Rational Design of Metal Nanoframes for Catalysis and Plasmonics

Recently, metal nanoframes have received increased attention due to their unique spatial and physicochemical, e.g., catalytic and plasmonic properties. So far, a variety of synthetic procedures have been developed to fabricate metal nanoframes with different shapes, sizes and compositions. Typical synthesis of metal nanoframes involves two stages: 1) formation of solid nanocrystals and 2) hollowing out the interiors and side faces. In this review, solution‐phase synthetic strategies are summarized, based on galvanic replacement reactions, oxidative etching, the Kirkendall effect, electrodeposition, and template‐assisted growth, as well as one‐pot synthesis. Their potential applications in catalysis and optical sensing are overviewed as well.     

Carbon‐Rich Nanomaterials: Fascinating Hydrogen and Oxygen Electrocatalysts

Hydrogen energy is commonly considered as a clean and sustainable alternative to the traditional fossil fuels. Toward universal utilization of hydrogen energy, developing high‐efficiency, low‐cost, and sustainable energy conversion technologies, especially water‐splitting electrolyzers and fuel cells, is of paramount significance. In order to enhance the energy conversion efficiency of the water‐splitting electrolyzers and fuel cells, earth‐abundant and stable electrocatalysts are essential for accelerating the sluggish kinetics of hydrogen and oxygen reactions. In the past decade, carbon‐rich nanomaterials have emerged as a promising class of hydrogen and oxygen electrocatalysts. Here, the development and electrocatalytic activity of various carbon‐rich materials, including metal‐free carbon, conjugated porous polymers, graphdiyne, covalent organic frameworks (COFs), atomic‐metal‐doped carbon, as well as metal–organic frameworks (MOFs), are demonstrated. In particular, the correlations between their porous nanostructures/electronic structures of active centers and electrocatalytic performances are emphatically discussed. Therefore, this review article guides the rational design and synthesis of high‐performance, metal‐free, and noble‐metal‐free carbon‐rich electrocatalysts and eventually advances the rapid development of water‐splitting electrolyzers and fuel cells toward practical applications.     

Enhancing Electrocatalytic Water Splitting by Strain Engineering

Electrochemical water splitting driven by sustainable energy such as solar, wind, and tide is attracting ever‐increasing attention for sustainable production of clean hydrogen fuel from water. Leveraging these advances requires efficient and earth‐abundant electrocatalysts to accelerate the kinetically sluggish hydrogen and oxygen evolution reactions (HER and OER). A large number of advanced water‐splitting electrocatalysts have been developed through recent understanding of the electrochemical nature and engineering approaches. Specifically, strain engineering offers a novel route to promote the electrocatalytic HER/OER performances for efficient water splitting. Herein, the recent theoretical and experimental progress on applying strain to enhance heterogeneous electrocatalysts for both HER and OER are reviewed and future opportunities are discussed. A brief introduction of the fundamentals of water‐splitting reactions, and the rationalization for utilizing mechanical strain to tune an electrocatalyst is given, followed by a discussion of the recent advances on strain‐promoted HER and OER, with special emphasis given to combined theoretical and experimental approaches for determining the optimal straining effect for water electrolysis, along with experimental approaches for creating and characterizing strain in nanocatalysts, particularly emerging 2D nanomaterials. Finally, a vision for a future sustainable hydrogen fuel community based on strain‐promoted water electrolysis is proposed.     

Robust Synthesis of Gold Cubic Nanoframes through a Combination of Galvanic Replacement,Gold Deposition,and Silver Dealloying

A facile, robust approach to the synthesis of Au cubic nanoframes is described. The synthesis involves three major steps: 1) preparation of Au–Ag alloyed nanocages using a galvanic replacement reaction between Ag nanocubes and HAuCl₄; 2) deposition of thin layers of pure Au onto the surfaces of the nanocages by reducing HAuCl₄ with ascorbic acid, and; 3) formation of Au cubic nanoframes through a dealloying process with HAuCl₄. The key to the formation of Au cubic nanoframes is to coat the surfaces of the Au–Ag nanocages with sufficiently thick layers of Au before they are dealloyed. The Au layer could prevent the skeleton of a nanocage from being fragmented during the dealloying step. The as‐prepared Au cubic nanoframes exhibit tunable localized surface plasmon resonance peaks in the near‐infrared region, but with much lower Ag content as compared with the initial Au–Ag nanocages.     

