High Phase Purity of Large‐Sized 1T′‐MoS2 Monolayers with 2D Superconductivity

The development of transition metal dichalcogenides has greatly accelerated research in the 2D realm, especially for layered MoS₂. Crucially, the metallic MoS₂ monolayer is an ideal platform in which novel topological electronic states can emerge and also exhibits excellent energy conversion and storage properties. However, as its intrinsic metallic phase, little is known about the nature of 2D 1T′‐MoS₂, probably because of limited phase uniformity (<80%) and lateral size (usually <1 µm) in produced materials. Herein, solution processing to realize high phase‐purity 1T′‐MoS₂ monolayers with large lateral size is demonstrated. Direct chemical exfoliation of millimeter‐sized 1T′ crystal is introduced to successfully produce a high‐yield of 1T′‐MoS₂ monolayers with over 97% phase purity and unprecedentedly large size up to tens of micrometers. Furthermore, the large‐sized and high‐quality 1T′‐MoS₂ nanosheets exhibit clear intrinsic superconductivity among all thicknesses down to monolayer, accompanied by a slow drop of transition temperature from 6.1 to 3.0 K. Prominently, unconventional superconducting behavior with upper critical field far beyond the Pauli limit is observed in the centrosymmetric 1T′‐MoS₂ structure. The results open up an ideal approach to explore the properties of 2D metastable polymorphic materials.     

One‐Step Solution Phase Growth of Transition Metal Dichalcogenide Thin Films Directly on Solid Substrates

Ultrathin transition metal dichalcogenides (TMDs) have exotic electronic properties. With success in easy synthesis of high quality TMD thin films, the potential applications will become more viable in electronics, optics, energy storage, and catalysis. Synthesis of TMD thin films has been mostly performed in vacuum or by thermolysis. So far, there is no solution phase synthesis to produce large‐area thin films directly on target substrates. Here, this paper reports a one‐step quick synthesis (within 45–90 s) of TMD thin films (MoS₂, WS₂, MoSe₂, WSe₂, etc.) on solid substrates by using microwave irradiation on a precursor‐containing electrolyte solution. The numbers of the quintuple layers of the TMD thin films are precisely controllable by varying the precursor's concentration in the electrolyte solution. A photodetector made of MoS₂ thin film comprising of small size grains shows near‐IR absorption, supported by the first principle calculation, exhibits a high photoresponsivity (>300 mA W^?1) and a fast response (124 µs). This study paves a robust way for the synthesis of various TMD thin films in solution phases.     

Synthesis of In‐Plane Artificial Lattices of Monolayer Multijunctions

Recently, monolayers of van der Waals materials, including transition metal dichalcogenides (TMDs), are considered ideal building blocks for constructing 2D artificial lattices and heterostructures. Heterostructures with multijunctions of more than two monolayer TMDs are intriguing for exploring new physics and materials properties. Obtaining in‐plane heterojunctions of monolayer TMDs with atomically sharp interfaces is very significant for fundamental research and applications. Currently, multistep synthesis for more than two monolayer TMDs remains a challenge because decomposition or compositional alloying is thermodynamically favored at the high growth temperature. Here, a multistep chemical vapor deposition (CVD) synthesis of the in‐plane multijunctions of monolayer TMDs is presented. A low growth temperature synthesis is developed to avoid compositional fluctuations of as‐grown TMDs, defects formations, and interfacial alloying for high heterointerface quality and thermal stability of monolayer TMDs. With optimized parameters, atomically sharp interfaces are successfully achieved in the synthesis of in‐plane artificial lattices of the WS₂/WSe₂/MoS₂ at reduced growth temperatures. Growth behaviors as well as the heterointerface quality are carefully studied in varying growth parameters. Highly oriented strain patterns are found in the second harmonic generation imaging of the TMD multijunctions, suggesting that the in‐plane heteroepitaxial growth may induce distortion for unique material symmetry.     

