Viscometric Study of the Inclusion Complex Between β‐Cyclodextrin and HTAC in Aqueous Solution

The inclusion complex formed by β‐cyclodextrin (β‐CD) with the cationic surfactant hexadecyltrimethylammonium chloride (HTAC) was studied by viscometry using poly(ethylene oxide) (PEO)–HTAC aggregates as a viscosity indicator. The relative viscosity of β‐CD in aqueous PEO–HTAC solution profiles shows that the formation of the β‐CD/HTAC inclusion complex causes HTAC molecules to be stripped off the PEO chains, resulting in a decrease of aqueous solution viscosity as a result of the decrease in electrostatic repulsion between polymer‐bound HTAC micelles. The viscosity minimum at C_β‐CD/C_HTAC = 0.5 indicates that the molecular ratio of host molecule to guest molecule is 1:2 in the β‐CD/HTAC inclusion complex.     

A facile and practical approach to randomly methylated β‐cyclodextrin

BACKGROUND: Because of its high demand for use in pharmaceutical products, cosmetics, soil remediation technologies, etc., randomly methylated β‐cyclodextrin (RM‐β‐CD) is one of the most important cyclodextrin (CD) derivatives. The aim of this present work is to use a green and commercially available approach to obtain RM‐β‐CD. Compared with other methylated CDs, RM‐β‐CD with an asymmetric molecular structure has higher water solubility. When the degree of substitution (DS) is about 1.8, the solubility tends to increase with increasing temperature and is suitable for pharmaceutical applications. RESULTS: RM‐β‐CD was synthesized using a green approach with ideal DS equal to 1.79. The one step process of β‐cyclodextrin methylation by CH₃Cl instead of (CH₃)₂SO₄ at mild temperature (80 °C) and pressure (1.60 MPa) with a good yield (78%), is convenient and environmentally friendly. The mixture of RM‐β‐CD obtained contained five compounds with various DS, from which the main compound with a DS equal to 1.8 was separated by column chromatography. The compounds were carefully characterized by infra‐red, NMR and mass spectrometry. CONCLUSIONS: The one‐step process to RM‐β‐CDs with CH₃Cl is more economical, more efficient and less noxious than the usual method using (CH₃)₂SO₄. Moreover, this approach avoids some poisonous residual materials and meets the demand for protecting the environment. Copyright © 2009 Society of Chemical Industry     

Synthesis of chitosan‐graft‐β‐cyclodextrin for improving the loading and release of doxorubicin in the nanopaticles

Chitosan‐graft‐β‐cyclodextrin (CS‐g‐β‐CD) copolymer was synthesized by conjugating β‐cyclodextrins to chitosan molecules through click chemistry. The copolymer structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). CS‐g‐β‐CD/CMC nanoparticles were prepared by a polyelectrolyte complexation process in aqueous solution between CS‐g‐β‐CD copolymer and carboxymethyl chitosan (CMC), which was used to load anticancer drug (Doxorubicin hydrochloride, DOX·HCl) with hydrophobic group. The particle size, surface charge, zeta potential, and morphology of the nanoparticles were characterized with dynamic light scattering. The drug loading efficiency and in vitro release of DOX·HCl of the nanoparticles were measured by ultraviolet spectrophotometer. The results demonstrated that the size, surface charge and drug loading efficiency of the nanoparticles could be modulated by the fabrication conditions. The drug loading efficiency of CS‐g‐β‐CD/CMC nanoparticles was improved from 52.7% to 88.1% because of the presence of β‐CD moieties with hydrophobic cavities, which can form inclusion complexes with the drug molecules. The in vitro release results showed that the CS‐g‐β‐CD/CMC nanoparticles released DOX·HCl in a controlled manner, importantly overcoming the initial burst effect. These nanoparticles possess much potential to be developed as anticancer drug delivery systems, especially those drugs with hydrophobic group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41034.     

