Effect of MgO/Al2O3 ratio on the crystallization behaviour of Li2O–MgO–Al2O3–SiO2 glass-ceramic and its wettability on Si3N4 ceramic

The composition governs the crystallization ability, the type and content of crystal phases of glass-ceramics. Glass-ceramic joining materials have generated more research interest in recent years. Here, we prepared a novel Li₂O–MgO–Al₂O₃–SiO₂ glass-ceramic for the application of joining Si₃N₄ ceramics. We investigated the influence of the MgO/Al₂O₃ composition ratio on microstructure and crystallization behaviour. The crystallization kinetics demonstrated that the glasses had excellent crystallization ability and high crystallinity. β-LiAlSi₂O₆ and Mg₂SiO₄ were precipitated from the glass-ceramics, and the increase of MgO concentration was conducive to the precipitation of Mg₂SiO₄. Among the glass-ceramic samples, the thermal expansion coefficient of LMAS2 glass-ceramic was 3.1 × 10^?6/°C, which was very close to that of Si₃N₄ ceramics. The wetting test showed that the final contact angle of the glass droplet on the Si₃N₄ ceramic surface was 32° and the interface was well bonded.     

Contribution of some transition metal oxides to crystallization and electro-thermal properties of glass-ceramics

Lithium di-silicate (LS₂) glass-ceramics modified with copper oxide using the formula: 34.83Li₂O–xCuO–(65.17-x)SiO₂ (where; x = 1, 2, 4 and 6 mol%) were prepared by melt-quenching followed by controlling heat-treatment. 6 mol% of MnO or Fe₂O₃ transition metal oxides was added instead of SiO₂ in the high CuO-content composition. The effect of the transition cations on phase formation, microstructure, density, thermal expansion, and electrical conductivity was investigated as a function of the controlled crystallization. Results show that up to 4 mol%, Cu⁺² was hosted in stable Li₂Si₂O₅ structure. This enhanced the crystal formation, including Li₂Si₂O₅ and its solid solution (ss), Li₂SiO₃, Li₂Cu₅(Si₂O₇)₂, CuMn₆SiO₁₂, LiFeSi₂O₆ (ss), and the orthosilicate Li₂FeSiO₄ (ss). The prepared materials had different density values ranged from 2.35 to 2.79 g/cm³ for glass and varied from 2.43 to 3.15 g/cm³ for glass–ceramics, whereas the α-values of glass-ceramics ranged in the 95–165 × 10⁻⁷/°C. The progress of electrical properties in glass-ceramics, as a function of composition, was studied. It was markedly improved by adding different transition cations especially, Fe⁺³. The study reveals that the incorporation of transition metal ions in LS₂ composition has a positive effect on the physical-chemical properties of the prepared glass-ceramics. Therefore, it constitutes to prepare future glass-ceramic applications as hermetic seals of metals as well solid electrolyte materials.     

Boroaluminosilicate glass-ceramics containing mullite-type Cr3+:Al4B2O9 nanocrystals with broadband near-infrared luminescence

Multi-component silicate glass is an ideal matrix for fabricating glass-ceramics because of its excellent physical-chemical stability and high optical transmittance. In this paper, a series of Cr³⁺ doped multi-component silicate glasses were designed for the preparation of glass-ceramics that crystalizes mullite-type Cr³⁺:Al₄B₂O₉ nanocrystals. When excited at 450 nm, the obtained GCs exhibit a broadband NIR luminescence band covering a spectral region from 650 to 1200 nm. Two different crystallographic sites of Cr³⁺ in Al₄B₂O₉ nanocrystal are considered to account for the observed broadband luminescence. Due to the controllable size and uniformly dispersion of precipitated nanoparticles, this boroaluminosilicate glass-ceramic could find potential applications as monolithic near-infrared light sources in solid-state light emitting devices.     