Preparation of High‐Percentage 1T‐Phase Transition Metal Dichalcogenide Nanodots for Electrochemical Hydrogen Evolution

Nanostructured transition metal dichalcogenides (TMDs) are proven to be efficient and robust earth‐abundant electrocatalysts to potentially replace precious platinum‐based catalysts for the hydrogen evolution reaction (HER). However, the catalytic efficiency of reported TMD catalysts is still limited by their low‐density active sites, low conductivity, and/or uncleaned surface. Herein, a general and facile method is reported for high‐yield, large‐scale production of water‐dispersed, ultrasmall‐sized, high‐percentage 1T‐phase, single‐layer TMD nanodots with high‐density active edge sites and clean surface, including MoS₂, WS₂, MoSe₂, Mo_0.5W_0.5S₂, and MoSSe, which exhibit much enhanced electrochemical HER performances as compared to their corresponding nanosheets. Impressively, the obtained MoSSe nanodots achieve a low overpotential of ?140 mV at current density of 10 mA cm^?2, a Tafel slope of 40 mV dec^?1, and excellent long‐term durability. The experimental and theoretical results suggest that the excellent catalytic activity of MoSSe nanodots is attributed to the high‐density active edge sites, high‐percentage metallic 1T phase, alloying effect and basal‐plane Se‐vacancy. This work provides a universal and effective way toward the synthesis of TMD nanostructures with abundant active sites for electrocatalysis, which can also be used for other applications such as batteries, sensors, and bioimaging.     

Insights into the Crystallinity of Layer‐Structured Transition Metal Dichalcogenides on Potassium Ion Battery Performance: A Case Study of Molybdenum Disulfide

Layer‐structured transition metal dichalcogenides (LS‐TMDs) are being heavily studied in K‐ion batteries (KIBs) owing to their structural uniqueness and interesting electrochemical mechanisms. Synthetic methods are designed primarily focusing on high capacities. The achieved performance is often the collective results of several contributing factors. It is important to decouple the factors and understand their functions individually. This work presents a study focusing on an individual factor, crystallinity, by taking MoS₂ as a demonstrator. The performance of low and high‐crystallized MoS₂ is compared to show the function of crystallinity is dependent on the electrochemical mechanism. Lower crystallinity can alleviate diffusional limitation in 0.5–3.0 V, where intercalation reaction takes charge in storing K‐ions. Higher crystallinity can ensure the structural stability of the MoS₂ layers and promote surface charge storage in 0.01–3.0 V, where conversion reaction mainly contributes. The low‐crystallized MoS₂ exhibits an intercalation capacity (118 mAh g^?1), good cyclability (85% over 100 cycles), and great rate capability (41 mAh g^?1 at 2 A g^?1), and the high‐crystallized MoS₂ delivers a high capacity of 330 mAh g^?1 at 1 A g^?1 and retains 161 mAh g^?1 at 20 A g^?1, being one of the best among the reported LS‐TMDs in KIBs.     

Metastable Polymorphic Phases in Monolayer TaTe2

Polymorphic phases and collective phenomena—such as charge density waves (CDWs)—in transition metal dichalcogenides (TMDs) dictate the physical and electronic properties of the material. Most TMDs naturally occur in a single given phase, but the fine-tuning of growth conditions via methods such as molecular beam epitaxy (MBE) allows to unlock otherwise inaccessible polymorphic structures. Exploring and understanding the morphological and electronic properties of new phases of TMDs is an essential step to enable their exploitation in technological applications. Here, scanning tunneling microscopy (STM) is used to map MBE-grown monolayer (ML) TaTe₂. This work reports the first observation of the 1H polymorphic phase, coexisting with the 1T, and demonstrates that their relative coverage can be controlled by adjusting synthesis parameters. Several superperiodic structures, compatible with CDWs, are observed to coexist on the 1T phase. Finally, this work provides theoretical insight on the delicate balance between Te…Te and Ta–Ta interactions that dictates the stability of the different phases. The findings demonstrate that TaTe₂ is an ideal platform to investigate competing interactions, and indicate that accurate tuning of growth conditions is key to accessing metastable states in TMDs.     

