Controllable radical copolymerization of styrene and methyl methacrylate using 1,1,2,2‐tetraphenyl‐1,2‐bis(trimethylsilyloxy) ethane as initiator

Copolymerization of styrene (St) and methyl methacrylate (MMA) was carried out using 1,1,2,2‐tetraphenyl‐1,2‐bis (trimethylsilyloxy) ethane (TPSE) as initiator; the copolymerization proceeded via a “living” radical mechanism and the polymer molecular weight (M_w) increased with the conversion and polymerization time. The reactivity ratios for TPSE and azobisisobutyronitrile (AIBN) systems calculated by Finemann–Ross method were r_St = 0.216 ± 0.003, r_MMA= 0.403 ± 0.01 for the former and r_St= 0.52 ± 0.01, r_MMA= 0.46 ± 0.01 for the latter, respectively, and the difference between them and the effect of polymerization conditions on copolymerization are discussed. Thermal analysis proved that the copolymers obtained by TPSE system showed higher sequence regularity than that obtained by the AIBN system, and the sequence regularity increased with the content of styrene in copolymer chain segment. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1474–1482, 2001     

Synthesis,characterization and thermal degradation of dual temperature‐ and pH‐sensitive RAFT‐made copolymers of N,N‐(dimethylamino)ethyl methacrylate and methyl methacrylate

Poly{[(N,N‐(dimethylamino)ethyl methacrylate]‐co‐(methyl methacrylate)} copolymers of various compositions were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization at 70 °C in N,N‐dimethylformamide. The polymer molecular weights and molecular weight distributions were obtained from size exclusion chromatography, and they indicated the controlled nature of the RAFT polymerizations; the polydispersity indices are in the range 1.1–1.3. The reactivity ratios of N,N‐(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) (r_DMAEMA = 0.925 and r_MMA = 0.854) were computed by the extended Kelen–Tüdös method at high conversions, using compositions obtained from ¹H NMR. The pH‐ and temperature‐sensitive behaviour were studied in aqueous solution to confirm dual responsiveness of these copolymers. The thermal properties of the copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The kinetics of thermal degradation were determined by Friedmann and Chang techniques to evaluate various parameters such as the activation energy, the order and the frequency factor. © 2012 Society of Chemical Industry     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Synthesis,characterization, reactivity ratios by nuclear magnetic resonance spectroscopy,and application of (2,5‐Dichlorophenyl acrylate‐co‐glycidyl methacrylate) polymers as adhesives for the leather industry

2,5‐ Dichlorophenyl acrylate (DPA)‐co‐glycidyl methacrylate (GMA) polymers having five different compositions were synthesized in 1,4‐dioxane using benzoyl peroxide as a free‐radical initiator at 70 ± 0.5°C. Using ¹H‐NMR spectroscopy, the composition of the two monomers in the copolymers was calculated by comparing the integral values of the aromatic and aliphatic proton peaks. The reactivity ratios were calculated by Fineman–Ross (r₁ = 0.31 and r₂ = 1.08), Kelen–Tudos (r₁ = 0.40 and r₂ = 1.15), and extended Kelen–Tudos (r₁ = 0.39 and r₂ = 1.16) methods. The nonlinear error‐in‐variables model was used to compare the reactivity ratios. The copolymers were characterized by ¹H and proton decoupled ¹³C‐NMR spectroscopes. Gel permeation chromatography was performed for estimating the M_w and M_n and M_w/M_n of the poly(DPA) and copolymers (DPA‐co‐GMA: 09 : 91 and 50 : 50). Thermal stability of the homo‐ and copolymers was estimated using TGA [poly(DPA) > DPA‐co‐GMA (50 : 50) > DPA‐co‐GMA (09:91)], while DSC was utilized for determining the glass transition temperature. T_g increased with increased DPA content in the copolymer. The 50 : 50 mol % copolymer was chosen for curing with diethanolamine in chloroform. The cured resins were tested for the adhesive properties on leather at different temperatures (50, 90, 100, and 110°C). The resin cured at 50 °C exhibited a maximum peel strength of 1.6 N/mm, revealing a good adhesive behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1167–1174, 2006     

