Reactive Spinning of Cyanate Ester Fibers Reinforced with Aligned Amino‐Functionalized Single Wall Carbon Nanotubes

We report a new approach of reactive spinning to fabricate thermosetting cyanate ester micro‐scale diameter fibers with aligned single walled carbon nanotubes (SWNTs). The composite fibers were produced by first dispersing the SWNTs (1 wt %) in cyanate ester (CE) via solvent blending, followed by pre‐polymerization, spinning and then multiple‐stage curing. The pre‐polymerization, spinning and post‐spinning cure temperatures were carefully controlled to achieve good spun crosslinked fibers. Both pristine and amino‐functionalized SWNTs were used for the reinforced fiber spinning. Amino‐functionalized SWNTs (f‐SWNTs) were prepared by reacting acid‐treated SWNTs with toluene 2,4‐diisocyanate and then ethylenediamine (EDA). FTIR, optical microscopy and scanning electron microscopy (SEM) showed that the amino‐functionalized SWNTs were covalently and uniformly dispersed into the cyanate ester matrix and aligned along the fiber axis. The alignment was further confirmed using polarized Raman spectroscopy. The composite fibers with aligned amino‐functionalized SWNTs possess improved tensile properties with respect to neat CE fibers, showing 85, 140, and 420% increase in tensile strength, elongation and stress‐strain curve area (i.e., toughness), respectively. NH₂‐functionalization of SWNTs improves their dispersibility, alignment and interfacial strength and hence tensile properties of composite spun fibers. Fiber spinning to align SWNTs using thermosetting resin is novel. Others have reported fiber spinning to align SWNTs in thermoplastics. However, thermosetting CE resins offer the advantages of low and controllable viscosity during spinning and reactivity with amino functional groups to enable f‐SWNT/CE covalent bonding.     

Effect of Nanotube Functionalization on the Coefficient of Thermal Expansion of Nanocomposites

Single‐walled carbon nanotubes (SWNTs) are functionalized through both covalent and noncovalent bonding approaches to enhance dispersion and interfacial bonding. The coefficient of thermal expansion (CTE) of the functionalized‐SWNT‐reinforced epoxy composites are measured with a thermal mechanical analyzer (TMA). Experimental results indicate that changes of the glass‐transition temperature (T_g) in functionalized SWNT–polymer composites are dependent upon the functionalization methods. The CTE below the glass‐transition temperature of nanocomposites with a 1 wt % loading of nanotubes is substantially diminished compared to a neat polymer. A reduction in the CTE of up to 52 % is observed for nanocomposites using functionalized nanotubes. However, the CTE above the T_g significantly increases because of the contribution from phonon mode and Brownian motions of a large number of SWNTs in resin‐crosslinked networks, but the increments are compromised by possible interfacial confinement. A tunable CTE induced through nanotube functionalization has application potentials for high‐performance composites, intelligent materials, and circuit protections.     

Reinforcing Epoxy Polymer Composites Through Covalent Integration of Functionalized Nanotubes

Strong interfacial bonding and homogenous dispersion have been found to be necessary conditions to take full advantage of the extraordinary properties of nanotubes for reinforcement of composites. We have developed a fully integrated nanotube composite material through the use of functionalized single‐walled carbon nanotubes (SWNTs). The functionalization was performed via the reaction of terminal diamines with alkylcarboxyl groups attached to the SWNTs in the course of a dicarboxylic acid acyl peroxide treatment. Nanotube‐reinforced epoxy polymer composites were prepared by dissolving the functionalized SWNTs in organic solvent followed by mixing with epoxy resin and curing agent. In this hybrid material system, nanotubes are covalently integrated into the epoxy matrix and become part of the crosslinked structure rather than just a separate component. Results demonstrated dramatic enhancement in the mechanical properties of an epoxy polymer material, for example, 30–70 % increase in ultimate strength and modulus with the addition of only small quantities (1–4 wt.‐%) of functionalized SWNTs. The nanotube‐reinforced epoxy composites also exhibited an increased strain to failure, which suggests higher toughness.     

