Fabrication of high mechanical performance UHMWPE nanocomposites with high-loading multiwalled carbon nanotubes

Using conventional mixing techniques, the mechanical properties of prepared carbon nanotube (CNT)/polymer composites are not impressive enough, because of their aggregation problem at a high loading of CNTs. In this article, high mechanical performance ultrahigh molecular weight polyethylene (UHMWPE) nanocomposites with high loading of multiwalled CNTs were successfully fabricated by a new manufacturing technique. Specifically, the tensile strength and storage modulus at 25 °C of UHMWPE nanocomposites with 32 wt % of nanotubes prepared by the novel technique reaches 107.6 MPa and 6.0 GPa, respectively, about 4.7 times and 5.0 times of that of pure UHMWPE resin, which are also very high experimental results compared with polyethylene nanocomposite prepared by traditional hot-compression techniques. These attractive results suggest that the high-loading CNTs without sacrificing their dispersion and the impregnation quality of polymer-impregnated buckypapers are essential for fabricating CNTs/polymer composites with superior mechanical properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48667.     

Influence of crystallinity and chain interactions on the electrical properties of polyamides/carbon nanotubes nanocomposites

This work evaluates the effects of the crystallinity degree and π–π interactions between nanoparticles and a polymeric matrix on the electrical properties of polyamides and carbon nanotubes (CNT) nanocomposites. Two polymeric matrices were chosen; polyamide (PA) 6.6, a semi-crystalline polymer, and PA 6I-6T (here called aPA), a semi-aromatic and amorphous polyamide. The PA 6.6 crystallinity degree did not significantly change. Both lamellar thicknesses, amorphous (L_a) and crystalline (L_c), were estimated through Small-angle X-ray scattering. L_a increased significantly when CNTs were added. Both nanocomposites presented almost the same percolation threshold. In aPA nanocomposites, the π–π interaction between aromatic groups of CNTs and aPA is not only responsible for a homogeneous CNT dispersion, but also creates a direct path, parallel to the electrodes, for electron conduction after the percolation limit. In the PA 6.6 nanocomposites, the CNTs preferably disperse in the amorphous regions, forming a conductive network.     

Mechanical properties of carbon fiber reinforced bisphenol A dicyanate ester composites modified with multiwalled carbon nanotubes

A novel electrophoretic deposition (EPD) method was employed for grafting multiwalled carbon nanotubes (MWCNTs) on carbon fibers, which, after impregnation with bisphenol A dicyanate ester (BADCy), synergistically reinforced BADCy matrix composites (CNT‐C/BADCy). The effect of MWCNT presence on the mechanical properties of the composites was investigated. Composite tensile strength increased by 45.2% for an EPD duration of 2 min, while flexural strength exhibited a decreasing trend with EPD duration. Optical microscopy revealed that the existence of MWCNTs enhanced the fiber‐matrix interface while a large number of CNTs were observed to have pulled‐out from the matrix, a finding which explained the observed tensile strength increase in terms of energy dissipation by the specific toughening mechanism. The flexural strength decrease of the composites with CNTs as compared to specimens without nanotubes was found linked to the increased stress concentration in the BADCy matrix due to tube presence which weakens the adhesion between carbon fabrics. In a word, carbon nanotubes will enhance the micro interface and weaken the macro interface of the composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45100.     

Quantification of carbon nanotube dispersion and its correlation with mechanical and thermal properties of epoxy nanocomposites

An experimental study is carried out to quantitatively assess the dispersion quality of carbon nanotubes (CNTs) in epoxy matrix as a function of CNT variant and weight fraction. To this end, two weight fractions (0.05% and 0.25%) of as-grown, oxidized, and functionalized CNTs are used to process CNT/epoxy nanocomposites. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared analysis of different variants of CNTs are used to establish the efficiency of purification route. While the relative change in mechanical properties is investigated through tensile and micro-hardness testing, thermal conductivity of different nanocomposites is measured to characterize the effect of CNT addition on the average thermal properties of epoxy. Later on, a quantitative analysis is carried out to establish the relationship between the observed improvements in average composite properties with the dispersion quality of CNTs in epoxy. It is shown that carboxylic (-COOH) functionalization reduces the average CNT agglomerate size and thus ensures better dispersion of CNTs in epoxy even at higher CNT weight fraction. The improved dispersion leads to enhanced interfacial interaction at the CNT/epoxy interface and hence provides higher relative improvement in nanocomposite properties compared to the samples prepared using as-grown and oxidized CNTs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48879.     

