The mechanical and thermal properties of graphitic carbon nitride (g-C3N4)-based epoxy composites

Numerous ways to reinforce epoxy resin and improve its thermomechanical properties have been attempted using organic and inorganic nanoparticles. In this paper, graphitic carbon nitride (g-C₃N₄) nanoparticles were synthesized and used to improve the mechanical properties and thermal stability of epoxy composites. The g-C₃N₄ was synthesized from cheap melamine powder using a simple one-step thermal treatment, then was used to reinforce the resin at different weight percentages (wt%). X-ray diffraction, scanning electron microscopy (SEM), and Fourier infrared spectroscopy were used to characterize the g-C₃N₄ and ensure its successful synthesis by studying the changes in its crystal structure, morphology, and chemical structure. The filler was dispersed in the resin using a combination of ultrasonication and high shear mixing. The results showed that the mechanical properties were optimum when 0.5 wt% g-C₃N₄ was used. The tensile strength and fracture toughness of the resulting epoxy composite improved by 21.8% and 77.3%, respectively. SEM was used to investigate the morphologies of cracks formed in epoxy composite specimens after the tensile testing. The SEM micrographs of the fracture surface showed a transition from a brittle to a rough morphology, signifying the enhancement in the composites' toughness. Thermogravimetric analysis showed a good improvement in degradation temperature of up to 8.86% while dynamic mechanical analysis showed that the incorporation of g-C₃N₄ did not affect the material's glass transition temperature.     

Effect of g-C3N4 nanofiller as filler on mechanical properties of multidirectional glass fiber epoxy hybrid composites

An experimental study was carried out to investigate the flexural strength of glass-fiber-reinforced (multidirectional woven glass fiber) epoxy hybrid composites filled with different proportions (1, 1.5, 2, 2.5, and 3%) of graphitic carbon nitride (g-C₃N₄) filler. g-C₃N₄ powder filled glass epoxy composites were fabricated in conventional hand lay-up method. Results showed an increase in flexural strength of g-C₃N₄ particles content by 2% and beyond which the strength decreased. With the addition of 2 wt % of g-C₃N₄ in glass-fiber-reinforced epoxy composites, the tensile strength increased by 11% and the flexural strength increased by 13%. The eroded surface of the specimen was observed under scanning electron microscope and the results are reported. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48413.     

Development and characterization of graphitic carbon nitride as nonblack filler in natural rubber composites

A new type of elastomeric composite containing natural rubber (NR) and graphitic carbon nitride (g-C₃N₄) has been successfully prepared with the reinforced property. The reinforcing effect of g-C₃N₄ in NR composites was examined by cure, mechanical, morphological, and swelling studies. Besides, epoxidized NR with 50-mol % epoxy level (ENR-50) was used as a compatibilizer to enhance the hydrophilic g-C₃N₄ filler capacity for hydrophobic NR composites. At the same filler load level, the mechanical properties of NR/g-C₃N₄ composites, such as tensile strength and tensile modulus, were consistently increased with increased ENR-50 content. To note, the ENR compatibilized composites have shown better-reinforced performance, which has been attributed to the hydrogen bonding interactions between the uncondensed amine groups in g-C₃N₄ and the polar groups in ENR. We believe that these newly prepared NR composites based on g-C₃N₄ as nonblack filler and ENR-50 as compatibilizer can find potential applications in modern day rubber research. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48136.     

Synthesis,characterization, and properties of a polyhedral oligomeric octadiphenylsulfonylsilsesquioxane

A novel polyhedral oligomeric octadiphenylsulfonylsilsesquioxane (ODPSS) was synthesized from octaphenylsilsesquioxane and benzenesulfonyl chloride via a Friedel–Crafts reaction with a high yield. ODPSS was identified by Fourier transform infrared spectroscopy, ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI–TOF MS), wide‐angle X‐ray diffraction, and elemental analysis to be a kind of polyhedral oligomeric silsesquioxane of a T₈R₈ structure. ODPSS exhibited superior thermal stability according to thermogravimetric analysis. Its initial thermal decomposition temperature (T_onset) was at 491°C in air and 515°C in nitrogen. Thermal and mechanical properties of epoxy resin (EP) composites with ODPSS added were studied by differential scanning calorimetry and tensile testing. The results show that the incorporation of ODPSS at a low loading content not only improved the glass‐transition temperature of the EP composites but also enhanced their tensile strength. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40892.     

