共查询到20条相似文献,搜索用时 15 毫秒
1.
The article explores viscoelastic and mechanical property analysis of graphene decorated with graphene quantum dots (GDGQD) reinforced epoxy composite. Tensile, nanoindentation, and nano-dynamic mechanical analysis (DMA) tests were conducted on the composite with 0 to 1 wt% filler variation (an interval of 0.25 wt% maintained). The hardness and elastic modulus for two different loading conditions under a frequency range of 10 to 250 Hz were performed. The viscoelastic properties described through loss tangent and storage modulus graphically and the various factors such as modulus and depth of penetration were influenced by force frequency and mobility of the molecular chain. The results revealed the role of GDGQDs as filler material for enhancing the nanomechanical and tensile properties of the epoxy matrix. The differences in the properties can be ascribed to the filler interfacial bonding with the polymer matrix at the molecular level. The macro-level properties like tensile properties following the same trend as that of the micro-level properties like nano-indentation and nano-DMA results. Further, with the GDGQD aspect ratio, and assuming three-dimensionally filled randomly orientation of filler, the Halpin-Tsai model was satisfied with the experimental tensile modulus values. 相似文献
2.
Mechanical and thermal properties of hierarchical composites enhanced by pristine graphene and graphene oxide nanoinclusions
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Epoxy resin nanocomposites incorporated with 0.5, 1, 2, and 4 wt % pristine graphene and modified graphene oxide (GO) nanoflakes were produced and used to fabricate carbon fiber‐reinforced and glass fiber‐reinforced composite panels via vacuum‐assisted resin transfer molding process. Mechanical and thermal properties of the composite panels—called hierarchical graphene composites—were determined according to ASTM standards. It was observed that the studied properties were improved consistently by increasing the amount of nanoinclusions. Particularly, in the presence of 4 wt % GO in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 15% (21%), 34% (84%), and 40% (68%), respectively. Likewise, with inclusion of 4 wt % pristine graphene in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 11% (7%), 30% (77%), and 34% (58%), respectively. Also, thermal conductivity of the carbon fiber (glass fiber) composites with 4% GO inclusion was improved 52% (89%). Similarly, thermal conductivity of the carbon fiber (glass fiber) composites with 4% pristine graphene inclusion was improved 45% (80%). The reported results indicate that both pristine graphene and modified GO nanoflakes are excellent options to enhance the mechanical and thermal properties of fiber‐reinforced polymeric composites and to make them viable replacement materials for metallic parts in different industries, such as wind energy, aerospace, marine, and automotive. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40826. 相似文献
3.
The aim of the present study was to investigate the physical and thermo-mechanical characterization of silicon carbide filled needle punch nonwoven jute fiber reinforced epoxy composites. The composite materials were prepared by mixing different weight percentages (0–15 wt.%) of silicon carbide in needle punch nonwoven jute fiber reinforced epoxy composites by hand-lay-up techniques. The physical and mechanical tests have been performed to find the void content, water absorption, hardness, tensile strength, impact strength, fracture toughness and thermo-mechanical properties of the silicon carbide filled jute epoxy composites. The results indicated that increase in silicon carbide filler from 0 to 15 wt.% in the jute epoxy composites increased the void content by 1.49 %, water absorption by 1.83 %, hardness by 39.47 %, tensile strength by 52.5 %, flexural strength by 48.5 %, and impact strength by 14.5 % but on the other hand, decreased the thermal conductivity by 11.62 %. The result also indicated that jute epoxy composites reinforced with 15 wt.% silicon carbide particulate filler presented the highest storage modulus and loss modulus as compared with the unfilled jute epoxy composite. 相似文献
4.
Sylwia Czonka Agn Kairyt Karolina Miedziska Anna Strkowska 《International journal of molecular sciences》2021,22(14)
In the following study, polyurethane (PUR) composites were modified with 2 wt.% of walnut shell filler modified with selected mineral compounds–perlite, montmorillonite, and halloysite. The impact of modified walnut shell fillers on selected properties of PUR composites, such as rheological properties (dynamic viscosity, foaming behavior), mechanical properties (compressive strength, flexural strength, impact strength), dynamic-mechanical behavior (glass transition temperature, storage modulus), insulation properties (thermal conductivity), thermal characteristic (temperature of thermal decomposition stages), and flame retardant properties (e.g., ignition time, limiting oxygen index, heat peak release) was investigated. Among all modified types of PUR composites, the greatest improvement was observed for PUR composites filled with walnut shell filler functionalized with halloysite. For example, on the addition of such modified walnut shell filler, the compressive strength was enhanced by ~13%, flexural strength by ~12%, and impact strength by ~14%. Due to the functionalization of walnut shell filler with thermally stable flame retardant compounds, such modified PUR composites were characterized by higher temperatures of thermal decomposition. Most importantly, PUR composites filled with flame retardant compounds exhibited improved flame resistance characteristics-in all cases, the value of peak heat release was reduced by ~12%, while the value of total smoke release was reduced by ~23%. 相似文献
5.