Stereochemical and compositional assignments of trans‐4‐methacryloyloxyazobenzene–methyl methacrylate copolymers by one‐ and two‐dimensional NMR spectroscopy

The microstructure of trans‐4‐methacryloyloxyazobenzene–methyl methacrylate copolymers prepared by solution polymerization process using AIBN as initiator is analyzed by one‐and two‐dimensional spectroscopy. Sequence distribution was calculated from the ¹³C(¹H)‐NMR spectra of the copolymers. Comonomer reactivity ratios were determined using the Kelen–Tudos and the nonlinear error‐in‐variables methods are r_A = 1.14 ± 0.08 and r_M = 0.51 ± 0.03; r_A = 1.13 ± 0.1 and r_M = 0.50 ± 0.04, respectively. The sequence distribution of A‐ and M‐centered triads determined from ¹³C(¹H)‐NMR spectra of copolymer is in good agreement with triad concentration calculated from a statistical model. The 2‐D heteronuclear single‐quantum correlation and correlated spectroscopy (TOCSY) was used to analyze the complex ¹H‐NMR spectrum. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3016–3025, 1999     

Copolymerization of N‐aryl substituted itaconimide with methyl methacrylate: Effect of substituents on monomer reactivity ratio and thermal behavior

The article describes the synthesis and characterization of N‐(4‐methoxy‐3‐chlorophenyl) itaconimide (MCPI) and N‐(2‐methoxy‐5‐chlorophenyl) itaconimide (OMCPI) obtained by reacting itaconic anhydride with 4‐methoxy‐3‐chloroanisidine and 2‐methoxy‐5‐chloroanisidine, respectively. Structural and thermal characterization of MCPI and OMCPI monomers was done by using ¹H NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of MCPI or OMCPI with methyl methacrylate (MMA) in solution was carried out at 60°C using AIBN as an initiator and THF as solvent. Feed compositions having varying mole fractions of MCPI and OMCPI ranging from 0.1 to 0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by FTIR, ¹H NMR, and elemental analysis and percent nitrogen content was used to calculate the copolymer composition. The monomer reactivity ratios for MMA–MCPI copolymers were found to be r₁ (MMA) = 0.32 ± 0.03 and r₂ (MCPI) = 1.54 ± 0.05 and that for MMA–OMCPI copolymers were r₁ (MMA) = 0.15 ± 0.02 and r₂ (OMCPI) = 1.23 ± 0.18. The intrinsic viscosity [η] of the copolymers decreased with increasing mole fraction of MCPI/or OMCPI. The glass transition temperature as determined from DSC scans was found to increase with increasing amounts of OMPCI in copolymers. A significant improvement in the char yield as determined by thermogravimetry was observed upon copolymerization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2391–2398, 2006     

Photografting of N‐isopropylacrylamide and glycidyl methacrylate binary monomers on polyethylene film: Effect of mixed solvent consisting of water and organic solvent

