Signal and interference statistics of a CDMA system with feedbackpower control

Power control is essential in the use of direct-sequence code-division multiple-access (CDMA) techniques over fading radio channels. The paper investigates a feedback power control approach that allows power commands to be updated at a higher rate than the rate of multipath fading. The signal and interference statistics as received at the base stations after power control are obtained for a simulated CDMA system which includes multiple base stations with diversity receivers and a large number of power-controlled users continuously moving at various speeds. The authors show that often-used analyses based on perfect average power control lead to optimistic capacity results (by about 25%) because interference is underestimated by as much as 1 dB     

Uplink channel assignment with balanced load for code division multiple access cellular systems

In a code division multiple access (CDMA) wireless communication system, each mobile handset must be power controlled such that the power received at the base station is roughly the same. Otherwise, the interferences between mobile handsets will degrade the performance and increase the error rate. When a mobile handset uses channels from the neighbouring cells, it will raise its power to meet the threshold of signal strength. This will also increase the interference in the home cell. Therefore, we do not want a mobile handset to use channels from other cells blindly. In this paper, we propose an uplink channel assignment method based on the directed retry concept for CDMA cellular systems. The purpose is to achieve load balancing between neighbouring cells and at the same time controlling the interference levels at the base stations such that it will not affect the performance. Furthermore, priorities are given to handoff calls when assigning channels. Copyright © 2002 John Wiley & Sons, Ltd.     

Open-loop power control error in a land mobile satellite system

In order to combat large scale shadowing and distance losses in a land mobile satellite system, an adaptive power control (APC) scheme is essential. Such a scheme, implemented on the uplink ensures that all users' signals arrive at the base station with equal average power as they move within the satellite spot beam-an important requirement in a CDMA system. Because of the lengthy round-trip delay on a satellite link, closed-loop power control systems are only of marginal benefit. Therefore, an open-loop APC scheme is proposed to counteract the effects of shadowing and distance loss. A fairly general channel model, consisting of log-normal shadowing and Rician fading, is assumed. This can be applied to a specific two-state land mobile satellite channel model, involving shadowed intervals with Rayleigh fading and unshadowed intervals with Rician fading. It is found that the power control error can be approximated by a log-normally distributed random variable. To quantify the performance of the APC, the standard deviation of the power control error in decibels is analyzed as a function of the specular power-to-scatter power ratio, the measurement time and the vehicle velocity. To illustrate the usefulness of the results, we analyze the effect of the power control error on the system capacity of a CDMA mobile satellite link     

Distributed power control algorithms for asynchronous CDMA systems in frequency-selective fading channels

In Code Division Multiple Access (CDMA) radio environments, the maximum number of supportable users per cell is limited by multipath fading, shadowing, multiple access interference and near-far effects which cause fluctuations of the received power at the base station. In this context, power control and signal detection are essential to provide satisfactory Quality of Service (QoS) and to combat the near-far problem in CDMA systems. In this paper, we raised the uplink power control problem for a generalize asynchronous direct-sequence (DS) CDMA system that explicitly incorporate into the analysis: (1) the propagation delays in the network (generally neglected in the literature), (2) the adverse effect of multipath fading for wireless channels, and (3) the asynchronous transmissions in the uplink channels. This framework is used to propose a distributed power control strategy enhanced with linear multiuser receivers. It is shown that through a proper selection of an error function, the nonlinear coupling among active users is transformed into individual linear loops. A Linear-Quadratic-Gaussian (LQG) power control strategy is derived and compared with other approaches from the literature. Simulation results show that the uplink channel variations do not destroy the stability of these power control structures. However, delays in the closed-loop paths can severely affect the stability and performance of the resulting feedback schemes. It is also shown that the use of multiuser detection at the base station can bring significant improvements to the performance of power control.     