Polyvinyl chloride (PVC)/graphene and poly(methyl methacrylate) (PMMA)/graphene nanocomposites were made by solution casting technique with graphene weight fractions of 1, 5, 10, 15, and 20%. Multilayer structures of the composites were made by hot compression technique to study their electromagnetic interference shielding effectiveness (EMI SE). Tensile strength, hardness, and storage modulus of the nanocomposites were studied in relation with graphene weight fraction. There has been a substantial increase in the electrical conductivity and EMI SE of the composites with 15–20% filler loading. Differential thermal analysis of the composites shows improved thermal stability with an increase in graphene loading. PMMA/graphene composites have better thermal stability, whereas PVC/graphene composites have superior mechanical properties. About 2 mm thick multilayer structures of PMMA/graphene and PVC/graphene composites show a maximum EMI SE of 21 dB and 31 dB, respectively, in the X band at 20 wt % graphene loading. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47792. 相似文献
6.
许文娇;陆书玉;罗丽娟 《中国塑料》2010,24(11):89-93
用废弃环氧模塑料粉作为填料,采用模压成型的方法制备了聚氯乙烯(PVC)/废弃环氧模塑料复合材料,研究了废弃环氧模塑料粉的组成和性质及其与PVC的界面黏结情况,分别考察了温度和废弃环氧模塑料粉含量对复合材料力学性能和动态力学性能的影响。结果表明,废弃环氧模塑料粉具有一定的活性,能与极性树脂PVC发生作用而产生界面接枝;在模压温度为200 ℃,废弃环氧模塑料粉含量为60 %(质量分数,下同)时,复合材料的拉伸强度为32.13 MPa,弯曲强度和冲击强度分别为60.70 MPa和4.68 kJ/m2,基本可满足相关产品的要求;随着废弃环氧模塑料粉含量的增加,复合材料的储能模量提高,损耗峰向高温方向移动,且损耗峰形先变宽后变窄。 相似文献
7.
《Carbon》2013
The effect of dispersion state of graphene on mechanical properties of graphene/epoxy composites was investigated. The graphene sheets were exfoliated from graphite oxide (GO) via thermal reduction (thermally reduced GO, RGO). Different dispersions of RGO sheets were prepared with and without ball mill mixing. It was found that the composites with highly dispersed RGO showed higher glass transition temperature (Tg) and strength than those with poorly dispersed RGO, although no significant differences in both the tensile and flexural moduli are caused by the different dispersion levels. In particular, the Tg was increased by nearly 11 °C with the addition of 0.2 wt.% well dispersed RGO to epoxy. As expected, the highly dispersed RGO also produced one or two orders of magnitude higher electrical conductivity than the corresponding poorly dispersed RGO. Furthermore, an improved quasi-static fracture toughness (KIC) was measured in the case of good dispersion. The poorly and highly dispersed RGO at 0.2 wt.% loading resulted in about 24% and 52% improvement in KIC of cured epoxy thermosets, respectively. RGO sheets were observed to bridge the micro-crack and debond/delaminate during fracture process due to the poor filler/matrix and filler/filler interface, which should be the key elements of the toughening effect. 相似文献
8.
Sylwia Czonka Agn Kairyt Karolina Miedziska Anna Strkowska Agnieszka Adamus-Wodarczyk 《International journal of molecular sciences》2021,22(7)
Rigid polyurethane (PUR) foams reinforced with 1, 2, and 5 wt.% of salvia filler (SO filler) and montmorillonite-modified salvia filler (MMT-modified SO filler) were produced in the following study. The impact of 1, 2, and 5 wt.% of SO filler and MMT-modified SO filler on the morphological, chemical, and mechanical properties of PUR composites were examined. In both cases, the addition of 1 and 2 wt.% of SO fillers resulted in the synthesis of PUR composites with improved physicomechanical properties, while the addition of 5 wt.% of SO fillers resulted in the formation of PUR composites with a less uniform structure and, therefore, some deterioration in their physicomechanical performances. Moreover, the results showed that the modification of SO filler with MMT improved the interphase compatibility between filler surface and PUR matrix. Therefore, such reinforced PUR composites were characterized by a well-developed closed-cell structure and improved mechanical, thermal, and flame-retardant performances. For example, when compared with reference foam, the addition of 2 wt.% of MMT-modified SO filler resulted in the formation of PUR composites with greater mechanical properties (compressive strength, flexural strength) and improved dynamic-mechanical properties (storage modulus). The PUR composites were characterized by better thermal stability as well as improved flame retardancy—e.g., decreased peak rate of heat release (pHRR), reduced total smoke release (TSR), and increased limiting oxygen index (LOI). 相似文献
9.