Photografting (λ > 300 nm) of N‐isopropylacrylamide (NIPAAm) and glycidyl methacrylate (GMA) binary monomers (NIPAAm/GMA) on low‐density polyethylene film (thickness = 30 μm) was investigated at 60°C using mixed solvent consisting of water and an organic solvent such as acetone. Xanthone was used as a photoinitiator by coating it on the film surfaces. A maximum percentage of grafting was observed at a certain concentration of acetone in the mixed solvent, which was commonly observed for both ratios of NIPAAm/GMA, 8/2 and 7/3. Based on the photografting of NIPAAm/GMA on xanthone‐coated film, monomer reactivity ratios of NIPAAm (r₁) and GMA (r₂) were calculated using the Fineman–Ross method. The values were 0.31 ± 0.1 and 4.8 ± 0.2 for the water solvent system, while they were 0.96 ± 0.1 and 4.9 ± 0.1 for the mixed solvent system. NIPAAm/GMA‐grafted films with a homogeneous distribution of grafted chains were formed by photografting using water and mixed solvents. The NIPAAm/GMA‐grafted films exhibited temperature‐responsive characters, whereas the grafted films showed a reversible change in the degree of swelling between 0 and 50°C, respectively. Epoxy groups in the grafted poly(NIPAAm/GMA) chains could be aminated with ethylenediamine in N,N′‐dimethylformamide at 70°C for 3 h. Complexes of the aminated NIPAAm/GMA‐grafted chains with cupric ion exhibited catalytic activity for the decomposition of hydrogen peroxide at 20 to 50°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2469–2475, 2005     

Copolymerization of 4-biphenyl methacrylate with glycidyl methacrylate: Synthesis, Characterization, thermal properties and determination of monomer reactivity ratios

Summary The methacrylic monomer, 4-biphenylmethacrylate (BPM) was synthesized by reacting 4-biphenyl phenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in presence of triethylamine as a catalyst. The copolymers of BPM with glycidyl methacrylate (GMA) were synthesized by free radical polymerization in EMK solution at 70±1 °C using benzoyl peroxide as a free radical initiator. The copolymerization behaviour was studied in a wide composition interval with the mole fractions of BPM ranging from 0.15 to 0.9 in the feed. The copolymers were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The solubility was tested in various polar and non polar solvents. The molecular weight and polydispersity indices of the polymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in BPM content. The thermogravimetric analysis of the polymers showed that the thermal stability of the copolymer increases with BPM content. The copolymer composition was determined using ¹H-NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such as Fineman-Ross (r₁=0.392 ± 0.006, r₂ = 0.358 ± 0.007, Kelen-Tudos (r₁= 0.398 ± 0.004, r₂= 0.365 ± 0.013) and extended Kelen-Tudos methods (r₁= 0.394 ± 0.004, r₂= 0.352 ± 0.006).     

Preparation and characterization of copolymers containing (+)‐bornyl methacrylate and their racemate for positive‐tone photoresist

This study investigated the chemical behavior of polymers bearing cycloaliphatic bornyl units along with the steric difference of the chiral (+)‐bornyl methacrylate [(+)‐BMA] and racemic (±)‐BMA, expressed in the physical properties of the copolymers and the resist characteristics. To do this, a series of copolymers containing (+)‐bornyl methacrylate [(+)‐BMA] and (±)‐BMA] units was synthesized. Comonomers of tert‐butyl methacrylate (TBMA), methyl methacrylate (MMA), and maleic anhydride (MA) were used. The thermogravimetric curves, glass‐transition temperature (T_g), and molecular weight (MW) of the copolymers were evaluated. Exposure characteristics of chemical‐amplified positive photoresists comprising various copolymers were investigated. It was found that copolymers bearing (±)‐BMA have higher T_g and better thermostability than those of copolymers containing (+)‐BMA units. The copolymers with (±)‐BMA units, however, revealed an inert photochemical behavior on the positive‐tone photoresist. The patterning properties of the positive photoresist, composed of copolymers bearing (+)‐BMA and (±)‐BMA, and the photoacid generator (PAG) were also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3538–3544, 2001     

Functional copolymers of p‐cumyl phenyl methacrylate and glycidyl methacrylate: Synthesis,characterization, and reactivity ratios

