Polyformamidine‐Derived Non‐Noble Metal Electrocatalysts for Efficient Oxygen Reduction Reaction

A facile approach for the template‐free synthesis of highly active non‐noble metal based oxygen reduction reaction (ORR) electrocatalysts is presented. Porous Fe?N?C/Fe/Fe₃C composite materials are obtained by pyrolysis of defined precursor mixtures of polyformamidine (PFA) and FeCl₃ as nitrogen‐rich carbon and iron sources, respectively. Selection of pyrolysis temperature (700–1100 °C) and FeCl₃ loading (5–30 wt%) yields materials with differing surface areas, porosity, graphitization degree, nitrogen and iron content, as well as ORR activity. While the ORR activity of Fe‐free materials is limited (i.e., synthesized from pure PFA), a huge increase in activity is observed for catalysts containing Fe, revealing the participation of the metal dopant in the construction of active electrocatalytic sites. Further activity improvement is achieved via acid‐leaching and repeated pyrolysis, a result which is attributed to the creation of new active sites located at the surface of the porous nitrogen‐doped carbon by dissolution of the Fe and Fe₃C nanophases. The best performing catalyst, which was synthesized with a low Fe loading (i.e., 5 wt%) and at a pyrolysis temperature of 900 °C, exhibits high activity, excellent H₂O selectivity, extended stability, in both basic and acidic media as well as a remarkable tolerance toward methanol.     

NiCo Alloy Nanoparticles Decorated on N‐Doped Carbon Nanofibers as Highly Active and Durable Oxygen Electrocatalyst

The exploring of catalysts with high‐efficiency and low‐cost for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is one of the key issues for many renewable energy systems including fuel cells, metal–air batteries, and water splitting. Despite several decades pursuing, bifunctional oxygen catalysts with high catalytic performance at low‐cost, especially the one that could be easily scaled up for mass production are still missing and highly desired. Herein, a hybrid catalyst with NiCo alloy nanoparticles decorated on N‐doped carbon nanofibers is synthesized by a facile electrospinning method and postcalcination treatment. The hybrid catalyst NiCo@N‐C 2 exhibits outstanding ORR and OER catalytic performances, which is even surprisingly superior to the commercial Pt/C and RuO₂ catalysts, respectively. The synergetic effects between alloy nanoparticles and the N‐doped carbon fiber are considered as the main contributions for the excellent catalytic activities, which include decreasing the intrinsic and charge transfer resistances, increasing C?C, graphitic‐N/pyridinic‐N contents in the hybrid catalyst. This work opens up a new way to fabricate high‐efficient, low‐cost oxygen catalysts with high production.     

Iron–Nitrogen‐Doped Vertically Aligned Carbon Nanotube Electrocatalyst for the Oxygen Reduction Reaction

A highly active iron–nitrogen‐doped carbon nanotube catalyst for the oxygen reduction reaction (ORR) is produced by employing vertically aligned carbon nanotubes (VA‐CNT) with a high specific surface area and iron(II) phthalocyanine (FePc) molecules. Pyrolyzing the composite easily transforms the adsorbed FePc molecules into a large number of iron coordinated nitrogen functionalized nanographene (Fe–N–C) structures, which serve as ORR active sites on the individual VA‐CNT surfaces. The catalyst exhibits a high ORR activity, with onset and half‐wave potentials of 0.97 and 0.79 V, respectively, versus reversible hydrogen electrode, a high selectivity of above 3.92 electron transfer number, and a high electrochemical durability, with a 17 mV negative shift of E _1/2 after 10 000 cycles in an oxygen‐saturated 0.5 m H₂SO₄ solution. The catalyst demonstrates one of the highest ORR performances in previously reported any‐nanotube‐based catalysts in acid media. The excellent ORR performance can be attributed to the formation of a greater number of catalytically active Fe–N–C centers and their dense immobilization on individual tubes, in addition to more efficient mass transport due to the mesoporous nature of the VA‐CNTs.     