Sintering behavior,structure and dielectric properties of CuO-ZnO-MgO-B2O3 glass-ceramics for ULTCC applications

High performance ultra-low temperature co-fired ceramic (ULTCC) materials were prepared from CuO- MgO- ZnO- Al₂O₃- B₂O₃- Li₂O glass-ceramics. The sintering behaviors, crystalline phase evolution, microstructure and dielectric properties, as well as their compatibility with Ag and Al electrodes, were investigated. With the suitable substitution of MgO for ZnO, the dielectric properties of glass-ceramics were improved. It is mainly associated with the fine microstructure, highly crystallinity, and decrease in tetrahedral distortion in the crystal lattice. All the glasses completed the densification at 575–600 °C, and ZnB₄O₇ is the only crystalline phase precipitated from the glasses. Moreover, the glass-ceramic with 1 wt% MgO sintered at 575 °C for 5 h, exhibited low relative permittivity ~ 7.1 and low dielectric loss ~ 6.40 × 10^?4. And the glass-ceramic with 4 wt% MgO sintered at 600 °C for 5 h, also displayed low relative permittivity ~ 7.1 and low dielectric loss ~ 5.77 × 10^?4. Both two glasses have good sintering compatibility with silver and aluminum electrodes, which provided high potential for ULTCC application.     

Highly translucent nanostructured glass-ceramic

Transparent and translucent glass-ceramics (GCs) are found in an increasing number of domestic and high-technology applications. In this paper, we evaluated and optimized the effects of two-stage heat treatments on the resulting crystalline phases and microstructure of a glass of the SiO₂–Li₂O–P₂O₅–TiO₂–CaO–ZnO–Al₂O₃ system. The objective was to develop a transparent nanostructured glass-ceramic (GC). After numerous heat treatment trials, we found that a long nucleation period of 72 h at 455 °C followed by a crystal growth treatment at 660 °C for 2 h resulted in a highly translucent GC having homogenously distributed nanocrystals. The relatively high amount of P₂O₅ (2.5 mol%) induced the formation of lithium disilicate as the main crystal phase. We thus developed a GC having crystals under 50 nm, with a high crystallized fraction (52%vol. Li₂Si₂O₅ and 26% vol Li₂SiO₃), transmittance of approximately 80% in the visible spectrum for 1.2 mm thick specimens, nano hardness of 8.7 ± 0.1 GPa (load of 400 mN), a high elastic modulus of 138 ± 3 GPa as measured by nanoindentation, and good flexural strength (350 ± 40 MPa) as measured by ball-on-3 balls tests. Due to its high content of Li⁺, this GC has the potential to be chemically strengthened and can be further developed to be used in a number of applications, such as on displays of electronic devices.     

Influence of Al2O3/SiO2 ratio in multicomponent LNAS glasses and glass-ceramics on the crystallization behavior,microstructure and mechanical performance

Transparent glass-ceramics containing eucryptite and nepheline crystalline phases were prepared from alkali (Li, Na) aluminosilicate glasses with various mole substitutions of Al₂O₃ for SiO₂. The relationships between glass network structure and crystallization behavior of Li₂O–Na₂O–Al₂O₃–SiO₂ (LNAS) glasses were investigated. It was found that the crystallization of the eucryptite and nepheline in LNAS glasses significantly depended on the concentration of Al₂O₃. LNAS glasses with the addition of Al₂O₃ from 16 to 18 mol% exhibited increasing Q⁴ (mAl) structural units confirmed by NMR and Raman spectroscopy, which promoted the formation of eucryptite and nepheline crystalline phases. With the Al₂O₃ content increasing to 19–20 mol%, the formation of highly disordered (Li, Na)₃PO₄ phase which can serve as nucleation sites was inhibited and the crystallization mechanism of glass became surface crystallization. Glass-ceramics containing 18 mol% Al₂O₃ showed high transparency ～84% at 550 nm. Moreover, the microhardness, elastic modulus and fracture toughness are 8.56 GPa, 95.7 GPa and 0.78 MPa m^1/2 respectively. The transparent glass-ceramics with good mechanical properties show high potential in the applications of protective cover of displays.     