In this study, aminopropyl trimethoxysilane as an interfacial modifier was introduced on the surface of graphene (Gr) nanoplatelets. The effects of the silane-modified graphene (SGr) loading (0, 0.05, 0.1, 0.3, and 0.5 wt %) and silane modification on the tensile, compressive, interlaminar shear stress (ILSS), and tribological properties of the epoxy-based nanocomposites were investigated. Out of these specimens, the highest values of ILSS and compressive strength were related to the 0.3 wt % SGr–epoxy nanocomposite. The addition of SGr enhanced the tensile strength and strain to failure only at low contents (i.e., 0.05 wt %). Also, the tensile and compressive moduli were improved, and the highest values were observed at a 0.5 wt % SGr loading. In addition, decreases of approximately 40 and 68% in the coefficient of friction and wear rate, respectively, were observed at a 0.3 wt % SGr loading. Enhanced tensile, compressive, ILSS, and wear properties in the SGr–epoxy specimens were observed compared to those in the Gr–epoxy specimens. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47410. 相似文献
10.
Yanwen Zhao Qing Meng Qian Zhang Fan Wang Qin Wang Yuexin Wang 《Polymer Engineering and Science》2019,59(5):982-988
Oil‐impregnated monomer casting (OMC) nylon composites reinforced by graphene oxide and Lanthanum(III) chloride (LaCl3) were prepared by anionic ring‐opening polymerization in the presence of sodium hydroxide catalyst and toluene‐2, 4‐diisocyanate cocatalyst. The cross‐linked GO was formed by the coordination and electrostatic interactions between La3+ and the carboxyl on the edge of GO, which resulted in an obvious reinforcement for the OMC nylon composites. The effects of different rare earth contents on mechanical and tribological properties of the composites were carried out. The results showed that the composites exhibited excellent comprehensive properties when 0.01 wt% GO and 0.007 wt% LaCl3 were incorporated in OMC nylon. The elastic modulus, flexural strength, flexural modulus, compressive strength, notched impact strength, and elongation‐at‐break for the OMC nylon/GO/LaCl3 composites increased by 6.1, 9.9, 18.2, 7.2, 40.8, and 24.4%, respectively, and the tensile strength was slightly improved. In addition, the abrasion quantity was reduced. POLYM. ENG. SCI., 59:982–988, 2019. © 2019 Society of Plastics Engineers 相似文献
11.
Yankun Xie Weiqu Liu Chunhua Liu Sha He Fengyuan Zhang Hongyi Shi Maiping Yang Zhengfang Wang 《应用聚合物科学杂志》2019,136(32):47842
To enhance the dispersion and interfacial interaction of graphene–epoxy matrix, polyacrylate chains grafted graphene oxide (PA-GO) was manufactured with A-174 functionalized GO (A-GO), methyl acrylate, and glycidyl methacrylate via free-radical random copolymerization technique. Fourier transform infrared, thermogravimetric analysis, X-ray photoelectron spectrum, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, and nuclear magnetic resonance were performed to investigate the structure of A-GO and PA-GO. Then, the PA-GO was incorporated into epoxy resin via in situ solution intercalation dispersion method in order to form an interpenetrating network structure with epoxy resin. Field emission scanning electron microscope results indicate that the PA-GO exhibits excellent dispersion and interfacial compatibility in the epoxy matrix. In compared with pure epoxy, the tensile strength and impact strength of the epoxy composite with 1 wt % PA-GO were shifted from 62.78 ± 2.54 to 70.68 ± 2.02 MPa (about 12.6%) and 3.55 ± 0.41 to 4.98 ± 0.33 kJ m−2 (about 40.3%), respectively. Moreover, increased storage modulus is also observed in the dynamic mechanical analysis measurements compared with that of neat epoxy resin. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47842. 相似文献
12.