Free‐radical polymerization of p‐cumyl phenyl methacrylate (CPMA) was performed in benzene using bezoyl peroxide as an initiator at 80°C. The effect of time on the molecular weight was studied. Functional copolymers of CPMA and glycidyl methacrylate (GMA) with different feed ratios were synthesized by free‐radical polymerization in methyl ethyl ketone at 70°C, and they were characterized by FTIR and ¹H‐NMR spectroscopy. The molecular weights and polydispersity indexes of the polymers and copolymers were determined by gel permeation chromatography. The copolymer composition was determined by ¹H‐NMR. The glass‐transition temperature of the polymer and the copolymers was determined by differential scanning calorimetry. The reactivity ratios of the monomers were determined by the Fineman–Ross and Kelen–Tudos methods. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 336–347, 2005     

Photoinitiated graft copolymerization of glycidyl methacrylate and 2-hydroxyethyl methacrylate onto polyacrylonitrile and application of the synthesized graft copolymers in penicillin–amidase immobilization

The photoinitiated graft copolymerization of hydroxyethyl methacrylate and/or glycidyl methacrylate onto polyacrylonitrile (PAN) and the applicability of the matrices synthesized in this way for penicillin–amidase immobilization are discussed. The copolymers are prepared by putting irradiated PAN fibers with preliminary adsorbed benzophenone on them into the polymerization feed that includes hydroxyethyl methacrylate and/or glycidyl methacrylate dissolved in a water–methyl ethyl ketone mixture. The degree of grafting varies between 11.7 and 46.0%, and its efficiency, between 27.8 and 78.9%. The concentration of epoxy groups in the synthesized copolymers is in the range between 210 and 2220 μmol/g. The reactivity ratios of the two comonomers are determined to be r_GM = 0.70 ± 0.15 and r_HEMA = 2.73 ± 0.14. The grafted copolymers containing HEMA units provide milder conditions for penicillin–amidase covalent binding. The optimum pH and temperature values of penicillin–amidase immobilized on these matrices are 7.5 and 45°C, respectively. © 1994 John Wiley & Sons, Inc.     

Bulk and solution copolymerization of methyl methacrylate and vinyl acetate

A series of batch, bulk and solution (in toluene) copolymerizations of methyl methacrylate and vinyl acetate was performed under various reaction conditions to high monomer conversions. In addition, low conversion bulk experiments were performed to estimate monomer reactivity ratios using the error in variables model method, based on terminal model (Mayo–Lewis) kinetics. A combination of the low and high conversion data with data from a previous study yielded reactivity ratio (r) estimates of 27.465 and 0.0102 for r_MMA and r_VAc, respectively, using the integrated copolymer composition (Meyer–Lowry) equation. In the high conversion experiments the effects of various factors on the reaction rate, cumulative copolymer composition, number‐ and weight‐average molecular weights, and molecular weight distribution were studied. The factors included the monomer feed composition, initiator concentration, temperature, solvent concentration, and the addition of n‐dodecyl mercaptan chain transfer agent. These factors were examined in light of the wide difference in the monomer reactivity ratios. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1238–1255, 2001     

Kinetics for copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

The kinetics for the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) was investigated. The initial copolymerization rate R_p is proportional to the initiator concentration to the power of 0.54. The apparent activation energy of the overall copolymerization was measured to be 69.0 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.42 and r_MMA = 1.63. R_p reduces slightly, and the molecular weight of the resultant copolymer decreases with increasing the concentration of the chain transfer agent N‐dodecanethiol (RSH). The more the transfer agent, the narrower the molecular weight distribution of the resulting copolymer. The following chain‐transfer constant of RSH for the copolymerization of MMA with NCMI in benzene at 50°C was obtained: C_s = 0.23. The glass transition temperature (T_g) of the copolymer increases with increasing f_NCMI, which indicates that adding NCMI can improve the heat resistance of Plexiglas. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1293–1297, 1999     

Synthesis and characterization of perfluorinated acrylate–methyl methacrylate copolymers