Tailored interphase and thermal interface resistance of self-assembled thermally reduced graphene oxide–polyamide hybrid/epoxy composites with enhanced thermal conductivity

Thermally reduced graphene oxide–polyamide (TrGO-PA) hybrids were fabricated by self-assembly between TrGO nanosheets and PA microparticles, and the dispersibility, interphase extension, and thermal conduction mechanism of TrGO-PA/epoxy (EP) composites were investigated. Most of the oxygen-containing functional groups of TrGO were removed, and a conjugated structure of graphene was recovered. TrGO was distributed evenly on the PA surface via electrostatic adsorption between TrGO and PA, which resulted in the inhibition of TrGO aggregation in the epoxy matrix. Compared with that of TrGO/EP and PA/EP composites, the thermal interface resistance (R_TIM) of TrGO-PA/EP composites was greatly decreased to 38.3 mm² kW⁻¹ and the thermal conductivity was improved to 0.268 W/(m K), which was attributed to the enhanced dispersibility of TrGO-PA and the enlarged interphase in TrGO-PA/EP composites. A schematic model of thermal conduction mechanisms was proposed based on the formation of contiguous thermal transfer pathways by bridged TrGO adsorbed on well-dispersed PA microparticles in TrGO-PA/EP composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47826.     

Morphology and thermal/mechanical properties of alkyl‐imidazolium‐treated rectorite/epoxy nanocomposites

A novel organic rectorite (OREC) was prepared by treating the natural sodium‐rectorite (Na‐REC) with ionic liquid 1‐hexadecyl‐3‐methylimidazolium bromide ([C₁₆mim]Br). X‐ray diffraction (XRD) analysis showed that the interlayer spacing of the OREC was expanded from 2.23nm to 3.14nm. Furthermore, two types of OREC/epoxy nanocomposites were prepared by using epoxy resin (EP) as matrix, 2‐ethyl‐4‐methylimidazole (2‐E‐4‐MI) and tung oil anhydride (TOA) as curing agents, respectively. XRD and transmission electron microscope (TEM) analysis showed that the intercalated nanocomposite was obtained with addition of the curing agent 2‐E‐4‐MI, and the exfoliated nanocomposite was obtained with addition of the curing agent TOA when the OREC content was less than 2 wt %. For the exfoliated nanocomposite, the mechanical and thermal property tests indicated that it had the highest improvement when OREC content was 2 wt% in EP. Compared to pure EP, 60.3% improvement in tensile strength, 26.7% improvement in bending strength, 34% improvement in bending modulus, 14°C improvement in thermal decomposition temperature (T_d) and 5.7°C improvement in glass transition temperature (T_g) were achieved. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of EP‐POSS mixture and the properties of EP‐POSS/epoxy,SiO2/epoxy,and SiO2/EP‐POSS/epoxy nanocomposite

The hybrid material of EP‐POSS mixture was synthesized by the hydrolysis and condensation of (γ‐glycidoxypropyl) trimethoxysilane. A series of binary systems of EP‐POSS/epoxy blends, epoxy resin modified by silica nanoparticles (SiO₂/epoxy), and ternary system of SiO₂/EP‐POSS/epoxy nanocomposite were prepared. The dispersion of SiO₂ in the matrices was evidenced by transmission electron micrograph, and the mechanical properties, that is, flexural strength, flexural modulus, and impact strength were examined for EP‐POSS/epoxy blends, SiO₂/epoxy, and SiO₂/EP‐POSS/epoxy, respectively. The fractured surface of the impact samples was observed by scanning electron micrograph. Thermogravimetry analysis were applied to investigate the different thermal stabilities of the binary system and ternary system by introducing EP‐POSS and SiO₂ to epoxy resin. The results showed that the impact strength, flexural strength, and modulus of the SiO₂/EP‐POSS/epoxy system increased around by 57.9, 14.1, and 44.0% compared with the pure epoxy resin, T_i, T_max and the residues of the ternary system were 387°C, 426°C, and 25.2%, increased remarkably by 20°C, 11°C and 101.6% in contrast to the pure epoxy resin, which was also higher than the binary systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 810‐819, 2013     

