Synthesis and characterization of 2‐oxazoline‐benzoxazine compound and its polymer

A novel 2‐oxazoline‐benzoxazine (POB) was synthesized with 2‐(hydroxylphenyl)‐2‐oxazoline, 1,3,5‐triphenylhexahydro‐1,3,5‐triazine and paraformaldehyde. The chemical structure of the monomer was confirmed by FTIR, ¹H‐NMR, ¹³C‐NMR, and MS. The curing behavior of the monomer was studied by DSC and FTIR, and the ring opening reaction of the monomer was found to occur from 187.5°C. The results of DMA and TGA demonstrated that the thermal properties of polymer for POB monomer (P‐m) are better than polymer for POB precursor (P‐p), because that the oligomer in benzoxazine precursor decreased the perfection of the polymer's network structure; it was also found that the thermal properties of P‐m and P‐p are much better than the common polybenzoxazine and the composite material of benzoxazine and 2‐oxazoline. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci , 2008.     

Synthesis, characterization, and thermally activated polymerization behavior of bisphenol-S/aniline based benzoxazine

A difunctional benzoxazine monomer, 6,6′-bis(3-phenyl-3,4-dihydro-2H-benzo[e][1,3]oxazinyl) sulfone (BS-a), was synthesized via a solution method from bisphenol-S, aniline and formaldehyde. The chemical structure of the benzoxazine was confirmed by ¹H and ¹³C nuclear magnetic resonance spectroscopy, Fourier transform infrared (FTIR) spectroscopy, elemental analysis, and size exclusion chromatography. The ring-opening polymerization of BS-a monomer was investigated with FTIR under air and nitrogen atmospheres, and with differential scanning calorimetry (DSC) in both dynamic and isothermal conditions. The FTIR results show that the absorption intensities of C-O-C, C-N-C, and oxazine ring decrease gradually with temperature and time rising during the polymerization reaction. The change rates of some absorption intensities of oxazine ring are affected by different atmospheric environments, and a higher degree of conversion is obtained in nitrogen than that in air at the same reaction temperature and in equal time. Kinetic parameters of the dynamic polymerization DSC results were evaluated with Kissinger and Ozawa methods, respectively. The isothermal DSC results show that the polymerization reaction of BS-a monomer follows an autocatalytic mechanism.     

One‐step synthesis of triarm block copolymers via simultaneous reversible‐addition fragmentation chain transfer and ring‐opening polymerization

One‐step synthesis of star copolymers by reversible addition–fragmentation chain transfer (RAFT) and ring‐opening polymerization (ROP) by using a novel dual initiator is reported. Triarm block copolymers comprising one polystyrene (or polyacrylamide) arm and two poly(β‐butyrolactone) arms were synthesized in one‐step by simultaneous RAFT polymerization of styrene (St) (or acrylamide, designated as AAm) and ROP of β‐butyrolactone (BL) in the presence of a novel trifunctional initiator, 1,2‐propanediol ethyl xanthogenate (RAFT‐ROP agent). This dual initiator was obtained through the reaction of 3‐chloro‐1,2‐propanediol with the potassium salt of ethyl xanthogenate. The principal parameters such as monomer concentration, initiator concentration, and polymerization time that affect the one‐step polymerization reaction were evaluated. The characterization of the products was achieved using Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H‐NMR), ¹³C‐nuclear magnetic resonance (¹³C‐NMR), Gas chromatography–mass spectrometry (GC–MS), gel‐permeation chromatography (GPC), thermogravimetric analysis (TGA), and fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxy‐ ethylamino)propoxy]propyl}polydimethylsiloxane

A novel synthesis path for the monotelechelic polydimethylsiloxane with a diol‐end group, α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxyethylamino)propoxy]propyl}polydimethylsiloxane, is described in this article. The preparation included three steps, which were anionic ring‐opening polymerization, hydrosilylation, and epoxy addition. The structure and polydispersity index of the products were analyzed and confirmed by FTIR, ¹H NMR, ¹³C NMR, H? H, and C? H. Correlated Spectroscopy and gel permeation chromatography. The results demonstrated that each step was successfully carried out and the targeted products were accessed in all cases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of polysiloxane‐acrylate latexes with MPS‐PDMS oligomer as macromonomer

