∝ [NVP] [ACPA]^1.2; R_p ∝ [NVP] [AZBN]^1.1; and R_p ∝ [NVP]^2.2 [ABDH]^1.1. The polymers obtained were characterized by their viscosity numbers and correlation of the viscosity average molecular weights made with the type and amount of the azo initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 239–246, 2000     

Polymerase Synthesis and Restriction Enzyme Cleavage of DNA Containing 7‐Substituted 7‐Deazaguanine Nucleobases

Previous studies of polymerase synthesis of base‐modified DNAs and their cleavage by restriction enzymes have mostly related only to 5‐substituted pyrimidine and 7‐substituted 7‐deazaadenine nucleotides. Here we report the synthesis of a series of 7‐substituted 7‐deazaguanine 2′‐deoxyribonucleoside 5′‐O‐triphosphates (dG^RTPs), their use as substrates for polymerase synthesis of modified DNA and the influence of the modification on their cleavage by type II restriction endonucleases (REs). The dG^RTPs were generally good substrates for polymerases but the PCR products could not be visualised on agarose gels by intercalator staining, due to fluorescence quenching. The presence of 7‐substituted 7‐deazaguanine residues in recognition sequences of REs in most cases completely blocked the cleavage.     

Highly Efficient and Enantioselective Iridium‐Catalyzed Asymmetric Hydrogenation of N‐Arylimines

A catalytic method employing the cationic iridium‐(S_c,R_p)‐DuanPhos [(1R,1′R,2S,2′S)‐2,2′‐di‐tert‐butyl‐2,2′,3,3′‐tetrahydro‐1H,1′H‐1,1′‐biisophosphindole] complex and BARF {tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} counterion effectively catalyzes the enantioselective hydrogenation of acyclic N‐arylimines with high turnover numbers (up to 10,000 TON) and excellent enantioselectivities (up to 98% ee), achieving the practical synthesis of chiral secondary amines.     

Highly Active and Enantioselective Rhodium‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acid to α,β‐ Unsaturated Ketone by using Electron‐Poor MeO‐F12‐BIPHEP

The asymmetric 1,4‐addition of phenylboronic acid to cyclohexenone were performed by using a low amount of rhodium/(R)‐(6,6′‐dimethoxybiphenyl‐2,2′‐diyl)bis[bis(3,4,5‐trifluorophenyl)phosphine] (MeO‐F₁₂‐BIPHEP) catalyst. Because the catalyst shows thermal resistance at 100 °C, up to 0.00025 mol% Rh catalyst showed good catalytic activity. The highest turnover frequency (TOF) and turnover number (TON) observed were 53,000 h⁻¹ and 320,000, respectively. The enantioselectivities of the products were maintained at a high level of 98% ee in these reactions. The Eyring plots gave the following kinetic parameters (ΔΔH^≠=−4.0±0.1 kcal mol⁻¹ and ΔΔS^≠=−1.3±0.3 cal mol⁻¹ K⁻¹), indicating that the entropy contribution is relatively small. Both the result and consideration of the transition state in the insertion step at the B3LYP/6‐31G(d) [LANL2DZ for rhodium] levels indicated that the less σ‐donating electron‐poor (R)‐MeO‐F₁₂‐BIPHEP could be creating a rigid chiral environment around the rhodium catalyst even at high temperature.     

Production of (R)‐3′‐fluorophenylethan‐1‐ol by Trichothecium roseum isolate in a laboratory scale bioreactor

