Additive-Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles

Direct printing of functional inks onto flexible substrates allows for scalable fabrication of wearable electronics. However, existing ink formulations for inkjet printing require toxic solvents and additives, which make device fabrication more complex, limit substrate compatibility, and hinder device performance. Even water-based carbon or metal nanoparticle inks require supplemental surfactants, binders, and cosolvents to produce jettable colloidal suspensions. Here, a general approach is demonstrated for formulating conductive inkjet printable, additive-free aqueous Ti₃C₂T_x MXene inks for direct printing on various substrates. The rheological properties of the MXene inks are tuned by controlling the Ti₃C₂T_x flake size and concentration. Ti₃C₂T_x-based electrical conduits and microsupercapacitors (MSCs) are printed on textile and paper substrates by optimizing the nozzle geometry for high-resolution inkjet printing. The chemical stability and electrical properties of the printed devices are also studied after storing the devices for six months under ambient conditions. Current collector-free, textile-based MSCs show areal capacitance values up to 294 mF cm⁻² (2 mV s⁻¹) in poly(vinyl alcohol)/sulfuric acid gel electrolyte, surpassing reported printed MXene-based MSCs and inkjet-printed MSCs using other 2D nanomaterials. This work is an important step toward increasing the functional capacity of conductive inks and simplifying the fabrication of wearable textile-based electronics.     

All-MXene-Printed RF Resonators as Wireless Plant Wearable Sensors for In Situ Ethylene Detection

Printed flexible electronics have emerged as versatile functional components of wearable intelligent devices that bridge the digital information networks with biointerfaces. Recent endeavors in plant wearable sensors provide real-time and in situ insights to study phenotyping traits of crops, whereas monitoring of ethylene, the fundamental phytohormone, remains challenging due to the lack of flexible and scalable manufacturing of plant wearable ethylene sensors. Here the all-MXene-printed flexible radio frequency (RF) resonators are presented as plant wearable sensors for wireless ethylene detection. The facile formation of additive-free MXene ink enables rapid, scalable manufacturing of printed electronics, demonstrating decent printing resolution (2.5% variation), ≈30000 S m⁻¹ conductivity and mechanical robustness. Incorporation of MXene-reduced palladium nanoparticles (MXene@PdNPs) facilitates 1.16% ethylene response at 1 ppm with 0.084 ppm limit of detection. The wireless sensor tags are attached on plant organ surfaces for in situ and continuously profiling of plant ethylene emission to inform the key transition of plant biochemistry, potentially extending the application of printed MXene electronics to enable real-time plant hormone monitoring for precision agriculture and food industrial management.     

Versatile Electronic Textile Enabled by a Mixed-Dimensional Assembly Strategy

Electronic textiles (e-textiles) hold great promise for serving as next-generation wearable electronics owing to their inherent flexible, air-permeable, and lightweight characteristics. However, these e-textiles are of limited performance mainly because of lacking powerful materials combination. Herein, a versatile e-textile through a simple, high-efficiency mixed-dimensional assembly of 2D MXene nanosheets and 1D silver nanowires (AgNWs) are presented. The effective complementary actions of MXene and AgNWs endow the e-textiles with superior integrated performances including self-powered pressure sensing, ultrafast joule heating, and highly efficient electromagnetic interference (EMI) shielding. The textile-based self-powered smart sensor systems obtained through the screen-printed assembly of MXene-based supercapacitor and pressure sensor are flexible and lightweight, showing ultrahigh specific capacitance (2390 mF cm⁻²), robust areal energy density (119.5 µWh cm⁻²), excellent sensitivity (474.8 kPa⁻¹), and low detection limit (1 Pa). Furthermore, the interconnected conductive MXene/AgNWs network enables the e-textile with ultrafast temperature response (10.4 °C s⁻¹) and outstanding EMI shielding effectiveness of ≈66.4 dB. Therefore, the proposed mixed-dimensional assembly design creates a multifunctional e-textile that offers a practical paradigm for next-generation smart flexible electronics.     