Capacity Analysis for Connection Admission Control in Indoor Multimedia CDMA Wireless Communications

In this paper, the capacity analysis for connection admission control is presented for the reverse-link transmission of a packetized indoor multimedia wireless communication system using direct sequence code division multiple access (DS/CDMA). Since CDMA is interference limited, the signal-to-interference-plus-noise ratio criterion is used to check if there is enough system resources (i.e., the CDMA channels and received signal power) for each new connection request. Taking into account the stochastical nature of multimedia traffic, the effective bit rate is used to characterize the resources required by each mobile user and a linear approximation is then used to find the total resources required by all the mobile users already admitted to the system and the new connection request. Transmission errors due to both base station buffer overflow and wireless channel impairments are considered. The capacity of multimedia traffic is determined in such a way that the utilization of the system resources is maximized and, at the same time, the required transmission bit error rate and transmission delay of all users admitted to the system are guaranteed. Computer simulation results are given to demonstrate the performance of the proposed method for capacity analysis.     

Simulation of CDMA system performance with feedback power control

The authors present a summary of the results of a study on CDMA feedback power control in multipath fading radio channels. The signal and interference statistics after power control are presented for a simulated radio system which includes multiple base stations. It is shown that often used analyses based on perfect average power control lead to optimistic capacity results because interference is underestimated by 1-2 dB.<>     

Iterative power control for imperfect successive interference cancellation

Successive interference cancellation (SIC) is a technique for increasing the capacity of cellular code-division multiple-access (CDMA) systems. To be successful, SIC systems require a specific distribution of the users' received powers, especially in the inevitable event of imperfect interference cancellation. This apparent complication of standard CDMA power control has been frequently cited as a major drawback of SIC. In this paper, it is shown that surprisingly, these "complications" come with no additional complexity. It is shown that 1-bit UP/DOWN power control-like that used in commercial systems-monotonically converges to the optimal power distribution for SIC with cancellation error. The convergence is proven to within a discrete step-size in both signal-to-noise plus interference ratio and power. Additionally, the algorithm is applicable to multipath and fading channels and can overcome channel estimation error with a standard outer power control loop.     

Superposition Coding with Unequal Error Protection for the Uplink of Overloaded DS-CDMA System

The overloaded CDMA schemes exploited in direct sequence CDMA (DS-CDMA) systems are mainly to accommodate a greater number of users than the available spreading factor N. In this paper, a superposition coding CDMA (SPC-CDMA) with unequal error protection (UEP) is proposed as one of the overloaded CDMA schemes for the next generation mobile communication systems. It exploits the available power control in most base stations to adapt the transmitted power of active users in the uplink channel. In this scheme, the active users are divided into G groups and each group consists of K users. The K users share the same spreading sequence and are distinguished by different received power levels. At the receiver side, the system first performs despreading for group detection followed by multiuser receiver to estimate the K user signals in each group. It is shown through simulations that better performance are achieved compared to the conventional DS-CDMA and existing overloaded collaborative spreading CDMA (CS-CDMA) schemes, in additive white Gaussian noise (AWGN) and fading channels. Hence, the proposed scheme maximizes the system capacity K-fold compared to conventional DS-CDMA system without requiring extra spreading codes, with average signal to noise ratio (SNR) cost of only 1dB and 2 dB over AWGN and fading channels respectively at BER of 10^?3. On the other hand, for the same N, K and power constraints, SPC-CDMA scheme achieves twofold increase in data rate with 0.7 and 4 dB gains over AWGN and fading channels respectively, compared with overloaded CS-CDMA scheme in the same system capacity. In addition, the proposed scheme can also attain different levels of UEP for different users?? requirements by adjusting their fractions of transmitted powers.     

Effect of power control imperfections on the reverse link of cellular CDMA networks under multipath fading

In this paper, we present an analytical approach for the evaluation of the impact of power control errors on the reverse link of a multicell direct sequence code-division multiple access (CDMA) system with fast power control under multipath fading. Unlike many previous papers, the joint effect of multipath fading and fast power control on interference statistics is explicitly accounted for and mobiles are assumed to connect to a base station according to a minimum attenuation criterion. Both the average bit error rate (BER) and the outage probabilities that a user experiences are estimated. The results have been used to evaluate the system capacity from two points of view. First, the maximum capacity supported by the system in order to maintain an average BER below a prescribed level has been calculated. Second, the maximum capacity possible to ensure that the outage probability does not exceed a set limit is analyzed. Capacity is shown to be significantly affected by the imperfections of power control. Our results can be used to quantify the relative capacity loss due to fast power control errors in a cellular CDMA network affected by slow fading, multipath fading, and cochannel interference.     