BACKGROUND: Enantiomerically pure, fluorinated compounds play an important role in medicinal chemistry. Trichothecium roseum strains were isolated for the production of (R)‐3′‐fluorophenylethan‐1‐ol. Biocatalytic production of optically active (R)‐3′‐fluorophenylethan‐1‐ol was achieved by asymmetric reduction of 3′‐fluoroacetophenone in a batch culture of Trichothecium roseum using ram horn peptone (RHP). The reaction conditions (pH, temperature and agitation) required to improve the conversion of 3′‐fluoroacetophenone and enantiomeric excess (ee) of (R)‐3′‐fluorophenylethan‐1‐ol were studied. RESULTS: The gram scale production of (R)‐3′‐fluorophenylethan‐1‐ol by the most effective biocatalyst, Trichothecium roseum EBK‐11 using RHP was carried out in a fermenter with 1 L working volume. The results showed that the yield with >99% ee of (R)‐3′‐fluorophenylethan‐1‐ol reached 77%. The concentration of (R)‐3′‐fluorophenylethan‐1‐ol at the end of 62 h fermentation was 2.70 g L^?1. CONCLUSION: An important chiral intermediate for the pharmaceutical industry using T. roseum EBK‐11 in submerged culture containing RHP from waste material was produced up to gram scale with excellent ee (99%). In this work, T. roseum fungus was used for the first time as a biocatalyst for efficient production of a chiral alcohol. Copyright © 2009 Society of Chemical Industry     

Facile,Efficient Copolymerization of Ethylene with Bicyclic,Non‐Conjugated Dienes by Titanium Complexes Bearing Bis(β‐Enaminoketonato) Ligands

Copolymerizations of ethylene with 5‐vinyl‐2‐norbornene or 5‐ethylidene‐2‐norbornene under the action of various titanium complexes bearing bis(β‐enaminoketonato) chelate ligands of the type, [R¹NC(R²)CHC(R³)O]₂TiCl₂ ( 1 , R¹=Ph, R²=CF₃, R³=Ph; 2 , R¹=C₆H₄F‐p, R²=CF₃, R³=Ph; 3 , R¹=Ph, R²=CF₃, R³=t‐Bu; 4 , R¹=C₆H₄F‐p, R²=CF₃, R³=t‐Bu; 5 , R¹=Ph, R²=CH₃, R³=CF₃; 6 , R¹=C₆H₄F‐p, R²=CH₃, R³=CF₃), have been shown to occur with the regioselective insertion of the endocyclic double bond of the monomer into the copolymer chain, leaving the exocyclic vinyl double bond as a pendant unsaturation. The ligand modification strongly affects the copolymerization behaviour. High catalytic activities and efficient co‐monomer incorporation can be easily obtained by optimizing the catalyst structures and polymerization conditions.     

Tri‐ammonium end functional polyethylene: facile synthesis and application as an intercalation agent

Organo‐modification of montmorillonite (MMT) is crucial for the promotion of a fine dispersion of MMT into an (often hydrophobic) polymer matrix. Ammonium‐terminated polymers are more efficient in modifying clay compared to small organic cations such as alkyl ammoniums or side functionalized polymers. Herein, tri‐amino end functional polyethylene (PE‐3 N) with low molecular weight was first synthesized via an efficient and robust epoxide ring‐opening reaction by treating epoxide‐terminated PE with diethylenetriamine. The chemical structure of PE‐3 N was unambitiously characterized by chromatographic and spectral methods. By reacting with excess HCl, PE‐3 N was subsequently converted to tri‐ammonium end functional polyethylene (PE‐3 N⁺), which serves as an intercalation agent of MMT. By adjusting the weight ratio of PE‐3 N⁺ to pristine MMT (R_P/M) applied in the static melt intercalation process, correlations between the extent of exfoliation and R_P/M were successfully established. XRD results revealed that complete exfoliation of MMT could be afforded with R_P/M as low as 1, which is the lowest value ever reported for ammonium‐terminated polymers applied as intercalation agents. SEM micrographs showed that MMT sheets were swollen by PE‐3 N⁺, affirming the successful modification of MMT. The PE modified MMT obtained may find application in preparing high‐performance PE/MMT nanocomposites. © 2017 Society of Chemical Industry     

siRNA Modified with 2′‐Deoxy‐2′‐C‐methylpyrimidine Nucleosides

(2′S)‐2′‐Deoxy‐2′‐C‐methyluridine and (2′R)‐2′‐deoxy‐2′‐C‐methyluridine were incorporated in the 3′‐overhang region of the sense and antisense strands and in positions 2 and 5 of the seed region of siRNA duplexes directed against Renilla luciferase, whereas (2′S)‐2′‐deoxy‐2′‐C‐methylcytidine was incorporated in the 6‐position of the seed region of the same constructions. A dual luciferase reporter assay in transfected HeLa cells was used as a model system to measure the IC₅₀ values of 24 different modified duplexes. The best results were obtained by the substitution of one thymidine unit in the antisense 3′‐overhang region by (2′S)‐ or (2′R)‐2′‐deoxy‐2′‐C‐methyluridine, reducing IC₅₀ to half of the value observed for the natural control. The selectivity of the modified siRNA was measured, it being found that modifications in positions 5 and 6 of the seed region had a positive effect on the ON/OFF activity.     