The Quasi‐Pt‐Allotrope Catalyst: Hollow PtCo@single‐Atom Pt1 on Nitrogen‐Doped Carbon toward Superior Oxygen Reduction

Single‐atom Pt and bimetallic Pt₃Co are considered the most promising oxygen reduction reaction (ORR) catalysts, with a much lower price than pure Pt. The combination of single‐atom Pt and bimetallic Pt₃Co in a highly active nanomaterial, however, is challenging and vulnerable to agglomeration under realistic reaction conditions, leading to a rapid fall in the ORR. Here, a sustainable quasi‐Pt‐allotrope catalyst, composed of hollow Pt₃Co (H‐PtCo) alloy cores and N‐doped carbon anchoring single atom Pt shells (Pt₁N‐C), is constructed. This unique nanoarchitecture enables the inner and exterior spaces to be easily accessible, exposing an extra‐high active surface area and active sites for the penetration of both aqueous and organic electrolytes. Moreover, the novel Pt₁N‐C shells not only effectively protect the H‐PtCo cores from agglomeration but also increase the efficiency of the ORR in virtue of the isolated Pt atoms. Thus, the H‐PtCo@Pt₁N‐C catalyst exhibits stable ORR without any fade over a prolonged 10 000 cycle test at 0.9 V in HClO₄ solution. Furthermore, this material can offer efficient and stable ORR activities in various organic electrolytes, indicating its great potential for next‐generation lithium–air batteries as well.     

Fe3C‐Co Nanoparticles Encapsulated in a Hierarchical Structure of N‐Doped Carbon as a Multifunctional Electrocatalyst for ORR,OER, and HER

Rational design of non‐noble metal catalysts with robust and durable electrocatalytic activity for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) is extremely important for renewable energy conversion and storage, regenerative fuel cells, rechargeable metal–air batteries, water splitting etc. In this work, a unique hybrid material consisting of Fe₃C and Co nanoparticles encapsulated in a nanoporous hierarchical structure of N‐doped carbon (Fe₃C‐Co/NC) is fabricated for the first time via a facile template‐removal method. Such an ingenious structure shows great features: the marriage of 1D carbon nanotubes and 2D carbon nanosheets, abundant active sites resulting from various active species of Fe₃C, Co, and NC, mesoporous carbon structure, and intimate integration among Fe₃C, Co, and NC. As a multifunctional electrocatalyst, the Fe₃C‐Co/NC hybrid exhibits excellent performance for ORR, OER, and HER, outperforming most of reported triple functional electrocatalysts. This study provides a new perspective to construct multifunctional catalysts with well‐designed structure and superior performance for clean energy conversion technologies.     

MO‐Co@N‐Doped Carbon (M = Zn or Co): Vital Roles of Inactive Zn and Highly Efficient Activity toward Oxygen Reduction/Evolution Reactions for Rechargeable Zn–Air Battery

A highly efficient bifunctional oxygen catalyst is required for practical applications of fuel cells and metal–air batteries, as oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are their core electrode reactions. Here, the MO‐Co@N‐doped carbon (NC, M = Zn or Co) is developed as a highly active ORR/OER bifunctional catalyst via pyrolysis of a bimetal metal–organic framework containing Zn and Co, i.e., precursor (CoZn). The vital roles of inactive Zn in developing highly active bifunctional oxygen catalysts are unraveled. When the precursors include Zn, the surface contents of pyridinic N for ORR and the surface contents of Co–N_x and Co³⁺/Co²⁺ ratios for OER are enhanced, while the high specific surface areas, high porosity, and high electrochemical active surface areas are also achieved. Furthermore, the synergistic effects between Zn‐based and Co‐based species can promote the well growth of multiwalled carbon nanotubes (MWCNTs) at high pyrolysis temperatures (≥700 °C), which is favorable for charge transfer. The optimized CoZn‐NC‐700 shows the highly bifunctional ORR/OER activity and the excellent durability during the ORR/OER processes, even better than 20 wt% Pt/C (for ORR) and IrO₂ (for OER). CoZn‐NC‐700 also exhibits the prominent Zn–air battery performance and even outperforms the mixture of 20 wt% Pt/C and IrO₂.     

Pyridinic‐Nitrogen‐Dominated Graphene Aerogels with Fe–N–C Coordination for Highly Efficient Oxygen Reduction Reaction