Influence of Gd content on the structural,Raman spectroscopic and magnetic properties of CoFe2O4 nanoparticles synthesized by sol-gel route

The structural and magnetic properties of sol-gel synthesized Gd doped (x = 0.00 to 0.15) CoFe₂O₄ nanoparticles (NPs) have been studied. The x-ray diffraction (XRD) and FTIR spectroscopy along with Raman spectra confirmed the formation of face centered cubic inverse spinel structure. TEM images showed the NPs are well-dispersed with average particle size 30 nm. Room temperature magnetic measurement showed the value of coercivity fluctuates from 353 Oe to 1060 Oe for different % of Gd content. The maximum coercivity, saturation magnetization, magnetic moment, magnetic anisotropy, remnant magnetization found for 0.03% Gd content are 1060.19 Oe, 77.53 emu/gm, 3.29 μ, 4.11 × 10⁴ erg/cm³, 32.38 emu/gm, respectively. The large value of coercivity indicated that the interparticle interactions and crystalline anisotropy are high. Thus CoFe_2-xGd_xO₄ magnetic NPs might be a potential candidate for data processing, automotive and telecommunications.     

A novel high-strength lithium disilicate glass-ceramic featuring a highly intertwined microstructure

To achieve long-term clinical performance and wider application of glass-ceramic dental restorations, it is urged to enhance the mechanical properties of glass-ceramic materials. In this study, a high-strength lithium disilicate glass-ceramic was developed in a SiO₂–Li₂O–Al₂O₃–MgO–P₂O₅–ZrO₂ related glass system, which demonstrates a high flexural strength of 562 ± 107 MPa. In this high-strength glass-ceramic, the microstructure features highly intertwined colonies of lithium disilicate. This novel microstructure effectively contributes to the improvement of flexural strength. The minor crystalline phases (β-quartz, MgAl₂Si₄O₁₂, and Li₃PO₄) embedded within the Li₂Si₂O₅ (LS₂) crystal colonies and residual glass matrix could further strengthen the glass-ceramic. The development process of such a novel microstructure and its possible formation mechanism are proposed. This material could be an excellent candidate for restorative dental applications up to three-unit posterior bridges.     

Effect of substitution of ZrO2 by SnO2 on crystallization and properties of environment-friendly Li2O–Al2O3–SiO2 system (LAS) glass-ceramics

In this study, a transparent and environmentally friendly Li₂O–Al₂O₃–SiO₂ (LAS) glass-ceramic was prepared by melt-quenching and two-step heat treatment. The influence of the substitution amount of ZrO₂ by SnO₂ on the crystallization, microstructure, transparency, and mechanical properties of LAS glass and glass-ceramics was investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Ultraviolet–visible Spectrophotometer, three-point bending strength test, and microhardness test. The results indicate that the main crystalline phase of LAS glass ceramics was a β-quartz solid solution when heat treated at 780 °C for 2 h and 870 °C for 1.5 h. When the substitution amount of ZrO₂–SnO₂ increased from 0.4 mol% to 2.5 mol%, the grain size and thermal expansion coefficient of LAS glass-ceramics first decreased and then increased, and the crystallinity first increased and then decreased. When the substitution amount of ZrO₂–SnO₂ was 0.8 mol%, the transparency of the LAS glass-ceramics was maximum, the bending strength was 96 MPa, and the Vickers hardness was 10.9 GPa.     

Color-tunable and white emission of Tm3+ doped transparent zinc silicate glass-ceramics embedding ZnO nanocrystals