Selective Electrochemical Etching of Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) are a promising material for future nanotechnology. However, their applications are still limited in success because of the co‐existence of metallic SWNTs and semiconducting SWNTs produced samples. Here, electrochemical etching, which shows both diameter and electrical selectivity, is demonstrated to remove SWNTs. With the aid of a back‐gate electric field, selective removal of metallic SWNTs is realized, resulting in high‐performance SWNT field‐effect transistors with pure semiconducting SWNT channels. Moreover, electrochemical etching is realized on a selective area. These findings would be valuable for research and the application of SWNTs in electrochemistry and in electronic devices.     

N‐Type Conjugated Polymer‐Enabled Selective Dispersion of Semiconducting Carbon Nanotubes for Flexible CMOS‐Like Circuits

Sorting of semiconducting single‐walled carbon nanotubes (SWNTs) by conjugated polymers has attracted considerable attention recently because of its simplicity, high selectivity, and high yield. However, up to now, all the conjugated polymers used for SWNT sorting are electron‐donating (p‐type). Here, a high‐mobility electron‐accepting (n‐type) polymer poly([N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)) (P(NDI2OD‐T2)) is utilized for the sorting of high‐purity semiconducting SWNTs, as characterized by Raman spectroscopy, dielectric force spectroscopy and transistor measurements. In addition, the SWNTs sorted by P(NDI2OD‐T2) have larger diameters than poly(3‐dodecylthiophene) (P3DDT)‐sorted SWNTs. Molecular dynamics simulations in explicit toluene demonstrate distinct linear or helical wrapping geometry between P(NDI2OD‐T2) and different types of SWNTs, likely as a result of the strong interactions between the large aromatic core of the P(NDI2OD‐T2) backbone and the hexagon path of SWNTs. By using high‐mobility n‐type P(NDI2OD‐T2) as the sorting polymer, ambipolar SWNT transistors with better electron transport than that attained by P3DDT‐sorted SWNTs are achieved. As a result, flexible negated AND and negated OR logic circuits from the same set of ambipolar transistors are fabricated, without the need for doping. The use of n‐type polymers for sorting semiconducting SWNTs and achieving ambipolar SWNT transistor characteristics greatly simplifies the fabrication of flexible complementary metal‐oxide‐semiconductor‐like SWNT logic circuits.     

Highly Conductive Redox Protein–Carbon Nanotube Complex for Biosensing Applications

The integration of redox proteins with nanomaterials has attracted much interest in the past years, and metallic single‐walled carbon nanotubes (SWNTs) have been introduced as efficient electrical wires to connect biomolecules to metal electrodes in advanced nano‐biodevices. Besides preserving biofunctionality, the protein–nanotube connection should ensure appropriate molecular orientation, flexibility, and efficient, reproducible electrical conduction. In this respect, yeast cytochrome c redox proteins are connected to gold electrodes through lying‐down functionalized metallic SWNTs. Immobilization of cytochromes to nanotubes is obtained via covalent bonding between the exposed protein thiols and maleimide‐terminated functional chains attached to the carbon nanotubes. A single‐molecule study performed by combining scanning probe nanoscopies ascertains that the protein topological properties are preserved upon binding and provides unprecedented current images of single proteins bound to carbon nanotubes that allow a detailed I–V characterization. Collectively, the results point out that the use as linkers of suitably functionalized metallic SWNTs results in an electrical communication between redox proteins and gold electrodes more efficient and reproducible than for proteins directly connected with metal surfaces.     

Protamine Functionalized Single‐Walled Carbon Nanotubes for Stem Cell Labeling and In Vivo Raman/Magnetic Resonance/Photoacoustic Triple‐Modal Imaging

Stem cells have shown great potential in regenerative medicine and attracted tremendous interests in recent years. Sensitive and reliable methods for stem cell labeling and in vivo tracking are thus urgently needed. Here, a novel approach to label human mesenchymal stem cells (hMSCs) with single‐walled carbon nanotubes (SWNTs) for in vivo tracking by triple‐modal imaging is presented. It is shown that polyethylene glycol (PEG) functionalized SWNTs conjugated with protamine (SWNT‐PEG‐PRO) exhibit extremely efficient cell entry into hMSCs, without affecting their proliferation and differentiation. The strong inherent resonance Raman scattering of SWNTs is used for in vitro and in vivo Raman imaging of SWNT‐PEG‐PRO‐labeled hMSCs, enabling ultrasensitive in vivo detection of as few as 500 stem cells administrated into mice. On the other hand, the metallic catalyst nanoparticles attached on nanotubes can be utilized as the T2‐contrast agent in magnetic resonance (MR) imaging of SWNT‐labeled hMSCs. Moreover, in vivo photoacoustic imaging of hMSCs in mice is also demonstrated. The work reveals that SWNTs with appropriate surface functionalization have the potential to serve as multifunctional nanoprobes for stem cell labeling and multi‐modal in vivo tracking.     