Micro-Cup Architecture for Printing and Coating Asymmetric 2d-Material-Based Solid-State Supercapacitors

High energy density micro-supercapacitors (MSCs) are in high demand for miniaturized electronics and microsystems. Research efforts today focus on materials development, applied in the planar interdigitated, symmetric electrode architecture. A novel “cup & core” device architecture that allows for printing of asymmetric devices without the need of accurately positioning the second finger electrode here have been introduced. The bottom electrode is either produced by laser ablation of a blade-coated graphene layer or directly screen-printed with graphene inks to create grids with high aspect ratio walls forming an array of “micro-cups”. A quasi-solid-state ionic liquid electrolyte is spray-deposited on the walls; the top electrode material -MXene inks- is then spray-coated to fill the cup structure. The architecture combines the advantages of interdigitated electrodes for facilitated ion-diffusion, which is critical for 2D-material-based energy storage systems by providing vertical interfaces with the layer-by-layer processing of the sandwich geometry. Compared to flat reference devices, volumetric capacitance of printed “micro-cups” MSC increased considerably, while the time constant decreased (by 58%). Importantly, the high energy density (3.99 µWh cm⁻²) of the “micro-cups” MSC is also superior to other reported MXene and graphene-based MSCs.     

3D knitted energy storage textiles using MXene-coated yarns

Textile-based energy storage devices offer an exciting replacement for bulky and uncomfortable batteries in commercial smart garments. Fiber and yarn-based supercapacitors, currently dominating research in this field, have demonstrated excellent performance below ∼4 cm in length, but suffer at longer lengths due to increased resistance. Herein, a new architecture of wearable energy storage devices, 3D knitted supercapacitors, is designed and prototyped with the intention of exploiting the architecture of a knit textile to improve the performance of long yarn electrodes. While Computer-Aided Design (CAD) knitting is a ubiquitous technology for producing textiles, knitted energy storage devices have been largely unexplored due to the need for meters of highly conductive yarn electrodes that meet the strenuous strength and flexibility requirements for CAD knitting. MXenes, a family of solution processable and conductive two-dimensional (2D) materials, have been realized as inks, slurries, pastes, and now dyes for the development of on-paper, on-plastic, and on-textile microsupercapacitor electrodes. In this work, Ti₃C₂T_x MXene was adopted as an active material for coating meters of commercial natural and synthetic yarns, enabling the production of knitted planar microsupercapacitors. The impact on electrochemical performance of knit structure and geometry was systematically studied in an attempt to produce energy storing textiles with power and energy densities that can be used for practical applications. The resulting energy storing textiles demonstrate high capacitance, up to 707 mF cm⁻² and 519 mF cm⁻² at 2 mV s⁻¹ in 1 M H₃PO₄ and PVA-H₃PO₄ gel electrolyte, respectively, and excellent cycling stability over 10,000 cycles. This work represents an important step towards the mass production of MXene-based conductive yarns and 3D knitted energy storage devices and demonstrates how knit structure plays a significant role on device performance.     

Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors

Fiber‐shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one‐step wet‐spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti₃C₂T_x MXene nanosheets and poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm^?1, which is about five times higher than other reported Ti₃C₂T_x MXene‐based fibers (up to ≈290 S cm^?1). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm^?3 at 5 mV s^?1) and an excellent rate performance (≈375.2 F cm^?3 at 1000 mV s^?1). When assembled into a free‐standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm^?3 and ≈8249 mW cm^?3, respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene‐based fiber electrodes and their scalable production for fiber‐based energy storage applications.     