Pt‐Pd Bimetal Popcorn Nanocrystals: Enhancing the Catalytic Performance by Combination Effect of Stable Multipetals Nanostructure and Highly Accessible Active Sites

Exploration of highly efficient electrocatalysts is significantly urgent for the extensive adoption of the fuel cells. Because of their high activity and super stability, Pt‐Pd bimetal nanocrystals have been widely recognized as one class of promising electrocatalysts for oxygen reduction. This article presents the synthesis of popcorn‐shaped Pt‐Pd bimetal nanoparticles with a wide composition range through a facile hydrothermal strategy. The hollow‐centered nanoparticles are surrounded by several petals and concave surfaces. By exploring the oxygen reduction reaction on the carbon supported Pt‐Pd popcorns in perchloric acid solution, it is found that compared with the commercial Pt/C catalyst the present catalysts display superior catalytic performances in aspects of catalytic activity and stability. More importantly, the Pt‐Pd popcorns display minor performance degradations through prolonged potential cycling. The enhanced performances can be mainly attributed to the unique popcorn structure of the Pt‐Pd components, which allows the appearance and long existence of the high active sites with more accessibility. The present work highlights the key roles of accessible high active sites in the oxygen reduction reaction, which will ultimately guide the design of highly durable Pt‐Pd catalysts.     

Multi-Layered PtAu Nanoframes and Their Light-Enhanced Electrocatalytic Activity via Plasmonic Hot Spots (Small 17/2023)

Here, the rational design of complex PtAu double nanoframes (DNFs) for plasmon-enhanced electrocatalytic activity toward the methanol oxidation reaction (MOR) is reported. The synthetic strategy for the DNFs consists of on-demand multiple synthetic chemical toolkits, including well-faceted Au growth, rim-on selective Pt deposition, and selective Au etching steps. DNFs are synthesized by utilizing Au truncated octahedrons (TOh) as a starting template. The outer octahedral (Oh) nanoframes (NFs) nest the inner TOh NFs, eventually forming DNFs with a tunable intra-nanogap distance. Residual Au adatoms on Pt skeletons act as light entrappers and produce plasmonic hot spots between inner and outer frames through localized surface plasmon resonance (LSPR) coupling, which promotes enhanced electrocatalytic activity for the MOR. Importantly, the correlation between the gap-induced hot carriers and electrocatalytic activity is evaluated. The highest catalytic activity is achieved when the gap is the narrowest. To further harness their light-trapping capability, hierarchically structured triple NFs (TNFs) are synthesized, wherein three NFs are entangled in a single entity with a high density of hot regions, exhibiting superior electrocatalytic activity toward the MOR with a sixfold larger current density under light irradiation compared to the dark conditions.     

IrPd Nanoalloy-Structured Bifunctional Electrocatalyst for Efficient and pH-Universal Water Splitting

The lack of high efficiency and pH-universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large-scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mg_Ir⁻¹ in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir₄₄Pd₅₆/KB catalyst shows a stability of >20 h at a current of 250 mA cm⁻² for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.     