Atomic‐Level Customization of 4 in. Transition Metal Dichalcogenide Multilayer Alloys for Industrial Applications

Despite many encouraging properties of transition metal dichalcogenides (TMDs), a central challenge in the realm of industrial applications based on TMD materials is to connect the large‐scale synthesis and reproducible production of highly crystalline TMD materials. Here, the primary aim is to resolve simultaneously the two inversely related issues through the synthesis of MoS_{2(1?x )}Se_2x ternary alloys with customizable bichalcogen atomic (S and Se) ratio via atomic‐level substitution combined with a solution‐based large‐area compatible approach. The relative concentration of bichalcogen atoms in the 2D alloy can be effectively modulated by altering the selenization temperature, resulting in 4 in. scale production of MoS_1.62Se_0.38, MoS_1.37Se_0.63, MoS_1.15Se_0.85, and MoS_0.46Se_1.54 alloys, as well as MoS₂ and MoSe₂. Comprehensive spectroscopic evaluations for vertical and lateral homogeneity in terms of heteroatom distribution in the large‐scale 2D TMD alloys are implemented. Se‐stimulated strain effects and a detailed mechanism for the Se substitution in the MoS₂ crystal are further explored. Finally, the capability of the 2D alloy for industrial application in nanophotonic devices and hydrogen evolution reaction (HER) catalysts is validated. Substantial enhancements in the optoelectronic and HER performances of the 2D ternary alloy compared with those of its binary counterparts, including pure‐phase MoS₂ and MoSe₂, are unambiguously achieved.     

Epitaxial Growth of Rectangle Shape MoS2 with Highly Aligned Orientation on Twofold Symmetry a‐Plane Sapphire

Research on transition metal dichalcogenides (TMDs) has been accelerated by the development of large‐scale synthesis based on chemical vapor deposition (CVD) growth. However, in most cases, CVD‐grown TMDs are composed of randomly oriented grains, and thus contain many distorted grain boundaries (GBs), which seriously degrade their electrical and photoelectrical properties. Here, the epitaxial growth of highly aligned MoS₂ grains is reported on a twofold symmetry a‐plane sapphire substrate. The obtained MoS₂ grains have an unusual rectangle shape with perfect orientation alignment along the [1‐100] crystallographic direction of a‐plane sapphire. It is found that the growth temperature plays a key role in its orientation alignment and morphology evolution, and high temperature is beneficial to the initial MoS₂ seeds rotate to the favorable orientation configurations. In addition, the photoluminescence quenching of the well‐aligned MoS₂ grains indicates a strong MoS₂?substrate interaction which induces the anisotropic growth of MoS₂, and thus brings the formation of rectangle shape grains. Moreover, the well‐aligned MoS₂ grains splice together without GB formation, and thus that has negligible effect on its electrical transport properties. The progress achieved in this work could promote the controlled synthesis of large‐area TMDs single crystal film and the scalable fabrication of high‐performance electronic devices.     

Structural Phase Transition Effect on Resistive Switching Behavior of MoS2‐Polyvinylpyrrolidone Nanocomposites Films for Flexible Memory Devices

The 2H phase and 1T phase coexisting in the same molybdenum disulfide (MoS₂) nanosheets can influence the electronic properties of the materials. The 1T phase of MoS₂ is introduced into the 2H‐MoS₂ nanosheets by two‐step hydrothermal synthetic methods. Two types of nonvolatile memory effects, namely write‐once read‐many times memory and rewritable memory effect, are observed in the flexible memory devices with the configuration of Al/1T@2H‐MoS₂‐polyvinylpyrrolidone (PVP)/indium tin oxide (ITO)/polyethylene terephthalate (PET) and Al/2H‐MoS₂‐PVP/ITO/PET, respectively. It is observed that structural phase transition in MoS₂ nanosheets plays an important role on the resistive switching behaviors of the MoS₂‐based device. It is hoped that our results can offer a general route for the preparation of various promising nanocomposites based on 2D nanosheets of layered transition metal dichalcogenides for fabricating the high performance and flexible nonvolatile memory devices through regulating the phase structure in the 2D nanosheets.     

Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley–Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂/MoS₂ NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.     

Aligned Heterointerface‐Induced 1T‐MoS2 Monolayer with Near‐Ideal Gibbs Free for Stable Hydrogen Evolution Reaction

1T‐phase molybdenum disulfide (1T‐MoS₂) exhibits superior hydrogen evolution reaction (HER) over 2H‐phase MoS₂ (2H‐MoS₂). However, its thermodynamic instability is the main drawback impeding its practical application. In this work, a stable 1T‐MoS₂ monolayer formed at edge‐aligned 2H‐MoS₂ and a reduced graphene oxide heterointerface (EA‐2H/1T/RGO) using a precursor‐in‐solvent synthesis strategy are reported. Theoretical prediction indicates that the edge‐aligned layer stacking can induce heterointerfacial charge transfer, which results in a phase transition of the interfacial monolayer from 2H to 1T that realizes thermodynamic stability based on the adhesion energy between MoS₂ and graphene. As an electrocatalyst for HER, EA‐2H/1T/RGO displays an onset potential of ?103 mV versus RHE, a Tafel slope of 46 mV dec^?1 and 10 h stability in acidic electrolyte. The unexpected activity of EA‐2H/1T/RGO beyond 1T‐MoS₂ is due to an inherent defect caused by the gliding of S atoms during the phase transition from 2H to 1T, leading the Gibbs free energy of hydrogen adsorption (ΔG_H*) to decrease from 0.13 to 0.07 eV, which is closest to the ideal value (0.06 eV) of 2H‐MoS₂. The presented work provides fundamental insights into the impressive electrochemical properties of HER and opens new avenues for phase transitions at 2D/2D hybrid interfaces.     

Integrated Freestanding Two‐dimensional Transition Metal Dichalcogenides

This paper reports on the integration of freestanding transition metal dichalcogenides (TMDs). Monolayer (1‐L) MoS₂, WS₂, and WSe₂ as representative TMDs are transferred on ZnO nanorods (NRs), used here as nanostructured substrates. The photoluminescence (PL) spectra of 1‐L TMDs on NRs show a giant PL intensity enhancement, compared with those of 1‐L TMDs on SiO₂. The strong increases in Raman and PL intensities, along with the characteristic peak shifts, confirm the absence of stress in the TMDs on NRs. In depth analysis of the PL emission also reveals that the ratio between the exciton and trion peak intensity is almost not modified after transfer. The latter shows that the effect of charge transfer between the 1‐L TMDs and ZnO NRs is here negligible. Furthermore, confocal PL and Raman spectroscopy reveal a fairly consistent distribution of PL and Raman intensities. These observations are in agreement with a very limited points contact between the support and the 1‐L TMDs. The entire process reported here is scalable and may pave the way for the development of very efficient ultrathin optoelectronics.     

Ultrathin Two‐Dimensional Multinary Layered Metal Chalcogenide Nanomaterials

Ultrathin two‐dimensional (2D) layered transition metal dichalcogenides (TMDs), such as MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂ and WSe₂, have attracted considerable attention over the past six years owing to their unique properties and great potential in a wide range of applications. Aiming to achieve tunable properties and optimal application performances, great effort is devoted to the exploration of 2D multinary layered metal chalcogenide nanomaterials, which include ternary metal chalcogenides with well‐defined crystal structures, alloyed TMDs, heteroatom‐doped TMDs and 2D metal chalcogenide heteronanostructures. These novel 2D multinary layered metal chalcogenide nanomaterials exhibit some unique properties compared to 2D binary TMD counterparts, thus holding great promise in various potential applications including electronics/optoelectronics, catalysis, sensors, biomedicine, and energy storage and conversion with enhanced performances. This article focuses on the state‐of‐art progress on the preparation, characterization and applications of ultrathin 2D multinary layered metal chalcogenide nanomaterials.     