导电油墨及其印刷技术的研究进展

目的 综述导电油墨及其印刷方式的研究进展,为开发价格低廉、性能稳定、导电性优良的导电油墨提供参考。方法 通过查阅文献归纳各类导电油墨的制备方式、印刷方式和应用领域,对导电油墨进行系统分类,比较各类导电油墨的性能和优缺点,并对其印刷技术进行分析,展望了导电油墨的发展前景。结果 目前关于导电油墨的研究集中在纳米银、纳米铜、石墨烯等导电填料的低温烧结油墨,主要采用丝网印刷、喷墨印刷等印刷方式,多用于制备传感器、柔性可穿戴设备等。未来的研究仍需关注如何低成本、低能耗、简单大量地制造导电油墨。结论 导电油墨的制备将与环境友好型的印刷方式相结合,向高导电性、高印刷适性发展,成为印刷电子领域的关键技术。     

Recent Development of Printed Micro-Supercapacitors: Printable Materials,Printing Technologies,and Perspectives

The rapid progression of portable and wearable electronics has necessitated the development of high-performing, miniaturized energy-storage devices with flexible form factors and high energy and power delivery. Printed micro-supercapacitors (MSCs), with in-plane interdigital configurations, is touted as a promising choice to fulfill these requirements. New printing technologies can assemble MSCs with fiscal and environmental benefits, large form factors, and at high throughputs, qualities not afforded with conventional microfabrication technologies. Here, recent progress in the preparation of functional ink systems for wearable MSCs, encompassing electrode materials, conductor materials, and electrolytes, is presented. First, a comprehensive background of the fundamentals of printing technology is introduced, with discussions focusing on methods of improving ink functionality while simultaneously retaining good printability. Second, various printing techniques to ensure manufacturable scaling of wearable MSCs with high areal electrochemical performance and small footprint are explored. Within the scope of these two topics, various issues that hinder the full materialization of widespread adoption of printed MSC and next steps to overcome these issues are discussed. Further deep dives in scientific and technical challenges are also presented, including limited functionality of the inks, low printing resolution, overlay accuracy, and complex encapsulation.     

Rheological properties and screen printability of UV curable conductive ink for flexible and washable E-textiles

As a critical component for the realization of flexible electronics,multifunctional electronic textiles(etextiles)still struggle to achieve controllable printing accuracy,excellent flexibility,decent washability and simple manufacturing.The printing process of conductive ink plays an important role in manufacturing e-textiles and meanwhile is also the main source of printing defects.In this work,we report the preparation of fully flexible and washable textile-based conductive circuits with screen-printing method based on novel-developed UV-curing conductive ink that contains low temperature and fast cure features.This work systematically investigated the correlation between ink formulation,rheological properties,screen printability on fabric substrates,and the electrical properties of the e-textile made thereafter.The rheological behaviors,including the thixotropic behavior and oscillatory stress sweep of the conductive inks was found depending heavily on the polymer to diluent ratio in the formulation.Subsequently,the rheological response of the inks during screen printing showed determining influence to their printability on textile,that the proper control of ink base viscosity,recovery time and storage/loss modulus is key to ensure the uniformity of printed conductive lines and therefore the electrical conductivity of fabricated e-textiles.A formulation with 24 wt%polymer and 10.8 wt%diluent meets all these stringent requirements.The conductive lines with 1.0 mm width showed exceptionally low resistivity of 2.06×10^-5Ωcm Moreover,the conductive lines presented excellent bending tolerance,and there was no significant change in the sample electrical resistance during 10 cycles of washing and drying processes.It is believed that these novel findings and the promising results of the prepared product will provide the basic guideline to the ink formulation design and applications for screen-printing electronics textiles.     

Hybrid 3D Printing of Soft Electronics

Hybrid 3D printing is a new method for producing soft electronics that combines direct ink writing of conductive and dielectric elastomeric materials with automated pick‐and‐place of surface mount electronic components within an integrated additive manufacturing platform. Using this approach, insulating matrix and conductive electrode inks are directly printed in specific layouts. Passive and active electrical components are then integrated to produce the desired electronic circuitry by using an empty nozzle (in vacuum‐on mode) to pick up individual components, place them onto the substrate, and then deposit them (in vacuum‐off mode) in the desired location. The components are then interconnected via printed conductive traces to yield soft electronic devices that may find potential application in wearable electronics, soft robotics, and biomedical devices.     