Interactions Between Amino Acid‐Tagged Naphthalenediimide and Single Walled Carbon Nanotubes for the Design and Construction of New Bioimaging Probes

A new synthetic route to functionalized single walled carbon nanotubes (SWNTs) via supramolecular interactions using a specifically designed naphthalenediimide (NDI) nanoreceptor is demonstrated. The tendency of the NDI to spontaneously form composites with carbon nanomaterials leads to fluorescent amino acid tagged SWNTs, which are dispersible in widely accessible organic solvents (CHCl₃, DMSO) as well as in biocompatible cell medium (EMEM, Eagle's modified essential medium). The X‐ray crystal structure of the first iodine‐tagged and amino acid‐functionalized NDI molecule, designed especially to facilitate the high resolution transmission electron microscopy (HR TEM) imaging whilst retaining its ability to self‐assemble into a nanodimensional receptor in weakly polar solvents, is also described. A new hybrid material, NDI@SWNT, was prepared and characterized as dispersed in organic solvents and aqueous media and in the solid state by HR TEM, tapping mode atomic force microscopy (TM AFM), scanning electron microscopy (SEM), circular dichroism, Raman and fluorescence spectroscopies (steady‐state single and two‐photon techniques). Combined microscopy techniques, density functional theory (DFT) calculations using the Spanish Initiative for Electronic Simulations with Thousands of Atoms (SIESTA) program and spectroscopic measurements in solution indicate that amino acid‐functionalized NDI interacts strongly with SWNTs and forms a donor‐acceptor complex. Density functional theory (DFT) calculations predicted the geometry and the binding energies of an NDI molecule loaded onto a SWNT strand and the possibility of charge transfer interactions within the hybrid. The NDI@SWNT composite translocates into cells (e.g. FEK‐4, HeLa, MCF‐7) as an intact object and localizes in the cells' cytoplasm and partially in the nucleus. The NDI coating enhances the biocompatibility of SWNTs and mediates its intracellular localization as shown by confocal fluorescence imaging and fluorescence lifetime imaging (FLIM) techniques. The excited state fluorescence lifetime of the probes in cells versus solution phase indicates that the probes remain unaffected by the change in their chemical environment within the experimental timescale (2 h).     

A Versatile,Molecular Engineering Approach to Simultaneously Enhanced,Multifunctional Carbon‐Nanotube– Polymer Composites

Single‐walled carbon nanotubes (SWNTs) are recognized as the ultimate carbon fibers for high‐performance, multifunctional composites. The remarkable multifunctional properties of pristine SWNTs have proven, however, difficult to harness simultaneously in polymer composites, a problem that arises largely because of the smooth surface of the carbon nanotubes (i.e., sidewalls), which is incompatible with most solvents and polymers, and leads to a poor dispersion of SWNTs in polymer matrices, and weak SWNT–polymer adhesion. Although covalently functionalized carbon nanotubes are excellent reinforcements for mechanically strong composites, they are usually less attractive fillers for multifunctional composites, because the covalent functionalization of nanotube sidewalls can considerably alter, or even destroy, the nanotubes' desirable intrinsic properties. We report for the first time that the molecular engineering of the interface between non‐covalently functionalized SWNTs and the surrounding polymer matrix is crucial for achieving the dramatic and simultaneous enhancement in mechanical and electrical properties of SWNT–polymer composites. We demonstrate that the molecularly designed interface of SWNT–matrix polymer leads to multifunctional SWNT–polymer composite films stronger than pure aluminum, but with only half the density of aluminum, while concurrently providing electroconductivity and room‐temperature solution processability.     