Electronic and Structural Engineering of Carbon‐Based Metal‐Free Electrocatalysts for Water Splitting

Since first being reported as possible electrocatalysts to substitute platinum for the oxygen reduction reaction (ORR), carbon‐based metal‐free nanomaterials have been considered a class of promising low‐cost materials for clean and sustainable energy‐conversion reactions. However, beyond the ORR, the development of carbon‐based catalysts for other electrocatalytic reactions is still limited. More importantly, the intrinsic activity of most carbon‐based metal‐free catalysts is inadequate compared to their metal‐based counterparts. To address this challenge, more design strategies are needed in order to improve the overall performance of carbon‐based materials. Herein, using water splitting as an example, some state‐of‐the‐art strategies in promoting carbon‐based nanomaterials are summarized, including graphene, carbon nanotubes, and graphitic‐carbon nitride, as highly active electrocatalysts for hydrogen evolution and oxygen evolution reactions. It is shown that by rationally tuning the electronic and/or physical structure of the carbon nanomaterials, adsorption of reaction intermediates is optimized, consequently improving the apparent electrocatalytic performance. These strategies may facilitate the development in this area and lead to the discovery of advanced carbon‐based nanomaterials for various applications in energy‐conversion processes.     

Promoting Electrocatalysis upon Aerogels

Electrocatalysis plays a prominent role in renewable energy conversion and storage, enabling a number of sustainable processes for future technologies. There are generally three strategies to improve the efficiency (or activity) of the electrocatalysts: i) increasing the intrinsic activity of the catalyst itself, ii) improving the exposure of active sites, and iii) accelerating mass transfer during catalysis (both reactants and products). These strategies are not mutually exclusive and can ideally be addressed simultaneously, leading to the largest improvements in activity. Aerogels, as featured by large surface area, high porosity, and self‐supportability, provide a platform that matches all the aforementioned criteria for the design of efficient electrocatalysts. The field of aerogel synthesis has seen much progress in recent years, mainly thanks to the rapid development of nanotechnology. Employing precursors with different properties enables the resulting aerogel with targeted catalytic properties and improved performances. Here, the design strategies of aerogel catalysts are demonstrated, and their performance for several electrochemical reactions is reviewed. The common principles that govern electrocatalysis are further discussed for each category of reactions, thus serving as a guide to the development of future aerogel electrocatalysts.     

Self‐Supported Mesostructured Pt‐Based Bimetallic Nanospheres Containing an Intermetallic Phase as Ultrastable Oxygen Reduction Electrocatalysts

Developing highly active and stable cathode catalysts is of pivotal importance for proton exchange membrane fuel cells (PEMFCs). While carbon‐supported nanostructured Pt‐based catalysts have so far been the most active cathode catalysts, their durability and single‐cell performance are yet to be improved. Herein, self‐supported mesostructured Pt‐based bimetallic (Meso‐PtM; M = Ni, Fe, Co, Cu) nanospheres containing an intermetallic phase are reported, which can combine the beneficial effects of transition metals (M), an intermetallic phase, a 3D interconnected framework, and a mesoporous structure. Meso‐PtM nanospheres show enhanced oxygen reduction reaction (ORR) activity, compared to Pt black and Pt/C catalysts. Notably, Meso‐PtNi containing an intermetallic phase exhibits ultrahigh stability, showing enhanced ORR activity even after 50 000 potential cycles, whereas Pt black and Pt/C undergo dramatic degradation. Importantly, Meso‐PtNi with an intermetallic phase also demonstrated superior activity and durability when used in a PEMFC single‐cell, with record‐high initial mass and specific activities.     

NiMoFe and NiMoFeP as Complementary Electrocatalysts for Efficient Overall Water Splitting and Their Application in PV‐Electrolysis with STH 12.3%