Scalable Fabrication of Highly Crystalline Organic Semiconductor Thin Film by Channel‐Restricted Screen Printing toward the Low‐Cost Fabrication of High‐Performance Transistor Arrays

Control over the morphology and crystallinity of small‐molecule organic semiconductor (OSC) films is of key importance to enable high‐performance organic optoelectronic devices. However, such control remains particularly challenging for solution‐processed OSC devices because of the complex crystallization kinetics of small‐molecule OSC materials in the dynamic flow of inks. Here, a simple yet effective channel‐restricted screen‐printing method is reported, which uses small‐molecule OSCs/insulating polymer to yield large‐grained small‐molecule OSC thin‐film arrays with good crystallization and preferred orientation. The use of cross‐linked organic polymer banks produces a confinement effect to trigger the outward convective flow at two sides of the channel by the fast solvent evaporation, which imparts the transport of small‐molecule OSC solutes and promotes the growth of small‐molecule OSC crystals parallel to the channel. The small‐molecule OSC thin‐film array produced by screen printing exhibits excellent performance characteristics with an average mobility of 7.94 cm² V^?1 s^?1 and a maximum mobility of 12.10 cm² V^?1 s^?1, which are on par with its single crystal. Finally, screen printing can be carried out using a flexible substrate, with good performance. These demonstrations bring this robust screen‐printing method closer to industrial application and expand its applicability to various flexible electronics.     

Printable Fabrication of Nanocoral‐Structured Electrodes for High‐Performance Flexible and Planar Supercapacitor with Artistic Design

Planar supercapacitors with high flexibility, desirable operation safety, and high performance are considered as attractive candidates to serve as energy‐storage devices for portable and wearable electronics. Here, a scalable and printable technique is adopted to construct novel and unique hierarchical nanocoral structures as the interdigitated electrodes on flexible substrates. The as‐fabricated flexible all‐solid‐state planar supercapacitors with nanocoral structures achieve areal capacitance up to 52.9 mF cm^?2, which is 2.5 times that of devices without nanocoral structures, and this figure‐of‐merit is among the highest in the literature for the same category of devices. More interestingly, due to utilization of the inkjet‐printing technique, excellent versatility on electrode‐pattern artistic design is achieved. Particularly, working supercapacitors with artistically designed patterns are demonstrated. Meanwhile, the high scalability of such a printable method is also demonstrated by fabrication of large‐sized artistic supercapacitors serving as energy‐storage devices in a wearable self‐powered system as a proof of concept.     

A Solid‐State Fibriform Supercapacitor Boosted by Host–Guest Hybridization between the Carbon Nanotube Scaffold and MXene Nanosheets

Fiber‐shaped supercapacitors with improved specific capacitance and high rate capability are a promising candidate as power supply for smart textiles. However, the synergistic interaction between conductive filaments and active nanomaterials remains a crucial challenge, especially when hydrothermal or electrochemical deposition is used to produce a core (fiber)–shell (active materials) fibrous structure. On the other hand, although 2D pseudocapacitive materials, e.g., Ti₃C₂T _x (MXene), have demonstrated high volumetric capacitance, high electrical conductivity, and hydrophilic characteristics, MXene‐based electrodes normally suffer from poor rate capability owing to the sheet restacking especially when the loading level is high and solid‐state gel is used as electrolyte. Herein, by hosting MXene nanosheets (Ti₃C₂T _x ) in the corridor of a scrolled carbon nanotube (CNT) scaffold, a MXene/CNT fiber with helical structure is successfully fabricated. These features offer open spaces for rapid ion diffusion and guarantee fast electron transport. The solid‐state supercapacitor based on such hybrid fibers with gel electrolyte coating exhibits a volumetric capacitance of 22.7 F cm⁻³ at 0.1 A cm⁻³ with capacitance retention of 84% at current density of 1.0 A cm⁻³ (19.1 F cm⁻³), improved volumetric energy density of 2.55 mWh cm⁻³ at the power density of 45.9 mW cm⁻³, and excellent mechanical robustness.     

