Synthesis and characterization of exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposite via miniemulsion atom transfer radical polymerization: an activators generated by electron transfer approach

Exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposites were synthesized using activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP). Miniemulsion polymerization was used for its abundant advantages to encapsulate inorganic materials and eliminate organic solvents from products for environmentally friendly purposes. Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, which is an effective surfactant at higher temperatures, was used to stabilize the miniemulsion system. Successful miniemulsion AGET ATRP was carried out by using 4,4'‐dinonyl‐2,2'‐bipyridine (dNbPy) as a hydrophobic ligand. Formation of monodispersed droplets and particles with sizes in the range of 200nm was examined by dynamic light scattering (DLS). Conversion and molecular weight study were also carried out using gravimetry and gel permeation chromatography, respectively. By adding clay content, a decrease in the conversion and molecular weight of the nanocomposites are observed. However, an increase in the PDI values of nanocomposites was observed by the addition of nanoclay content. Thermogravimetric analysis results demonstrate that thermal stability of all the nanocomposites in comparison with the neat copolymer increases. Differential scanning calorimetry results show that T_g decreases by increasing clay content. Monodisperse distribution of spherical shape particles with sizes in the range of ∼ 200 nm was demonstrated by using scanning electron microscopy images of nanocomposite containing 1 wt% of nanoclay, which is more compiled with DLS results. Transmission electron microscopy results shows well‐dispersed exfoliated clay layers in the polymer matrix of PSMNM 1, which is coincidence with X‐ray diffraction data. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Gasoline permeation behavior and mechanical properties of polyamide 6/nanoclay,polyamide 6/PE‐g‐maleic anhydride blend,and polyamide 6/PE‐g‐maleic anhydride/clay nanocomposite

In this article, polyamide 6 (PA6)/clay nanocomposites, PA6/polyethylene grafted maleic anhydride (PE‐g‐MA) blends, and PA6/PE‐g‐MA/clay nanocomposites were prepared and their gasoline permeation behavior and some mechanical properties were investigated. In PA6/clay nanocomposites, cloisite 30B was used as nanoparticles, with weight percentages of 1, 3, and 5. The blends of PA6/PE‐g‐MA were prepared with PE‐g‐MA weight percents of 10, 20, and 30. All samples were prepared via melt mixing technique using a twin screw extruder. The results showed that the lowest gasoline permeation occurred when using 3 wt % of nanoclay in PA6/clay nanocomposites, and 10 wt % of PE‐g‐MA in PA6/PE‐g‐MA blends. Therefore, a sample of PA6/PE‐g‐MA/clay nanocomposite containing 3 wt % of nanoclay and 10 wt % of PE‐g‐MA was prepared and its gasoline permeation behavior was investigated. The results showed that the permeation amount of PA6/PE‐g‐MA/nanoclay was 0.41 g m^?2 day^?1, while this value was 0.46 g m^?2 day^?1 for both of PA6/3wt % clay nanocomposite and PA6/10 wt % PE‐g‐MA blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40150.     

Nanoclay‐encapsulated polystyrene microspheres by reverse atom transfer radical polymerization

Nanoclay‐encapsulated polystyrene microspheres were synthesized using reverse atom transfer radical polymerization in miniemulsion. Conversion and molecular weight were evaluated using gravimetry and gel permeation chromatography, respectively. Accordingly, conversion and molecular weight decrease by adding clay content. However, polydispersity index of the nanocomposites with higher clay content is higher. At high temperatures, thermal stability of the nanocomposites is relatively higher than the neat polystyrene, according to the thermogravimetric analysis results. Differential scanning calorimetry results show that glass transition temperature decreases by increasing clay content. Transmission electron microscopy result is in coincidence with X‐ray diffraction data and shows that clay layers are exfoliated in the matrix of PSNM 1. Scanning electron microscopy images display a homogeneous distribution of spherical particles with sizes in the range of ∼200 nm and also confirm dynamic light scattering (DLS) results. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis and characterization of poly(styrene‐co‐butyl acrylate)/clay nanocomposite latexes in miniemulsion by AGET ATRP