Novel method of dispersion of multiwalled carbon nanotubes in a flexible epoxy matrix

We describe a simple and novel method for dispersing multiwalled carbon nanotubes (MWCNTs) in a flexible epoxy matrix. The MWCNTs were modified with half‐neutralized dicarboxylic acids having different numbers of carbon atoms. The modified MWCNTs were prereacted with epoxy in the presence of triphenylphosphine. The dispersion of the MWCNTs and the enhancement in the tensile properties were found to be better for composites prepared with a solvent. Among the half‐neutralized dicarboxylic acids used, half‐neutralized adipic acid (HNAA) exhibited the best performance. Scanning electron microscopy and transmission electron microscopy studies clearly indicated an improvement in the level of dispersion of the MWCNTs with the addition of the modifier. The good dispersion of the MWCNTs and the resulting improvement in their properties were attributed to the cation–π interactions (the cation of HNAA and the π‐electron clouds of the MWCNTs) between the HNAA and MWCNTs and the chemical bonding of ? COOH groups of HNAA and the epoxy resin. The cation–π interaction and chemical bonding was assessed with Fourier transform infrared spectroscopy and Raman spectroscopy. This approach did not destroy the π–electron clouds of the MWCNTs in contrast to a chemical functionalization strategy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2610–2618, 2013     

Synergetic effects on the mechanical and fracture properties of epoxy composites with multiscale reinforcements: Carbon nanotubes and short carbon fibers

The ball‐milling/liquid‐phase oxidation (BMLPO) method was used to fabricate surface‐modified short carbon fibers (SCFs). Multiscale epoxy composites reinforced with a combination of SCFs and multiwalled carbon nanotubes (MWNTs) were prepared. Atomic force microscopy observations and contact angle measurement were used to investigate the modification effect of the BMLPO method. Mechanical tests and scanning electron microscopy observations were used to study the effects of the SCFs, MWNTs, and their combination on tensile properties, impact strength, and fracture toughness of the epoxy composites. The results show that the surface roughness of the SCFs after BMLPO treatment increased, and the wettability of the SCFs was improved as well. The combined use of the SCFs and MWNTs had a synergetic effect on the tensile strength, fracture toughness, and impact strength of the epoxy composites. The addition of MWNTs promoted the plastic deformation of the epoxy matrix and decreased the stress‐concentration level near the SCF/matrix interface; these were considered the main causes of the synergetic effect. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43500.     

A liquid‐like multiwalled carbon nanotube derivative and its epoxy nanocomposites

Multiwall carbon nanotubes (MWCNTs) with liquid‐like behavior at room temperature were prepared with sulfonic acid terminated organosilanes as corona and tertiary amine as canopy. The liquid‐like MWCNT derivative had low viscosity at room temperature (3.89 Pa s at 20°C) and exhibited non‐Newtonian shear‐thinning behavior. The weight fraction of MWCNT in the derivative was 16.72%. The MWCNT derivative showed very good dispersion in organic solvents, such as ethanol and acetone. The liquid‐like MWCNT derivative was incorporated into epoxy matrix to investigate the mechanical performance of the nanocomposites and the distribution of MWCNTs in the matrix. When the liquid‐like MWCNT derivative content was up to 1 wt %, the flexural strength and impact toughness of composites were 12.1 and 124% higher than the pure epoxy matrix, respectively. Transmission electron microscope (TEM) confirmed the very good dispersion of the liquid‐like MWCNT derivative in epoxy matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2217–2224, 2013     

Effects of electrophoretic deposition process parameters on the mechanical properties of graphene carboxyl-grafted carbon fiber reinforced polymer composite