Tm³⁺ doped zinc silicate glass-ceramics composed of SiO₂-Al₂O₃-ZnO-K₂O-Tm₂O₃ embedded with ZnO nanocrystals were successfully fabricated by melt-quenching method with subsequent heat treatment. Tm³⁺ ions and ZnO nanocrystals were introduced as blue and yellow luminescence centers, respectively. The effects of heat treatment, excitation wavelength and Tm³⁺ doping concentration on the photoluminescence behaviors of these glass-ceramics were studied. Short-time (5 minutes) heat treatment was considered as the optimal heat treatment time, which facilitates simultaneously emitting narrow blue peak located at 453 nm and a broad yellow band centered at 580 nm. Blue and yellow emissions could be attributed to the ¹D₂ → ³F₄ transition of Tm³⁺ and Zn_i/O_i-related defect emission of ZnO nanocrystals, respectively. The combination of these two emissions allows the realization of white light emitting in the glass-ceramic samples. Furthermore, tunable luminescent color and chromaticity coordinates, including yellow, white and blue, can be realized by varying the pumping wavelengths as well as the content of Tm³⁺ dopant in the glass matrix. Nearly perfect white light emission with Commission Internationale de l'Eclairage coordinate (x = 0.33, y = 0.32) was achieved for the 0.05 mol% Tm³⁺ doped glass-ceramic embedding ZnO nanocrystals by heat treatment at 750°C for 5 minutes under the excitation of 360 nm. These luminescent glass-ceramics doped with Tm³⁺ ion and ZnO nanocrystals could be a promising candidate for white light emitting devices under near-ultraviolet excitation.     

Raman spectra and ferromagnetism of nanocrystalline Fe-doped Li0.43Nb0.57O3+δ

Nanocrystalline undoped LiNbO₃ and LiNbO₃ doped with x% Fe (x=0.5, 1, 2, 3, 5) were synthesized via a combustion method. Fe-doped LiNbO₃ with a 1 mol% doping concentration exhibited a room-temperature ferromagnetism of 0.06 emu/g. There was an abrupt change in properties when the doping concentration of Fe reached 2 mol%, where the lattice contracted obviously and the saturation magnetization (M_s) increased an order of magnitude to 0.275 emu/g; M_s slightly increased to its maximum value of 1.18 emu/g when the doping concentration was further increased to 5 mol%. Raman spectra showed that the substitution of Li by Fe occurred at small doping concentrations and the substitution of Nb at the Nb site occurred at higher doping concentrations. The results suggest that Fe³⁺ replaced Nb_Li⁴⁺ first and the weaker ferromagnetism is due to the minor fraction of Nb_Li⁴⁺ in LiNbO₃. Then, Fe³⁺ substituted Li⁺, resulting in large lattice distortion and much stronger spin coupling of Fe–Nb. Finally, the excess Fe³⁺ started to replace Nb⁵⁺at the Nb sites, where the spin coupling of Fe–Nb is weaker than that at the Li site. An analysis of the experimental results suggests that the congruent Fe-doped LiNbO₃ is a promising room-temperature single-phase multiferroic material.     

Magnetic characteristics and optical band alignments of rare earth (Sm+3, Nd+3) doped garnet ferrite nanoparticles (NPs)

Yttrium iron garnet (YIG) nanoparticles (NPs) doped with rare earth (RE) metal ions (Y_2.5Sm_0.5Fe₅O₁₂, Y_2.5Nd_0.5Fe₅O₁₂) were successfully synthesized by sol-gel auto combustion approach. The cubic crystalline structure and morphology of the prepared garnet ferrite NPs were analyzed by X-ray diffractometer (XRD) and field emission scanning electron microscopy (FESEM). The cubic crystalline garnet phase of the synthesized YIG, Sm-YIG and Nd-YIG samples was successfully achieved at 950 °C sintering temperature. The force constant and absorption bands were estimated by using Fourier transform infrared spectroscopy (FTIR). The doping effect of RE metal ions on the chemical states of YIG were examined by x-ray photoelectron microscopy (XPS). The valence band (from 12.63 eV to 13.22 eV), conduction band (from 10.89 eV to 11.34 eV) edges and optical bandgap values of RE doped YIG samples were calculated using UV–Vis spectroscopy and ultraviolet photo electron spectroscopy (UPS). The magnetic analysis of the prepared NPs was studied using vibrating sample magnetometer (VSM). The XPS analysis of RE doped YIG samples exhibit the existence of RE (Sm⁺³, Nd⁺³) contents on the surface of YIG ferrite by decreasing the oxygen lattice in garnet structure. The optical bandgap (from 1.74 eV to 1.88 eV) explains the semiconducting nature of the synthesized NPs. The UPS results confirm the valence band position of YIG doped samples. The saturation magnetization and remanence of RE doped garnet ferrite samples increased from 13.45 to 18.83 emu/g and 4.06–6.53 emu/g, respectively.     