Preparation and characterization of a temperature‐sensitive nonwoven poly(propylene) with increased affinity for guest molecules

A temperature‐sensitive hydrogel with the capability of inclusion complex formation with guest molecules was successfully grafted onto the surface of nonwoven polypropylene (nonwoven PP). This was carried out by the use of N‐isopropylacrylamide monomer and a modified cyclodextrin (acrylamidomethyl‐β‐cyclodextrin (β‐CD‐NMA)). Fourier‐transform infra red (FT‐IR) and elemental analyses confirmed the presence of poly(N‐isopropylacrylamide) (PNIPAAm) and β‐CD‐NMA components on the surface of the textile. Equilibrium swelling ratio measurements showed that the grafted hydrogel maintained its temperature‐sensitive property compared to a nongrafted hydrogel. The effect of β‐CD‐NMA and crosslink agent concentrations on the grafting yield was studied. The β‐CD‐NMA content into the PNIPPAM‐ β‐CD‐NMA grafted nonwoven PP (PNIPAAm‐β‐CD‐NMA‐PP) was estimated by FT‐IR through a new procedure. The estimated amounts of β‐CD‐NMA in PNIPAAm‐β‐CD‐NMA‐PP were determined to be 0.9, 1.9 mg g^?1 for 0.019M and 0.049M concentrations of β‐CD‐NMA in monomer solution, respectively. The PNIPAAm‐β‐CD‐NMA‐PP showed a remarkable increase in absorbance affinity of 8‐anilino‐1‐naphthalenesulfonic acid ammonium salt at 20°C from 0.93 to 3.33 µmol g^?1 compared to PNIPAAm‐PP. Furthermore, the results showed a temperature‐sensitive loading affinity for PNIPAAm‐β‐CD‐NMA‐PP in absorbance of guest molecules due to the presence of β‐CD‐NMA. The use of hydrophobic guest molecules such as fragrance oils and antibiotics in modified fabrics can provide new applications in textile and pharmaceutical industry. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40497.     

Synthesis,Rhodium Complexes and Catalytic Applications of a New Water‐Soluble Triphenylphosphane‐Modified β‐Cyclodextrin

A new triphenylphosphane based on a β‐cyclodextrin skeleton (PM‐β‐CD‐OTPP) was synthesized. This ligand can be dispersed in water by using the nanoprecipitation method. Transmission electron microscopy and NMR spectroscopy showed that PM‐β‐CD‐OTPP is aggregated in water and forms a stable dispersion. Its aqueous solubility can be dramatically increased in the presence of selected water‐soluble guests by formation of inclusion complexes. Associated to a rhodium precursor, PM‐β‐CD‐OTPP is able to generate soluble rhodium species in water. In addition, NMR experiments showed that the cyclodextrin cavity remains accessible for a guest even when PM‐β‐CD‐OTPP is coordinated to rhodium. Finally, this ligand was efficient for rhodium‐catalyzed hydrogenation and hydroformylation performed in aqueous medium.     

Retention of Eucalyptol,a Natural Volatile Insecticide,in Delivery Systems Based on Hydroxypropyl‐β‐Cyclodextrin and Liposomes

