共查询到20条相似文献,搜索用时 609 毫秒
1.
采用响应面法优化设计化金线莲总黄酮超声波辅助提取工艺。以金线莲中总黄酮提取率为考察指标,根据中心组合(Box-Benhnken)试验设计原理,考察超声温度、超声时间、料液比以及乙醇浓度等影响因素对金线莲总黄酮提取效果的影响。最佳工艺为:提取温度45℃,超声时间58 min,料液比为1∶30,乙醇浓度为80%,预测总黄酮提取量为6.25 mg/g,验证实验实际提取量6.20 mg/g与之相比无显著差异。响应面分析法优化后的金线莲提取总黄酮工艺稳定可行,操作简便,提取效率高,可为金线莲总黄酮进一步的药理活性研究、制剂研制等提供基础。 相似文献
2.
3.
利用超声波辅助提取侧柏叶总黄酮,用分光光度法分析其含量。研究了乙醇浓度、超声提取时间、液料比对侧柏叶总黄酮提取的影响。在单因素实验的基础上,以侧柏叶总黄酮提取率为响应值,以乙醇浓度、超声提取时间、液料比为自变量,通过三因素三水平Box-Bohnken响应面分析法对筛选出的提取工艺进行优化。结果表明,响应面法优化得到的最佳提取工艺为:在乙醇浓度73%、提取时间42 min、液料比为80∶1 mL/g,此实验条件下重复3次验证实验得到的侧柏叶总黄酮平均提取率为2.45%,与Box-Bohnken响应面分析法模拟预测值2.47%相差较小,所建模型与采用的优化方法可靠。 相似文献
4.
5.
6.
7.
优化西兰花总黄酮超声辅助提取工艺,通过响应面分析法确定西兰花总黄酮的最佳提取工艺条件为:乙醇体积分数54%、料液比1∶23(g/mL)、超声时间53 min。通过验证实验得到优化条件下提取率平均为2.69 mg/g,普通水提为1.06 mg/g。研究优化并确认了西兰花总黄酮的最佳提取工艺条件。 相似文献
8.
为获取最佳的中药钩藤总黄酮提取条件,以提取量为响应值,在单因素实验研究的基础上,运用中心组合-响应面法考察了液固比、回流时间、乙醇浓度、提取温度及其交互作用对提取量的影响.研究结果表明,将液固比为23∶1的钩藤置于60%乙醇中并于80℃条件下提取2.0h,总黄酮提取量最高,达1.281 6 mg/g.经验证,运用响应面分析法从钩藤中优选总黄酮工艺稳定且合理可行. 相似文献
9.
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
15.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
16.
18.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
19.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献