Here, pyridinic nitrogen dominated graphene aerogels with/without iron incorporation (Fe‐NG and NG) are prepared via a facile and effective process including freeze‐drying of chemically reduced graphene oxide with/without iron precursor and thermal treatment in NH₃. A high doping level of nitrogen has been achieved (up to 12.2 at% for NG and 11.3 at% for Fe‐NG) with striking enrichment of pyridinic nitrogen (up to 90.4% of the total nitrogen content for NG, and 82.4% for Fe‐NG). It is found that the Fe‐NG catalysts display a more positive onset potential, higher current density, and better four‐electron selectivity for ORR than their counterpart without iron incorporation. The most active Fe‐NG exhibits outstanding ORR catalytic activity, high durability, and methanol tolerance ability that are comparable to or even superior to those of the commercial Pt/C catalyst at the same catalyst loading in alkaline environment. The excellent ORR performance can be ascribed to the synergistic effect of pyridinic N and Fe‐N _x sites (where iron probably coordinates with pyridinic N) that serve as active centers for ORR. Our Fe‐NG can be developed into cost‐effective and durable catalysts as viable replacements of the expensive Pt‐based catalysts in practical fuel cell applications.     

Fe,Cu‐Coordinated ZIF‐Derived Carbon Framework for Efficient Oxygen Reduction Reaction and Zinc–Air Batteries

Zeolitic imidazole frameworks (ZIFs) offer rich platforms for rational design and construction of high‐performance nonprecious‐metal oxygen reduction reaction (ORR) catalysts owing to their flexibility, hierarchical porous structures, and high surface area. Herein, an Fe, Cu‐coordinated ZIF‐derived carbon framework (Cu@Fe‐N‐C) with a well‐defined morphology of truncated rhombic dodecahedron is facilely prepared by introducing Fe²⁺ and Cu²⁺ during the growth of ZIF‐8, followed by pyrolysis. The obtained Cu@Fe‐N‐C, with bimetallic active sites, large surface area, high nitrogen doping level, and conductive carbon frameworks, exhibits excellent ORR performance. It displays 50 mV higher half‐wave potential (0.892 V) than that of Pt catalysts in an alkaline medium and comparable performance to Pt catalysts in an acidic medium. In addition, it also has excellent durability and methanol resistance ability in both acidic and alkaline solutions, which makes it one of the best Pt‐free catalysts reported to date for ORR. Impressively, when being employed as a cathode catalyst in zinc–air batteries, Cu@Fe‐N‐C presents a higher peak power density of 92 mW cm^?2 than that of Pt/C (74 mW cm^?2) as well as excellent durability.     

Hollow Loofah‐Like N,O‐Co‐Doped Carbon Tube for Electrocatalysis of Oxygen Reduction

Designing a highly active doped‐carbon‐based oxygen reduction reaction (ORR) electrocatalyst with optimal stability is a must if large‐scale implementations of fuel cells are to be realized. Developing controllable doping strategies is essential for achieving highly active catalysts. Herein, a facile doping strategy is developed by designing a precursor material with unique core–shell nanostructure, whereby the Materials Institute Lavoisier (MIL) metal–organic framework (MOF) and polyaniline are core and shell components, and serving as oxygen and nitrogen precursors, respectively. A novel hollow loofah‐like carbon tube (HLCT) catalyst is derived from precursor material with controllable heteroatom‐doping concentrations through modulating the mass ratio of MOF/aniline. The optimal HLCT‐1/2 catalyst, with a MOF/aniline mass ratio of 1/2, exhibits excellent ORR activity and stability in an alkaline medium. Remarkably, the half‐wave potential (0.88 V) and the current density (4.35 mA cm^?2) at 0.85 V of HLCT‐1/2 catalyst surpass that of commercial Pt/C. Such superior catalytic properties can be attributed to the high specific surface area and abundant active sites of loofah‐shape carbon tubes. Moreover, the O dopant modulates the content and distribution of N species, leading to the enhanced adsorption strength of oxygen molecules on catalyst surface, promoting the activation of oxygen, and thus achieving higher electrocatalytic activity.     

Phosphate‐Mediated Immobilization of High‐Performance AuPd Nanoparticles for Dehydrogenation of Formic Acid at Room Temperature

Dehydrogenation of formic acid (FA) is a promising alternative to fossil fuels, to provide clean energy for the future energy economy. The synthesis of highly active catalysts for FA dehydrogenation at room temperature has attracted a lot of attention. Herein, for the first time, highly active aurum–palladium nanoparticles (AuPd NPs) immobilized on nitrogen (N)‐doped porous carbon are fabricated through a phosphate‐mediation approach. The N‐doped carbon anchored with phosphate, which can be removed in alkaline solution during the reduction process of metal ions, shows an enhanced performance of absorbing and dispersion of both Au and Pd ions, which is a key to the synthesis of highly dispersed ultrafine AuPd NPs. The as‐prepared catalyst (designated as Au₂Pd₃@(P)N‐C) exhibits an extraordinarily high turnover frequency of 5400 h^?1 and a 100% H₂ selectivity for FA dehydrogenation at 30 °C. This phosphate‐mediation approach provides a new way to fabricate highly active metal NPs for catalytic application, pushing heterogeneous catalysts forward for practical usage in energy storage and conversion.     