Polymer/clay nanocomposite latexes in the form of positively charged nanoparticles were synthesized by a newly developed initiating system, activators generated by electron transfer (AGET), which has been employed in atom transfer radical polymerization (ATRP). These clay‐dispersed latexes were synthesized using AGET ATRP of styrene and butyl acrylate in a miniemulsion system in which, ascorbic acid as a reducing agent was added drop wise to reduce termination reactions. Particle size and particle size distribution of resulted nanocomposite latexes were characterized by dynamic light scattering (DLS). These latexes were in the range of 138 to 171 nm in size. Gel permeation chromatography (GPC) was used to characterize the molecular weight and molecular weight distribution of the resultant copolymer nanocomposites. GPC traces showed that polymers of narrow molecular weight distribution and low Polydispersity Index (PDI) have been synthesized; this clearly shows ATRP reaction is conducted successfully. By increasing nanoclay content, molecular weight of the nanocomposites decreases. The presence of the nanofiller increases the thermal stability of the nanocomposites as investigated by thermogravimetric Analysis (TGA). Glass transition temperature of nanocomposites increases compared with the neat copolymer which was studied by differential scanning calorimetry (DSC). scanning electron microscope (SEM) showed sphere morphology of polymer particles synthesized by miniemulsion polymerization. X‐ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that mixed intercalated and exfoliated morphology is obtained. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Morphology and properties of nylon 6 and high density polyethylene blends in presence of nanoclay and PE‐g‐MA

In this study, we report the synergistic effect of nanoclay and maleic anhydride grafted polyethylene (PE‐g‐MA) on the morphology and properties of (80/20 w/w) nylon 6/high density polyethylene (HDPE) blend. Polymer blend nanocomposites containing nanoclay with and without compatibilizer (PE‐g‐MA) were prepared by melt mixing, and their morphologies and structures were examined with scanning electron microscopy (SEM) and wide angle X‐ray diffractometer (WAXD) study. The size of phase‐separated domains decreased considerably with increasing content of nanoclay and PE‐g‐MA. WAXD study and transmission electron microscopy (TEM) revealed the presence of exfoliated clay platelets in nylon 6 matrix, as well as, at the interface of the (80/20 w/w) nylon 6/HDPE blend–clay nanocomposites. Addition of PE‐g‐MA in the blend–clay nanocomposites enhanced the exfoliation of clays in nylon 6 matrix and especially at the interface. Thus, exfoliated clay platelets in nylon 6 matrix effectively restricted the coalescence of dispersed HDPE domains while PE‐g‐MA improved the adhesion between the phases at the interface. The use of compatibilizer and nanoclay in polymer blends may lead to a high performance material which combines the advantages of compatibilized polymer blends and the merits of polymer nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mechanical and thermal properties of toughened PA6/HDPE/SEBS‐g‐MA/Clay nanocomposite

Preparation and morphology of Polyamide 6 (PA6)/high density polyethylene (HDPE)/Styrene/Ethylene–Butylene/Styrene grafted with maleic anhydride (SEBS‐g‐MA)/Modified clay nanocomposites were studied. Mixing was performed using melting process in an extruder co‐rotating twin screw. After etching the materials with boiling toluene and THF at room temperature, the morphology of sample checked by scanning electron microscopy (SEM) analyses. X‐ray diffraction (XRD) used for evaluation of the effects of organo‐clay addition in the structure of nanocomposites. XRD traces showed that the characteristic (001) peak of the nanocomposites shifted to the lower degree region. XRD and SEM results showed more uniformly distribution and dispersion of HDPE in the PA6 matrix. Better sample morphology obtained, regarding less distance, and more uniformity between nanoparticles. The mechanical properties like tensile strength, impact strength, hardness and thermal properties of these toughened nanocomposites are discussed in terms of the nanoclay, SEBS‐g‐MA contents and morphology. Adding nanoclay improved hardness of nanocomposites product but reduced toughness and thermal properties. Meanwhile the presence of SEBS‐g‐MA as a compatibilizer improved toughness, thermal properties, hardness property, and the balance properties are achieved. POLYM. ENG. SCI., 55:29–33, 2015. © 2014 Society of Plastics Engineers     