Structural,optical, electrical,dielectric, molecular vibrational and magnetic properties of La3+ doped Mg–Cd–Cu ferrites prepared by Co-precipitation technique

Ferrites are among the most frequently investigated materials mainly due to interesting and practically different properties. Therefore, easily and cost-effective lanthanum doped Mg_0.5Cd_0.25Cu_0.25Fe_2-xLa_xO₄ (x = 0.0, 0.0125, 0.025, 0.0375 and 0.05) ferrites were synthesized by a co-precipitation route, a comprehensive characterisation of their structural, optical, electric, dielectric, molecular vibrational, and magnetic properties were carried out. X-ray diffraction analysis confirmed the formation of a cubic spinel structure. Variations in frequency bands were also observed with amplification in optical band gap energy (2.95 – 3.38 eV) due to La³⁺ ions insertion. The electric resistivity had opposite trends at low and high temperatures with increasing La³⁺ content. The Curie temperature, activation energy, and drift mobility were also determined to have values consistent with the semiconducting behavior of the soft ferrites. The saturation magnetization (M_S) has a maximum value 49.385 emu/g with remanent magnetization (M_r) was 34.928 emu/g and coercivity 661.4 Oe for La³⁺ concentration x = 0.05. The minimum dielectric loss was observed for La³⁺ concentration x = 0.025. Moreover, the resistivity (ρ) has a maximum value of 7.95 × 10⁴ Ω cm for La³⁺ concentration x = 0.025. The calculated frequency range of La³⁺ doped Mg–Cd–Cu ferrites was detected in the microwave range (3.36 – 10.80 GHz), suggesting the potential application of the materials in longitudinal recording media and microwave absorbance.     

Structural,dielectric and magnetic properties of Bi–Mn doped SmFeO3

We have studied the structural, magnetic, dielectric and impedance properties of the Sm_1-xBi_xFe_1-yMn_yO₃ [SmFeO₃ (SFO), Sm_0.9Bi_0.1FeO₃ (SBFO), Sm_0.9Bi_0.1Fe_0.9Mn_0.1O₃ (SBFMO)] polycrystalline samples synthesized by solid-state reaction method. Rietveld refinement of room temperature (RT) powder x-ray diffraction pattern confirms the orthorhombic crystal structure with Pnma/Pbnm space group. The average particle size of Bi doped and co-doped (Bi–Mn) samples determined from SEM analysis are 5.6 μm and 5.2 μm, respectively. Room temperature field-dependent magnetization increases, suggesting the presence of magnetic contribution due to the Rare earth-Fe ion interaction which persists even at RT. However, with co-doping of Bi and Mn, a decrease in magnetization is observed, which corresponds to the dilution of Fe³⁺-Fe³⁺ interactions due to the presence of Mn³⁺ ions. The observed values of magnetization at 90 kOe for Bi doped sample is (2.87 emu/g) approximately two times and for codoped (0.7 emu/g) sample is nearly half of that of pristine sample (1.51 emu/g). Dielectric measurements as a function of frequency/temperature and impedance analysis using equivalent circuit model reveal grain and grain boundary contributions of SBFO (at high temperature) and SBFMO (for all temperature) samples towards the electrical properties indicating the electrically heterogeneous nature of these samples. However, for SFO sample grain contribution is dominant. Observed value of dielectric constant varies from ~10³-10⁴ with Bi–Mn doping. The conduction mechanism of the studied samples has been explained by considering Jonscher power law. Arrhenius law fitting of AC conductivity data manifests two types of conduction mechanisms in these samples. The depressing nature of the semicircular arc observed in the Nyquist plot of all the samples indicates the presence of a non-Debye type of relaxation.     