Eucalyptol (Euc) is a natural monoterpene with insecticide effects. Being highly volatile and sensitive to ambient conditions, its encapsulation would enlarge its application. Euc‐loaded conventional liposomes (CL), cyclodextrin/drug inclusion complex, and drug‐in‐cyclodextrin‐in‐liposomes (DCL) are prepared to protect Euc from degradation, reduce its evaporation, and provide its controlled release. The liposomal suspension is freeze‐dried using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as cryoprotectant. The liposomes are characterized before and after freeze‐drying. The effect of Euc on the fluidity of liposomal membrane is also examined. A release study of Euc from delivery systems, in powder and reconstituted forms, is performed by multiple head extraction at 60 °C after 6 months of storage at 4 °C. CL and DCL suspensions are homogeneous, show nanometric vesicles size, spherical shape, and negative surface charge before and after freeze‐drying. Moreover, HP‐β‐CD does not affect the fluidity of liposomes. CL formulations present a weak encapsulation for Euc. The loading capacity of eucalyptol in DCL is 38 times higher than that in CL formulation. In addition, freeze‐dried DCL and HP‐β‐CD/Euc inclusion complex show a higher retention of eucalyptol than CL delivery system. Both carrier systems HP‐β‐CD/Euc and Euc‐loaded DCL decrease Euc evaporation and improve its retention. Practical Applications: Eucalyptol is a natural insecticide. It is highly volatile and poorly soluble in water. To enlarge its application, its encapsulation in three delivery systems (conventional liposomes, cyclodextrin/drug inclusion complex, combined system composed of cyclodextrin inclusion complex and liposome) is studied. In this paper it is proved that cyclodextrin/eucalyptol inclusion complex and eucalyptol‐in‐cyclodextrin‐in‐liposome are effective delivery systems for encalyptol encapsulation, retention, and release.     

Synthesis and Properties of Alkoxyethyl β‐d‐Xylopyranoside

In order to improve the water solubility of sugar‐based surfactants, alkyl β‐d‐ xylopyranosides, novel sugar‐based surfactants, 1,2‐trans alkoxyethyl β‐d‐ xylopyranosides, with alkyl chain length n = 6–12 were stereoselectively prepared by the trichloroacetimidate method. Their properties including hydrophilic–lipophilic balance (HLB) number, water solubility, surface tension, emulsification, foamability, thermotropic liquid crystal, and hygroscopicity were investigated. The results indicated that their HLB number decreased with increase of alkyl chain, the water solubility improved since the hydrophilic oxyethene (─OCH₂CH₂─) fragment was introduced. The dissolution process was entropy driven at 25–45 °C for alkyl chain length n = 6–10. Octyloxyethyl β‐d‐ xylopyranoside had the best foaming ability. Nonyloxyethyl β‐d‐ xylopyranoside had the best foam stability and the emulsifying ability was better in toluene/water system than in rapeseed oil/water system. The surface tension of in aqueous solution dropped to 27.8 mN m^?1 at the critical micelle concentration, and it also showed the most distinct thermotropic liquid phases with cross pattern texture upon heating and the fan schlieren texture on cooling. Hexyloxyethyl β‐d‐ xylopyranoside possessed the strongest hygroscopicity. Based on the effective improvement of water solubility, the prepared alkoxyethyl β‐d‐ xylopyranosides showed excellent surface activity and are expected to develop their practical application as a class of novel sugar‐based surfactants.     

A water‐soluble supramolecular‐structured photoinitiator between methylated β‐cyclodextrin and 2,2‐dimethoxy‐2‐phenylacetophenone

A water‐soluble supramolecular‐structured photoinitiator (SSPI) was synthesized by supramolecular self‐assembling between methylated β‐cyclodextrin (MβCD) and hydrophobic 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA). The structure of SSPI was characterized by X‐ray diffraction, FTIR, ¹H NMR, UV–vis, and fluorescence spectra. The results indicated that MβCD and DMPA had formed 1 : 1 inclusion complex in methanol solution. The binding constant (K) for the complex was 7.51 × 10²M^?1. SSPI could be dissolved in water easily and its water‐solubility was 15.3 g/100 mL. SSPI was the more efficient photoinitiator than DMPA for the photopolymerization of acrylamide (AM) in homogeneous aqueous system. The conversion for photopolymerization of trimethylolpropane triacrylate system initiated by SSPI was similar to that initiated by DMPA. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Altering associations of doxorubicin‐loaded alginate esters micelles in presence of β‐cyclodextrin