The latexes of polysiloxane and acrylate with methacryloxypropyl trimethoxysilane (MPS)–polydimethylsiloxane (PDMS) oligomer as macromonomer and Gemini surfactant as coemulsifier were prepared by emulsion copolymerization and characterized by ¹H‐nmr, gel‐permeation chromatography (GPC), FTIR, x‐ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). First, the oligomer of MPS‐PDMS (Si? O? Si chain length = 24) were synthesized by the hydrolysis of MPS and the ring‐opening polymerization of octamethyl tetracyclosiloxane (D₄), the ¹H‐NMR and FTIR spectra indicated that when the reaction time was prolonged to 2 h, more than 90% of ? Si (OCH₃)₃ groups were hydrolyzed; Then, the emulsion polymerization was performed with the oligomer as macromonomer and Gemini Surfactant as coemulsifier, the result of FTIR indicated that almost all the macromonomer had been exhausted because there was no C?C characteristic peaks in the spectrum. XPS investigation of the latexes showed that with the increase of siloxane content, more and more polysiloxane occupied the outer layer of the membrane, which agreed well with the conclusion of contact angle and AFM measurements. With Gemini surfactant as coemulsifier in the system, the PDMS content in the system could reach to 50%, which was far higher than the other reported value. © 2009 Wiley Periodicals, Inc. Journal of Applied Polymer Science, 2009     

Using hydroxypropyl‐β‐cyclodextrin for the preparation of hydrophobic poly(ketoethyl methacrylate) in aqueous medium

This work was committed to the polymerization of hydrophobic ketoethyl methacrylate monomer in aqueous medium in the presence of cyclodextrin, instead of polymerizing the monomer in toxic and volatile organic solvents. For this purpose, a new ketoethyl methacrylate monomer, p‐methylphenacylmethacrylate (MPMA), was synthesized from the reaction of p‐methylphenacylbromide with sodium methacrylate in the presence of triethylbenzylammonium chloride. The monomer was identified with FTIR, ¹H and ¹³C‐NMR spectroscopies. Hydroxypropyl‐β‐cyclodextrin (HPCD) was used to form a water‐soluble host/guest inclusion complex (MPMA/HPCD) with the hydrophobic monomer. The complex was identified with FTIR and NMR techniques and polymerized in aqueous medium using potassium persulfate as initiator. During polymerization the resulting hydrophobic methacrylate polymer precipitated out with a majority of HPCD left in solution and a minority of HPCD bonded on the resulting polymer. The thus‐prepared polymer exhibited little difference from the counterparts obtained in organic solvent in number average molecular weight (M_n), polydispersity (M_w/M_n) and yield. The investigation provides a novel strategy for preparing hydrophobic ketoethyl methacrylate polymer in aqueous medium by using a monomer/HPCD inclusion complex. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of a novel terephthalate‐bridged ladderlike polymethylsiloxane

A novel soluble terephthalate‐bridged ladderlike polymethylsiloxane was synthesized successfully by stepwise coupling polymerization in three steps, including hydrosilylation coupling, hydrolysis and polycondensation. The bis(3‐methyldichlorosilylpropyl) terephthalate monomer was first synthesized by hydrosilylation reaction in the presence of dicyclopentadienylplatinum(II) chloride (Cp₂PtCl₂) catalyst. The structures of the monomer and the polymer were characterized by FTIR, ¹H NMR, ¹³C NMR and ²⁹Si NMR spectroscopy, mass spectrometry, X‐ray diffraction, differential scanning calorimetry, vapour pressure osmometry and gel permeation chromatography. Characterization data indicate that the synthesized polymer possesses an ordered ladderlike structure. © 2000 Society of Chemical Industry     

Synthesis and characterization of new cardo poly(bisbenzothiazole)s from 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride

A new monomer 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride, bearing the bulky pendant 4‐tert‐butylcyclohexylidene group, was synthesized from 4‐tert‐butylcyclohexanone in three steps. Its chemical structure was characterized by ¹H NMR, ¹³C NMR, MS, FTIR, and EA. Aromatic poly(bisbenzothiazole)s (PBTs V) were prepared from the new monomer and five aromatic dicarboxylic acids by direct polycondensation. The inherent viscosities were in the range of 0.63–2.17 dL/g. These polymers exhibited good solubility and thermal stability. Most of the prepared PBTs V were soluble in various polar solvents. Thermogravimetric analysis showed the decomposition temperatures at 10% weight loss that were in the range of 495–534°C in nitrogen. All the PBTs V, characterized by X‐ray diffraction, were amorphous. The UV absorption spectra of PBTs V showed a range of λ_max from 334 to 394 nm. All the PBTs V prepared had evident fluorescence emission peaks, ranging from 423 to 475 nm with different intensity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2000–2008, 2006     