CDMA系统下行链路的干扰抵消

CDMA蜂窝移动通信系统是一种采用多址技术的通信系统，即采用不同的地址码来区分用户、基站和信道。然而由于其在多径衰落信道中的自相关和互相关特性的不理想造成了多址干扰。在扩频通信系统的下行链路中，有效地抵消多址干扰是进一步改善系统性能和提高系统容量的重要途径。本文提出一种应用于CDMA下行链路的干扰抵消算法，分析了下行链路接收机的实现原理及过程，并对其中的关键算法进行了详细地分析，仿真结果表明，所选取的下行接收算法能改善系统的性能。     

Performance of closed-loop power control in DS-CDMA cellularsystems

In situations where the round-trip delay between the mobile and the base stations is smaller than the correlation time of the channel, power control schemes using feedback from the base station can effectively compensate for the fast fading due to multipath. We study several closed-loop power control (CLPC) algorithms by analysis and detailed simulation. We introduce a new loglinear model for analyzing the received power correlation statistics of a CLPC scheme. The model provides analytical expressions for the temporal correlation of the power controlled channel parameterized by the update rate, loop delay, and vehicle speed. The received power correlation statistics quantify the ability of closed-loop power control to compensate for the time-varying channel. To study more complex update strategies, detailed simulations that estimate the channel bit-error performance are carried out. Simulation results are combined with coding bounds to obtain quasi-analytic estimates of the reverse link capacity in a direct-sequence code-division multiple-access (DS-CDMA) cellular system. The quasi-analytic approach quantifies the performance improvements due to effective power control in both single-cell and multicell DS-CDMA systems operating over both frequency-nonselective and frequency-selective fading channels. The effect of nonstationary base stations on the system performance is also presented     

Multiservice/multirate pure CDMA for mobile communications

Future mobile communication systems should be able to support a wide range of services with different bit rates. Spread-spectrum code-division multiple-access (CDMA) techniques have attracted much attention to be employed in such a system. Different techniques of CDMA could be used to map low-, medium-, and high-bit rates data into the same allocated bandwidth, including pure or wide-band CDMA, FDM/FH/CDMA, TDM/TH/CDMA, or a hybrid of these techniques. This paper investigates multirate pure CDMA using multiuser interference statistics derived for both Gaussian and Rayleigh fading channels. Approximation of multiuser/multipath interference, in general, helps in the theoretical approach to error performance evaluation and, in particular, is quite useful for simulation approach in a fading channel. Some results of a multirate pure CDMA system with two services (low- and high-bit rates), for both BPSK and DPSK modulation schemes, are presented and compared     

Parallel Interference Cancellation in Multiuser CDMA Channel Estimation

Parallel interference cancellation (PIC) based channel parameter estimators for frequency selective fading channels are proposed for the uplink in code-division multiple-access (CDMA) mobile communication systems. The performance of PIC based algorithms depends heavily on the quality of the multiple-access interference estimates, which can be improved by using adaptive channel estimation filters. The performance of two adaptive complex channel coefficient estimation filters has been verified in a fading channel by computer simulations. According to the results, the PIC based adaptive channel estimators outperform clearly conventional, successive interference cancellation, and decorrelation based adaptive channel estimators. The PIC method is also used in delay tracking. By using the principles of sample-correlate-choose-largest (SCCL) delay trackers, a robust algorithm for multiuser delay tracking in fading channels is obtained.     

Performance of DS-CDMA with imperfect power control operating overa low earth orbiting satellite link

The analysis of both the performance and capacity of direct sequence CDMA in terrestrial cellular systems has been addressed in the technical literature. It has been suggested that CDMA be used as a multiple access method for satellite systems as well, in particular for multispot beam low Earth orbit satellites (LEOS). One is tempted to argue that since CDMA works well on terrestrial links, it will nominally work as well on satellite links. However, because there are fundamental differences in the characteristics of the two channels, such as larger time delays from the mobile to the base station and smaller multipath delay spreads on the satellite channels, the performance of CDMA on satellite links cannot always be accurately predicted from its performance on terrestrial channels. In the paper, the authors analytically derive the performance of a CDMA system which operates over a low Earth orbiting satellite channel. They incorporate such effects as imperfect power control and dual-order diversity to obtain the average probability of error of a single user     