The aim of this article was to evaluate the effects of β‐cyclodextrin (β‐CD) on doxorubicin (DOX)‐loaded alginate esters (SA‐C₁₆) micelles (DOX/SA‐C₁₆) in aqueous solution. DOX was physically loaded into SA‐C₁₆ micelles by an o/w emulsion method with a substantial encapsulation efficiency (EE) level (36.12%), and DOX/SA‐C₁₆ was distributed in size diameters of approximately 254 nm. SA‐C₁₆ as carriers for the DOX can lead to the formation of associative networks in aqueous solutions between the hydrophobic tails of SA‐C₁₆ and DOX, and the dried morphology of DOX/SA‐C₁₆ aggregate was spherical shape. Addition of β‐CD to the system of DOX/SA‐C₁₆ facilitated decoupling of these associations via inclusion complex formation between β‐CD cavities and the polymer hydrophobic tails that produced the release of DOX immediately, and the EE level was dropped to 0.08%, and at the same time the size distribution of aggregate was increased to about 413 nm, moreover, the aggregate was relatively large and becoming irregular spherical shape. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40702.     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

Biocompatible,stimuli‐responsive hydrogel of chemically crosslinked β‐cyclodextrin as amoxicillin carrier

A novel pH‐responsive, chemically crosslinked hydrogelator (cl‐β‐CD/pVP) has been fabricated using β‐cyclodextrin (β‐CD) and N‐vinyl pyrollidone (N‐VP) in presence of diurethane dimethacrylate (DUDMA) crosslinker/azobisisobutyronitrile initiator through free radical polymerization. Various grades of cl‐β‐CD/pVP have been synthesized and the best grade has been considered with higher crosslinking density, higher gel strength, and lower % swelling ratio. The hydrogelator has been characterized by FTIR, ¹H and ¹³C NMR spectroscopy, TGA, and FESEM analyses. The hydrogelator demonstrates pH‐responsive behavior, which has been confirmed by swelling behavior and gel characteristics at various pH (at 37 °C). Using hen egg lysozyme, degradation experiment has been performed, which confirms the biodegradable nature of the hydrogel. The in vitro cytotoxicity study and live–dead assay suggest that the hydrogelator is cytocompatible toward MG‐63 cells. Finally, the hydrogelator shows excellent efficacy as an antibiotic (amoxicillin) carrier. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45939.     

Influence of polymer morphology on the adsorption behaviors of molecularly imprinted polymer‐methacrylic acid functionalized β‐cyclodextrin

The influence of molecularly imprinted polymer‐methacrylic acid functionalized β‐cyclodextrin (MIP(MAA‐β‐CD)) morphology on the adsorption behavior studies towards benzylparaben (BzP) was explored. The effects of time, concentration, and temperature towards BzP uptake were extensively evaluated. The adsorption performance of MIP(MAA‐β‐CD) was compared with that on the molecularly imprinted polymer‐methacrylic acid (MIP(MAA)) synthesized without β‐CD. The MIP(MAA‐β‐CD) was synthesized to obtain a spherical and spongy‐porous texture with a broad pore size distribution. The MIP(MAA‐β‐CD) showed fast kinetic and the intra‐particle diffusion model demonstrated a three step (surface and pore) adsorption process. The Koble‐Corrigan isotherm was the most suitable model for data fitting, which indicated that MIP(MAA‐β‐CD) had homogeneous and heterogeneous surfaces. This finding clearly demonstrated that the large uptake and strong affinity of MIP(MAA‐β‐CD) did not only probably result from the monomer‐template interactions, but also due to the morphological MIP(MAA‐β‐CD) structure. In contrary to MIP(MAA‐β‐CD), MIP(MAA) synthesized with uniform morphology and narrow pore size distribution had lower adsorption capacities and its kinetic data fitted the pseudo‐second order diffusion model, indicating a two‐step (surface only) adsorption process. The MIP(MAA) adsorption process followed the Langmuir isotherm model referred to solely homogeneous uptake. The calculated thermodynamic parameters showed that the BzP uptake was exothermic, spontaneous, and physisorption process onto MIPs, which supported the results of kinetics and isotherm adsorption data. This study clearly revealed that the presence of β‐CD improved the morphology of synthesized MIP, and automatically enhanced the adsorption behavior of MIP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42720.     