A Metal–Organic Frameworks Derived 1T-MoS2 with Expanded Layer Spacing for Enhanced Electrocatalytic Hydrogen Evolution

Metal phase molybdenum disulfide (1T-MoS₂) is considered a promising electrocatalyst for hydrogen evolution reaction (HER) due to its activated basal and superior electrical conductivity. Here, a one-step solvothermal route is developed to prepare 1T-MoS₂ with expanded layer spacing through the derivatization of a Mo-based organic framework (Mo-MOFs). Benefiting from N,N-dimethylformamide oxide as external stress, the interplanar spacing of (002) of the MoS₂ catalyst is extended to 10.87 Å, which represents the largest one for the 1T-MoS₂ catalyst prepared by the bottom-up approach. Theoretical calculations reveal that the expanded crystal planes alter the electronic structure of 1T-MoS₂, lower the adsorption–desorption potentials of protons, and thus, trigger efficient catalytic activity for HER. The optimal 1T-MoS₂ catalyst exhibits an overpotential of 98 mV at 10 mA cm⁻² for HER, corresponding to a Tafel slope of 52 mV dec⁻¹. This Mo-MOFs-derived strategy provides a potential way to design high-performance catalysts by adjusting the layer spacing of 2D materials.     

Potential 2D Materials with Phase Transitions: Structure,Synthesis, and Device Applications

Layered materials with phase transitions, such as charge density wave (CDW) and magnetic and dipole ordering, have potential to be exfoliated into monolayers and few‐layers and then become a large and important subfamily of two‐dimensional (2D) materials. Benefitting from enriched physical properties from the collective interactions, long‐range ordering, and related phase transitions, as well as the atomic thickness yet having nondangling bonds on the surface, 2D phase‐transition materials have vast potential for use in new‐concept and functional devices. Here, potential 2D phase‐transition materials with CDWs and magnetic and dipole ordering, including transition metal dichalcogenides, transition metal halides, metal thio/selenophosphates, chromium silicon/germanium tellurides, and more, are introduced. The structures and experimental phase‐transition properties are summarized for the bulk materials and some of the obtained monolayers. In addition, recent experimental progress on the synthesis and measurement of monolayers, such as 1T‐TaS₂, CrI₃, and Cr₂Ge₂Te₆, is reviewed.     

Rational Design of Nanoporous MoS2/VS2 Heteroarchitecture for Ultrahigh Performance Ammonia Sensors

2D transition metal dichalcogenides (TMDs) have received widespread interest by virtue of their excellent electrical, optical, and electrochemical characteristics. Recent studies on TMDs have revealed their versatile utilization as electrocatalysts, supercapacitors, battery materials, and sensors, etc. In this study, MoS₂ nanosheets are successfully assembled on the porous VS₂ (P‐VS₂) scaffold to form a MoS₂/VS₂ heterostructure. Their gas‐sensing features, such as sensitivity and selectivity, are investigated by using a quartz crystal microbalance (QCM) technique. The QCM results and density functional theory (DFT) calculations reveal the impressive affinity of the MoS₂/VS₂ heterostructure sensor toward ammonia with a higher adsorption uptake than the pristine MoS₂ or P‐VS₂ sensor. Furthermore, the adsorption kinetics of the MoS₂/VS₂ heterostructure sensor toward ammonia follow the pseudo‐first‐order kinetics model. The excellent sensing features of the MoS₂/VS₂ heterostructure render it attractive for high‐performance ammonia sensors in diverse applications.     

Ultrathin Transition Metal Dichalcogenide/3d Metal Hydroxide Hybridized Nanosheets to Enhance Hydrogen Evolution Activity