Carbon fiber (CF) modification by grafting of various graphene-based nanofillers (GBN) by electrophoretic deposition (EPD) technique was proven to be a successful technique to enhance the out-of-plane performance of carbon fiber reinforced polymer (CFRP) composites. Graphene carboxyl (G-COOH) grafting on carbon fiber by electrophoretic deposition (EPD) is a promising technique to improve the mechanical properties of CFRP composites. To our knowledge, there is a dearth of literature available on the effect of EPD process parameters on the mechanical behavior of modified CFRP composites. The aim of this study is to evaluate the effect of nanofiller concentration in the suspension, applied current, and the time of deposition during EPD on the mechanical behavior of nanophase CFRP composites, thus making it a novel work. With increasing concentration, interlaminar shear strength (ILSS) improved consistently and has shown a maximum enhancement of 24.7% than that of neat CFRP composite at 1.5 g/L nanofiller concentration, whereas flexural strength remained almost unaffected with varying concentration. On the contrary, variation of deposition current has affected the flexural strength but not ILSS. The maximum flexural strength was obtained at a deposition current of 5.0A with an improvement of 16.3% in comparison with neat CFRP samples. However, both flexural strength and ILSS of hybrid CFRP composites have shown improvement with increasing deposition time. At 60 min of deposition, ILSS and flexural strength have shown maximum improvements of 35.0 and 26.6%, respectively, when compared to control specimen. After evaluating the effect of process parameters future scope of the work involves the optimization of parameters for EPD of G-COOH. Fractographic analysis of the fractured samples was performed using scanning electron microscope (SEM) to apprehend prominent failure mechanisms. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48925.     

Functionalization of carbon nanotubes with (3‐glycidyloxypropyl)‐trimethoxysilane: Effect of wrapping on epoxy matrix nanocomposites

In this work, multiwalled carbon nanotubes (MWCNT), after previous oxidation, are functionalized with excess (3‐glycidyloxypropyl)trimethoxysilane (GLYMO) and used as reinforcement in epoxy matrix nanocomposites. Infrared, Raman, and energy‐dispersive X‐ray spectroscopies confirm the silanization of the MWCNT, while transmission electron microscopy images show that oxidized nanotubes presented less entanglement than pristine and silanized MWCNT. Thickening of the nanotubes is also observed after silanization, suggesting that the MWCNT are wrapped by siloxane chains. Field‐emission scanning electron microscopy reveals that oxidized nanotubes are better dispersed in the matrix, providing nanocomposites with better mechanical properties than those reinforced with pristine and silanized MWCNT. On the other hand, the glass transition temperature of the nanocomposite with 0.05 wt % MWCNT‐GLYMO increased by 14 °C compared to the neat epoxy resin, suggesting a strong matrix–nanotube adhesion. The functionalization of nanotubes using an excess amount of silane can thus favor the formation of an organosiloxane coating on the MWCNT, preventing its dispersion and contributing to poor mechanical properties of epoxy nanocomposites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44245.     

The role of the interphase on the shear induced failure of multiwall carbon nanotubes reinforced epoxy nanocomposites

Multiwall Carbon Nanotubes (MWCNT) with an elevated aspect ratio were chemically functionalized with amines and two types of epoxide groups. Thermogravimetric analysis and Fourier Transform‐Infrared Spectroscopy (FTIR) analysis corroborated that the functionalization degree was substantial (up to 30 wt %) and the presence of a covalent bond with the MWCNT. The functionalized MWCNT (f‐CNT) were incorporated into an epoxy matrix after its dispersion in the diglycidyl ether of bisphenol A (DGEBA) precursor. To induce a shear failure mode, a short‐beam (SB) experimental setup was implemented. The SB shear strength (SBSS) proved that the functionalization had a strong influence on its value. For the case of pristine CNT, a neutral effect was obtained. A strong detrimental effect (?17.2% ± 9.5) was measured for the amine type f‐CNT and a positive effect (up to 10.9% ± 8.9) was measured of the epoxide type f‐CNT. Fractographic analysis of each formulation was correlated with SBSS performance, proving that the surface texture of the fractured samples was strongly correlated to its value. Furthermore, dynamic mechanical analysis proved that the damping factor and the crosslink molecular weight were correlated with the SBSS performance. A lower full width at half maximum of the damping factor was associated to an improvement of SBSS. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41364.     