Studies of the effect of particulate fillers on specific mechanical properties of vinyl ester epoxy (VE) reinforced with woven glass fiber composites were carried out with different filler types and particulate filler contents (1%, 3%, and 5% by weight). Two types of particulate filler were used, i.e., calcium carbonate (CC) and phenolic hollow microspheres (PHMS). The composites were prepared by using a hand lay‐up and vacuum bagging method. Woven glass fabric composites filled with particulate PHMS were observed to have better specific flexural strength and specific impact strength, as well as lower density, than those filled with particulate CC. Morphological features determined by scanning electron microscope (SEM) proved that the PHMS filler experienced good bonding in the VE matrix, a feature which contributed to the improvement in the properties of the composites. The incorporation of particulate fillers into the composites also influenced the storage modulus with a minimal effect on Tg. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers 相似文献
13.
《Ceramics International》2023,49(13):21667-21677
In recent years, researchers have been interested in incorporating inorganic nanoparticles into thermosetting epoxy composites to improve their mechanical properties. This research explores the diffusion of ball milled zircon (ZrSiO4) and anatase TiO2 nanoparticles with glass fibre reinforced epoxy polymer (GFRP) composites at the same weight percentages (0:0, 2.5:2.5, 5:5, and 7.5:7.5) to improve mechanical properties. The ZrSiO4 and TiO2 nanoparticles were prepared by an ultrasonic liquid processor, and composites were fabricated using the compression molding technique. The void percentage was calculated from the theoretical and measured densities of composites. Mechanical tests were conducted in accordance with ASTM standards. The particle sizes of zircon and titanium dioxide were calculated as 70.5 nm and 64.5 nm, respectively, using field emission scanning electron microscopy (FESEM), which reveals the fibre pullout, damaged interfaces, filler dispersion, and voids in specimens. The chemical composition, crystalline structure, and size were determined using X-ray diffraction (XRD). It was found that the GFRP composite with Zircon and TiO2 incorporated at a concentration of 5:5 wt% has a greater tensile strength of 74.34%, a tensile modulus of 18.14%, a flexural strength of 33.55%, a flexural modulus of 33.61%, a shore "D" hardness of 4.66%, and a capacity to absorb energy of 61.14% in notched specimens with neat GFRP. With filler addition, the percentage of elongation at failure in the 5:5 wt percent for the tensile test is 44.36%, and the flexural test is 24.38% higher than the neat sample. Hence, this work improves the GFRP composites' mechanical and structural properties. 相似文献
14.
A commercial production route to prepare polymer‐based nanocomposites by unmodified multilayer graphene
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In this study, we report our progress toward an effective method to prepare polyamide 6 (PA6)/multilayer graphene (MLG) nanocomposites via in situ polymerization. The thermal and mechanical properties of PA6 nanocomposites were investigated with low unmodified MLG content of 0.01–0.5 wt %. The dispersion of MLG sheets in the host matrix was studied in extensive detail while the properties of the resultant nanocomposites were systematically measured. Results indicate that the mechanical properties of the nanocomposites were significantly enhanced; the flexural modulus, flexural strength and impact strength increased by ~97%, ~69%, and ~76% relative to pristine PA6. Furthermore, the thermal stability of nanocomposites was enhanced and the weight loss temperature of PA6 was increased ~15°C at 0.5 wt % content of MLG. Moreover, incorporation of low loading of MLG can increase the crystallization speed of PA6 composites and promote the formation of the γ‐crystalline phase while also improving the crystallization temperature. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42742. 相似文献
15.
The objective of this research article is to compare the mechanical and tribological properties of jute‐glass‐fiber‐reinforced epoxy (J‐G‐E) hybrid composites with and without fly ash particulate filler. A dry hand lay‐up technique is used to fabricate all the laminates. The properties including flexural strength, tensile strength, flexural modulus, and erosion behavior of all the composites are evaluated as per American Society for Testing and Materials (ASTM) standards. The fly ash particulate‐filled hybrid composite shows a better mechanical and tribological property. The maximum flexural strength and flexural modulus are obtained for GJGJ+ 5 wt% fly ash filler epoxy composites. Whereas the maximum tensile strength is obtained for GJJG+ 10 wt% fly ash filler epoxy composites. Scanning Electron Microscopy (SEM) analysis also has been carried out to categorize mechanical and tribological behavior of composites. POLYM. COMPOS. 37:658–665, 2016. © 2014 Society of Plastics Engineers 相似文献
16.