Flame retardant and mechanical properties of epoxy composites containing APP−PSt core−shell microspheres

Ammonium polyphosphate (APP)–polystyrene (PSt) core–shell microspheres (CSPs) were synthesized via in situ radical polymerization. The core–shell structure was confirmed by transmission electron microscope (TEM). The results of optical contact angle measurements demonstrated a significant improvement in hydrophobicity of the modified APP. The obtained APP–PSt CSPs were added into epoxy (EP) system with various loadings. Effects of CSP on flame retardancy, thermal properties, heat release rate (HRR), smoke production, and mechanical properties of EP/CSP composites were investigated by limiting oxygen index (LOI), UL‐94 tests, thermogravimetric analysis (TGA), cone calorimeter, and tensile test. LOI and UL‐94 indicated that CSP remarkably improved the flame retardancy of EP composites. TGA showed that the initial decomposition temperature and the maximum‐rate decomposition temperature decreased, whereas residue yields at high temperature increased with the incorporation of microspheres. Cone calorimetry gave evidence that HRR, peak release rate, average HRR, and smoke production rate of EP/CSP composites decreased significantly. The morphology of char residues suggested that CSP could effectively promote EP to form high‐quality char layer with compact outer surface and swollen inner structure. Tensile strength of EP was enhanced with the addition of CSP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40218.     

Influence of complexing treatment and epoxy resin coating on the properties of aramid fiber reinforced natural rubber

In this work, natural rubber/aramid fiber (NR/AF) composites were prepared with master batch method. AF was modified by using epoxy resin (EP) and accelerator 2‐ethyl‐4‐methylimidazole (2E4MZ) through surface coating on the basis of the complexing treatment with CaCl₂ solution. Hydroxyl‐terminated liquid isoprene rubber (LIR) was regarded as a compatibilizer between EP and NR. It is found that the crystallinity on AF surface is decreased by complexing reaction with CaCl₂ solution. Swelling and mechanical properties of the vulcanized composites, such as swelling degree, tensile and tear strength, tensile modulus at 300% elongation, are measured, and the tensile fracture morphology and dynamic mechanical analysis of the composites are investigated. The results show that the mechanical properties of composites with modified fibers are improved obviously and interfacial adhesion between matrix and the fiber is enhanced, especially for the AF coated with EP and imidazole. The best comprehensive mechanical properties of the composites are obtained with using CaCl₂‐EP/2E4MZ system when the ratio of m(EP)/m(AF) is 3%. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42122.     

Effect of poly(etherimide) chemical structures on the properties of epoxy/poly(etherimide) blends and their carbon fiber‐reinforced composites

Poly(etherimide)s (PEIs) with different chemical structures were synthesized and characterized, which were employed to toughen epoxy resins (EP/PEI) and carbon fiber‐reinforced epoxy composites (CF/EP/PEI). Experimental results revealed that the introduction of the fluorinated groups and meta linkages could help to improve the melt processability of EP/PEI resins. The EP/PEI resins showed obviously improved mechanical properties including tensile strength of 89.2 MPa, elongation at break of 4.7% and flexural strength of 144.2 MPa, and good thermal properties including glass transition temperature (T_g) of 211°C and initial decomposition temperature (T_d) of 366°C. Moreover, CF/EP/PEI‐1 and CF/EP/PEI‐4 composites showed significantly improved toughness with impact toughness of 13.8 and 15.5 J/cm², respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and thermo mechanical properties of siloxane‐modified epoxy‐based nano composite