Synthesis of UV‐curable difunctional silane monomer based on 3‐methacryloxy propyl trimethoxysilane (3‐MPTS) and its UV‐curing characteristics and thermal stability

In the present investigation, silicon containing UV‐curable difunctional monomer was synthesized by reacting 3‐methacryloxy propyl trimethoxysilane (3‐MPTS) with acrylic acid using anhydrous ether as a solvent under inert atmosphere. The synthesized acryloxymethacryloxy silane monomer was characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The silane monomer along with 4 wt % photoinitiator (Darocure 1173) was cured under UV‐light for different exposure time. The curing characteristic of the monomer was investigated using FTIR spectroscopy. The conversion of the double bond due to curing has been evaluated from the peak intensity of the C?C double bond (at 1636 cm^?1) in the FTIR spectrum considering the peak intensity at 1720 cm^?1 due to C?O as internal standard. The maximum double bond conversion is observed to be 72%. The optimum cure time for the silane monomer has been estimated to be 7.8 sec. The UV‐cured sample decomposes at 440°C. The char residue is 35% at 700°C. The synthesized UV‐curable silane monomer may be useful for UV‐coating formulations, for fabrication of 3D‐objects by lithographic technique and as a precursor for organic–inorganic hybrid materials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly[(1‐vinyl‐1,2,4‐triazole)‐co‐(monomer with carboxylic acid group(s))] and determination of monomer reactivity ratios: I. Acrylic acid

Copolymers of 1‐vinyl‐1,2,4‐triazole (VTAz) and acrylic acid (AA) having different mole ratios were synthesized using free radical‐initiated solution polymerization in dimethylformamide at 70 °C with α,α′‐azobisisobutyronitrile as initiator in nitrogen atmosphere. The compositions of the synthesized copolymers for a wide range of monomer feeds were determined using Fourier transform infrared (FTIR) spectroscopy through recorded absorption bands for VTAz (1510 cm^?1, C?N (triazole ring) stretching mode) and AA (1710 cm^?1, C?O stretching mode) units. The structures of the copolymers were characterized using FTIR and ¹H NMR spectroscopy. The copolymer compositions were also determined from ¹H NMR analysis following proton signals of carboxyl group at 11.8–12.5 ppm of AA and of triazole ring at 7.5–8.1 ppm of VTAz. Monomer reactivity ratios for the VTAz‐AA pair were estimated using linear methods, i.e. Fineman–Ross (FR) and Kelen–Tüdös (KT). From FTIR evaluation, monomer reactivity ratios were calculated as r₁ = 0.404 and r₂ = 1.496 using the FR method and r₁ = 0.418 and r₂ = 1.559 using the KT method. These values were found to be very close to those obtained from NMR evaluation. The two cases r₁r₂ < 1 and r₁ < r₂ indicated the random distribution of the monomers in the final copolymers and the presence of a greater amount of AA units in the copolymer than in the feed, respectively. The observed relatively high activity of complexed growing radical‐AA^? … VTAz was explained by the effect of complex formation between carbonyl groups and triazole fragments in chain growth reactions. Thermal behaviours of copolymers with various compositions were investigated using thermogravimetric and differential scanning calorimetric analyses. It was observed that thermal stabilities and glass transition temperatures of the copolymers increased resulting from complex formation between acid and triazole units. © 2012 Society of Chemical Industry     

Synthesis,cationic polymerization and curing reaction with epoxy resin of 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane

A new spiro ortho carbonate, 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane was prepared by the reaction of 2‐methoxybenzyl‐1,3‐propanediol with di(n‐butyl)tin oxide, following with carbon disulfide. Its cationic polymerization was carried out in dichloromethane using BF₃‐OEt₂ as catalyst. The [¹H], [¹³C]NMR and IR data as well as elementary analysis of the polymers obtained indicated that it underwent double ring‐opening polymerization. The polymerization mechanism is discussed. The curing reaction of bisphenol A type epoxy resin in the presence of the monomer and a curing agent was investigated. DSC measurements were used to follow the curing process. In the case of boron trifluoride‐o‐phenylenediamine (BF₃‐OPDA) as curing agent, two peaks were found on the DSC curves, one of which was attributed to the polymerization of the epoxy group, and the other to the copolymerization of the monomer with the isolated epoxy groups or homopolymerization. However, when BF₃‐H₂NEt was used as curing agent, only one peak was present. IR measurement of the modified epoxy resin with various weight ratios of epoxy resin/monomer was performed in the presence of BF₃‐H₂NEt as curing agent. The results demonstrate that the conversion of epoxy group increases as the content of monomer increases. The curing process and the structure of the epoxy resin network are discussed. © 2000 Society of Chemical Industry     