Synthesis and characterization of conducting copolymer of Trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene with EDOT

Ferrocene‐substituted conducting polymer namely poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene‐co‐3,4‐ethylenedioxythiophene) [P(MTFE‐co‐EDOT)] was synthesized and its electrochromic properties were studied. Monomer, MTFE, was obtained using 2‐(ferrocenyl)ethene and 3‐methyl‐4‐bromothiophene. The structure of monomer was determined via Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, and ¹³C‐NMR techniques. The copolymer was synthesized using this monomer and EDOT. The resulting copolymer P(MTFE‐co‐EDOT) was characterized by cyclic voltammetry, FTIR, scanning electron microscopy, atomic force microscopy, and UV–vis spectroscopy. The conductivity measurements of copolymer and PEDOT were accomplished by the four‐probe technique. Although poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene) [P(MTFE)] reveals no electrochromic activity, its copolymer with EDOT has two different colors (violet and gray). Band gap (E_g) and λ_max of P(MTFE‐co‐EDOT) were determined. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Palladium(II) Complexes of C2‐Bridged Chiral Diphosphines: Application to Enantioselective Carbonyl‐Ene Reactions

(11bR,11′bR)‐4,4′‐(1,2‐Phenylene)bis[4,5‐dihydro‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin] [abbreviated as (R)‐BINAPHANE], (3R,3′R,4S,4′S,11bS,11′bS)‐4,4′‐bis(1,1‐dimethylethyl)‐4,4′,5,5′‐tetrahydro‐3,3′‐bi‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin [(S)‐BINAPINE], (1S,1′S,2R,2′R)‐1,1′‐bis(1,1‐dimethylethyl)‐2,2′‐biphospholane [(S,S,R,R)‐TANGPHOS] and (2R,2′R,5R,5′R)‐1,1′‐(1,2‐phenylene)bis[2,5‐bis(1‐methylethyl)phospholane] [(R,R)‐i‐Pr‐DUPHOS] are C₂‐bridged chiral diphosphines that form stable complexes with palladium(II) and platinum(II) containing a five‐membered chelate ring. The Pd(II)‐BINAPHANE catalyst displayed good to excellent enantioselectivities with ee values as high as 99.0% albeit in low yields for the carbonyl‐ene reaction between phenylglyoxal and alkenes. Its Pt(II) counterpart afforded improved yields while retaining satisfactory enantioselectivity. For the carbonyl‐ene reaction between ethyl trifluoropyruvate and alkenes, the Pd(II)‐BINAPHANE catalyst afforded both good yields and extremely high enantioselectivities with ees as high as 99.6%. A comparative study on the Pd(II) catalysts of the four C₂‐bridged chiral diphosphines revealed that Pd(II)‐BINAPHANE afforded the best enantioselectivity. The ee values derived from Pd(II)‐BINAPHANE are much higher than those derived from the other three Pd(II) catalysts. A comparison of the catalyst structures shows that the Pd(II)‐BINAPHANE catalyst is the only one that has two bulky (R)‐binaphthyl groups close to the reaction site. Hence it creates a deep chiral space that can efficiently control the reaction behavior in the carbonyl‐ene reactions resulting in excellent enantioselectivity.     