Bandgap Engineering in OH‐Functionalized Silicon Nanocrystals: Interplay between Surface Functionalization and Quantum Confinement

In this work, a systematic first‐principles study of the quasi‐band structure of silicon nanocrystals (Si‐NCs) is provided, focusing on bandgap engineering by combining quantum confinement of the electronic states with OH surface‐functionalization. A mapping between the bandgap, Si‐NC diameter, and the degree of hydroxide coverage is provided, which can be used as a guideline for bandgap engineering. Complementary to first‐principles calculations, the photoluminescence (PL) wavelength of Si‐NCs in the quantum‐confinement regime is measured with well‐defined diameters between 1 and 4 nm. The Si‐NCs are prepared by means of a microplasma technique, which allows a surfactant‐free engineering of the Si‐NCs surface with OH groups. The microplasma treatment technique allows us to gradually change the degree of OH coverage, enabling us, in turn, to gradually shift the emitted light in the PL spectra by up to 100 nm to longer wavelengths. The first‐principles calculations are consistent with the experimentally observed dependence of the wavelengths on the OH coverage and show that the PL redshift is determined by the charge transfer between the Si‐NC and the functional groups, while on the other hand surface strain plays only a minor part.     

掺杂单壁碳纳米管的电流特性

依据Boltzmann方程及单壁碳纳米管(SWNTs)能量色散关系,对单个掺杂SWNTs(金属型和半导体型)所加偏压、掺杂浓度及管口直径影响输运电流的性质进行数值计算.分析表明,掺杂SWNs中的电流随偏压变化呈现跃变结构;管口直径、掺杂后Fermi能级附近的态密度以及各通道输运电子的能力直接决定电流的特性,如电流强度、跃变间隔及跃变幅度;同时电流的特性也与温度有关.     

Preparation of Highly Ordered Nitrogen‐Containing Mesoporous Carbon from a Gelatin Biomolecule and its Excellent Sensing of Acetic Acid

Novel nitrogen‐containing mesoporous carbon with well‐ordered pores (NMC‐G) and high basicity is synthesized using a low‐cost single‐molecule precursor, gelatin biomolecule, and SBA‐15 as a template via nanocasting method. The obtained materials are thoroughly characterized. It is found that the prepared materials have excellent textural properties such as high specific surface areas, huge pore volumes, and large pore diameters. The pore diameter of the materials can also be controlled with a simple adjustment of the pore diameter of the hard templates. The C/N ratio of the samples is calculated to be ≈6.01, which is slightly higher than that observed for mesoporous carbon nitride samples. X‐ray photoelectron spectroscopy (XPS) reveals the presence of sp² hybridized carbon in aromatic ring structure attached to amino groups. The materials could adsorb a huge quantity of CO₂. The sensing capability of the materials with different pore diameters for different adsorbates including ethanol, acetic acid, aniline, toluene, and ammonia is also investigated. Among the materials with different pore diameters studied, the material with the highest basicity and the largest pore diameter (NMC‐G‐150) showed excellent sensing performance with a high selectivity of adsorption for acetic acid molecule.     

Efficient Isolation and Solubilization of Pristine Single‐Walled Nanotubes in Bile Salt Micelles

We have investigated a wide variety of surfactants for their efficiency in dissolving isolated single‐walled carbon nanotubes (SWNTs) in water. In doing so, we have completely avoided the harsh chemical or mechanical conditions, such as acid or ultrasonic treatments, that are known to damage SWNTs. Bile salts in particular are found to be exceptionally effective in dissolving individual tubes, as evidenced by highly resolved optical absorption spectra, bright bandgap fluorescence, and the unprecedented resolution (～ 2.5 cm^–1) of the radial breathing modes in Raman spectra. This is attributed to the formation of very regular and stable micelles around the nanotubes providing an unusually homogeneous environment. Quantitative information concerning the degree of solubilization is obtained from absorption spectroscopy.     