In this study, polymer hybrid composites were synthesized by sol‐gel process. 3‐Amino‐propyltrimethoxysilane [APTMS)/γ‐Glycidoxypropyl trimethoxy‐silane (GPTMS); (4, 4′‐Methylene‐dianiline (DDM)] and 1,4‐Bis(trimethoxysilylethyl) benzene (BTB) were added to DGEBA type epoxy resin for anticipated to exhibit excellent thermal stability. Boron trifluoride monoethylamine (BF₃MEA) was used as catalyst. The structure of nanocomposites was characterized by attenuated total reflectance (ATR) and solid‐state ²⁹Si NMR which suggest EP‐APTMS‐BTB/EP‐GPTMS‐BTB possesses T³; T¹–T⁰, and T¹ structures when the BTB content was lower than 10 wt % and higher 20 wt %, respectively. BF₃MEA was proved to be an effective catalyst for the sol‐gel reaction of APTMS, but it could not promote for GPTMS. From TEM microphotographs, EP‐APTMS‐BTB (10 wt %) possesses a dense inorganic structure (particle size around 5–15 nm) compare with the loose inorganic structure of EP‐GPTM‐/BTB (10 wt %). DSC, TGA were use to analyze the thermal properties of the nanocomposites and DMA was used to analyze the dynamic mechanical properties of hybrid composites. The T_gs of all nanocomposites decreased with the increasing BTB content. A system with BTB content lower than 10 wt % showed good dynamic mechanical property and thermal stability (Td₅ increased from 336°C to 371°C, char yield increased from 27.4 to 30.2%). The structure of inorganic network affects the Td₅ and dynamic mechanical properties of composite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40984.     

Studies on the curing behavior,thermal, and mechanical properties of epoxy resin-co-amine-functionalized lead phthalocyanine

A high performance copolymer was prepared by using epoxy (EP) resin as matrix and 3,10,17,24-tetra-aminoethoxy lead phthalocyanine (APbPc) as additive with dicyandiamide as curing agent. Fourier-transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetric analysis (DSC), and thermogravimetric analysis (TGA) were used to study the curing behavior, curing kinetics, dynamic mechanical properties, impact and tensile strength, and thermal stability of EP/APbPc blends. The experimental results show that APbPc, as a synergistic curing agent, can effectively reduce the curing temperature of epoxy resin. The curing kinetics of the copolymer was investigated by non-isothermal DSC to determine kinetic data and measurement of the activation energy. DMA, impact, and tensile strength tests proved that phthalocyanine can significantly improve the toughness and stiffness of epoxy resin. Highest values were seen on the 20 wt% loading of APbPc in the copolymers, energy storage modulus, and impact strength increased respectively 388.46 MPa and 3.6 kJ/m², T_g decreased 19.46°C. TGA curves indicated that the cured copolymers also exhibit excellent thermal properties.     

Effect of polyarylene ether nitriles on processing and mechanical behaviors of phthalonitrile‐epoxy copolymers and glass fiber laminated composites

A series of copolymers and glass fiber composites were successfully prepared from 2,2‐bis [4‐(3,4‐dicyanophenoxy) phenyl] propane (BAPh), epoxy resins E‐44 (EP), and polyarylene ether nitriles (PEN) with 4,4′‐diaminodiphenyl sulfone as curing additive. The gelation time was shortened from 25 min to 4 min when PEN content was 0 wt % and 15 wt %, respectively. PEN could accelerate the crosslinking reaction between the phthalonitrile and epoxy. The initial decomposition temperatures (T_i) of BAPh/EP copolymers and glass fiber composites were all more than 350°C in nitrogen. The T_g of 15 wt % PEN glass fiber composites increased by 21.2°C compared with that of in comparison with BAPh/EP glass fiber composite. The flexural strength of the copolymers and glass fiber composites reached 119.8 MPa and 698.5 MPa which increased by 16.6 MPa and 127.3 MPa in comparison with BAPh/EP composite, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of processing conditions on physical properties of 3‐aminophenoxyphthalonitrile/epoxy laminates

To develop high performances of polymer composite laminates, differential scanning calorimetry and dynamic rheological analysis studies were conducted to show curing behaviors of 3‐aminophenoxyphthalonitrile/epoxy resin (3‐APN/EP) matrix and define cure parameters of manufacturing processes. Glass fiber reinforced 3‐APN/EP (GF/3‐APN/EP) composite laminates were successfully prepared through different processing conditions with three parameters such as pressures, temperatures, and time. Based on flexure tests, dynamic mechanical analysis, thermal gravimetric analysis, and scanning electron microscope, the complementary catalytic effect of the three processing parameters is investigated by studying mechanical behavior, thermomechanical behavior, thermal behavior, and fracture morphology of GF/3‐APN/EP laminates. The 50/50 GF/3‐APN/EP laminates showed a significant improvement in flexural strength, glass transition temperature (T_g), and thermal stability with favorable processing parameters. It was also found that the T_g and thermal stability were significantly improved by the postheated treatment method. The effect of manufacturing process provides a new and simple route for the polymer–matrix composites application, which indicates that the composites can be manufactured at low temperatures. But, they can be used in a high temperature environment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39746.     