STD‐NMR Studies Suggest that Two Acceptor Substrates for GlfT2, a Bifunctional Galactofuranosyltransferase Required for the Biosynthesis of Mycobacterium tuberculosis Arabinogalactan,Compete for the Same Binding Site

The mycobacterial cell wall is a complex architecture, which has, as its major structural component, a lipidated polysaccharide covalently bound to peptidoglycan. This structure, termed the mycolyl–arabinogalactan–peptidoglycan complex, possesses a core galactan moiety composed of approximately 30 galactofuranosyl (Galf) resides attached via alternating β‐(1→6) and β‐(1→5) linkages. Recent studies have shown that the entire galactan is synthesized by the action of only two bifunctional galactofuranosyltransferases, GlfT1 and GlfT2. We report here saturation‐transfer difference (STD) NMR spectroscopy studies with GlfT2 using two trisaccharide acceptor substrates, β‐D ‐Galf‐(1→6)‐β‐D ‐Galf‐(1→5)‐β‐D ‐Galf‐O(CH₂)₇CH₃ ( 2 ) and β‐D ‐Galf‐(1→5)‐β‐D ‐Galf‐(1→6)‐β‐D ‐Galf‐O(CH₂)₇CH₃ ( 3 ), as well as the donor substrate for the enzyme, UDP‐Galf. Competition STD‐NMR titration experiments and saturation transfer double difference (STDD) experiments with 2 and 3 were undertaken to explore the bifunctionality of this enzyme, in particular to answer whether one or two active sites are responsible for the formation of both β‐(1→5)‐ and β‐(1→6)‐Galf linkages. It was demonstrated that 2 and 3 bind competitively at the same site; this suggests that GlfT2 has one active site pocket capable of catalyzing both β‐(1→5) and β‐(1→6) galactofuranosyl transfer reactions. The addition of UDP‐Galf to GlfT2 in the presence of either 2 or 3 generated a tetrasaccharide product; this indicates that the enzyme was catalytically active under the conditions at which the STD‐NMR experiments were carried out.     

Screening,Molecular Cloning,and Biochemical Characterization of an Alcohol Dehydrogenase from Pichia pastoris Useful for the Kinetic Resolution of a Racemic β‐Hydroxy‐β‐trifluoromethyl Ketone

The stereoselective synthesis of chiral 1,3‐diols with the aid of biocatalysts is an attractive tool in organic chemistry. Besides the reduction of diketones, an alternative approach consists of the stereoselective reduction of β‐hydroxy ketones (aldols). Thus, we screened for an alcohol dehydrogenase (ADH) that would selectively reduce a β‐hydroxy‐β‐trifluoromethyl ketone. One potential starting material for this process is readily available by aldol addition of acetone to 2,2,2‐trifluoroacetophenone. Over 200 strains were screened, and only a few yeast strains showed stereoselective reduction activities. The enzyme responsible for the reduction of the β‐hydroxy‐β‐trifluoromethyl ketone was identified after purification and subsequent MALDI‐TOF mass spectrometric analysis. As a result, a new NADP⁺‐dependent ADH from Pichia pastoris (PPADH) was identified and confirmed to be capable of stereospecific and diastereoselective reduction of the β‐hydroxy‐β‐trifluoromethyl ketone to its corresponding 1,3‐diol. The gene encoding PPADH was cloned and heterologously expressed in Escherichia coli BL21(DE3). To determine the influence of an N‐ or C‐terminal His‐tag fusion, three different recombinant plasmids were constructed. Interestingly, the variant with the N‐terminal His‐tag showed the highest activity; consequently, this variant was purified and characterized. Kinetic parameters and the dependency of activity on pH and temperature were determined. PPADH shows a substrate preference for the reduction of linear and branched aliphatic aldehydes. Surprisingly, the enzyme shows no comparable activity towards ketones other than the β‐hydroxy‐β‐trifluoromethyl ketone.     