Polarization‐Sensitive Single‐Wall Carbon Nanotubes All‐in‐One Photodetecting and Emitting Device Working at 1.55 µm

Functional and easy‐to‐integrate nanodevices operating in the telecom wavelength ranges are highly desirable. Indeed, the pursuit for faster, cheaper, and smaller transceivers for datacom applications is fueling the interest in alternative materials to develop the next generation of photonic devices. In this context, single wall carbon nanotubes (SWNTs) have demonstrated outstanding electrical and optical properties that make them an ideal material for the realization of ultracompact optoelectronic devices. Still, the mixture in chirality of as‐synthesized SWNTs and the necessity of precise positioning of SWNT‐based devices hinder the development of practical devices. Here, the realization of operational devices obtained using liquid solution‐based techniques is reported, which allow high‐purity sorting and localized deposition of aligned semiconducting SWNTs (s‐SWNTs). More specifically, devices are demonstrated by combining a polymer assisted extraction method, which enables a very effective selection of s‐SWNTs with a diameter of about 1–1.2 nm, with dielectrophoresis, which localizes the deposition onto silicon wafers in aligned arrays in‐between prepatterned electrodes. Thus, long semiconducting nanotubes directly contact the electrodes and, when asymmetric contacts (i.e., source and drain made of different metals) are used, each device can operate both as photoemitter and as photodetector in the telecom band around 1.55 µm in air at room temperature.     

Degradable Conjugated Polymers: Synthesis and Applications in Enrichment of Semiconducting Single‐Walled Carbon Nanotubes

Polymers which enrich semiconducting single‐walled carbon nanotubes (SWNTs) and are also removable after enrichment are highly desirable for achieving high‐performance field‐effect transistors (FETs). We have designed and synthesized a new class of alternating copolymers containing main‐chain fluorene and hydrofluoric acid (HF) degradable disilane for sorting and preferentially suspending semiconducting nanotube species. The results of optical absorbance, photoluminescence emission, and resonant Raman scattering show that poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐co‐1,1,2,2‐tetramethyl‐disilane] preferentially suspends semiconducting nanotubes with larger chiral angle (25°–28°) and larger diameter (1.03 nm–1.17 nm) (specifically (8,7), (9,7) and (9,8) species) present in HiPCO nanotube samples. Computer simulation shows that P1 preferentially interacts with (8,7) (semiconducting) over (7,7) (metallic) species, confirming that P1 selects larger diameter, larger chiral angle semiconducting tubes. P1 wrapped on the surface of SWNTs is easily washed off through degradation of the disilane bond of the alternating polymer main chain in HF, yielding “clean” purified SWNTs. We have applied the semiconducting species enriched SWNTs to prepare solution‐processed FET devices with random nanotube network active channels. The devices exhibit stable p‐type semiconductor behavior in air with very promising characteristics. The on/off current ratio reaches up to 15 000, with on‐current level of around 10 μA and estimated hole mobility of 5.2 cm² V^?1 s^?1.     

Tuning the Bandgap Character of Quantum‐Confined Si–Sn Alloyed Nanocrystals

Nanocrystals in the regime between molecules and bulk give rise to unique electronic properties. Here, a thorough study focusing on quantum‐confined nanocrystals (NCs) is provided. At the level of density functional theory an approximate (quasi) band structure which addresses both the molecular and bulk aspects of finite‐sized NCs is calculated. In particular, how band‐like features emerge with increasing particle diameter is shown. The quasiband structure is used to discuss technological‐relevant direct bandgap NCs. It is found that ultrasmall Sn NCs have a direct bandgap in their at‐nanoscale‐stable α‐phase and for high enough Sn concentration (≈41%) alloyed Si–Sn NCs transition from indirect to direct bandgap semiconductors. The calculations strongly support recent experiments suggesting a direct bandgap for these systems. For a quantitative comparison many‐body GW + Bethe–Salpeter equation (BSE) calculations are performed. The predicted optical gaps are close to the experimental data and the calculated absorbance spectra compare well with the corresponding measurements.     