Multifunctional MoSe2@MXene Heterostructure-Decorated Cellulose Fabric for Wearable Thermal Therapy

A booming demand for wearable electronic devices urges the development of multifunctional smart fabrics. However, it is still facing a challenge to fabricate multifunctional smart fabrics with satisfactory mechanical property, excellent Joule heating performance, highly efficient photothermal conversion, outstanding electromagnetic shielding effectiveness, and superior anti-bacterial capability. Here, a MoSe₂@MXene heterostructure-based multifunctional cellulose fabric is fabricated by depositing MXene nanosheets onto cellulose fabric followed by a facile hydrothermal method to grow MoSe₂ nanoflakes on MXene layers. A low-voltage Joule heating therapy platform with rapid Joule heating response (up to 230 °C in 25 s at a supplied voltage of 4 V) and stable performance under repeated bending cycles (up to 1000 cycles) is realized. Besides, the multifunctional fabric also exhibits excellent photothermal performance (up to 130 °C upon irradiation for 25 s with a light intensity of 400 mW cm⁻²), outstanding electromagnetic interference shielding effectiveness (37 dB), and excellent antibacterial performances (>90% anti-bacterial rate toward Escherichia coli, Bacillus subtilis, and Staphylococcus aureus). This work offers an efficient avenue to fabricate multifunctional wearable thermal therapy devices for mobile healthcare and personal thermal management.     

Stable and Biocompatible Carbon Nanotube Ink Mediated by Silk Protein for Printed Electronics

Ink-based processes, which enable scalable fabrication of flexible devices based on nanomaterials, are one of the practical approaches for the production of wearable electronics. However, carbon nanotubes (CNTs), which possess great potential for flexible electronics, are facing challenges for use in inks due to their low dispersity in most solvents and suspicious cytotoxicity. Here, a stable and biocompatible CNT ink, which is stabilized by sustainable silk sericin and free from any artificial chemicals, is reported. The ink shows stability up to months, which can be attributed to the formation of sericin–CNT (SSCNT) hybrid through non-covalent interactions. It is demonstrated that the SSCNT ink can be used for fabricating versatile circuits on textile, paper, and plastic films through various techniques. As proofs of concept, electrocardiogram electrodes, breath sensors, and electrochemical sensors for monitoring human health and activity are fabricated, demonstrating the great potential of the SSCNT ink for smart wearables.     

Washable,stretchable, and reusable core–shell metal nanowire network-based electronics on a breathable polymer nanomesh substrate

Polymer nanofiber-based porous structures, referred to as “breathable devices,” have been recently developed to minimize user discomfort. Although these devices enable conformal integration to the skin with gas permeability, their performance and durability are significantly lower than those of conventional film-based devices. In this study, an ultradurable embedded Ag–Au core–shell nanowire network (AANN) on a nanomesh substrate is fabricated using the intense pulsed light irradiation and electroplating (IPL-EP) process. The AANN is designed to achieve breathability and durability without sacrificing device performance. It can be used in breathable nanomesh electronics and exhibits a low sheet resistance (1.4 Ω sq⁻¹), cycle stability (above 20,000 cycles), stability in chemicals (water-based solutions and highly corrosive H₂O₂ solution), washability (20 washings), and reusability. Additionally, it is used in reusable conductive electronic textiles, and its applications as a reusable strain sensor for motion detection and wearable heater for thermal therapy are demonstrated. Furthermore, the AANN-based conductive thread exhibits excellent electrical performance (0.3 Ω cm⁻¹) with durability and maintains its electrical characteristics after 50 wash cycles. The proposed process can enable large-scale fabrication of highly durable breathable electronics, electronic textiles, and other biomedical devices.     