High-performance sodium polyacrylate nanocomposites developed by using ionic liquid covalently modified multiwalled carbon nanotubes

Ionic liquids grafted with multiwalled-nanotubes (CNT Br/NTf₂), involving hydrophilic bromide salt and hydrophobic bis(trifluoromethanesulphonyl)imide salt, were prepared by amidation, followed by an easy solution-casting method of blending CNT Br/NTf₂ with sodium polyacrylate (PAA) as well as crosslinking agent (XR-100) to form PAA hybrid nanocomposites. The uniform dispersion of CNT Br/NTf₂ were analyzed by TEM. The defects and physical properties of fillers were characterized by Raman spectroscopy, Contact angle test, and TGA. Furthermore, microstructures of hybrid nanocomposites were characterized by SEM, from which it can be found that fillers were homogeneously distributed in the PAA matrix. CNT Br/NTf₂ significantly improved the mechanical properties and tensile fatigue resistance, as well as offered tunable swelling behavior of PAA nanocomposites without wasting too much of thermal stability. This study offers a simple approach to develop multifunctional materials based on ionic liquids covalently modified MWCNTs PAA nanocomposites.     

Structure and electrically conductive properties of porous PAN-based nanocomposites prepared by Pickering emulsion template method

A carbon nanohybrid Pickering stabilizer was synthesized by the hydrothermal reaction of 2-ethyl-4-methylimidazole (EMI), graphene oxide (GO), and carbon nanotubes (CNTs). A water-in-oil (w/o) type Pickering emulsion was achieved using the mixed carbon nanohybrids/Span 80 to form a porous and conductive polyacrylonitrile (PAN) nanocomposites after polymerization. Contact angle and X-ray photoelectron spectroscopy (XPS) results show that the carbon nanohybrid stabilizer is amphiphilic. The effects of the composition and concentration of stabilizers were investigated. When the concentration of the carbon nanohybrid stabilizer is 4 mg ml⁻¹, the conductivity of the resulting material is 2.31 × 10⁻⁹ S m⁻¹, which is six orders of magnitude higher than that of porous PAN composites without carbon nanohybrid stabilizer. At the mass ratio of 6GO:1CNTs, the conductivity of porous PAN-based composites reaches 2.47 × 10⁻⁸ S m⁻¹. The significantly increased conductivity is the evidence for the three dimensional conductive network constructed by carbon nanohybrid stabilizer at the oil/water interface.     

Effect of low‐content carbon nanotubes on the dielectric and microwave absorption properties of graphite/polymer nanocomposites

Honeycomb cores (HCs) coated with graphite and multiwalled carbon nanotubes (MWCNTs) filled in a thermoplastic resin are proposed as microwave absorbers. The MWCNT contents varied from 0.2 to 0.6 wt % in a graphite‐filled (15 wt %) thermoplastic resin. The HCs were coated with three different types of coating materials for the sake of comparison: graphite, MWCNTs, and graphite plus MWCNTs. The dielectric properties [the real and imaginary parts of complex permittivity (ε′ and ε″, respectively)] and reflection loss (RL) of all of the coated HCs were measured and compared. We observed that the permittivities and RL increased significantly with increased weight percentage of the MWCNTs in the graphite‐filled thermoplastic resin. The RL measurements showed a maximum loss of ?20 dB around 7 GHz and a bandwidth of 2.7 GHz at ?10 dB in the HCs coated with the 0.4 wt % MWCNT plus graphite. There was also a shift in the RL peak position from the x band to the c band after the increase of MWCNT content. We also observed from the measurements that a combination of graphite and MWCNTs resulted in a broadband microwave absorber; a bandwidth of 13 GHz was observed for 80% RL when the MWCNT content increased to 0.6 wt % in the graphite‐incorporated resin. The possible mechanism that increased RL with the incorporation of MWCNTs in the graphite‐mixed thermoplastic resin is discussed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40891.     

Tailoring in thermomechanical properties of ethylene propylene diene monomer elastomer with silane functionalized multiwalled carbon nanotubes

The incorporation of silane treated multiwalled carbon nanotubes (S‐MWCNTs) is used as an effective path for tailoring thermomechanical properties of ethylene propylene diene monomer (EPDM). In this study, S‐MWCNTs were introduced into EPDM using internal dispersion kneader and two roller mixing mill. By altering the mass ratio of S‐MWCNTs from 0 to 1, thermal conductivity, thermal stability and phase transition temperatures and their respective enthalpies are discussed of the fabricated nanocomposites. It is observed that silane modification improves their dispersion and increases the interfacial bonding between MWCNTs and polymer matrix. Scanning electron microscopy along energy dispersive spectroscopy analysis is performed to confirm the silane functionalized MWCNTs are selectively distributed in the host polymer. More importantly, an important increase in mechanical properties like ultimate tensile strength and hardness is achieved through introducing silane functionalized MWCNTs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43221.     