An Advanced Nitrogen‐Doped Graphene/Cobalt‐Embedded Porous Carbon Polyhedron Hybrid for Efficient Catalysis of Oxygen Reduction and Water Splitting

A novel hybrid electrocatalyst consisting of nitrogen‐doped graphene/cobalt‐embedded porous carbon polyhedron (N/Co‐doped PCP//NRGO) is prepared through simple pyrolysis of graphene oxide‐supported cobalt‐based zeolitic imidazolate‐frameworks. Remarkable features of the porous carbon structure, N/Co‐doping effect, introduction of NRGO, and good contact between N/Co‐doped PCP and NRGO result in a high catalytic efficiency. The hybrid shows excellent electrocatalytic activities and kinetics for oxygen reduction reaction in basic media, which compares favorably with those of the Pt/C catalyst, together with superior durability, a four‐electron pathway, and excellent methanol tolerance. The hybrid also exhibits superior performance for hydrogen evolution reaction, offering a low onset overpotential of 58 mV and a stable current density of 10 mA cm^?2 at 229 mV in acid media, as well as good catalytic performance for oxygen evolution reaction (a small overpotential of 1.66 V for 10 mA cm^?2 current density). The dual‐active‐site mechanism originating from synergic effects between N/Co‐doped PCP and NRGO is responsible for the excellent performance of the hybrid. This development offers an attractive catalyst material for large‐scale fuel cells and water splitting technologies.     

Recent Progress in MOF‐Derived,Heteroatom‐Doped Porous Carbons as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction in Fuel Cells

Currently, developing nonprecious‐metal catalysts to replace Pt‐based electrocatalysts in fuel cells has become a hot topic because the oxygen reduction reaction (ORR) in fuel cells often requires platinum, a precious metal, as a catalyst, which is one of the major hurdles for commercialization of the fuel cells. Recently, the newly emerging metal‐organic frameworks (MOFs) have been widely used as self‐sacrificed precursors/templates to fabricate heteroatom‐doped porous carbons. Here, the recent progress of MOF‐derived, heteroatom‐doped porous carbon catalysts for ORR in fuel cells is systematically reviewed, and the synthesis strategies for using different MOF precursors to prepare heteroatom‐doped porous carbon catalysts, including the direct carbonization of MOFs, MOF and heteroatom source mixture carbonization, and MOF‐based composite carbonization are summarized. The emphasis is placed on the precursor design of MOF‐derived metal‐free catalysts and transition‐metal‐doped carbon catalysts because the MOF precursors often determine the microstructures of the derived porous carbon catalysts. The discussion provides a useful strategy for in situ synthesis of heteroatom‐doped carbon ORR electrocatalysts by rationally designing MOF precursors. Due to the versatility of MOF structures, MOF‐derived porous carbons not only provide chances to develop highly efficient ORR electrocatalysts, but also broaden the family of nanoporous carbons for applications in supercapacitors and batteries.     

2D Dual‐Metal Zeolitic‐Imidazolate‐Framework‐(ZIF)‐Derived Bifunctional Air Electrodes with Ultrahigh Electrochemical Properties for Rechargeable Zinc–Air Batteries

Here first a 2D dual‐metal (Co/Zn) and leaf‐like zeolitic imidazolate framework (ZIF‐L)‐pyrolysis approach is reported for the low‐cost and facile preparation of Co nanoparticles encapsulated into nitrogen‐doped carbon nanotubes (Co‐N‐CNTs). Importantly, the reasonable Co/Zn molar ratio in the ZIF‐L is the key to the emergence of the encapsulated microstructure. Specifically, high‐dispersed cobalt nanoparticles are fully encapsulated in the tips of N‐CNTs, leading to the full formation of highly active Co–N–C moieties for oxygen reduction and evolution reactions (ORR and OER). As a result, the obtained Co‐N‐CNTs present superior electrocatalytic activity and stability toward ORR and OER over the commercial Pt/C and IrO₂ as well as most reported metal‐organic‐framework‐derived catalysts, respectively. Remarkably, as bifunctional air electrodes of the Zn–air battery, it also shows extraordinary charge–discharge performance. The present concept will provide a guideline for screening novel 2D metal‐organic frameworks as precursors to synthesize advanced multifunctional nanomaterials for cross‐cutting applications.     