Thermal degradation and crystallization behavior of blend‐based nanocomposites: Role of clay network formation

The main goal of this study is to explicate the exact role of nanoclay particles on thermal degradation mechanism and crystallization behavior of blend‐based nanocomposites. Thermoplastic olefin (TPO) nanocomposites, as a simple model, were prepared via melt mixing in an internal batch mixer. X‐ray diffractometry (XRD) and transmission electron microscopy tests show that a relatively good dispersion of silicate layers was obtained in the system. On the addition of nanoclay, a remarkable reduction in rubber domain size was observed through scanning electron microscopy (SEM). Thermogravimetric analysis shows that nanoclay particles can retard thermal decomposition process. Thermal degradation kinetic studies, using Flynn–Wall–Ozawa method, reveal that addition of nanoclay contents higher than 1 wt % changes the mechanism of thermal degradation. A mechanism was proposed to explain this phenomenon based on SEM images of char residues. Non‐isothermal crystallization behavior of samples was investigated using differential scanning calorimeter. The unexpected reduction in crystallinity of TPO nanocomposites containing 5 wt % nanoclay was explained using rheometry analysis and attributed to the formation of stable percolated clay networks in this sample. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Nonisothermal crystallization behavior of melt‐intercalated polyethylene‐clay nanocomposites

The influence of nanoclay particles on the nonisothermal crystallization behavior of intercalated polyethylene (PE) prepared by melt‐compounding was investigated. It is observed that the crystallization peak temperature (T_p) of PE/clay nanocomposites is slightly but consistently higher than the neat PE at various cooling rates. The half‐time (t_0.5) for crystallization decreased with increase in clay content, implying the nucleating role of nanoclay particles. The nonisothermal crystallization data are analyzed using the approach of Avrami (Polymer 1971, 12, 150), Ozawa (Polym Eng Sci 1997, 37, 443), and Mo and coworkers (J Res Natl Bur Stand 1956, 57, 217), and the validity of the different kinetic models to the nonisothermal crystallization process of PE/clay nanocomposites is discussed. The approach developed by Mo and coworkers successfully explains the nonisothermal crystallization behavior of PE and PE/clay nanocomposites. The activation energy for nonisothermal crystallization of neat PE and PE/clay nanocomposites is determined using the Kissinger (J Res Natl Bur Stand 1956, 57, 217) method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3809–3818, 2006     

Influence of organically modified nanoclay on the performance of pineapple leaf fiber‐reinforced polypropylene nanocomposites

Polypropylene/Pine apple leaf fiber (PP/PALF)‐reinforced nanocomposites were fabricated using melt blending technique in a twin‐screw extruder (Haake Rheocord 9000). Variation in mechanical properties, crystallization behavior, water absorption, and thermal stability with the addition of nanoclay in PP/PALF composites were investigated. It was observed that the tensile, flexural, and impact properties of PP increase with the increase in fiber loading from 10 to 30 wt %. Composites prepared using 30 wt % PALF and 5 wt % MA‐g‐PP exhibited optimum mechanical performance with an increase in tensile strength to 31%, flexural strength to 45% when compared with virgin PP. Addition of nanoclay results in a further increase in tensile and flexural strength of PP/PALF composites to 20 and 24.3%, which shows intercalated morphology. However, addition of nanoclay does not show any substantial increase in impact strength when compared with PP/PALF composites. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), confirming a strong influence between the fiber/nanoclay and MA‐g‐PP. Differential scanning calorimetry, thermogravimetric analysis thermograms also showed improved thermal properties when compared with the virgin matrix. TEM micrographs also showed few layers of agglomerated clay galleries along with mixed nanomorphology in the nanocomposites. Wide angle X‐ray diffraction studies indicated an increase in d‐spacing from 22.4 Å in Cloisite 20A to 40.1 Å in PP/PALF nanocomposite because of improved intercalated morphology. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)‐co‐adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)‐co‐adipate]/clay ternary nanocomposites