Preparation and characterization of P(AN‐co‐VA‐co‐DEMA) fibers coated with multiwalled carbon nanotubes by electrostatic interactions

P(AN‐co‐VA‐co‐DEMA) terpolymers were synthesized by aqueous precipitation copolymerization of acrylonitrile (AN), vinyl acetate (VA), and 2‐dimethylamino ethyl methacrylate (DEMA) with an Na₂S₂O₅–NaClO₃ redox initiating system and fibers from these terpolymers were thus prepared by a wet spinning method. Functionalized multiwalled carbon nanotube (F‐MWNT) networks were created on the surface of P(AN‐co‐VA‐co‐DEMA) fibers by a simple dipping method. The morphology and interfacial interactions of the obtained F‐MWNTs‐coated fibers were characterized by scanning electron microscope, Raman spectroscopy, and Fourier transform infrared spectroscopy. The results showed that F‐MWNTs were assembled on the fibers and the density of F‐MWNTs can be controlled by adjusting the F‐MWNTs content in the dipping solution. The assembly process was driven by electrostatic interactions between the negative charges on the nanotube sidewalls and the positive charges of the fibers. The F‐MWNTs‐coated fibers had a good conductivity. The volume resistivity of the fibers coated with 1.18 wt % F‐MWNTs reached 0.27 Ω·cm, while the original mechanical properties were preserved. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42545.     

Microwave curing of epoxy polymers reinforced with carbon nanotubes

The driver for this study is the observation that heating of carbon nanotubes (CNTs) with electromagnetic field can offer a more efficient and cost‐effective alternative in heat transfer for the production of composites. The idea of this study is twofold; CNT can work as microwave (MW) radiation susceptors and they can act as nanoreinforcements in the final system. To test these assumptions, a household oven was modified to control the curing schedule. Polymers with different CNT concentrations were prepared (0.5 and 1.0 wt %). The dispersion of the CNTs in the epoxy was achieved using shear‐mixing dissolver technique. MW and conventionally cured specimens were also produced in a convection oven for reference. Thermal and mechanical tests were used as control point. A curing schedule investigation was further performed to quantify the energy and time‐saving capabilities using CNT and MWs. The presence of CNTs into epoxy matrix has been proven beneficial for the shortening of the curing time. MW‐cured composites showed the same degree of polymerization with the conventionally cured composites in a shorter time period and this time was reduced as the CNT concentration was increased. A good distribution of the CNT is required to avoid hot spot effects and local degradation. Mechanical performance was, in some cases, favored by the use of CNT. The benefit from the use of MWs and CNT could reach at least 40% in terms of energy needed and time without sacrificing mechanical performance. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Controlled dispersion of multiwalled carbon nanotubes modified by hyperbranched polylysine

Hyperbranched polymers have been found effective in controlling the dispersibility of carbon nanotubes in aqueous solutions. In this study, hyperbranched polylysine (HBPL) was synthesized using lysine and N,N′‐methylenebisacrylamide as precursors via Michael addition. The HBPL then was used to noncovalently modify multiwalled carbon nanotubes (MWCNTs) to prepare MWCNTs‐HBPL. The obtained MWCNTs‐HBPL composites were characterized using FTIR spectroscopy, Raman spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results showed that the HBPL was successfully attached to the surface of MWCNTs via noncovalent interactions. The dispersibility of the MWCNTs‐HBPL composites in aqueous solutions was investigated using digital photographs, ultraviolet–visible absorption spectroscopy, and zeta potential measurements. The results demonstrated that both the mass ratio of MWCNT to HBPL and the pH of the solution had a significant impact on the dispersibility of the MWCNTs/HBPL solution, suggesting that HBPL treatment is an effective method of controlling the dispersibility of MWCNTs in aqueous solutions. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46249.     