Online monitoring of reaction temperature during cationic ring opening polymerization of epichlorohydrin in presence of BF3 and 1,4‐butanediol

This work introduces cationic ring opening polymerization of polyepichlorohydrin (PECH) produced under various reaction conditions (set temperature: ?10 to 40°C, [C]/[I] ratio: 0.1–1, monomer feed rate: 1–4 mL/min). In addition, a correlation between the exothermic reaction temperature and the performance of the PECH was obtained by utilizing a reaction temperature monitoring system, GPC, ¹H‐NMR, and FTIR. During the polymerization, an induction period which affects the polydispersity was observed below 10°C. At lower temperatures and lower [C]/[I] ratios, a higher induction period was observed. The monomer feed rate did not affect the induction period but it highly affected the polydispersity when the induction period occurred. The total molecular weight of PECH increased with decreasing set temperature even though the amount of low molecular weight cyclic oligomer increased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39912.     

Synthesis of Poly(3,3‐Bis‐Azidomethyl Oxetane) via Direct Azidation of Poly(3,3‐Bis‐Bromo Oxetane)

In order to avoid using highly unstable and sensitive monomer 3,3‐bis‐azidomethyl oxetane, poly(3,3‐bis‐azidomethyl oxetane) (PBAMO) was successfully synthesized via azidation of poly(3,3‐bis‐bromo oxetane) (PBBrMO) in the aprotic and polar solvent cyclohexanone in the presence of a catalyst. It was found that the azidation proceeded very fast and almost completed in 6 h when the reaction temperature was up to 115 °C. PBAMO was characterized by gel permeation chromatography (GPC), Fourier transform infrared spectrometry (FTIR), hydrogen nuclear magnetic resonance (¹H NMR), and carbon nuclear magnetic resonance (¹³C NMR).     

Ring‐opening polymerization of trimethylenecarbonate and its copolymerization with ϵ‐caprolactone by lanthanide (II) aryloxide complexes

Lanthanide metal (II) 2,6‐di‐tert‐butylphenoxide complexes (ArO)₂Ln(THF)₃ (Ln = Sm 1 , Yb 2 ) alone have been developed to catalyze the ring‐opening polymerization of trimethylenecarbonate (TMC) and random copolymerization of TMC and ε‐caprolactone (ε‐CL) for the first time. The influence of reaction conditions, such as initiator, initiator concentration, polymerization temperature, and polymerization time, on monomer conversion, molecular weight, and molecular weight distribution of the resulting PTMC was investigated. It was found that the divalent complex 1 showed higher activity for the polymerization of TMC than complex 2 . The random structure and thermal behavior of the copolymers P(TMC‐co‐CL) have been characterized by ¹H NMR, ¹³C NMR, GPC, and DSC analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Biodegradable poly(vinyl alcohol)‐graft‐ poly(ε‐caprolactone) comb‐like polyester: Microwave synthesis and its characterization

Poly(vinyl alcohol)‐initiated microwave‐assisted ring opening polymerization of ε‐caprolactone in bulk was investigated, and a series of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) (PVA‐g‐PCL) copolymers were prepared, with the degree of polymerization (DP) of PCL side chains and the degree of substitution (DS) of PVA by PCL being in the range of 3–24 and 0.35–0.89, respectively. The resultant comb‐like PVA‐g‐PCL copolymers were confirmed by means of FTIR, ¹H NMR, and viscometry measurement. The introduction of hydrophilic backbone resulted in the decrease in both melting point and crystallization property of the PVA‐g‐PCL copolymers comparing with linear PCL. With higher microwave power, the DP of PCL side chains and DS of PVA backbone were higher, and the polymerization reaction proceeded more rapidly. Both the DP and monomer conversion increased with irradiation time, while the DS increased first and then remained constant. With initiator in low concentration, the DP and DS were higher, while the monomer was converted more slowly. Microwaves dramatically improved the polymerization reaction in comparison of conventional heating method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 3973–3979, 2007     

Synthesis and characterization of a ferrocene‐modified,polyaniline‐like conducting polymer