A novel perfluorinated acrylic monomer 3,5‐bis(perfluorobenzyloxy)benzyl acrylate (FM) with perfluorinated aromatic units was synthesized with 3,5‐bis(perfluorobenzyl)oxybenzyl alcohol, acryloyl chloride, and triethylamine. Copolymers of FM monomer with methyl methacrylate (MMA) were prepared via free‐radical polymerization at 80°C in toluene with 2,2′‐azobisisobutyronitrile as the initiator. The obtained copolymers were characterized by ¹H‐NMR and gel permeation chromatography. The monomer reactivity ratios for the monomer pair were calculated with the extended Kelen–Tüdos method. The reactivity ratios were found to be r₁ = 0.38 for FM, r₂ = 1.11 for MMA, and r₁r₂ < 1 for the pair FM–MMA. This shows that the system proceeded as random copolymerization. The thermal behavior of the copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). The copolymers had only one glass‐transition temperature, which changed from 46 to 78°C depending on the copolymer composition. Melting endotherms were not observed in the DSC traces; this indicated that all of the copolymers were completely amorphous. Copolymer films were prepared by spin coating, and contact angle measurements of water and ethylene glycol on the films indicated a high degree of hydrophobicity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of two‐end‐functionalized copolymer of styrene and methyl methacrylate via living radical polymerization

The random copolymers (HO‐P(St‐r‐MMA)‐COOH) of styrene (St) and methyl methacrylate (MMA) with hydroxyl group at one end and carboxyl group at another end were synthesized by nitroxide‐mediated living radical polymerization initiated by 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) and 4‐hydroxyl‐2,2,6,6–tetramethylpiperidineoxyl (TEMPO‐OH). The experimental results have shown that all synthesized copolymers have narrow molecular weight distribution. The conversion of monomers and the molecular weight of copolymer increase with polymerization time. Thus, a copolymerization mechanism containing living radical polymerization is suggested. The use of this method permits the copolymer with two functional chain ends and controllable molecular weight as well as low molecular weight distribution. X‐ray photoelectron spectroscopy result shows that the synthesized copolymers can be tethered on the surface of silicon wafer through the reaction between the hydroxyl end of the copolymer and native oxide layer on the wafer. In addition, an organic/inorganic hybrid surface has achieved by treating copolymer tethered Si‐substrates with SiCl₄ vapor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3118–3122, 2006     

Reactivity ratios and copolymer properties of 2‐(diisopropylamino)ethyl methacrylate with methyl methacrylate and styrene

Free radical copolymerization kinetics of 2‐(diisopropylamino)ethyl methacrylate (DPA) with styrene (ST) or methyl methacrylate (MMA) was investigated and the corresponding copolymers obtained were characterized. Polymerization was performed using tert‐butylperoxy‐2‐ethylhexanoate (0.01 mol dm^?3) as initiator, isothermally (70 °C) to low conversions (<10 wt%) in a wide range of copolymer compositions (10 mol% steps). The reactivity ratios of the monomers were calculated using linear Kelen–Tüd?s (KT) and nonlinear Tidwell–Mortimer (TM) methods. The reactivity ratios for MMA/DPA were found to be r₁ = 0.99 and r₂ = 1.00 (KT), r₁ = 0.99 and r₂ = 1.03 (TM); for the ST/DPA system r₁ = 2.74, r₂ = 0.54 (KT) and r₁ = 2.48, r₂ = 0.49 (TM). It can be concluded that copolymerization of MMA with DPA is ideal while copolymerization of ST with DPA has a small but noticeable tendency for block copolymer building. The probabilities for formations of dyad and triad monomer sequences dependent on monomer compositions were calculated from the obtained reactivity ratios. The molar mass distribution, thermal stability and glass transition temperatures of synthesized copolymers were determined. Hydrophobicity of copolymers depending on the composition was determined using contact angle measurements, decreasing from hydrophobic polystyrene and poly(methyl methacrylate) to hydrophilic DPA. Copolymerization reactivity ratios are crucial for the control of copolymer structural properties and conversion heterogeneity that greatly influence the applications of copolymers as rheology modifiers of lubricating oils or in drug delivery systems. © 2015 Society of Chemical Industry     