Promotion of the mechanical properties and thermal conductivity of epoxy by low Si3N4 whisker content and its mechanisms

Si₃N₄ whisker (Si₃N_4w) is selected as epoxy filler. The influence of filler content on the bulk density, porosity, bending strength, Young's modulus, critical stress intensity factor, work of failure, morphologies of fracture surface, and thermal conductivity of Si₃N_4w/epoxy is investigated. The bending strength is 82.63 MPa at a Si₃N_4w content of 5 vol% and increases to 25.29% more than that of neat epoxy. Compared with that of neat epoxy, the work of failure and thermal conductivity increase by 455% and 34.78% to 18 248.92 J·m⁻² and 0.31 W·m⁻¹·K⁻¹, respectively, at a Si₃N_4w content of 7 vol%. However, Si₃N_4w/epoxy becomes sensitive to precrack due to a weak C N bond and residual tensile stress at the interface, thereby resulting in the decline of critical stress intensity factor. The coexistence of various energy dissipation mechanisms, namely, steps, craters or depressions, stress whitening, plastic flow, pull out of Si₃N_4w, and rough fracture surface, is observed in Si₃N_4w/epoxy. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48721.     

Tetrafunctional epoxy as an all‐purpose modifier for homopolymerized bisphenol A diglycidyl ether

In some applications, homopolymerized epoxies, which offer better biocompatibility and lower water absorption than amine‐ and anhydride‐cured epoxy, are more preferable; however, using homopolymerized epoxy as matrix in composites still remains a challenge. Herein, homopolymerized bisphenol A diglycidyl ether curing systems with simultaneously improved tensile strength, impact strength, and glass transition temperature (T_g) were achieved by addition of small amounts of tetra‐functional epoxies (TFTEs) with different spacer lengths. Effects of spacer length in TFTE on thermal and mechanical properties were investigated. Results indicated that TFTE with the longest spacer length shows the best mechanical performance. In addition, effects of TFTE loading on thermal and mechanical properties were discussed. Compared with neat bisphenol A diglycidyl ether, addition of 5% tetraglycidyl‐1,10‐bis(triphenylmethane) decane leads to simultaneous improvements in tensile strength, impact strength, and T_g. Effects of thermal cycling on the mechanical properties were also reported. Results suggest that the modified homopolymerized epoxy shows good performances and could be used as matrix materials and possibly in some dental applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46431.     

Synthesis,thermal and mechanical behavior of a silicon/phosphorus containing epoxy resin

A liquid silicon/phosphorus containing flame retardant (DOPO–TVS) was synthesized with 9,10‐dihydro‐9‐oxa‐10‐phosphapheanthrene‐10‐oxid (DOPO) and triethoxyvinylsilane (TVS). Meanwhile, a modified epoxy resin (IPTS–EP) was prepared by grafting isocyanate propyl triethoxysilane (IPTS) to the side chain of bisphenol A epoxy resin (EP) through radical polymerization. Finally, the flame retardant (DOPO–TVS) was incorporated into the modified epoxy resin (IPTS–EP) through sol–gel reaction between the ethyoxyl of the two intermediates to obtain the silicon/phosphorus containing epoxy resin. The molecular structures of DOPO–TVS, IPTS–EP and the final modified epoxy resin were confirmed by FTIR spectra and ¹H‐NMR, ³¹P‐NMR. Thermogravimetric analysis (TGA), differential scanning calorimetry, and limiting oxygen index were conducted to explore the thermal properties and flame retardancy of the synthesized epoxy resin. The thermal behavior and flame retardancy were improved. After heating to 600°C in a tube furnace, the char residue of the modified resin containing 10 wt % DOPO–TVS displayed more stable feature compared to that of pure EP, which was observed both by visual inspection and scanning electron microscope (SEM). Moreover, the mechanical performance testing results exhibited the modified epoxy resins possessed elevated tensile properties and fracture toughness which is supported by SEM observation of the tensile fracture section. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42788.     