A novel monomer called 1,1′‐ferrocenediacyl anilide (FcA) was synthesized from ferrocene (Fc). Copolymerization was carried out between FcA and aniline (ANI) by an electrochemical method. The novel monomer and copolymer were characterized with ¹H‐NMR, Fourier transform infrared (FTIR) spectroscopy, and ultraviolet–visible (UV–vis) spectroscopy. The hydrogen protons of the benzene ring were moved to a low field in ¹H‐NMR, and the absorption band of N?Q?N (where Q is the quinoid ring) appeared in the FTIR spectrum of the polymer. The peaks of both Fc and the π–π* electronic transition in the UV–vis spectra were redshifted. The results indicate that the copolymer mainly existed as a highly delocalized conjugated system. X‐ray diffraction analysis established further proof, and the process of electrochemical deposition was observed by scanning electron microscopy. The optimal synthesis conditions of the copolymer were determined through changes in the monomer molar ratios and the scan rate. The ideal performance of the copolymer was gained when the monomer molar ratio between FcA and ANI was 1:4 and the scan rate was 50 mV/s. Furthermore, the electrochemical performances were tested in detail by cyclic voltammetry, galvanostatic charge–discharge testing, and electrochemical impedance spectroscopy. The results show that the specific capacitance of poly(1,1′‐ferrocenediacyl anilide‐co‐aniline) increased up to 433.1 F/g at 0.5 A/g, the diffusion resistance was very small, and the durability was good enough. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43217.     

Ring‐opening polymerization of ε‐caprolactone with a divalent samarium bis(phosphido) complex

The ring‐opening polymerization of ε‐caprolactone initiated with a divalent samarium bis(phosphido) complex [Sm(PPh₂)₂] is reported. The polymerization proceeded under mild reaction conditions and resulted in polyesters with number‐average molecular weights of 8.2 × 10³ to 12.5 × 10³. The yield and molecular weight of poly(ε‐caprolactone)s were dependent on the experimental parameters, such as the monomer/initiator molar ratio, the monomer concentration, the reaction temperature, and the polymerization time. The obtained polymers were characterized with Fourier transform infrared, NMR, gel permeation chromatography, and differential scanning calorimetry. On the basis of an end‐group analysis of low‐molecular‐weight polymers by NMR spectroscopy, a coordination–insertion mechanism is proposed for the polymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1558–1564, 2005     

Curing kinetics and structural changes of a of di[(N‐m‐acetenylphenyl) phthalimide] ether/[(methyl) diphenylacetylene] silane copolymer

Differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and ¹³C‐NMR were used to characterize the curing kinetics and structural changes of a copolymer of di[(N‐m‐acetenylphenyl) phthalimide] ether (DAIE) and [(methyl) diphenylacetylene] silane (MDPES). The results show that the apparent activation energy (E) and reaction order (n) calculated according to the Kissinger method were nearly the same as those calculated according to the Ozawa method. E was 160.4 kJ/mol and n was 0.96 with the Kissinger method, and E was 158.1 kJ/mol and n was 0.95 with the Ozawa method. The FTIR and solid‐state ¹³C‐NMR results also indicate that with increasing curing temperature, the peaks assigned to Si? H and C?C bonded to phenylene carbons decreased, broadened, and finally vanished, whereas the peaks assigned to the C?C carbons and phenyl carbons increased and broadened. Crosslinking reactions in the curing of the DAIE/MDPES copolymer were possible due to the hydrosilylation reaction and the Diels–Alder reaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2126–2130, 2006     

Synthesis and characterization of ABA type tri‐block copolymers derived from p‐dioxanone,L‐lactide and poly(ethylene glycol)

A series of triblock co‐polymers, consisting of a poly(ethylene glycol) (PEG) central block joined to two blocks of random p‐dioxanone‐co‐L ‐lactide copolymers were synthesized by ring‐opening polymerization of p‐dioxanone (PDO) and L ‐lactide (LLA) initiated by PEG in the presence of stannous 2‐ethylhexanoate catalyst. The resulting copolymers were characterized by various techniques including ¹H and ¹³C NMR and FTIR spectroscopies, gel permeation chromatography, inherent viscosity, wide‐angle X‐ray diffractometry (WAXD) and differential scanning calorimetry (DSC). The conversion of PDO and L ‐lactide into the polymer was studied various mole ratios and at different polymerization temperature from ¹H NMR spectra. Results of WAXD and DSC showed that the crystallinity of PEG macroinitiator was greatly influenced by the composition of PDO and L ‐lactide in the copolymer. The triblock copolymers with low molecular weight were soluble in water at below room temperature. © 2003 Society of Chemical Industry