A series of blends based on poly(lactic acid) (PLA) and poly[(butylene succinate)‐co‐adipate] (PBSA) as well as their nanocomposites with nanoclay (PLA/PBSA/Clay ternary nanocomposites) were prepared using the twin‐screw extruder. The blends were prepared for PBSA contents ranging from 25 to 75 wt % and their corresponding nanocomposites were prepared at a single‐clay concentration. The morphology and structure of the blends and the nanocomposites were examined using field emission scanning electron microscopy, transmission electron microscopy, and X‐ray diffraction. Rheological properties (dynamic oscillatory shear measurements and elongational viscosities) of the blends, nanocomposites, and pure components were studied in detail. The strain hardening intensity of different blends and nanocomposites was compared with the behavior of the pure components. Strong strain hardening behavior was observed for blends composed of 50 wt % and higher PBSA content. However, the effect of PBSA content on the elongational viscosity was less pronounced in PLA/PBSA/Clay ternary nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber

Dynamically vulcanized thermoplastic elastomers nanocomposites (TPV nanocomposites) based on linear low density polyethylene (LLDPE)/reclaimed rubber/organoclay were prepared via one‐step melt blending process. Maleic anhydride grafted polyethylene (PE‐g‐MA) was used as a compatibilizing agent. The effects of reclaimed rubber content (10, 30, and 50 wt %), nanoclay content (3, 5, and 7 wt %), and PE‐g‐MA on the microstructure, thermal behavior, mechanical properties, and rheological behavior of the nanocomposites were studied. The TPV nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, scanning electron microscopy (SEM), differential scanning calorimeter, mechanical properties, and rheometry in small amplitude oscillatory shear. SEM photomicrographs of the etched samples showed that the elastomer particles were dispersed homogeneously throughout the polyethylene matrix and the size of rubber particles was reduced with introduction of the organoclay particles and compatibilizer. The effects of different nanoclay contents, different rubber contents, and compatibilizer on mechanical properties were investigated. Increasing the amount of nanoclay content and adding the compatibilizer result in an improvement of the tensile modulus of the TPV nanocomposite samples. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and property of raspberry‐like AS/SiO2 nanocomposite particles

Surfactant‐free poly(acrylonitrile‐co‐styrene)/silica (AS/SiO₂) nanocomposite particles was synthesized in the presence of cheap, commercially amorphous aqueous silica sol at ambient temperature. Thermogravimetric analysis (TGA) indicated silica contents ranging from 5 wt % to 29 wt %, depending on reaction conditions. Particle size distributions and morphologies were studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM), which clearly showed that most of the colloidal nanocomposites comprised approximately spherical particle with raspberry‐like morphology and relatively narrow size distributions. The optical clarity of solution‐cast nanocomposite films was assessed using UV–vis spectrometer, with high transmission being obtained over the whole visible spectrum. Differential scanning calorimetry (DSC) studies showed that the glass transition temperature of AS/SiO₂ nanocomposites can be higher than the corresponding pure AS, resulting from the hydrophilicity of the nanometer silica. The robustness and simplicity of this method may make large‐scale manufacture of this nanocomposite possible. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 415–421, 2007     