Pyrolyzed Cobalt Corrole as a Potential Non‐Precious Catalyst for Fuel Cells

Non‐precious metal catalysts of the oxygen reduction reaction are highly favored for use in polymer electrolyte fuel cells (PEFC) because of their relatively low cost. Here, a new carbon‐black‐supported pyrolyzed Co‐corrole (py‐Co‐corrole/C) catalyst of the oxygen reduction reaction (ORR) in a PEFC cathode is demonstrated to have high catalytic performance. The py‐Co‐corrole/C at 700 °C exhibits optimized ORR activity and participates in a direct four‐electron reduction pathway for the reduction of O₂ to H₂O. The H₂‐O₂ PEFC test of py‐Co‐corrole/C in the cathode reveals a maximum power density of 275 mW cm^?2, which yields a higher performance and a lower Co loading than previous studies of Co‐based catalysts for PEFCs. The enhancement of the ORR activity of py‐Co‐corrole/C is attributable to the four‐coordinated Co‐corrole structure and the oxidation state of the central cobalt.     

Few Layered N,P Dual‐Doped Carbon‐Encapsulated Ultrafine MoP Nanocrystal/MoP Cluster Hybrids on Carbon Cloth: An Ultrahigh Active and Durable 3D Self‐Supported Integrated Electrode for Hydrogen Evolution Reaction in a Wide pH Range

Development of highly active and stable electrocatalysts is a key to realize efficient hydrogen evolution through water electrolysis. Here, the development of a 3D self‐supported integrated electrode constituting few layered N, P dual‐doped carbon‐encapsulated ultrafine MoP nanocrystal/MoP cluster hybrids on carbon cloth (FLNPC@MoP‐NC/MoP‐C/CC) is demonstrated. Benefiting from novel structural features including fully open and accessible nanoporosity, ultrasmall size of MoP‐NCs on MoP‐Cs as well as strong synergistic effects of N, P dual‐doped carbon layers with MoP‐NCs, the FLNPC@MoP‐NC/MoP‐C/CC as a 3D self‐supported binder‐free integrated electrode exhibits extraordinary catalytic activity for the hydrogen evolution reaction (HER) with extremely low overpotentials at all pH values ( j = 10 mA cm^?2 at η = 74, 106, and 69 mV in 0.5 m H₂SO₄, 1.0 m PBS, and 1.0 m KOH electrolytes, respectively). To the best of our knowledge, the ultrahigh electrocatalytic performance represents one of the best MoP‐based HER electrocatalysts reported so far. Additionally, few layered N, P dual‐doped carbon can effectively prevent MoP‐NC/MoP‐C from corrosion, making the FLNPC@MoP‐NC/MoP‐C/CC exhibit nearly unfading stability after 50 h testing in acidic, neutral, and alkaline media, which shows great promise for electrocatalytic water splitting application.     

Hybridization of Bimetallic Molybdenum‐Tungsten Carbide with Nitrogen‐Doped Carbon: A Rational Design of Super Active Porous Composite Nanowires with Tailored Electronic Structure for Boosting Hydrogen Evolution Catalysis

An ecofriendly and robust strategy is developed to construct a self‐supported monolithic electrode composed of N‐doped carbon hybridized with bimetallic molybdenum‐tungsten carbide (Mo_xW_2?xC) to form composite nanowires for hydrogen evolution reaction (HER). The hybridization of Mo_xW_2?xC with N‐doped carbon enables effective regulation of the electrocatalytic performance of the composite nanowires, endowing abundant accessible active sites derived from N‐doping and Mo_xW_2?xC incorporation, outstanding conductivity resulting from the N‐doped carbon matrix, and appropriate positioning of the d‐band center with a thermodynamically favorable hydrogen adsorption free energy (ΔG_H*) for efficient hydrogen evolution catalysis, which forms a binder‐free 3D self‐supported monolithic electrode with accessible nanopores, desirable chemical compositions and stable composite structure. By modulating the Mo/W ratio, the optimal Mo_1.33W_0.67C @ NC nanowires on carbon cloth achieve a low overpotential (at a geometric current density of 10 mA cm^?2) of 115 and 108 mV and a small Tafel slope of 58.5 and 55.4 mV dec^?1 in acidic and alkaline environments, respectively, which can maintain 40 h of stable performance, outperforming most of the reported metal‐carbide‐based HER electrocatalysts.     