Novel and Mild Route to Phthalocyanines and 3‐Iminoisoindolin‐1‐ones via N,N‐Diethylhydroxylamine‐Promoted Conversion of Phthalonitriles and a Dramatic Solvent‐Dependence of the Reaction

Refluxing a mixture of phthalonitrile C₆R¹R²R³R⁴(CN)₂ 1 (R¹–R⁴=H), or its substituted derivatives 2 (R¹, R³, R⁴=H, R²=Me), or 3 (R¹, R⁴=H, R², R³=Cl) (1 equiv.) and N,N‐diethylhydroxylamine, Et₂NOH, (4 equivs.) in methanol for 4 h results ( Route A ) in precipitation of the symmetrical ( 6 and 8 ) and an isomeric mixture of unsymmetrical ( 7 ) phthalocyanines, isolated in good (55–65 %) yields. The reaction of phthalonitriles 1 , 2 , or 4 (R¹, R³, R⁴=H, R²=NO₂) (4 equivs.) with Et₂NOH (8 equivs.) in the presence of a metal salt MCl₂ (M=Zn, Cd, Co, Ni) (1 equiv.) in n‐BuOH or without solvent results in the formation of metallated phthalocyanine species ( 9 – 17 ). Upon refluxing in freshly distilled dry chloroform, phthalonitrile 1 or its substituted analogues 2 , 3 or 5 (R¹–R⁴=F) (1 equiv.) react with N,N‐diethylhydroxylamine (2 equivs.) affording 3‐iminoisoindolin‐1‐ones 18 – 21 ( Route B ) isolated in good yields (55–80 %). All the prepared compounds were characterized with C, H, and N elemental analyses, ESI‐MS, IR, and compounds 18 – 21 also by 1D (¹H, ¹³C{¹H}), and 2D (¹H,¹⁵N‐HMBC and ¹H,¹³C‐HMQC, ¹H,¹³C‐HMBC) NMR spectroscopy.     

Poly(2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno [3,2‐b;2',3'‐d]thiophene)/carbon nanotube composite for capacitor applications

A novel monomer, 2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno[3,2‐b;2',3'‐d]thiophene ( Th₄DTT) has been synthesized and used as an electro‐active material. It has been electropolymerized onto glassy carbon (GC) electrode in sodium dodecyl sulfate (SDS) solution (0.1 M) together with multi‐walled carbon nanotubes (MWCNT). A good capacitive characteristics for P(Th₄DTT)/MWCNT composite has been obtained by electrochemical impedance spectroscopy (EIS), which is, to our best knowledge, the first report on capacitor behavior of a dithienothiophene. A synergistic effect has been resolved by Nyquist, Bode‐magnitude—phase and admittance plots. Specific capacitance of the conducting polymer/MWCNT, calculated from cyclic voltammogram (CV) together with area and charge formulas, has been found to be 20.17 F g^?1. Long‐term stability of the capacitor has also been tested by CV, and the results indicated that, after 500 cycles, the specific capacitance is 87.37% of the initial capacitance. An equivalent circuit model of R_s(C₁(R₁(Q(R₂W))))(C₂R₃) has been obtained to fit the experimental and theoretical data. The double layer capacitance (C_dl) value of P(Th₄DTT)/MWCNT (4.43 mF cm^?2) has been found to be 25 times higher than P(Th₄DTT) (C_dl= 0.18 mF cm^?2). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40061.     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Synthesis of 3′‐Fluoro‐tRNA Analogues for Exploring Non‐ribosomal Peptide Synthesis in Bacteria

Aminoacyl‐tRNAs (aa‐tRNAs) participate in a vast repertoire of metabolic pathways, including the synthesis of the peptidoglycan network in the cell walls of bacterial pathogens. Synthesis of aminoacyl‐tRNA analogues is critical for further understanding the mechanisms of these reactions. Here we report the semi‐synthesis of 3′‐fluoro analogues of Ala‐tRNA^Ala. The presence of fluorine in the 3′‐position blocks Ala at the 2′‐position by preventing spontaneous migration of the residue between positions 2′ and 3′. NMR analyses showed that substitution of the 3′‐hydroxy group by fluorine in the ribo configuration favours the S‐type conformation of the furanose ring of terminal adenosine A76. In contrast, the N‐type conformation is favoured by the presence of fluorine in the xylo configuration. Thus, introduction of fluorine in the ribo and xylo configurations affects the conformation of the furanose ring in reciprocal ways. These compounds should provide insight into substrate recognition by Fem transferases and the Ala‐tRNA synthetases.     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