Complementary water splitting electrocatalysts used simultaneously in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can simplify water splitting systems. Herein, earth‐abundant NiMoFe (NMF) and phosphorized NiMoFeP (NMFP) are synthesized as complementary overall water splitting (OWS) catalysts. First, NMF is tested as both the HER and OER promoter, which exhibits low overpotentials of 68 (HER) and 337 mV (OER). A quaternary NMFP is then prepared by simple phosphorization of NMF, which shows a much lower OER overpotential of 286 mV. The enhanced OER activity is attributed to the unique surface/core structure of NMFP. The surface phosphate acts as a proton transport mediator and expedites the rate‐determining step. With the application of OER potential, the NMFP surface is composed of Ni(OH)₂ and FeOOH, active sites for OER, but the inner core consists of Ni, Mo, and Fe metals, serving as a conductive electron pathway. OWS with NMF‐NMFP requires an applied voltage of 1.452 V to generate 10 mA cm^?2, which is one of the lowest values among OWS results with transition‐metal‐based electrocatalysts. Furthermore, the catalysts are combined with tandem perovskite solar cells for photovoltaic (PV)‐electrolysis, producing a high solar‐to‐hydrogen (STH) conversion efficiency of 12.3%.     

Cobalt Covalent Doping in MoS2 to Induce Bifunctionality of Overall Water Splitting

The layer‐structured MoS₂ is a typical hydrogen evolution reaction (HER) electrocatalyst but it possesses poor activity for the oxygen evolution reaction (OER). In this work, a cobalt covalent doping approach capable of inducing HER and OER bifunctionality into MoS₂ for efficient overall water splitting is reported. The results demonstrate that covalently doping cobalt into MoS₂ can lead to dramatically enhanced HER activity while simultaneously inducing remarkable OER activity. The catalyst with optimal cobalt doping density can readily achieve HER and OER onset potentials of ?0.02 and 1.45 V (vs reversible hydrogen electrode (RHE)) in 1.0 m KOH. Importantly, it can deliver high current densities of 10, 100, and 200 mA cm^?2 at low HER and OER overpotentials of 48, 132, 165 mV and 260, 350, 390 mV, respectively. The reported catalyst activation approach can be adapted for bifunctionalization of other transition metal dichalcogenides.     

Vertical Growth of 2D Amorphous FePO4 Nanosheet on Ni Foam: Outer and Inner Structural Design for Superior Water Splitting

Rational design of highly efficient bifunctional electrocatalysts based on 3D transition‐metal‐based materials for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for sustainable energy conversion processes. Herein, a novel strategy involving outer and inner structural engineering is developed for superior water splitting via in situ vertical growth of 2D amorphous FePO₄ nanosheets on Ni foam (Am FePO₄/NF). Careful experiments and density functional theory calculations show that the inner and outer structural engineering contributing to the synergistic effects of 2D morphology, amorphous structure, conductive substrate, and Ni?Fe mixed phosphate lead to superior electrocatalytic activity toward OER and HER. Furthermore, a two‐electrode electrolyzer assembled using Am FePO₄/NF as an electrocatalyst at both electrodes gives current densities of 10 and 100 mA cm^?2 at potentials of 1.54 and 1.72 V, respectively, which is comparable to the best bifunctional electrocatalyst reported in the literature. The strategies, introduced in the present work, may open new opportunities for the rational design of other 3D transition‐metal‐based electrocatalyst through an outer and inner structural control to strengthen the electrocatalytic performance.     

Graphdiyne‐Supported NiCo2S4 Nanowires: A Highly Active and Stable 3D Bifunctional Electrode Material

The oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting are major energy and chemical conversion efforts. Progress in electrocatalytic reactions have shown that the future is limitless in many fields. However, it is urgent to develop efficient electrocatalysts. Here, the first graphdiyne‐supported efficient and bifunctional electrocatalyst is reported using 3D graphdiyne foam as scaffolds, and NiCo₂S₄ nanowires as building blocks (NiCo₂S₄ NW/GDF). NiCo₂S₄ NW/GDF exhibits outstanding catalytic activity and stability toward both OER and HER, as well as overall water splitting in alkaline media. Remarkably, it enables a high‐performance alkaline water electrolyzer with 10 and 20 mA cm^?2 at very low cell voltages of 1.53 and 1.56 V, respectively, and remarkable stability over 140 h of continuous electrolysis operation at 20 mA cm^?2. The results indicate that this catalyst has a bifunction that overcomes all reported bifunctional, nonprecious‐metal‐based ones.     

3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.