Morphology and chain mobility of reactive blend nanocomposites of PP‐EVA/Clay

Polypropylene (PP)‐ethylene vinyl acetate (EVA)/clay nanocomposites were prepared via reactive blending using dicumyl peroxide (DCP) as an initiator with the goal of enhancing the interaction between both phases and modified nanoclay. The effect of the reactive blending and clay incorporation strategies (direct and masterbatch) on the blend and nanostructure morphology, and chain mobility of nanocomposites were studied. The chemical analysis showed the chemical bonding of PP‐EVA, which helped to enhance the interaction in the nanocomposites. The nanocomposites obtained from the direct clay strategy presented a co‐continuous morphology of bordering intercalated and agglomerated nanoclay sheets, while the nanocomposites obtained from the masterbatch strategy showed that blend morphology change from droplet to co‐continuous with the increase of EVA concentration, with intercalated/exfoliated nanoclay sheets located in the EVA domains and at the interface. The dynamic mechanical and creep‐recovery results showed different behavior for the both strategies in terms of chain mobility and relaxation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40897.     

Synthesis and characterization of polyethylene‐octene elastomer/clay/biodegradable starch nanocomposites

The aim of this work is the production of new nanocomposites from metallocene polyethylene‐octene elastomer (POE), montmorillonite and biodegradable starch by means of a melt blending method. Characterizations of clay, modified clay, POE, POE‐g‐AA, and the hybrids produced from polymer, clay, and/or starch were performed by X‐ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectrophotometer, differential scanning calorimetry (DSC), thermogravimetry analyzer (TGA), scanning electron microscope (SEM), and Instron mechanical tester. As to the results, organophilic clay can be well dispersed into acrylic acid grafted polyethylene‐octene elastomer (POE‐g‐AA) in nanoscale sizes since cetyl pyridium chloride is partially compatible with POE‐g‐AA and allows POE‐g‐AA chains to intercalate into clay layers. Based on consideration of thermal and mechanical properties, it is also found that 12 wt % of clay content is optimal for preparation of POE‐g‐AA/clay nanocomposites. The new partly biodegradable POE‐g‐AA/clay/starch hybrid could obviously improve the elongation and the tensile strength at break of the POE‐g‐AA/starch hybrid since the former can give the smaller starch phase size and nanoscale dispersion of silicate layers in the polymer matrix. The nanocomposites produced from our laboratory can provide a stable tensile strength at break when the starch content is up to 40 wt %. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 397–404, 2005     

Preparation of thermoplastic elastomer nanocomposites based on polyamide‐6/polyepichlorohydrin‐co‐ethylene oxide

This work is aimed at determining the effect of nanoclay and polyepichlorohydrin‐co‐ethylene oxide (ECO) content on the microstructure and mechanical properties of PA6/ECO thermoplastic elastomers (TPEs). TPE nanocomposites were prepared in a laboratory mixer using polyamide 6 (PA6), ECO, and an organoclay by a two‐step melt mixing process. First, the PA6 was melt blended with Cloisite 30B and then mixed by ECO rubber. X‐ray diffraction results and transmission electron microscopy image showed that the nanoclay platelets were nearly exfoliated in both the phases. The SEM photomicrograph of PA6 with ECO showed that the elastomer particles are dispersed throughout the polyamide matrix and the size of rubber particles is less than 3 μm. Introduction of organoclay in the PA6 matrix increased the size of dispersed rubber particles in comparison with the unfilled but otherwise similar blends. The nanoscale dimension of the dispersed clay results in an improvement of the tensile modulus of the nanocomposites. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Starch‐based nanocomposites by reactive extrusion processing

Nanocomposites with unique material properties have been prepared from synthetic plastics and nanosilicates (nanoclay) until now, but not from biopolymers such as starch. The primary challenge in making biopolymeric nanocomposites is to achieve strong adhesion between nanoclay and polymer matrix. For the first time nanocomposites with superior properties have been successfully made from starch‐polycaprolactone (PCL) blends in the presence of montmorillonite (MMT) nanoclay. Reactive extrusion results showed that addition of a modified nanoclay at 3 % wt level increased elongation almost fourfold over that of pristine starch–PCL blends. X‐ray diffractions results showed dispersion of clay in the polymer matrix. The nanocomposites have better solvent‐resistance properties because of resistance to diffusion offered by clay platelets in the polymer matrix. Copyright © 2004 Society of Chemical Industry     