Flame retardancy and mechanical properties of ferrum ammonium phosphate–halloysite/epoxy polymer nanocomposites

To recycle the nitrogen (N) and phosphorus (P) from wastewater, ferrum ammonium phosphate (FAP)–halloysite nanotubes (HNTs) were synthesized with simulated wastewater containing N, P, and Fe pollutants as raw materials. The adsorption–chemical precipitation in situ method was used to synthesize the target products, and the optimal conditions for the synthesis of the FAP–HNTs were obtained. Fourier transform Infrared (FTIR) spectroscopy, energy‐dispersive spectroscopy (EDS), scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis were conducted to characterize the samples. The FAP particle size was 20–30 nm in the FAP–HNTs. The FTIR spectra demonstrated that a small amount of water in the FAP–HNTs promoted the curing reaction. The FAP–HNTs and Exolit OP 1230 (OP) were introduced into epoxy (EP) to prepare the polymer nanocomposites. The heat release rate (HRR) and flammability of the EP composites were tested by microscale combustion calorimetry and UL‐94 instruments. The mechanical properties of the EP composites also were tested by a tension testing system. The results indicate that the flame retardancy and mechanical properties of the EP composites were improved by FAP–HNT. The addition of FAP–HNT and OP gave rise to an evident reduction of HRR and a prolonged burning time for the EP. EP/FAP–HNT/OP (20) (where 20 is the loading weight percentage) passed the UL 94 V‐0 rating. The analysis of the char revealed the synergy of the FAP–HNTs and OP in reducing the flammability of the polymers. We concluded that these polymers show potential for applications in wastewater treatment and N/P recycling. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41681.     

Electrically conductive polycarbonate/ethylene‐propylene copolymer/multi‐walled carbon nanotubes nanocomposites with improved mechanical properties

In this article, the effect of Multi‐walled carbon nanotubes (MWCNTs) on the electrical conductivity and mechanical properties of polycarbonate (PC) toughened with cross‐linked ethylene‐propylene copolymer (EPC) was investigated. The solubility parameters of the PC and EPC were calculated using Hoy methods to clarify the miscibility of the polymer blends. It could be concluded that in the cooled state, the blends form a heterogeneous structure with two separate phases. The tensile, flexural, impact toughness properties of the PC/EPC blend and PC/EPC/MWCNT nanocomposites were carried out to illuminate the optimum concentration of polymer blends and MWCNTs. The 335% increment for the impact strength results appeared with combination of 10% EPC in the PC matrix. The flexural modulus and strength of PC/EPC blend increased by 75.1% and 59.1%, respectively. The Nielsen model was performed to fit the best curve of theoretical simulation to experimental results for elastomeric dispersed in the plastic matrix. Halpin‐Tsai model was applied to estimate the stiffness of nanocomposites blends with different volume fraction and aspect ratio of MWCNTs in the PC/EPC blends. Finally, in the presence of MWCNTs, all nanocomposite samples were semi‐conducting and the percolation threshold of the PC/EPC (10%) blends was between 0.5% and 1.0% MWCNTs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44661.     

Influence of preparation methods on the electrical and nanomechanical properties of poly(methyl methacrylate)/multiwalled carbon nanotubes composites

Poly(methyl methacrylate)/multiwalled carbon nanotubes (PMMA/MWCNT) composites were prepared by two different methods: melt mixing and solution casting. For solution casting, two different solvents, toluene and chloroform, were used to prepare PMMA solutions with different concentrations of MWCNT. The dispersion of the CNT in the composite samples was verified by scanning electron microscopy. For the nanocomposites prepared by both methods, the electrical conductivity increased with increasing filler content, showing typical percolation behavior. In addition, an increase of 11 orders of magnitude in the electrical conductivity relative to the matrix conductivity was determined by broadband dielectric spectroscopy and four probe conductivity measurements. A maximum value of σ_DC ～ 1.6 S/cm was found for the highest filler loaded sample (3.67 vol %), which was prepared by solution casting from toluene. Nanoindentation analysis was used to characterize the surface mechanical properties of the composite samples prepared by the different methods. Indentation tests were performed at various penetration depths, and it was revealed that the melt mixing process resulted in stiffer neat PMMA samples compared to the solution casted PMMA samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41721.