Balasubramaniam Stalin Nagaraj Nagaprasad Venkataraman Vignesh Manickam Ravichandran 《乙烯基与添加剂工艺杂志》2019,25(Z2):E114-E128
This article deals with the usage of tamarind seed filler (TSF) as reinforcement in vinyl ester (VE) composites. The composite plates have been fabricated by compression molding machine with TSFs of varying wt% from 5 to 50 as reinforcement material, and their properties such as tensile, flexural, impact, hardness, water absorption, heat deflection tests, and thermogravimetric analysis are studied. The mechanical properties of TSF reinforced VE composites are optimum at 15 wt% filler. The tensile strength and flexural strength of TSF‐VE composites are estimated to be around 34.1 and 121 MPa, respectively. The better impact strength of TSF‐VE composites is found to be 14.02 kJ/m2, and barcol hardness can hold a value up to 42.33. Thermo gravimetric analysis and heat deflection test of TSF reinforced VE composite have improved the thermal stability. The fiber matrix interaction of the fractured mechanical testing specimen has been analyzed by scanning electron microscope. The TSF‐VE composites are used to fabricate the wheel hubcap of heavy‐duty buses, bus seat backrest cover, and silencer guard of the motorcycle. J. VINYL ADDIT. TECHNOL., 25:E114–E128, 2019. © 2019 Society of Plastics Engineers 相似文献
17.
The effects of applying titanate (TYZOR® TPT) and silane (DYNASYLAN VTMO) coupling agents to wet ground muscovite mica in nylon‐6 composites are described. Nylon‐6 composites of 5–40 wt % filler loadings were compounded using an APV Baker twin‐screw extruder. Mica (25 wt %) brought about an increase in the Young's modulus, flexural strength, and flexural modulus but did not produce significant variations in tensile and impact strength. Hence different coupling agents were employed. It was observed that titanate coupling agent improved the tensile strength and the Young's modulus of the composites much while the impact properties were enhanced by the silane coupling agent. An attempt was made to use ?‐caprolactum in improving the interfacial adhesion of the filler and the matrix. It was observed that ?‐caprolactum improved the flexural modulus of the composites most. The effect of coupling agents on the dielectric strength, heat distortion temperature, and morphology were also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4074–4081, 2006 相似文献
18.
针对石墨烯在复合材料增强增韧上的应用,对石墨烯进行了酸化处理,采用超声分散方法制备酸化石墨烯/环氧树脂(EP)浇注体,并在此基础上制备了酸化石墨烯/碳纤维(CF)/环氧树脂(EP)复合材料。分别利用红外光谱和透射电镜表征了酸化石墨烯表面结构和微观形貌,利用拉伸、弯曲、冲击等机械测试手段评价了酸化石墨烯改性EP和CF-EP的力学性能,并利用扫描电镜对复合材料拉伸断面形貌进行观察。试验结果表明:石墨烯酸化处理后,成功在表面引入了羟基、羧基等极性基团;酸化石墨烯可对EP和CF/EP进行有效增强增韧,当其添加量为0.2wt%时,EP拉伸强度和冲击强度分别提高了23.3%和109.8%,CF/EP拉伸强度、弯曲强度分别提高了6.0%和10.6%,当酸化石墨烯添加量为0.5wt%时,CF/EP复合材料层间剪切强度提高了7.4%。微观形貌分析表明,酸化石墨烯对CF/EP增强改性主要是通过对EP进行增强增韧,同时提高CF和EP之间的界面性能来实现的。 相似文献
19.
If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 相似文献
20.
Chenggong Chang Yi Cao Jiacao Yang Gang Zhang Shengru Long Xiaojun Wang Jie Yang 《应用聚合物科学杂志》2020,137(20):48709
The electrical conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) can be conspicuously enhanced at low conductive filler contents with the formation of segregated structure in the conductive polymer composites (CPCs). Nevertheless, poor interface adhesion of segregated composites results in poor mechanical properties due to the selective distribution of conductive fillers. In this work, a flexible approach was applied to fabricate the poly(phenylene sulfide)/poly(arylene sulfide sulfone)/graphene nanoplates (GNPs) composite with a unique double percolated structure. This composite exhibits an outstanding EMI SE of 38.8 dB with only 3 wt % GNPs, which is comparable to that of the conventional segregated structure counterpart. What is more, the tensile strength and Young's modulus of double percolated composites with 3 wt % GNPs are remarkably improved by ~892 and ~274% compared to conventional segregated structure, achieving 37.7 and 1788.3 MPa, respectively. This work provides a valuable method for producing CPCs with high EMI shielding performances and outstanding mechanical properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48709. 相似文献