Thermal and mechanical properties of tetra‐functional mesogenic type epoxy resin cured with aromatic amine

A novel tetra‐functional epoxy monomer with mesogenic groups was synthesized and characterized by ¹H‐NMR and FTIR. The synthesized epoxy monomer was cured with aromatic amine to improve the thermal property of epoxy/amine cured system. The glass transition temperature (T_g) and coefficient of thermal expansion (CTE) of the cured system were investigated by dynamic mechanical analysis and thermal mechanical analysis. The properties of the cured system were compared with the conventional bisphenol‐A type epoxy and mesogenic type epoxy system. The storage modulus of the tetra‐functional mesogenic epoxy cured systems showed the value of 0.96 GPa at 250 °C, and T_g‐less behavior was clearly observed. The cured system also showed a low CTE at temperatures above 150 °C without incorporation of inorganic components. These phenomena were achieved by suppression of the thermal motion of network chains by introduction of both mesogenic groups and branched structure to increase the cross linking density. The temperature dependency of the tensile property and thermal conductivity of the cured system was also investigated. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46181.     

Novel,promising, and broadband microwave-absorbing nanocomposite based on the graphite-like carbon nitride/CuS

In this study, a broadband, intense, novel, and promising microwave-absorbing nanocomposite was prepared using graphite-like carbon nitride (g-C₃N₄)/CuS suspended in poly(methyl methacrylate) (PMMA) medium. The g-C₃N₄ nanosheets were synthesized by heating the urea as well as the CuS nanoparticles, and g-C₃N₄/CuS nanocomposites were prepared using a solvothermal method and then were separately molded by a PMMA solution to investigate their microwave-absorbing characteristics. The Fourier transform infrared and X-ray powder diffraction were used to characterize the g-C₃N₄, CuS, and CuS/g-C₃N₄ nanostructures, which confirmed that the pure structure of the nanomaterials has been synthesized. The optical properties of the nanostructures were also investigated by diffuse reflection spectroscopy analysis. Accordingly, the Kubelka–Munk theory suggested significant narrow band gap for g-C₃N₄/CuS nanocomposite (0.27 eV), facilitating electron jumping and conductive loss. The morphology of the structures was examined using field emission scanning electron microscopy micrographs, illustrating that the uniform hexagonal structures of the CuS nanoplates have been formed and the CuS two-dimensional structures were uniformly distributed on the g-C₃N₄ nanosheets. Finally, the microwave-absorbing properties of the CuS, g-C₃N₄, and g-C₃N₄/CuS were investigated by PMMA as a host. The microwave-absorbing properties were evaluated using a vector network analyzer. The results illustrated that the maximum reflection loss of the g-C₃N₄/PMMA nanocomposite was −71.05 dB at 14.90 GHz with a thickness of 2.00 mm, demonstrating a 1.70 GHz bandwidth >30 dB, as well as g-C₃N₄/CuS/PMMA nanocomposite absorbed 7.30 GHz bandwidth of more than 10 dB with a thickness of 1.80 mm along the x- and ku-band frequency. The obtained results introduced the PMMA as a capable microwave-absorbing substrate. Besides, the g-C₃N₄/CuS/PMMA nanocomposite demonstrated metamaterial property and abundant attenuation constant. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48430.     

Synergistic improvement of mechanical and thermal properties in epoxy composites via polyimide microspheres

Achieving synergetic improvements of mechanical strength, toughness, and thermal stability of epoxy resin has been a crucial but very challenging issue. Herein, to explore a new solution for circumventing this issue, polyimide microspheres were successfully prepared through the inverse nonaqueous emulsion process, and the structure, size distribution and morphologies of polyimide (PI) microspheres were comprehensively investigated. Then the PI microspheres were incorporated in epoxy resin matrix to systematically investigate the mechanical and thermal properties of obtained epoxy/PI microspheres composites. It was found that the PI microspheres can not only enhance the mechanical strength of epoxy resin, but also significantly improve the toughness. Specially, the epoxy-based composites containing 3 wt% PI microspheres exhibit a 47% increase in tensile strength, while the G_IC and Charpy impact strength increase by 106% and 200%, respectively. The toughing mechanism of epoxy/PI microspheres composites was discussed. Moreover, the PI microspheres can also endow the epoxy resin with excellent thermal stability and heat resistance. Thus, this work may open a new opportunity to synergistically enhance the mechanical and thermal properties of epoxy-based composites and may also give some valuable inspiration for the rational design of other high-performance thermosetting composites.