Ionic‐Liquid Doping Enables High Transconductance,Fast Response Time,and High Ion Sensitivity in Organic Electrochemical Transistors

Organic electrochemical transistors (OECTs) are highly attractive for applications ranging from circuit elements and neuromorphic devices to transducers for biological sensing, and the archetypal channel material is poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate), PEDOT:PSS. The operation of OECTs involves the doping and dedoping of a conjugated polymer due to ion intercalation under the application of a gate voltage. However, the challenge is the trade‐off in morphology for mixed conduction since good electronic charge transport requires a high degree of ordering among PEDOT chains, while efficient ion uptake and volumetric doping necessitates open and loose packing of the polymer chains. Ionic‐liquid‐doped PEDOT:PSS that overcomes this limitation is demonstrated. Ionic‐liquid‐doped OECTs show high transconductance, fast transient response, and high device stability over 3600 switching cycles. The OECTs are further capable of having good ion sensitivity and robust toward physical deformation. These findings pave the way for higher performance bioelectronics and flexible/wearable electronics.     

Highly Sensitive Detection of Protein Biomarkers with Organic Electrochemical Transistors

The analysis of protein biomarkers is of great importance in the diagnosis of diseases. Although many convenient and low‐cost electrochemical approaches have been extensively investigated, they are not sensitive enough in the detection of protein biomarkers with low concentrations in physiological environments. Here, this study reports a novel organic‐electrochemical‐transistor‐based biosensor that can successfully detect cancer protein biomarkers with ultrahigh sensitivity. The devices are operated by detecting electrochemical activity on gate electrodes, which is dependent on the concentrations of proteins labeled with catalytic nanoprobes. The protein sensors can specifically detect a cancer biomarker, human epidermal growth factor receptor 2, down to the concentration of 10^?14 g mL^?1, which is several orders of magnitude lower than the detection limits of previously reported electrochemical approaches. Moreover, the devices can successfully differentiate breast cancer cells from normal cells at various concentrations. The ultrahigh sensitivity of the protein sensors is attributed to the inherent amplification function of the organic electrochemical transistors. This work paves a way for developing highly sensitive and low‐cost biosensors for the detection of various protein biomarkers in clinical analysis in the future.     

Dynamic and Tunable Threshold Voltage in Organic Electrochemical Transistors

In recent years, organic electrochemical transistors (OECTs) have found applications in chemical and biological sensing and interfacing, neuromorphic computing, digital logic, and printed electronics. However, the incorporation of OECTs in practical electronic circuits is limited by the relative lack of control over their threshold voltage, which is important for controlling the power consumption and noise margin in complementary and unipolar circuits. Here, the threshold voltage of OECTs is precisely tuned over a range of more than 1 V by chemically controlling the electrochemical potential at the gate electrode. This threshold voltage tunability is exploited to prepare inverters and amplifiers with improved noise margin and gain, respectively. By coupling the gate electrode with an electrochemical oscillator, single‐transistor oscillators based on OECTs with dynamic time‐varying threshold voltages are prepared. This work highlights the importance of electrochemistry at the gate electrode in determining the electrical properties of OECTs, and opens a path toward the system‐level design of low‐power OECT‐based electronics.     

Highly Stable Conjugated Polyelectrolytes for Water‐Based Hybrid Mode Electrochemical Transistors

Hydrophobic, self‐doped conjugated polyelectrolytes (CPEs) are introduced as highly stable active materials for organic electrochemical transistors (OECTs). The hydrophobicity of CPEs renders films very stable in aqueous solutions. The devices operate at gate voltages around zero and show no signs of degradation when operated for 10⁴ cycles under ambient conditions. These properties make the produced OECTs ideal devices for applications in bioelectronics.     

Microscopic Determination of Carrier Density and Mobility in Working Organic Electrochemical Transistors

A comprehensive understanding of electrochemical and physical phenomena originating the response of electrolyte‐gated transistors is crucial for improved handling and design of these devices. However, the lack of suitable tools for direct investigation of microscale effects has hindered the possibility to bridge the gap between experiments and theoretical models. In this contribution, a scanning probe setup is used to explore the operation mechanisms of organic electrochemical transistors by probing the local electrochemical potential of the organic film composing the device channel. Moreover, an interpretative model is developed in order to highlight the meaning of electrochemical doping and to show how the experimental data can give direct access to fundamental device parameters, such as local charge carrier concentration and mobility. This approach is versatile and provides insight into the organic semiconductor/electrolyte interface and useful information for materials characterization, device scaling, and sensing optimization.     