Sulfide Glass-Ceramic Electrolytes for All-Solid-State Lithium and Sodium Batteries

Sulfide glass-ceramic electrolytes with Li⁺ or Na⁺ ion conduction have been developed in last decade. High-temperature phases of Li₇P₃S₁₁ and cubic Na₃PS₄ are precipitated from mother glasses, and the obtained glass-ceramics show higher conductivity than the mother glasses. It is difficult to synthesize those high-temperature phases by conventional solid-state reaction, and glass electrolytes are thus important as a precursor for forming high-temperature phases. The highest conductivities at 25°C of 1.1 × 10⁻² S/cm for Li⁺ ion conductor (Li₇P₃S₁₁) and 7.4 × 10⁻⁴ S/cm for Na⁺ ion conductor (Na_3.06P_0.94Si_0.06S₄) are achieved in sulfide glass-ceramic electrolytes. All-solid-state batteries with sulfide glass-ceramic electrolytes were fabricated by cold press at room temperature. Sulfide electrolytes have favorable mechanical properties to form favorable solid–solid contacts in solid-state batteries by pressing without heat treatment. All-solid-state Li-In/S and Na-Sn/TiS₂ cells using sulfide glass-ceramic electrolytes operate as secondary batteries and exhibit good cycle performance at room temperature.     

Physical and structural characteristics of sol–gel derived CaO–B2O3–SiO2 glass-ceramics and their dielectric properties in the 5G millimeter-wave bands

In this study, sol–gel derived CaO–B₂O₃–SiO₂ glass-ceramics with a set B₂O₃ content of 22.2 mol% and CaO/SiO₂ ratios ranging between 0.15 and 0.27 were used for low-temperature cofired ceramic applications in the 5G millimeter-wave bands. X-ray diffraction analysis, scanning electron microscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy data indicated that, unlike the typical CaO–B₂O₃–SiO₂ glass-ceramics prepared via melting resulted in the presence of calcium silicates, the CaO–B₂O₃–SiO₂ glass-ceramics in this study comprised only an amorphous phase containing different amounts of CaB₂O₄ crystallites depending on the CaO/SiO₂ ratio. Among the formulations evaluated, the 14.5CaO?22.2B₂O₃?63.3SiO₂ glass-ceramic sintered at 950 °C exhibited a dielectric constant of 4.33 and a dielectric loss of 0.0012 at 60 GHz, which conferred its low signal propagation delay and low signal attenuation in applications. In addition, the electrical resistivity, breakdown strength, thermal conductivity, and coefficient of thermal expansion of the 14.5CaO?22.2B₂O₃?63.3SiO₂ glass-ceramic were 1.72 × 10¹² Ω cm, 15.49 kV/mm, 1.70 W/mK, and 4.1 ppm/°C, respectively. The 14.5CaO?22.2B₂O₃?63.3SiO₂ glass-ceramic exhibited excellent insulating properties, facilitating its use as substrate material; moreover, its thermal properties matched those of Si and GaAs.     

Preparation and luminescence properties of Eu2O3 doped glass-ceramics containing NaY(MoO4)2

Eu₂O₃ doped transparent glass-ceramics containing NaY(MoO₄)₂ crystalline phase were prepared via melting-crystallization. The optimum heat treatment condition (660℃/3h) was determined by DSC, XRD, SEM and transmittance curves. The transmittance of glass-ceramic can reach 80 % in the visible region. The emission spectra of Eu₂O₃ doped glass-ceramics consist of Eu³⁺ ions characteristic emission peaks at 591nm (⁵D₀→⁷F₁) and 614nm (⁵D₀→⁷F₂). The optimal doping concentration of Eu₂O₃ in the glass-ceramics is 0.9 mol%, and fluorescence lifetime is 1.37042ms. The change of the ratio of red emission intensity to orange emission intensity leads to the shift of chromaticity coordinates from orange to red region, and the chromaticity coordinate (0.6337, 0.3635) of 0.9 mol% Eu₂O₃ doped glass-ceramic is closest to the standard red light coordinate. The results show that this kind of glass-ceramic is expected to be good red emission material.     