The vast majority of the reported hydrogen evolution reaction (HER) electrocatalysts perform poorly under alkaline conditions due to the sluggish water dissociation kinetics. Herein, a hybridization catalyst construction concept is presented to dramatically enhance the alkaline HER activities of catalysts based on 2D transition metal dichalcogenides (TMDs) (MoS₂ and WS₂). A series of ultrathin 2D‐hybrids are synthesized via facile controllable growth of 3d metal (Ni, Co, Fe, Mn) hydroxides on the monolayer 2D‐TMD nanosheets. The resultant Ni(OH)₂ and Co(OH)₂ hybridized ultrathin MoS₂ and WS₂ nanosheet catalysts exhibit significantly enhanced alkaline HER activity and stability compared to their bare counterparts. The 2D‐MoS₂/Co(OH)₂ hybrid achieves an extremely low overpotential of ≈128 mV at 10 mA cm^?2 in 1 m KOH. The combined theoretical and experimental studies confirm that the formation of the heterostructured boundaries by suitable hybridization of the TMD and 3d metal hydroxides is responsible for the improved alkaline HER activities because of the enhanced water dissociation step and lowers the corresponding kinetic energy barrier by the hybridized 3d metal hydroxides.     

A General Method for the Chemical Synthesis of Large‐Scale,Seamless Transition Metal Dichalcogenide Electronics

The capability to directly build atomically thin transition metal dichalcogenide (TMD) devices by chemical synthesis offers important opportunities to achieve large‐scale electronics and optoelectronics with seamless interfaces. Here, a general approach for the chemical synthesis of a variety of TMD (e.g., MoS₂, WS₂, and MoSe₂) device arrays over large areas is reported. During chemical vapor deposition, semiconducting TMD channels and metallic TMD/carbon nanotube (CNT) hybrid electrodes are simultaneously formed on CNT‐patterned substrate, and then coalesce into seamless devices. Chemically synthesized TMD devices exhibit attractive electrical and mechanical properties. It is demonstrated that chemically synthesized MoS₂–MoS₂/CNT devices have Ohmic contacts between MoS₂/CNT hybrid electrodes and MoS₂ channels. In addition, MoS₂–MoS₂/CNT devices show greatly enhanced mechanical stability and photoresponsivity compared with conventional gold‐contacted devices, which makes them suitable for flexible optoelectronics. Accordingly, a highly flexible pixel array based on chemically synthesized MoS₂–MoS₂/CNT photodetectors is applied for image sensing.     

In‐Plane Anisotropic Properties of 1T′‐MoS2 Layers

Crystal phases play a key role in determining the physicochemical properties of a material. To date, many phases of transition metal dichalcogenides have been discovered, such as octahedral (1T), distorted octahedral (1T′), and trigonal prismatic (2H) phases. Among these, the 1T′ phase offers unique properties and advantages in various applications. Moreover, the 1T′ phase consists of unique zigzag chains of the transition metals, giving rise to interesting in‐plane anisotropic properties. Herein, the in‐plane optical and electrical anisotropies of metastable 1T′‐MoS₂ layers are investigated by the angle‐resolved Raman spectroscopy and electrical measurements, respectively. The deconvolution of J₁ and J₂ peaks in the angle‐resolved Raman spectra is a key characteristic of high‐quality 1T′‐MoS₂ crystal. Moreover, it is found that its electrocatalytic performance may be affected by the crystal orientation of anisotropic material due to the anisotropic charge transport.     

Colloidal Single‐Layer Photocatalysts for Methanol‐Storable Solar H2 Fuel

Molecular surfactants are widely used to control low‐dimensional morphologies, including 2D nanomaterials in colloidal chemical synthesis, but it is still highly challenging to accurately control single‐layer growth for 2D materials. A scalable stacking‐hinderable strategy to not only enable exclusive single‐layer growth mode for transition metal dichalcogenides (TMDs) selectively sandwiched by surfactant molecules but also retain sandwiched single‐layer TMDs' photoredox activities is developed. The single‐layer growth mechanism is well explained by theoretical calculation. Three types of single‐layer TMDs, including MoS₂, WS₂, and ReS₂, are successfully synthesized and demonstrated in solar H₂ fuel production from hydrogen‐stored liquid carrier—methanol. Such H₂ fuel production from single‐layer MoS₂ nanosheets is CO_x‐free and reliably workable under room temperature and normal pressure with the generation rate reaching ≈617 µmole g^?1 h^?1 and excellent photoredox endurability. This strategy opens up the feasible avenue to develop methanol‐storable solar H₂ fuel with facile chemical rebonding actualized by 2D single‐layer photocatalysts.