Gold Functionalized Mesoporous Silica Nanoparticle Mediated Protein and DNA Codelivery to Plant Cells Via the Biolistic Method

The synthesis and characterization of a gold nanoparticle functionalized mesoporous silica nanoparticle (Au‐MSN) platform for codelivery of proteins and plasmid DNA to plant tissues using a biolistic particle delivery system is reported. The in vitro uptake and release profiles of fluorescently labeled bovine serum albumin (BSA) and enhanced green fluorescent protein (eGFP) are investigated. As a proof‐of‐concept demonstration, Au‐MSN with large average pore diameters (10 nm) are shown to deliver and subsequently release proteins and plasmid DNA to the same cell after passing through the plant cell wall upon bombardment. Release of fluorescent eGFP indicates the delivery of active, non‐denatured proteins to plant cells. This advance represents the first example of biolistic‐mediated codelivery of proteins and plasmid DNA to plant cells via gold‐functionalized MSN and provides a powerful tool for both fundamental and applied research of plant sciences.     

Estimating the Maximum Attainable Efficiency in Dye‐Sensitized Solar Cells

For an ideal solar cell, a maximum solar‐to‐electrical power conversion efficiency of just over 30% is achievable by harvesting UV to near IR photons up to 1.1 eV. Dye‐sensitized solar cells (DSCs) are, however, not ideal. Here, the electrical and optical losses in the dye‐sensitized system are reviewed, and the main losses in potential from the conversion of an absorbed photon at the optical bandgap of the sensitizer to the open‐circuit voltage generated by the solar cell are specifically highlighted. In the first instance, the maximum power conversion efficiency attainable as a function of optical bandgap of the sensitizer and the “loss‐in‐potential” from the optical bandgap to the open‐circuit voltage is estimated. For the best performing DSCs with current technology, the loss‐in‐potential is ～0.75 eV, which leads to a maximum power‐conversion efficiency of 13.4% with an optical bandgap of 1.48 eV (840 nm absorption onset). Means by which the loss‐in‐potential could be reduced to 0.4 eV are discussed; a maximum efficiency of 20.25% with an optical bandgap of 1.31 eV (940 nm) is possible if this is achieved.     

Interplay of Structural and Optoelectronic Properties in Formamidinium Mixed Tin–Lead Triiodide Perovskites

Mixed lead–tin triiodide perovskites are promising absorber materials for low bandgap bottom cells in all‐perovskite tandem photovoltaic devices. Key structural and electronic properties of the FAPb_1−xSn_xI₃ perovskite are presented here as a function of lead:tin content across the alloy series. Temperature‐dependent photoluminescence and optical absorption measurements are used to identify changes in the bandgap and phase transition temperature. The large bandgap bowing parameter, a crucial element for the attainment of low bandgaps in this system, is shown to depend on the structural phase, reaching a value of 0.84 eV in the low‐temperature phase and 0.73 eV at room temperature. The parabolic nature of the bowing at all temperatures is compatible with a mechanism arising from bond bending to accommodate the random placement of unevenly sized lead and tin ions. Charge‐carrier recombination dynamics are shown to fall into two regimes. Tin‐rich compositions exhibit fast, monoexponential recombination that is almost temperature‐independent, in accordance with high levels of electrical doping. Lead‐rich compositions show slower, stretched‐exponential charge‐carrier recombination that is strongly temperature‐dependent, in accordance with a multiphonon assisted process. These results highlight the importance of structure and composition for control of bandgap bowing and charge‐carrier recombination mechanisms in low bandgap absorbers for all‐perovskite tandem solar cells.     

Non-covalent functionalization of single walled carbon nanotubes with Fe-/Co-porphyrin and Co-phthalocyanine for field-effect transistor applications

This work reports the non-covalent functionalization of SWNTs with Fe-porphyrin, Co-porphyrin and Co-phthalocyanine molecules. The functionalized SWNTs were first characterized using Raman and X-ray photoelectron spectroscopies. Observations down to nanoscale resolution were also performed by atomic force microscopy, as well as scanning and transmission electron microscopies. The spectroscopic methods evidenced an electronic interaction between the metal-centered molecules and the SWNTs, ensuring the robustness of the functionalization. High resolution microscopy characterizations reveal that the porphyrin and phthalocyanine molecules are adsorbed on the surface of SWNTs. The electrical characterizations show a weak charge transfer between those grafted molecules and the SWNTs, confirming the electronic interaction between the molecules and the SWNTs. Density functional theory (DFT) supports experimental data and helps understanding the experimental results of selective interaction of metal complexes with one type of semiconducting SWNTs.