Perspectives on solution processing of two-dimensional MXenes

Since the discovery of two-dimensional (2D) transition metal carbides and nitrides, known as MXenes, research on these wonder 2D inorganic compounds has become increasingly intensified with their members quickly expanding. MXenes' state-of-the-art applications are heavily dependent on their processing strategies and manufacturing methods. Nevertheless, the solution processing of MXenes has not been comprehensively reviewed. This review summarizes progress regarding solution processing of MXenes over the past decade as well as outlines key perspectives for future scalable manufacturing strategies. Etching of MAX phases and delamination of MXene are briefly introduced. Rheological properties of MXene dispersions and wetting of the MXene inks, which are crucial for the achievement of high-resolution printing and homogeneous coating, are discussed in detail. We have discussed the ink formulation strategies and fine-tuning of the ink properties to match with that of the targeted substrates to yield efficient yet high-quality printed/coated films/structures. As such, we demonstrate a “map of guidelines” for solution-based processing of MXenes toward high-performance applications, such as electrochemical energy storage, conductive electrodes, electromagnetic interference shielding, and so on.     

Scalable Manufacturing of Free-Standing,Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Free-standing films that display high strength and high electrical conductivity are critical for flexible electronics, such as electromagnetic interference (EMI) shielding coatings and current collectors for batteries and supercapacitors. 2D Ti₃C₂T_x flakes are ideal candidates for making conductive films due to their high strength and metallic conductivity. It is, however, challenging to transfer those outstanding properties of single MXene flakes to macroscale films as a result of the small flake size and relatively poor flake alignment that occurs during solution-based processing. Here, a scalable method is shown for the fabrication of strong and highly conducting pure MXene films containing highly aligned large MXene flakes. These films demonstrate record tensile strength up to ≈570 MPa for a 940 nm thick film and electrical conductivity of ≈15 100 S cm⁻¹ for a 214 nm thick film, which are both the highest values compared to previously reported pure Ti₃C₂T_x films. These films also exhibit outstanding EMI shielding performance (≈50 dB for a 940 nm thick film) that exceeds other synthetic materials with comparable thickness. MXene films with aligned flakes provide an effective route for producing large-area, high-strength, and high-electrical-conductivity MXene-based films for future electronic applications.     

Self-Powered Integrated Sensing System with In-Plane Micro-Supercapacitors for Wearable Electronics

Self-powered integrated sensor with high-sensitivity physiological signals detection is indispensable for next-generation wearable electronic devices. Herein, a Ti₃C₂T_x/CNTs-based self-powered resistive sensor with solar cells and in-plane micro-supercapacitors (MSCs) is successfully realized on a flexible styrene–ethylene/butylene–styrene (SEBS) electrospinning film. The prepared Ti₃C₂T_x/CNTs@SEBS/CNTs nanofiber membranes exhibit high electrical conductivity and mechanical flexibility. The laser-assisted fabricated Ti₃C₂T_x/CNTs based-MSCs demonstrate a high areal energy density of 52.89 and 9.56 µWh cm⁻² with a corresponding areal power density of 0.2 and 4 mW cm⁻². Additionally, the MSCs exhibit remarkable capacity retention of 90.62% after 10 000 cycles. Furthermore, the Ti₃C₂T_x/CNTs based-sensor exhibits real-time detection capability for human facial micro-expressions and pulse single under physiological conditions. The repeated bending/release tests indicate the long-time cycle stability of the Ti₃C₂T_x/CNTs based-sensor. Owing to the excellent sensing performance, the sensing array was also fabricated. It is believed that this work develops a route for designing a self-powered sensor system with flexible production, high performance, and human-friendly characteristics for wearable electronics.