Preparation and characterization of a novel responsive hydrogel with a β‐cyclodextrin‐based macromonomer

Based on a combination of poly(N‐isopropylacrylamide), which could respond to an external temperature, and β‐cyclodextrin (β‐CD), which could form a molecular inclusion complex, a novel hydrogel, having both thermal and pH sensitivities and containing β‐CD and N‐isopropylacrylamide (NIPA) segments, was synthesized. For the incorporation of β‐CD into the polymer network, a macromonomer was prepared first by the reaction of a β‐CD‐based polymer with maleic anhydride in dimethylformamide and then by copolymerization with NIPA in an aqueous solution. Elemental analysis, IR spectroscopy, differential scanning calorimetry, and swelling measurements were employed for the characterization of the hydrogel chain structure and its physical properties. With methyl orange as a model compound in inclusion tests, it was found that the hydrogel not only possessed a remarkable supramolecular inclusion ability (with respect to that of the small molecule cyclodextrin) but also could sensitively respond to various external stimuli, including the temperature, pH, and ionic strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 361–367, 2003     

Permanent fixation of β‐cyclodextrin on cotton surface—An assessment between innovative and established approaches

Attachment of β‐cyclodextrin (β‐CD) molecules on cotton textile provides hosting cavities that can include a large variety of guest molecules for specific functionality. Five different new and existing techniques were evaluated for connecting β‐CD and its derivatives to cotton surface. A comparison has been made in terms of maximum attachment of β‐CD on cotton surface. Novel chemical based crosslinking with homo‐bi‐functional reactive dye (C.I. reactive black 5) and grafting with reactive monochlorotriazinyl‐β‐cyclodextrin show maximum attachment to cotton surface. Innovative, enzymatic coupling of especially synthesized 6‐monodeoxy‐6‐mono(N‐tyrosinyl)‐β‐cyclodextrin was performed on cotton textile surface. Enzymatic coupling was also carried out in a homogeneous system and attachment confirmed by UV–vis spectroscopy. This tyrosinase mediated coupling is low temperature and very specific technique. A phenolphthalein based analytical method was partially modified to reliably measure the amount of attached β‐CD on cotton surface. Atomic force microscopy and scanning electron microscopy techniques were used for surface characterization of the treated and untreated cotton surfaces. Alteration in surface topography has been observed for β‐CD treated samples. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

β‐Cyclodextrin Improves Solubility and Enzymatic C‐Glucosylation of the Flavonoid Phloretin

Nothofagin is a prominent bioactive ingredient of rooibos tea. We recently reported its synthesis through a glucosyltransferase cascade reaction involving 3′‐C‐β‐D ‐glucosylation of the dihydrochalcone phloretin from uridine 5′‐diphosphate (UDP)‐glucose and in situ formation of UDP‐glucose from sucrose and catalytic amounts of UDP. Here we show that the limitation in process efficiency caused by the vanishingly low water solubility of phloretin – a major problem for biocatalytic modifications of hydrophobic natural products in general – was overcome effectively using phloretin inclusion complexation with β‐cyclodextrin. Unlike operating in a two‐phase system containing uncomplexed insoluble phloretin or using organic cosolvents, the addition of β‐cyclodextrin inclusion complexes was well tolerated regarding enzyme activity and stability. Besides enhancing the effective phloretin concentration in water (∼0.2 mM) to about 50 mM , inclusion complexation offered the additional advantage of overcoming the complex inhibition/inactivation effect of the free/microaggregated dihydrochalcone acceptor. Thus oversaturated phloretin solution was transformed in a single batch reaction in excellent conversion (99% in solution; 88% overall) and isolated yield (78%; 17.0 g L ⁻¹). The UDP‐glucose was regenerated up to ∼90 times and the nothofagin space‐time yield of 2.4 mM h⁻¹ presented an eight‐fold improvement compared to a reference reaction using 20% DMSO (dimethyl sulfoxide) and requiring controlled phloretin feed. We thus demonstrate the high potential of inclusion complexation by cyclodextrins for boosting the glycosylation of hydrophobic flavonoid‐like natural products.