Transport Properties of Modified Montmorillonite‐Poly(ε‐caprolactone) Nanocomposites

A series of montmorillonite‐poly(ε‐caprolactone) nanocomposites were prepared according to a two‐stage procedure. In the first step Na‐type silicate clay was cation exchanged with protonated 12‐aminolauric acid. In the second step ε‐caprolactone was intercalated in the modified clay and ring‐opening polymerized. The clay content was varied regularly from 0 to 44 wt.‐%, with exfoliation of the silicate layers being detected by X‐ray diffraction in the nanocomposites dispersing up to at least 16 wt.‐% clay. Crystallization of poly(ε‐caprolactone) was not prevented in the nanocomposites, although it proceeded to a lower extent/order than in a homopolymer sample. The transport properties were investigated using water or dichloromethane as vapor permeants. In each case, a dual sorption behavior was observed as a function of the vapor activity because of the occurrence of different sorption mechanisms. The permeability of the nanocomposites to either permeant decreased with increasing clay content. In particular, the permeability behavior to water was largely dominated by the diffusion parameter.     

Emulsifier‐free miniemulsion polymerization of styrene using a cationic initiator

Polystyrene latex particles were synthesized using a method based on emulsifier‐free miniemulsion polymerization under ultrasonic irradiation in the presence of 2,2′ azobis (2‐amidinopropane) dihydrochloride (V‐50) as a cationic ionizable water‐soluble initiator and cetyl alcohol as costabilizer. The optimized conditions were obtained by using various parameters, such as the amounts of monomer and initiator, and the time and power of ultrasonic irradiation. In optimal conditions, the latex particles appeared to be about 250 nm in diameter through scanning electron microscopy (SEM). The SEM and gel permeation chromatography (GPC) analyses and monomer conversions of emulsifier‐free miniemulsion polymerization were compared with those of conventional emulsifier‐free emulsion polymerization using V‐50 as initiator in both cases. The results showed that in the miniemulsion polymerization, the rate of polymerization (Rp) was significantly higher, and latex particles were significantly smaller than those in the conventional emulsion polymerization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterizations of poly(α‐naphthylamine)—Nanocomposites

Poly(α‐naphthylamine) (PNA)—natural clay nanocomposites were prepared by in situ polymerization method through oxidative initiation method. Effect of nanoclay on the rate of polymerization (R_p) of Naphthylamine (NA), thermal stability of PNA, and conductivity of PNA were tested. Effect of nanoclay on the morphology of PNA was also tested. The TGA results inferred that the % weight residue remain above 700°C was increased with the increase of amount of clay. XRD results confirmed the intercalation of PNA into the basal spacing of natural clay. TEM showed the presence of nanosized particle in the PNA‐natural clay nanocomposites. The conductivity value of polymer‐nanocomposite has increased with the increase of amount of natural clay. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Fracture properties of nanoclay‐filled polypropylene

Maleic anhydride‐modified polypropylene was compounded with commercially available surface‐modified montmorillonite in a twin‐screw extruder. Recompounding ensured the removal of visible tactoids from the extrudate but TEM and XRD techniques showed nonuniform dispersion of clay platelets. In this study, we investigated the mechanical and fracture properties of nanoclay‐filled polypropylene. Emphasis was placed on the fracture characterization of the clay‐filled polypropylene. Tensile strength and stiffness increased steadily with an increase in the clay loading. The toughness of compounded materials was characterized using rigorous fracture mechanics. J‐integral fracture resistance decreased with an increase in the clay content. The resistance against stable crack growth was compared using the slopes derived from the J–R curve and the tearing modulus concept. A significant amount of crack growth resistance was evident in the nanoclay‐filled polypropylene as opposed to other brittle nanocomposites such as the nylon–clay systems. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3298–3305, 2003