Direct sequence CDMA power control, interleaving, and coding

The authors develop and analyze models of power control that consider other aspects of code-division multiple access (CDMA) systems, such as interleaving and coding on the land mobile radio channel. The orientation is that a power control scheme keeps the received powers at the base station almost equal, and the performance degradation incurred if the powers are not exactly equal will be quantified. In doing so, the authors consider the performance implications of control latency and a maximum speech delay constraint. Because of positive correlations between the fading channel amplitudes, the effectiveness of the combination of interleaving and coding in combating the effects of power variations due to slow Rayleigh fading is reduced. It is shown that power control and interleaving/coding are most effective in complementary parameter regions, thus providing a degree of robustness for both fast and slow Rayleigh fading     

Multiuser channel estimation and tracking for long-code CDMA systems

Channel estimation techniques for code-division multiple access (CDMA) systems need to combat multiple access interference (MAI) effectively. Most existing estimation techniques are designed for CDMA systems with short repetitive spreading codes. However, current and next-generation wireless systems use long spreading codes whose periods are much larger than the symbol duration. We derive the maximum-likelihood channel estimate for long-code CDMA systems over multipath channels using training sequences and approximate it using an iterative algorithm to reduce the computational complexity in each symbol duration. The iterative channel estimate is also shown to be asymptotically unbiased. The effectiveness of the iterative channel estimator is demonstrated in terms of squared error in estimation as well as the bit error rate performance of a multistage detector based on the channel estimates. The effect of error in decision feedback from the multistage detector (used in the absence of training sequences) is also shown to be negligible for reasonable feedback error rates using simulations. The proposed iterative channel estimation technique is also extended to track slowly varying multipath fading channels using decision feedback. Thus, an MAI-resistant multiuser channel estimation and tracking scheme with reasonable computational complexity is derived for long-code CDMA systems over multipath fading channels.     

The coarse acquisition performance of a CDMA overlay system

The coarse acquisition performance of a code-division multiple-access (CDMA) overlay system operating in a mobile communications environment is considered. Specifically, a CDMA system supporting communication between several mobile units and one base station shares the frequency band with an existing narrowband user. At the CDMA base station receivers, narrowband interference rejection filters are used to suppress the narrowband user's energy. It is demonstrated that in a nonfading environment the presence of the narrowband user does not severely affect the acquisition performance when the ratio of its bandwidth to the CDMA bandwidth is small. As the ratio becomes larger, the acquisition performance degrades, but the use of the interference rejection filter still significantly decreases the time to acquire. When flat Rician fading is introduced, the acquisition performance of the overlay system degrades, especially when the power in the direct component is small     

Research on fuzzy self-adaptive PI-Smith control in long time-delay system

The long time-delay often exists in industrial process.In order to overcome the big overshoot and long regulating time of the long time-delay system control,a new fuzzy self-adaptive PI-Smith control method is proposed.This method combines the Smith predictive control with fuzzy self-adaptive proportional-integral(PI)control.The traditional proportional-integral-derivative(PID)controller in Smith predictive control is replaced by fuzzy PI controller which utilizes the principle of fuzzy control to tune parameters of PI controller on-line.The results of simulation for electric furnace show that the method has the advantages of shortening regulating time,no overshoot,no steady-state error,excellent control accuracy,and good adaptive ability to the change of system model.     

Capacity, throughput, and delay analysis of a cellular DS CDMAsystem with imperfect power control and imperfect sectorization

An analytical model is developed to evaluate the performance of a cellular slotted DS CDMA system in terms of user capacity, throughput, and delay for the reverse link, i.e., from mobile to base station, considering interference from both home cell and adjacent cells. The user capacity is studied for voice communications and the throughput and delay are investigated for data communications. The effect of both imperfect power control and imperfect sectorization on the performance is investigated. It is shown that the system is rather sensitive to small power control errors and that voice activity monitoring and sectorization are good methods to improve the performance of cellular DS CDMA systems