Hybrid of Iron Nitride and Nitrogen‐Doped Graphene Aerogel as Synergistic Catalyst for Oxygen Reduction Reaction

It is extremely desirable but challenging to create highly active, stable, and low‐cost catalysts towards oxygen reduction reaction to replace Pt‐based catalysts in order to perform the commercialization of fuel cells. Here, a novel iron nitride/nitrogen doped‐graphene aerogel hybrid, synthesized by a facile two‐step hydrothermal process, in which iron phthalocyanine is uniformly dispersed and anchored on graphene surface with the assist of π–π stacking and oxygen‐containing functional groups, is reported. As a result, there exist strong interactions between Fe _x N nanoparticles and graphene substrates, leading to a synergistic effect towards oxygen reduction reaction. It is worth noting that the onset potential and current density of the hybrid are significantly better and the charge transfer resistance is much lower than that of pure nitrogen‐doped graphene aerogel, free Fe _x N and their physical mixtures. The hybrid also exhibits comparable catalytic activity as commercial Pt/C at the same catalyst loading, while its stability and resistance to methanol crossover are superior. Interestingly, it is found that, apart from the active nature of the hybrid, the large surface area and porosity are responsible for its excellent onset potential and the high density of Fe–N–C sties and small size of Fe _x N particles boost charge transfer rate.     

Scale‐Up Biomass Pathway to Cobalt Single‐Site Catalysts Anchored on N‐Doped Porous Carbon Nanobelt with Ultrahigh Surface Area

Porous Co? N? C catalysts with ultrahigh surface area are highly required for catalytic reactions. Here, a scale‐up method to synthesize gram‐quantities of isolated Co single‐site catalysts anchored on N‐doped porous carbon nanobelt (Co‐ISA/CNB) by pyrolysis of biomass‐derived chitosan is reported. The usage of ZnCl₂ and CoCl₂ salts as effective activation–graphitization agents can introduce a porous belt‐like nanostructure with ultrahigh specific surface area (2513 m² g^?1) and high graphitization degree. Spherical aberration correction electron microscopy and X‐ray absorption fine structure analysis reveal that Co species are present as isolated single sites and stabilized by nitrogen in CoN₄ structure. All these characters make Co‐ISA/CNB an efficient catalyst for selective oxidation of aromatic alkanes at room temperature. For oxidation of ethylbenzene, the Co‐ISA/CNB catalysts yield a conversion up to 98% with 99% selectivity, while Co nanoparticles are inert. Density functional theory calculations reveal that the generated Co?O centers on isolated Co single sites are responsible for the excellent catalytic efficiency.     

CuCo Bimetallic Oxide Quantum Dot Decorated Nitrogen‐Doped Carbon Nanotubes: A High‐Efficiency Bifunctional Oxygen Electrode for Zn–Air Batteries

The large‐scale production of metal–air batteries, an appealing solution for next‐generation energy storage, requires low‐cost, earth‐abundant, and efficient oxygen electrode materials, yet insights into active catalyst structures and synergistic reactivity remain largely unknown. Here, a new bifunctional oxygen electrode based on nitrogen‐doped carbon nanotubes decorated by spinel CuCo₂O₄ quantum dots (CuCo₂O₄/N‐CNTs) is reported, outperforming the benchmark of state‐of‐the‐art noble metal catalysts. Combining spectroscopic characterization and electrochemical studies, a prominent synergetic effect between CuCo₂O₄ and N‐doped carbon nanotubes is uncovered: the high conductivity, large active surface area, and increase in the number of catalytic sites induced by Cu doping (i.e., Cu²⁺ and Cu?N) can be beneficial to the overall electrocatalytic activities. Remarkably, the native flexibility of CuCo₂O₄/N‐CNTs allows its direct use as reversible oxygen electrodes in Zn–air batteries either with liquid alkaline electrolyte or in the all‐solid‐state configuration. The prepared devices demonstrate excellent discharging/charging performance, large energy density (83.83 mW cm^?2 in liquid state, 1.86 W g^?1 in all‐solid‐state), and long lifetime (48 h in liquid state, 9 h in all‐solid‐state), holding great promise in the practical application of rechargeable metal–air batteries and other fuel cells.