Unusual Totally Selective Cyclodimerization of Epoxides: Synthesis of a Pair of Diastereoisomers of Enantiopure 2,5‐Disubstituted‐1,4‐Dioxanes with C2 Symmetry

The synthesis of the C₂‐symmetrical (2R,5R)‐ and (2S,5S)‐2,5‐bis‐[(S)‐1‐(dibenzylaminoalkyl)]‐1,4‐dioxanes 1 or 2 in enantiopure form is reported. Compounds 1 and 2 were obtained by a completely selective and unusual cyclodimerization of chiral (2R,1′S)‐ or (2S,1′S)‐2‐(1‐aminoalkyl)epoxides 3 or 4 promoted by a mixture of diisopropylamine and boron trifluoride⋅diethyl etherate complex. The structure of the obtained dioxane was established by single‐crystal X‐ray diffraction analysis. A mechanism has been proposed to explain this transformation.     

Enantioselective Synthesis of Chiral β‐Aryloxy Alcohols by Ruthenium‐Catalyzed Ketone Hydrogenation via Dynamic Kinetic Resolution (DKR)

A highly efficient enantioselective synthesis of chiral β‐aryloxy alcohols by the {RuCl₂[(S)‐SDP][(R,R)‐DPEN]} [(S_a,R,R)‐ 1a ; SDP=7,7′‐bis(diarylphosphino)‐1,1′‐spirobiindane; DPEN=trans‐1,2‐diphenylethylenediamine] complex‐catalyzed asymmetric hydrogenation of racemic α‐aryloxydialkyl ketones via dynamic kinetic resolution (DKR) has been developed. Enantioselectivities of up to 99% ee with good to high cis/anti‐selectivities (up to>99:1) were achieved.     

O4‐Alkylated‐2‐Deoxyuridine Repair by O6‐Alkylguanine DNA Alkyltransferase is Augmented by a C5‐Fluorine Modification

Oligonucleotides containing various adducts, including ethyl, benzyl, 4‐hydroxybutyl and 7‐hydroxyheptyl groups, at the O⁴ atom of 5‐fluoro‐O⁴‐alkyl‐2′‐deoxyuridine were prepared by solid‐phase synthesis. UV thermal denaturation studies demonstrated that these modifications destabilised the duplex by approximately 10 °C, relative to the control containing 5‐fluoro‐2′‐deoxyuridine. Circular dichroism spectroscopy revealed that these modified duplexes all adopted a B‐form DNA structure. O⁶‐Alkylguanine DNA alkyltransferase (AGT) from humans (hAGT) was most efficient at repair of the 5‐fluoro‐O⁴‐benzyl‐2′‐deoxyuridine adduct, whereas the thymidine analogue was refractory to repair. The Escherichia coli AGT variant (OGT) was also efficient at removing O⁴‐ethyl and benzyl adducts of 5‐fluoro‐2‐deoxyuridine. Computational assessment of N1‐methyl analogues of the O⁴‐alkylated nucleobases revealed that the C5‐fluorine modification had an influence on reducing the electron density of the O⁴?C_α bond, relative to thymine (C5‐methyl) and uracil (C5‐hydrogen). These results reveal the positive influence of the C5‐fluorine atom on the repair of larger O⁴‐alkyl adducts to expand knowledge of the range of substrates able to be repaired by AGT.     

Free radical kinetics of N‐methyl N‐vinyl acetamide polymerization at low conversions in aqueous media

N‐methyl N‐vinyl acetamide (NMNVA) monomer was polymerized at low conversions and its free radical kinetics were detailed using capillary dilatometry. The polymerizations were conducted isothermally, at 40°C using 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl) propane dihydrochloride] (ABDH) as initiator. Monomer concentration and initiator concentration ranges were 1.10–1.70 mol · L⁻¹ and 1–4 mmol · L⁻¹, respectively. The aqueous polymerization media were kept at neutral pH. The rates of polymerization (R_p) and orders of reaction with respect to NMNVA and ABDH concentrations were evaluated and the kinetic expression was found to be ideal, with R_p ∝ [NMNVA]^1.07 [ABDH]^0.61. The polymers obtained were characterized by their viscosity numbers and correlation of viscosity average molecular weights was made with the amount of ABDH initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 337–341, 2001