A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m⁻²), along with a responsivity as high as 1.6 A W⁻¹ (wavelength = 465 nm) for a dark current of 0.24 A m⁻² (drain voltage = −1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.     

High‐Performance Vertical Organic Electrochemical Transistors

Organic electrochemical transistors (OECTs) are promising transducers for biointerfacing due to their high transconductance, biocompatibility, and availability in a variety of form factors. Most OECTs reported to date, however, utilize rather large channels, limiting the transistor performance and resulting in a low transistor density. This is typically a consequence of limitations associated with traditional fabrication methods and with 2D substrates. Here, the fabrication and characterization of OECTs with vertically stacked contacts, which overcome these limitations, is reported. The resulting vertical transistors exhibit a reduced footprint, increased intrinsic transconductance of up to 57 mS, and a geometry‐normalized transconductance of 814 S m^?1. The fabrication process is straightforward and compatible with sensitive organic materials, and allows exceptional control over the transistor channel length. This novel 3D fabrication method is particularly suited for applications where high density is needed, such as in implantable devices.     

Organic thin-film transistors for chemical and biological sensing

Organic thin-film transistors (OTFTs) show promising applications in various chemical and biological sensors. The advantages of OTFT-based sensors include high sensitivity, low cost, easy fabrication, flexibility and biocompatibility. In this paper, we review the chemical sensors and biosensors based on two types of OTFTs, including organic field-effect transistors (OFETs) and organic electrochemical transistors (OECTs), mainly focusing on the papers published in the past 10 years. Various types of OTFT-based sensors, including pH, ion, glucose, DNA, enzyme, antibody-antigen, cell-based sensors, dopamine sensor, etc., are classified and described in the paper in sequence. The sensing mechanisms and the detection limits of the devices are described in details. It is expected that OTFTs may have more important applications in chemical and biological sensing with the development of organic electronics.     

Gas Sensors Based on Nano/Microstructured Organic Field‐Effect Transistors

Benefiting from the advantages of organic field‐effect transistors (OFETs), including synthetic versatility of organic molecular design and environmental sensitivity, gas sensors based on OFETs have drawn much attention in recent years. Potential applications focus on the detection of specific gas species such as explosive, toxic gases, or volatile organic compounds (VOCs) that play vital roles in environmental monitoring, industrial manufacturing, smart health care, food security, and national defense. To achieve high sensitivity, selectivity, and ambient stability with rapid response and recovery speed, the regulation and adjustment of the nano/microstructure of the organic semiconductor (OSC) layer has proven to be an effective strategy. Here, the progress of OFET gas sensors with nano/microstructure is selectively presented. Devices based on OSC films one dimensional (1D) single crystal nanowires, nanorods, and nanofibers are introduced. Then, devices based on two dimensional (2D) and ultrathin OSC films, fabricated by methods such as thermal evaporation, dip‐coating, spin‐coating, and solution‐shearing methods are presented, followed by an introduction of porous OFET sensors. Additionally, the applications of nanostructured receptors in OFET sensors are given. Finally, an outlook in view of the current research state is presented and eight further challenges for gas sensors based on OFETs are suggested.     

Ion Exchange Gels Allow Organic Electrochemical Transistor Operation with Hydrophobic Polymers in Aqueous Solution

Conjugated-polymer-based organic electrochemical transistors (OECTs) are being studied for applications ranging from biochemical sensing to neural interfaces. While new polymers that interface digital electronics with the aqueous chemistry of life are being developed, the majority of high-performance organic transistor materials are poor at transporting biologically relevant ions. Here, the operating mode of an organic transistor is changed from that of an electrolyte-gated organic field-effect transistor (EGOFET) to that of an OECT by incorporating an ion exchange gel between the active layer and the aqueous electrolyte. This device works by taking up biologically relevant ions from solution and injecting more hydrophobic ions into the active layer. Using poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno[3,2-b]thiophene] as the active layer and a blend of an ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and poly(vinylidene fluoride-co-hexafluoropropylene) as the ion exchange gel, four orders of magnitude improvement in device transconductance and a 100-fold increase in kinetics are demonstrated. The ability of the ion-exchange-gel OECT to record biological signals by measuring the action potentials of a Venus flytrap is demonstrated. These results show the possibility of using interface engineering to open up a wider palette of organic semiconductors as OECTs that can be gated by aqueous solutions.