     

Preparation of bimodal porous copolymer containing β‐cyclodextrin and its inclusion adsorption behavior

A novel insoluble bimodal porous polymer containing β‐cyclodextrin (β‐CD) was prepared to adsorb aromatic amine compound. The process involved copolymerization of styrene and methyl methacrylate with a maleic acid derivative of β‐CD, subsequently, above formed copolymer was foamed by supercritical CO₂. The chemical properties and physical structure of obtained copolymer was analyzed using Fourier transform infrared spectra, Thermal gravimetric analysis, X‐ray diffraction, scanning electron microscope, and N₂ adsorption techniques. The inclusion adsorption of aromatic amine compounds on β‐CD copolymer was carried out in a batch system. The quantities of aromatic amine compounds adsorbed on β‐CD copolymer reached equilibrium within 60 min. The adsorption kinetic could be fitted to a pseudo‐second‐order kinetic equation, and the linear correlation coefficients varied from 0.9828 to 0.9935. With the influence of molecular structure and hydrophobicity of the aromatic amine compound, the sequence of quantity of aromatic amine compounds adsorbed on β‐CD copolymer is p‐toluidine > aniline > benzidine > o‐toluidine. The adsorption equilibrium data of aromatic amine compound adsorbed on β‐CD copolymer were fitted to Freundlich and Langmuir models, respectively. The linear correlation coefficients of Langmuir model varied from 0.9516 to 0.9940, and the linear correlation coefficients of Freundlich varied from 0.9752 to 0.9976. It is concluded that Freundlich model fits better than Langmuir model, because the adsorption of aromatic amine compound on β‐CD copolymer is a chemical process. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Isothermal crystallization and melting behavior of polypropylene with lanthanum complex of cyclodextrin derivative as a β‐nucleating agent

A novel highly active β‐nucleating agent, β‐cyclodextrin complex with lanthanum (β‐CD‐MAH‐La), was introduced to isotactic polypropylene (iPP). Its influence on isothermal crystallization and melting behavior of iPP was investigated by differential scanning calorimeter (DSC), wide‐angle X‐ray diffraction (WAXD), and polarized light microscopy (PLM). WAXD results demonstrated that β‐CD‐MAH‐La was an effective β‐nucleating agent, with β‐crystal content of iPP being strongly influenced by the content of β‐CD‐MAH‐La and the isothermal crystallization temperature. The isothermal crystallization kinetics of pure iPP and iPP/β‐CD‐MAH‐La was described appropriately by Avrami equation, and results revealed that β‐CD‐MAH‐La promoted heterogeneous nucleation and accelerated the crystallization of iPP. In addition, the equilibrium melting temperature (T) of samples was determined using linear and nonlinear Hoffman‐Weeks procedure. Finally, the Lauritzen‐Hoffman secondary nucleation theory was applied to calculate the nucleation parameter (K_g) and the fold surface energy (σ_e), the value of which verify that the addition of β‐CD‐MAH‐La reduced the creation of new surface for β‐crystal and then led to faster crystallization rate. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

α‐ and β‐Stannyl Trifluoromethylbutenoates: Regioselective Preparation and Use in Copper(I)‐Catalyzed Allylation and Propargylation Reactions

The palladium‐free hydrostannylation of ethyl 4,4,4‐trifluorobutynoate 1 with tributyltin hydride at room temperature is highly regio‐ and stereoselective, providing good yields of β‐trifluoromethyl (Z)‐α‐ or (Z)‐β‐stannylacrylates 2 . Vinylstannanes 2 undergo a copper(I)‐catalyzed coupling reactions with allylic or propargylic bromides leading selectively to good yields of the corresponding allylated or propargylated products without allylic or allenic transposition.