Free‐radical copolymerization and kinetic treatment of methyl methacrylate with N‐P‐tolylmaleimide

The free‐radical copolymerization of methyl methacrylate (MMA) with N‐P‐tolylmalemide (NPTMI) at 77°C in cyclohexanone solution initiated by AIBN was studied. The copolymer composition was calculated from the nitrogen content estimated by the Mico–Kijedldahl's method and by elemental analysis. The reactivity ratios have been calculated by Fineman and Ross method. The monomer reactivity ratios were r_NPTMI = 1.24, r_MMA = 2.1. The glass transition temperature (T_g) of the copolymers were determined by torsion braid analysis (TBA). The thermal stability was determined by thermogravimetric analysis (TGA). T₅₀, temperature at which the weight loss reaches 50%, was abstained. The results showed that the M _n and M _w increased, whereas the NPTMI feed content increased. The T_g and T₅₀ increased dramatically. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 867–870, 2004     

Branched copolymers with biodegradable core and pendant oxirane groups

The reactive oxirane groups were incorporated into the macromolecule as substituents in the side chains of loosely‐grafted copolymer or in the arms of star‐shaped copolymer using glycidyl methacrylate (GMA) in the controlled atom transfer radical polymerization (ATRP). The branched GMA copolymers with various architectures were obtained by using hydrophobic copolymers containing six and seven units of caprolactone 2‐(methacryloyloxy)ethyl ester (CLMA) functionalized with bromoester groups, and trifunctional poly(ε‐caprolactone) (PCL), as well as hydrophilic tri‐, and six‐functional acetal derivatives of D ‐glucopyranosides as (macro)initiators with biodegradable and biocompatible properties. The well‐defined copolymers with core‐shell structures and polymerization degrees of GMA in the range of 20–100 per side chain/arm at 20–70% of monomer conversion within 1–6 h and narrow molecular weight distributions (M_w/M_n = 1.14–1.4) were obtained. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Radical copolymerization between methyl methacrylate and N‐cyclohexylmaleimide with thiol as an inifer

N‐dodecanethiol (RSH) was found efficient to initiate the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) at 40–60°C. The initial copolymerization rate, R_p, increases respectively with increasing [RSH] and the mol fraction of NCMI in the comonomer feed, f_NCMI. The molecular weight of the copolymer decreases with increasing [RSH]. The initiator transfer constant of RSH was determined to be C_I = 0.21. The apparent activation energy of the overall copolymerization was measured to be 46.9 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.32 and r_MMA = 1.35. The glass transition temperature of the copolymer increases obviously with increasing f_NCMI, which indicates that adding NCMI may improve the heat resistance of plexiglass. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1417–1423, 1999     

Copolymerization of 4-cyanophenyl methacrylate with methyl methacrylate: Synthesis,characterization and determination of monomer reactivity ratios

Summary A novel methacrylic monomer, 4-cyanophenyl methacrylate (CPM) was synthesized by reacting 4-cyanophenol dissolved in methyl ethyl ketone (MEK) with methacryloyl chloride in the presence of triethylamine as a catalyst. Copolymers of CPM with methyl methacrylate(MMA) at different composition was prepared by free radical solution polymerization at 70±1 °C using benzoyl peroxide as initiator. The copolymers were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The solubility of the polymers was tested in various polar and non polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in mole fraction of MMA content. The thermal stability of the copolymer increases with increases in mole fraction of CPM content in the copolymer. The copolymer composition was determined by using ¹H-NMR spectroscopy. The monomer reactivity ratios estimated by the application of linearization methods such as Fineman-Ross (r₁=2.524±0.038, r₂=0.502±0.015), Kelen-Tudos (r₁=2.562±0.173, r₂=0.487±0.005) and extended Kelen-Tudos methods (r₁=2.735±0.128, r₂=0.4915±0.007).