Role of MgO in lowering glass transition temperature and increasing hardness of lithium silicate glass and glass-ceramics

The effect of variation of MgO (1.5, 4.5 and 7.5 mol%) content on glass structure, crystallization behavior, microstructure and mechanical properties in a Li₂O–K₂O–Na₂O–CaO–MgO–ZrO₂–Al₂O₃–P₂O₅–SiO₂ glass system has been reported here. Increased amount of MgO enhanced the participation of Al₂O₃ as a glass network former along with [SiO₄] tetrahedra, reducing the amount of non-bridging oxygen (NBO) and increasing bridging oxygen (BO) amount in glass. The increased BO in glass resulted in a polymerized glass structure which suppressed the crystallization and subsequently increased the crystallization temperature, bulk density, nano hardness, elastic modulus in the glasses as well as the corresponding glass-ceramics. MgO addition caused phase separation in higher MgO (7.5 mol%) containing glass system which resulted in larger crystals. The nano hardness (～10 GPa) and elastic modulus (～127 GPa) values were found to be on a much higher side in 7.5 mol% MgO containing glass-ceramics as compared to lower MgO containing glass-ceramics.     

Crystallization behavior and mechanical properties of high strength mica-containing glass-ceramics from granite wastes

The high-strength mica-containing glass-ceramics were prepared from granite wastes by bulk crystallization. The influences of SiO₂/Al₂O₃ molar ratio (S/A = 7.72, 9.62, 12.58, 17.82 and 29.67) on the crystallization behavior, microstructure, mechanical properties and machinability of glass-ceramics were investigated. The results demonstrated that the polymerization degree of the glass network decreased with the S/A ratio increasing, which further caused the decrease in glass transition temperature and crystallization temperatures. The increase in the S/A ratio promoted the precipitation of diopside, hectorite, kalsilite and tainiolite in glass-ceramics when the samples were heated at 750 °C, while inhibiting the precipitation of forsterite. For the glass-ceramics crystallized at 800 and 900 °C, the main crystalline phases transformed from diopside, forsterite, and nepheline to diopside, kalsilite, and tainiolite, with the S/A ratio increasing. As the SiO₂ gradually replaced Al₂O₃, the morphology of crystals changed from lamellar to granular, while the mean size of crystals reduced. The Vickers-Hardness values of glass-ceramics crystallized at 800 and 900 °C ascended with S/A ratio rising, and the values were above 6.30 GPa. The bending strength of most glass-ceramics is stable between 90 and 140 MPa, among which the maximum bending strength is 133.28 ± 14.81 MPa. The fracture toughness of the glass-ceramic crystallized at 800 and 900 °C declined, while that at 700 °C increased with a larger S/A ratio. Glass-ceramics after heat-treated at 900 °C with S/A ratio of 9.62 had the largest fracture toughness of 3.28 ± 0.15 MPa m^1/2. In preliminary tests of machinability, glass-ceramic after heat-treated at 900 °C with S/A ratio of 9.62 showed better results.     

Structural and magnetic properties of Co/Al2O3 cermet synthesized by mechanical ball milling

Cobalt nanoparticles in the alumina matrix were synthesized using high energy mechanical ball milling of Co₃O₄ and Al powders mixture. The effect of ball mill time of 1 up to 12 h on the phase formation and crystalline lattice of the samples was investigated by the fitting of the X-ray diffraction patterns with Fullprof software and Rietveld method. The results show that 6 h milling of the primary powders yields a nanocomposite of Co/Al₂O₃ cermet. The formation of Co/Al₂O₃ nanocomposite was confirmed by a morphological study using scanning electron microscopy and transmission electron microscopy. The prepared nanocomposite by 12 h ball mill time has ferromagnetic properties with a high saturation magnetization value of 118 emu/g. Also, using Henkel plot analysis, it was shown that there are strong dipole-dipole magnetic interactions between the prepared cobalt nanoparticles in the Al₂O₃ matrix.